SBE812 Ordering number : EN8966 SBE812 Schottky Barrier Diode 60V, 1.0A Rectifier Applications • High frequency rectification (switching regulators, converters, choppers). Features • • • Small switching noise. Low leakage current and high reliability due to highly reliable planar structure. Ultrasmall package allows applied sets to be made small and thin. Specifications Absolute Maximum Ratings at Ta=25°C (Value per element) Parameter Symbol Repetitive Peak Reverse Voltage Conditions Ratings Unit VRRM VRSM 60 V 65 V Average Output Current IO 1.0 A Surge Forward Current IFSM 10 A Nonrepetitive Peak Reverse Surge Voltage 50Hz sine wave, 1 cycle Junction Temperature Tj --55 to +125 °C Storage Temperature Tstg --55 to +125 °C Electrical Characteristics at Ta=25°C (Value per element) Parameter Symbol Reverse Voltage VR Forward Voltage VF Reverse Current IR Interterminal Capacitance C Reverse Recovery Time trr Thermal Resistance Rth(j-a)1 Rth(j-a)2 Conditions IR=0.2mA IF=1A Ratings min typ Unit max 60 V 0.55 VR=30V VR=10V, f=1MHz IF=100mA, See specified Test Circuit. 0.60 V 30 µA 35 pF 10 Mounted in Cu-foiled area of 1.92mm2✕0.03mm on glass epoxy board Mounted on a ceramic board (1000mm2✕0.8mm) ns 80 °C / W 75 °C / W Marking : SA Any and all SANYO products described or contained herein do not have specifications that can handle applications that require extremely high levels of reliability, such as life-support systems, aircraft's control systems, or other applications whose failure can be reasonably expected to result in serious physical and/or material damage. Consult with your SANYO representative nearest you before using any SANYO products described or contained herein in such applications. SANYO assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all SANYO products described or contained herein. SANYO Electric Co.,Ltd. Semiconductor Company TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN D2605SB MS IM TB-00002015 No.8966-1/4 SBE812 Electrical Connection 0.3 8 7 8 7 6 5 1 2 3 4 1 : Anode1 2 : No Contact 3 : Anode2 4 : No Contact 5 : Cathode2 6 : Cathode2 7 : Cathode1 8 : Cathode1 0.15 6 5 0.25 2.8 2.3 0.25 Package Dimensions unit : mm 7012-001 1 2 3 4 0.65 Top view 0.75 2.9 0.07 1 : Anode1 2 : No Contact 3 : Anode2 4 : No Contact 5 : Cathode2 6 : Cathode2 7 : Cathode1 8 : Cathode1 SANYO : VEC8 trr Test Circuit 50Ω 100Ω 10Ω 10µs 10mA 100mA 100mA Duty≤10% --5V trr IF -- VF IR -- VR 10000 1.0 7 5 Ta=125°C 100°C Reverse Current, IR -- µA 1000 3 2 0.1 7 5 3 2 Ta= 12 100 5°C °C 75° C 50°C 25°C 0° C --25° C Forward Current, IF -- A 3 2 0.01 7 5 3 2 75°C 100 50°C 10 25°C 1.0 0°C 0.1 --25°C 0.01 0.001 0.001 0 0.1 0.2 0.3 0.4 0.5 0.6 Forward Voltage, VF -- V 0.7 0.8 IT10113 0 10 20 30 40 50 Reverse Voltage, VR -- V 60 70 IT10114 No.8966-2/4 Rectangular wave 0.9 (1) 0.8 (2) (4) (3) θ 360° 0.7 Sine wave 0.6 0.5 180° 360° 0.4 0.3 (1)Rectangular wave θ=60° (2)Rectangular wave θ=120° (3)Rectangular wave θ=180° (4)Sine wave θ =180° 0.2 0.1 0 0 0.2 0.4 0.8 0.6 1.0 Average Output Current, IO -- A 60 Rectangular wave (1) θ 40 (2) (4) (3) 360° Sine wave 180° 0.2 (3) R 4.00E--04 Sine wave 360° 180° 3.00E--04 VR 2.00E--04 (4) 1.00E--04 0.00E+00 10 0 20 30 40 50 60 Peak Reverse Voltage, VR -- V 70 IT10116 C -- VR 100 7 5 3 2 10 360° 0 0 (2) 360° θ Rectangular wave V 5.00E--04 (1) 2 *When mounted in reliability operaion board, Rth(J-a)=80°C/W 20 0.4 0.6 0.8 1.0 Average Output Current, IO -- A 1.2 IT10117 IFSM -- t 7 Surge Forward Current, IFSM(Peak) -- A 6.00E--04 3 100 80 (1)Rectangular wave θ=300° (2)Rectangular wave θ=240° (3)Rectangular wave θ=180° (4)Sine wave θ=180° 7.00E--04 IT10115 (1)Rectangular wave θ=60° (2)Rectangular wave θ=120° (3)Rectangular wave θ=180° (4)Sine wave θ=180° 120 PR(AV) -- VR 8.00E--04 Tc -- IO 140 Case Temperature, Tc -- °C 1.2 Average Reverse Power Dissipation, PR(AV) -- W PF(AV) -- IO 1.0 Interterminal Capacitance, C -- pF Average Forward Power Dissipation, PF(AV) -- W SBE812 7 0.1 2 3 5 7 1.0 2 3 5 7 10 Reverse Voltage, VR -- V 2 3 5 7 IT09258 Current waveform 50Hz sine wave 6 IS 20ms t 5 4 3 2 1 0 7 0.01 2 3 5 7 0.1 2 Time, t -- s 3 5 7 1.0 2 3 IT09290 No.8966-3/4 SBE812 Specifications of any and all SANYO products described or contained herein stipulate the performance, characteristics, and functions of the described products in the independent state, and are not guarantees of the performance, characteristics, and functions of the described products as mounted in the customer’s products or equipment. To verify symptoms and states that cannot be evaluated in an independent device, the customer should always evaluate and test devices mounted in the customer’s products or equipment. SANYO Electric Co., Ltd. strives to supply high-quality high-reliability products. However, any and all semiconductor products fail with some probability. It is possible that these probabilistic failures could give rise to accidents or events that could endanger human lives, that could give rise to smoke or fire, or that could cause damage to other property. When designing equipment, adopt safety measures so that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective circuits and error prevention circuits for safe design, redundant design, and structural design. In the event that any or all SANYO products(including technical data,services) described or contained herein are controlled under any of applicable local export control laws and regulations, such products must not be exported without obtaining the export license from the authorities concerned in accordance with the above law. No part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or any information storage or retrieval system, or otherwise, without the prior written permission of SANYO Electric Co., Ltd. Any and all information described or contained herein are subject to change without notice due to product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification" for the SANYO product that you intend to use. Information (including circuit diagrams and circuit parameters) herein is for example only ; it is not guaranteed for volume production. SANYO believes information herein is accurate and reliable, but no guarantees are made or implied regarding its use or any infringements of intellectual property rights or other rights of third parties. This catalog provides information as of December, 2005. Specifications and information herein are subject to change without notice. PS No.8966-4/4