SBS808M Ordering number : ENN8350 SBS808M Schottky Barrier Diode 15V, 1A Rectifier Applications • High frequency rectification (switching regulators, converters, choppers). Features • • • Low forward voltage (IF=0.5A, VF max=0.35V) (IF=1A, VF max=0.43V). Composite type with 2 low VF SBDs in one package, facilitating high-density mounting. Ultrasmall package permitting applied sets to be small and slim. Specifications Absolute Maximum Ratings at Ta=25°C (Value per element) Parameter Symbol Repetitive Peak Reverse Voltage Nonrepetitive Peak Reverse Surge Voltage Average Output Current Surge Forward Current Conditions Ratings VRRM VRSM IO IFSM 50Hz sine wave, 1 cycle Unit 15 V 15 V 1 A 10 A Junction Temperature Tj --55 to +125 °C Storage Temperature Tstg --55 to +125 °C Electrical Characteristics at Ta=25°C (Value per element) Parameter Reverse Voltage Forward Voltage Reverse Current Reverse Recovery Time Conditions VR VF1 IR=0.5mA IF=0.5A VF2 IF=1A VR=6V VR=10V, f=1MHz IR Interterminal Capacitance Thermal Resistance Symbol C trr Rth(j-a) Ratings min typ Unit max 15 V 0.32 0.35 0.39 0.43 V 90 µA 20 IF=IR=100mA, See specified Test Circuit. Mounted on a ceramic board (600mm2✕0.8mm) V pF 10 138 ns °C / W Marking : SD Any and all SANYO products described or contained herein do not have specifications that can handle applications that require extremely high levels of reliability, such as life-support systems, aircraft's control systems, or other applications whose failure can be reasonably expected to result in serious physical and/or material damage. Consult with your SANYO representative nearest you before using any SANYO products described or contained herein in such applications. SANYO assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all SANYO products described or contained herein. SANYO Electric Co.,Ltd. Semiconductor Company TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN 62005SB MS IM TB-00001442 No.8350-1/3 SBS808M Package Dimensions unit : mm 7021-001 Electrical Connection 5 4 1 : Anode 2 : No Contact 3 : Anode 4 : Cathode 5 : Cathode 0.25 Bottom View 1.6 1 0.25 3 2 0.65 1 2 3 Top view 0.07 2.1 0.15 0.3 5 4 5 1 : Anode 2 : No Contact 3 : Anode 4 : Cathode 5 : Cathode 4 0.85 2.0 1 2 3 SANYO : MCPH5 Top View trr Test Circuit 50Ω 100Ω 10Ω 10µs 10mA 100mA 100mA Duty≤10% --5V trr IF -- VF Reverse Current, IR -- µA 0.1 7 5 3 2 0.01 7 5 3 2 --2 5°C 1.0 7 5 3 2 Ta=125°C 100°C 75°C 1000 50°C 100 25°C 10 1.0 --25°C 0.1 0.001 0.01 0 0.1 0.2 0.3 0.4 0.5 Forward Voltage, VF -- V (1)Rectangular wave θ=60° (2)Rectangular wave θ=120° (3)Rectangular wave θ=180° (4)Sine wave θ=180° 0.6 15 IT07151 C -- VR 100 f=1MHz (1) (2) (4)(3) 0.5 0.4 Rectangular wave 0.3 10 Reverse Voltage, VR -- V PF(AV) -- IO 0.7 5 0 IT07150 θ 0.2 360° Sine wave 0.1 Interterminal Capacitance, C -- pF Average Forward Power Dissipation, PF(AV) -- W IR -- VR 100000 10000 Ta =1 2 10 5°C 0° C 75 °C 50 °C 25 °C Forward Current, IF -- A 10 7 5 3 2 7 5 3 2 180° 360° 0 0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 1.1 1.2 1.3 1.4 1.5 Average Output Current, IO -- A IT07152 10 0.1 2 3 5 7 1.0 2 3 5 Reverse Voltage, VR -- V 7 10 2 IT07885 No.8350-2/3 SBS808M IFSM -- t Surge Forward Current, IFSM(Peak) -- A 12 Current waveform 50Hz sine wave 10 IS 20ms t 8 6 4 2 0 7 0.01 2 3 5 7 0.1 2 Time, t -- s 3 5 7 1.0 2 3 IT00626 Specifications of any and all SANYO products described or contained herein stipulate the performance, characteristics, and functions of the described products in the independent state, and are not guarantees of the performance, characteristics, and functions of the described products as mounted in the customer’s products or equipment. To verify symptoms and states that cannot be evaluated in an independent device, the customer should always evaluate and test devices mounted in the customer’s products or equipment. SANYO Electric Co., Ltd. strives to supply high-quality high-reliability products. However, any and all semiconductor products fail with some probability. It is possible that these probabilistic failures could give rise to accidents or events that could endanger human lives, that could give rise to smoke or fire, or that could cause damage to other property. When designing equipment, adopt safety measures so that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective circuits and error prevention circuits for safe design, redundant design, and structural design. In the event that any or all SANYO products(including technical data,services) described or contained herein are controlled under any of applicable local export control laws and regulations, such products must not be exported without obtaining the export license from the authorities concerned in accordance with the above law. No part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or any information storage or retrieval system, or otherwise, without the prior written permission of SANYO Electric Co., Ltd. Any and all information described or contained herein are subject to change without notice due to product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification" for the SANYO product that you intend to use. Information (including circuit diagrams and circuit parameters) herein is for example only ; it is not guaranteed for volume production. SANYO believes information herein is accurate and reliable, but no guarantees are made or implied regarding its use or any infringements of intellectual property rights or other rights of third parties. This catalog provides information as of June, 2005. Specifications and information herein are subject to change without notice. PS No.8350-3/3