Ordering number : ENN7029 SBS806M Schottky Barrier Diode SBS806M 30V, 0.5A Rectifier Applications Package Dimensions unit : mm 1310 • 2.1 3 2 1 0.65 5 2.0 4 1 : Anode (Diode 1) 2 : No Contact 3 : Anode (Diode 2) 4 : Cathode (Diode 2) 5 : Cathode (Diode 1) (Bottom view) 0.85 • 0.25 • 5 4 Low forward voltage (IF=0.3A, VF max=0.4V) (IF=0.5A, VF max=0.47V). Composite type with 2 low VF SBDs in one package, facilitating high-density mounting. The SBS806M is composed of 2 chips that are equivalent to the SBS006. Ultrasmall package facilitates miniaturization in end products. 0.15 0.3 0.07 Features • [SBS806M] 0.25 High frequency rectification (switching regulators, converters, choppers). 1.6 • 1 Specifications 2 3 (Top view) SANYO : MCPH5 Absolute Maximum Ratings at Ta=25°C(Value per element) Parameter Symbol Repetitive Peak Reverse Voltage Conditions Ratings Unit VRRM VRSM 30 V 30 V Average Output Current IO 0.5 A Surge Forward Current 10 A Junction Temperature IFSM Tj --55 to +125 °C Storage Temperature Tstg --55 to +125 °C Nonrepetitive Peak Reverse Surge Voltage 50Hz sine wave, 1 cycle Electrical Characteristics at Ta=25°C (Value per element) Parameter Reverse Voltage Forward Voltage Reverse Current Reverse Recovery Time Conditions VR VF1 IR=0.5mA IF=0.3A VF2 IF=0.5A VR=10V VR=10V, f=1MHz IR Interterminal Capacitance Thermal Resistance Symbol C trr Rchj-a Ratings min typ max 30 Unit V 0.35 0.40 0.42 0.47 V 200 µA 20 IF=IR=100mA, See specified Test Circuit. Mounted on a ceramic board (600mm2✕0.8mm) V pF 10 ns 110 °C / W Marking : SA Caution! Since this device is a low-VF SBD, the IR is large. It is inclined to break due to thermal runaway caused by reverse loss in case of severe conditions such as high temperature / voltage. Please make a safe design taking heat dissipation into consideration. Any and all SANYO products described or contained herein do not have specifications that can handle applications that require extremely high levels of reliability, such as life-support systems, aircraft's control systems, or other applications whose failure can be reasonably expected to result in serious physical and/or material damage. Consult with your SANYO representative nearest you before using any SANYO products described or contained herein in such applications. SANYO assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all SANYO products described or contained herein. SANYO Electric Co.,Ltd. Semiconductor Company TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN 73001 GI IM No.7029-1/3 SBS806M Electrical Connection Duty≤10% 1 : Anode 2 : No Contact 3 : Anode 4 : Cathode 5 : Cathode 1 2 10µs 50Ω 100Ω 10Ω (Top view) 3 10mA 100mA 4 100mA 5 trr Test Circuit --5V IF -- VF 10 Reverse Current, IR -- mA 1.0 °C 25 = Ta 0° C 3 2 °C 50 °C 10 °C 0.1 7 5 75 Forward Current, IF -- A 3 2 5 12 3 2 0 0.2 0.6 0.4 0.8 C 100°C 75°C 50°C 0.1 7 5 3 2 25°C 0 (1)Rectangular wave θ=60° (2)Rectangular wave θ=120° (3)Rectangular wave θ=180° (4)Sine wave θ=180° (1) (2) (4) Rectangular wave 0.15 θ 0.1 360° Sine wave 0.05 180° 360° 0.5 0 0.2 0.3 0.4 0.6 Average Forward Current, IO -- A 0.7 IT00634 IS -- t 12 20 25 30 IT00633 f=1MHz 7 (3) 0.2 0.1 15 C -- VR 100 0.25 0 10 Reverse Voltage, VR -- V PF(AV) -- IO 0.4 5 IT00632 Interterminal Capacitance, C -- pF Average Forward Power Dissipation, PF(AV) -- W 25° 1 Ta= 1.0 7 5 3 2 1.0 Forward Voltage, VF -- V 0.3 10 7 5 3 2 0.01 0.01 0.35 IR -- VR 100 7 5 3 2 7 5 7 5 trr 5 3 2 10 7 5 3 2 1.0 1.0 2 3 5 7 10 2 Reverse Voltage, VR -- V 3 5 7 100 IT00635 Surge Forward Current, IS(Peak) -- A Current waveform 50Hz sine wave IS 10 20ms t 8 6 4 2 0 7 0.01 2 3 5 7 0.1 2 Time, t -- s 3 5 7 1.0 2 3 IT00636 No.7029-2/3 SBS806M Specifications of any and all SANYO products described or contained herein stipulate the performance, characteristics, and functions of the described products in the independent state, and are not guarantees of the performance, characteristics, and functions of the described products as mounted in the customer's products or equipment. To verify symptoms and states that cannot be evaluated in an independent device, the customer should always evaluate and test devices mounted in the customer's products or equipment. SANYO Electric Co., Ltd. strives to supply high-quality high-reliability products. However, any and all semiconductor products fail with some probability. It is possible that these probabilistic failures could give rise to accidents or events that could endanger human lives, that could give rise to smoke or fire, or that could cause damage to other property. When designing equipment, adopt safety measures so that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective circuits and error prevention circuits for safe design, redundant design, and structural design. In the event that any or all SANYO products(including technical data,services) described or contained herein are controlled under any of applicable local export control laws and regulations, such products must not be expor ted without obtaining the expor t license from the authorities concerned in accordance with the above law. No part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or any information storage or retrieval system, or otherwise, without the prior written permission of SANYO Electric Co., Ltd. Any and all information described or contained herein are subject to change without notice due to product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification" for the SANYO product that you intend to use. Information (including circuit diagrams and circuit parameters) herein is for example only ; it is not guaranteed for volume production. SANYO believes information herein is accurate and reliable, but no guarantees are made or implied regarding its use or any infringements of intellectual property rights or other rights of third parties. This catalog provides information as of July, 2001. Specifications and information herein are subject to change without notice. PS No.7029-3/3