SCH2201 Ordering number : ENN8042 SCH2201 NPN Epitaxial Planar Silicon Transistor Switching, Driver Applications Applications • Low-frequency General-Purpose amplifier, high-speed switching, motor drivers, muting. Features • • Composite type with 2 NPN transistors contained in a single package, facilitating high-density mounting. Ultrasmall package permitting applied sets to be small and slim. Specifications Absolute Maximum Ratings at Ta=25°C Parameter Symbol Conditions Ratings Unit Collector-to-Base Voltage VCBO 20 Collector-to-Emitter Voltage VCEO 15 V Emitter-to-Base Voltage VEBO 5 V 0.8 A Collector Current IC ICP PC Collector Current (Pulse) Collector Dissipation Junction Temperature Tj Storage Temperature Tstg Mounted on a ceramic board (600mm2✕0.8mm) 1unit V 1.6 A 0.4 W 150 °C --55 to +150 °C Electrical Characteristics at Ta=25°C Parameter Symbol Collector Cutoff Current ICBO IEBO Emitter Cutoff Current DC Current Gain Gain-Bandwidth Product hFE fT Output Capacitance Cob Collector-to-Emitter Saturation Voltage Base-to-Emitter Saturation Voltage VCE(sat) Conditions Ratings min typ max VCB=12V, IE=0 VEB=4V, IC=0 VCE=2V, IC=50mA VCE=2V, IC=50mA VCB=10V, f=1MHz 300 Collector-to-Base Breakdown Voltage VBE(sat) V(BR)CBO Collector-to-Emitter Breakdown Voltage V(BR)CEO IC=10µA, IE=0 IC=1mA, RBE=∞ Emitter-to-Base Breakdown Voltage V(BR)EBO IE=10µA, IC=0 100 nA 100 nA 800 440 MHz 4 IC=400mA, IB=20mA IC=400mA, IB=20mA Unit pF 140 280 0.8 1.2 20 mV V V 15 V 5 V Marking : EE Continued on next page. Any and all SANYO products described or contained herein do not have specifications that can handle applications that require extremely high levels of reliability, such as life-support systems, aircraft's control systems, or other applications whose failure can be reasonably expected to result in serious physical and/or material damage. Consult with your SANYO representative nearest you before using any SANYO products described or contained herein in such applications. SANYO assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all SANYO products described or contained herein. SANYO Electric Co.,Ltd. Semiconductor Company TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN N3004EA TS IM TA-101000 No.8042-1/4 SCH2201 Continued from preceding page. Parameter Symbol Turm-ON Time ton tstg tf Storage Time Fall Time Ratings Conditions min typ See specified test circuit. 30 ns See specified test circuit. 165 ns See specified test circuit. 25 ns Package Dimensions unit : mm 2237 Electrical Connection 6 5 4 1 : Emitter1 2 : Base1 3 : Collector2 4 : Emitter2 5 : Base2 6 : Collector1 1 2 3 Top view 1.6 0.2 1.5 2 3 0.5 0.56 0.05 1.6 0.05 0.2 6 5 4 1 Unit max 0.25 1 : Emitter1 2 : Base1 3 : Collector2 4 : Emitter2 5 : Base2 6 : Collector1 SANYO : SCH6 Switching Time Test Circuit IB1 PW=20µs D.C.≤1% INPUT OUTPUT IB2 RB VR RL 50Ω + 220µF + 470µF VBE= --5V VCC=5V IC=20IB1= --20IB2=400mA IC -- VCE 700 VCE=2V 5.0mA 1000 3.0mA 600 2.0mA 1.5mA 500 400 1.0mA 300 0.6mA 200 800 600 Ta=7 5°C 25°C --25°C 800 mA .0 10 30.0 Collector Current, IC -- mA 900 IC -- VBE 1200 A 7.0m Collector Current, IC -- mA 20. 0m A mA 1000 400 200 0.3mA 100 0 0 IB=0 100 200 300 400 500 600 700 800 Collector-to-Emitter Voltage, VCE -- mV 900 0 1000 IT05037 0 0.2 0.4 0.6 0.8 Base-to-Emitter Voltage, VBE -- V 1.0 1.2 IT05038 No.8042-2/4 SCH2201 hFE -- IC 1000 Collector-to-Emitter Saturation Voltage, VCE(sat) -- mV DC Current Gain, hFE 25°C 5 IC / IB=20 7 Ta=75°C 7 VCE(sat) -- IC 1000 VCE=2V --25°C 3 2 5 3 2 100 C 5° =7 5°C a T --2 7 5 3 2 25 °C 10 7 5 100 1.0 2 3 5 7 10 3 2 5 7 100 2 3 Collector Current, IC -- mA 2 3 5 7 10 2 3 5 7 100 2 IC / IB=20 Base-to-Emitter Saturation Voltage, VBE(sat) -- V 5 3 2 100 7 C 5° 7 = Ta 5 3 C 5° --2 °C 25 2 10 1.0 2 3 5 7 10 2 3 5 7 100 2 3 1.0 Ta= --25°C 7 75°C 25°C 5 2 3 5 7 10 2 3 5 7 100 2 3 fT -- IC 1000 7 5 3 2 2 5 3 7 2 10 Collector-to-Base Voltage, VCB -- V 100 2 3 5 7 10 2 3 5 7 100 2 3 5 7 1000 IT05040 PC -- Ta OUT 1kΩ 3 2 500 IN 5 3 Collector Current, IC -- mA Collector Dissipation, PC -- mW 7 5 IT05041 1kΩ f=1MHz 7 7 1.0 3 Ron -- IB 10 ON-resistance, Ron -- Ω VCE=2V Gain-Bandwidth Product, fT -- MHz Output Capacitance, Cob -- pF f=1MHz 1.0 1.0 5 7 1000 IT05044 Collector Current, IC -- mA IT05043 Cob -- VCB 10 2 3 1.0 5 7 1000 Collector Current, IC -- mA 5 7 1000 IT05042 VBE(sat) -- IC 3 IC / IB=50 7 3 Collector Current, IC -- mA IT05039 VCE(sat) -- IC 1000 Collector-to-Emitter Saturation Voltage, VCE(sat) -- mV 3 1.0 5 7 1000 IB 2 1.0 7 5 3 2 M 400 ou nt ed on ac er 300 am ic bo ar d( 60 200 0m m2 ✕0 .8m 100 m )1 un it 0.1 0.1 0 2 3 5 7 1.0 2 Base Current, IB -- mA 3 5 7 10 IT06386 0 20 40 60 80 100 120 Ambient Temperature, Ta -- °C 140 160 IT06712 No.8042-3/4 SCH2201 Specifications of any and all SANYO products described or contained herein stipulate the performance, characteristics, and functions of the described products in the independent state, and are not guarantees of the performance, characteristics, and functions of the described products as mounted in the customer’s products or equipment. To verify symptoms and states that cannot be evaluated in an independent device, the customer should always evaluate and test devices mounted in the customer’s products or equipment. SANYO Electric Co., Ltd. strives to supply high-quality high-reliability products. However, any and all semiconductor products fail with some probability. It is possible that these probabilistic failures could give rise to accidents or events that could endanger human lives, that could give rise to smoke or fire, or that could cause damage to other property. When designing equipment, adopt safety measures so that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective circuits and error prevention circuits for safe design, redundant design, and structural design. In the event that any or all SANYO products(including technical data,services) described or contained herein are controlled under any of applicable local export control laws and regulations, such products must not be exported without obtaining the export license from the authorities concerned in accordance with the above law. No part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or any information storage or retrieval system, or otherwise, without the prior written permission of SANYO Electric Co., Ltd. Any and all information described or contained herein are subject to change without notice due to product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification" for the SANYO product that you intend to use. Information (including circuit diagrams and circuit parameters) herein is for example only ; it is not guaranteed for volume production. SANYO believes information herein is accurate and reliable, but no guarantees are made or implied regarding its use or any infringements of intellectual property rights or other rights of third parties. This catalog provides information as of November, 2004. Specifications and information herein are subject to change without notice. PS No.8042-4/4