D45H5 D45H8 \ D45H11 ® PNP SILICON POWER TRANSISTORS ■ ■ ■ STMicroelectronics PREFERRED SALESTYPES LOW COLLECTOR-EMITTER SATURATION VOLTAGE FAST SWITCHING SPEED APPLICATIONS GENERAL PURPOSE SWITCHING AND AMPLIFIER ■ 3 1 DESCRIPTION The D45H5, D45H8 and D45H11 are silicon Multi-Epitaxial Planar PNP transistors mounted in Jedec TO-220 plastic package. They are inteded for various switching and general purpose applications. D45H8, D45H11 are complementary with D44H8, D44H11. 2 TO-220 INTERNAL SCHEMATIC DIAGRAM ABSOLUTE MAXIMUM RATINGS Symbol Parameter V CEO Collector-Emitter Voltage (I B = 0) V EBO Emitter-Base Voltage (I C = 0) IC I CM IB Unit D45H5 D45H8 D45H11 -45 -60 -80 -5 V V Collector Current -10 A Collector Peak Current -20 A -5 A Base Current o P tot Total Dissipation at T c ≤ 25 C T stg Storage Temperature Tj Value Max. Operating Junction Temperature February 2003 50 W -65 to 150 o C 150 o C 1/5 D45H5/D45H8/D45H11 THERMAL DATA R thj-case Thermal Resistance Junction-case Max o 2.5 C/W ELECTRICAL CHARACTERISTICS (Tcase = 25 oC unless otherwise specified) Symbol Parameter Test Conditions I CBO Collector Cut-off Current (I E = 0) V CB = rated V CEO I EBO Emitter Cut-off Current (I C = 0) V EB = -5V V CEO(sus) ∗ Collector-Emitter Sustaining Voltage (I B = 0) I C = -100 mA for D45H5 for D45H8 for D45H11 Min. Typ. Max. Unit -10 µA -100 µA V V -45 -60 -80 V CE(sat) ∗ Collector-Emitter Saturation Voltage I C = -8 A I C = -8 A I B = -0.4 A I B = -0.8 A -1 -1 V V V BE(sat) ∗ Base-Emitter Saturation Voltage I C = -8 A I B = -0.8 A -1.5 V DC Current Gain I C = -2 A I C = -4 A V CE = -1 V V CE = -1 V h FE ∗ ∗ Pulsed: Pulse duration = 300 µs, duty cycle ≤ 2 % Safe Operating Area 2/5 Derating Curves 60 40 120 70 D45H5/D45H8/D45H11 DC Current Gain DC Current Gain Collector-Emitter Saturation Voltage Base-Emitter Saturation Voltage 3/5 D45H5/D45H8/D45H11 TO-220 MECHANICAL DATA DIM. mm MIN. TYP. inch MAX. MIN. TYP. MAX. A 4.40 4.60 0.173 0.181 C 1.23 1.32 0.048 0.052 D 2.40 2.72 0.094 0.107 E 0.49 0.70 0.019 0.027 F 0.61 0.88 0.024 0.034 F1 1.14 1.70 0.044 0.067 F2 1.14 1.70 0.044 0.067 G 4.95 5.15 0.194 0.202 G1 2.40 2.70 0.094 0.106 H2 10.00 10.40 0.394 L2 L4 16.40 13.00 0.409 0.645 14.00 0.511 0.551 0.116 L5 2.65 2.95 0.104 L6 15.25 15.75 0.600 0.620 L7 6.20 6.60 0.244 0.260 L9 3.50 3.93 0.137 0.154 3.85 0.147 M DIA. 2.60 3.75 0.102 0.151 P011CI 4/5 D45H5/D45H8/D45H11 Information furnished is believed to be accurate and reliable. However, STMicroelectronics assumes no responsibility for the consequences of use of such information nor for any infringement of patents or other rights of third parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of STMicroelectronics. Specification mentioned in this publication are subject to change without notice. This publication supersedes and replaces all information previously supplied. STMicroelectronics products are not authorized for use as critical components in life support devices or systems without express written approval of STMicroelectronics. The ST logo is a trademark of STMicroelectronics © 2003 STMicroelectronics – Printed in Italy – All Rights Reserved STMicroelectronics GROUP OF COMPANIES Australia - Brazil - Canada - China - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan - Malaysia - Malta - Morocco Singapore - Spain - Sweden - Switzerland - United Kingdom - United States. http://www.st.com 5/5