FLI30x02 Single-chip analog TV processor Data Brief Features ■ Advanced audio enhancement ■ Digital audio support ■ I2S, SPDIF input ■ I2S, SPDIF output ■ Loud speaker, sub woofer, and headphone ■ Analog line in, microphone in, and line out ■ Tuner noise reduction ■ Triple 10-bit ADC ■ 2D video decoder ■ HDMI Rx (in case of FLI30602H) ■ Programmable digital input port (8/16 bits in FLI30602H and 24 bits in FLI30502) ■ Faroudja DCDi Edge® image enhancement suite ■ ACM-3D Application ■ OSD controller ■ LCD TVs ■ Embedded microprocessor ■ Portable or handheld TVs ■ VBI slicer ■ Worldwide SIF audio demodulator ■ Audio processing September 2008 Rev 1 For further information contact your local STMicroelectronics sales office. 1/7 www.st.com 7 Description 1 FLI30x02 Description The FLI30x02 ICs are highly integrated solutions for LCD TV and Digital Audio Video applications. These solutions are capable of meeting global market requirements for: video and audio decoding and processing, Sound IF demodulation, and HDMI input support. It provides Faroudja DCDi Edge suite for advanced video and color processing. The chip incorporates a high-speed triple 10-bit ADC that can capture and process both video (SDTV or HDTV) and graphics streams. It has a highly programmable video front-end supporting multiple inputs and connection formats such as RGB, YPrPb, S-Video, CVBS, and SCART; multi-standard video decoder (NTSC, PAL, SECAM, and all sub formats); and global VBI standards and services support via VBI Slicer. The embedded microprocessor and OSD enable full system control without external devices. The chip supports worldwide TV audio standard demodulation (SIF) including digital audio (NICAM). It also supports analog line in, line outputs, loudspeaker, sub woofer, and headphones. The audio DSP supports high end audio processing and enhancement. In addition, I2S or SPDIF input and output ports with digital processing amplifier enable a full digital processing pipe for audio thereby supporting smaller area and power for constrained applications. HDMI integration is beneficial; it allows both video and audio processing including 5.1 CH to 2 CH audio conversions. The DCDi Edge suite of features, which include Adaptive Contrast and Color (ACC), ensure full dynamic video range support. The ACM 3D enables color manipulation for subtle changes in color to improve the image. The chip can also support DTV front-end with its digital video and audio input ports, thereby ensuring signal integrity due to full digital processing. Figure 1. System diagram FLI30x02 2/7 FLI30x02 2 Feature attributes Feature attributes ● ● Triple 10-bit ADC – RGB/YPbPr support up to 160 MHz – SCART–RGB + fast blank support – Flexible analog front-end Digital input port – ● ● ● ● ● Faroudja DCDi Edge enhancement – Eliminates objectionable staircasing – Faroudja horizontal enhancement module – Adaptive Contrast and Color (ACC) – Active Color Management—3D (ACM-3D) Embedded microprocessor – Turbo 186 core – Serial or parallel Flash support – 2-wire slave controller, UART support – Internal RESET controller – GPIOs, low bandwidth ADC—5-input – Infrared receiver interface Panel or digital output – 18 or 24-bit TTL output – Dual LVDS up to SXGA – Energy spectrum management for reducing EMI 2D video decoder – Worldwide NTSC/PAL/SECAM support – Macrovision™ and VCR trick mode support VBI slicer – ● ● ● 8/16/24-bit reconfigurable input port V-Chip, closed captioning, XDS, CGMS, and WSS decode – Teletext 1.5 support – 10 page (internal) support – Extended page support with external SRAM Scaling engine – Independent H and V scaling factors – Anamorphic (non-linear) scaling – 4:2:2 YPbPr or 4:4:4 RGB scaling OSD controller – Up to 4 windows: 1, 2, or 4 bits per pixel color – Programmable font scalar to meet teletext requirements Audio support – Two SIF inputs 3/7 Feature attributes ● 4/7 FLI30x02 – Global audio support—BTSC, A2, NICAM, EIAJ, etc. – Audio line in, microphone in, and line out support – Loudspeaker, sub woofer, and headphone support – Audio DSP – Audio enhancement features—pseudo stereo, 5-band graphic equalizer – I2S, SPDIF digital audio input and output support HDMI support (FLI30602H) – HDMI 1.2 compliant – Backward compatible with DVI 1.0 – Supports HDCP FLI30x02 3 Ordering information Ordering information Table 1. Order codes Part number Description FLI30502-AC 256 PQFP FLI30602H-AC 256 PQFP In order to meet environmental requirements, ST offers these devices in ECOPACK® packages. These packages have a lead-free second level interconnect. The category of second level interconnect is marked on the package and on the inner box label, in compliance with JEDEC Standard JESD97. The maximum ratings related to soldering conditions are also marked on the inner box label. ECOPACK is an ST trademark. ECOPACK specifications are available at www.st.com. 5/7 Revision history 4 FLI30x02 Revision history Table 2. 6/7 Revision history Date Revision 08-Sep-2008 1 Changes Initial release. FLI30x02 Please Read Carefully: Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries (“ST”) reserve the right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any time, without notice. All ST products are sold pursuant to ST’s terms and conditions of sale. Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no liability whatsoever relating to the choice, selection or use of the ST products and services described herein. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such third party products or services or any intellectual property contained therein. UNLESS OTHERWISE SET FORTH IN ST’S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. UNLESS EXPRESSLY APPROVED IN WRITING BY AN AUTHORIZED ST REPRESENTATIVE, ST PRODUCTS ARE NOT RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY, DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS "AUTOMOTIVE GRADE" MAY ONLY BE USED IN AUTOMOTIVE APPLICATIONS AT USER’S OWN RISK. Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any liability of ST. ST and the ST logo are trademarks or registered trademarks of ST in various countries. Information in this document supersedes and replaces all information previously supplied. The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners. © 2008 STMicroelectronics - All rights reserved STMicroelectronics group of companies Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan Malaysia - Malta - Morocco - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America www.st.com 7/7