FLI30336 Single-chip enhanced LCD TV controller Data Brief Features Applications ■ Integrated 3D video decoder ■ LCD and PDP TV ■ Flexible digital capture up to 165 MHz and analog capture up to 162 MHz ■ DLP®, LCD, and LCOS front and rear projection ■ VBI signal processing including WST version 2.5 support ■ Flexible DDR memory interface ■ Faroudja® TrueLife™ video enhancer ■ Advanced Picture-in-Picture (PIP) features ■ Advanced Color Management (ACM-3D) and Adaptive Contrast Control (ACC) ■ On-chip microprocessor ■ Advanced bitmapped OSD controller ■ LCD overdrive ■ Embedded 10-bit dual-channel LVDS for 1080p and WUXGA panel support ■ Package: 416 PBGA 2x24-bit or 1x30+1x16 bit input 10 bit Memory Controller 10-bit Triple ADC Digital Input Port DCDi Format Conversion for PIP Embedded Micro processor IR I/ F LBWADC Control Interface 6 channels November 2008 OSD Blend 10 bit LVDS Tx CLUTs 10-bit 3D Video Decoder and Triple ADC OSD Controller Picture Blend YPrPb/ RGB 2 TTX Decoder 3x3 Matrix YPrPb/ RGB 1 VBI Data Proc External Memory Output Formatter Dual Channel LVDS TTL RGB or YUV 3x3 Matrix b O s b O Sharpening Filters ACM 3D and ACC so Analog Front End t e l o MUX YC2 P e let YC1 r P e Enhancer d o r CV1 CV2 CV3 u d o ) (s t c u ) s ( ct Rev 1 For further information contact your local STMicroelectronics sales office. General Purpose I/O GPIO Audio Delay I2S in I2S out 1/7 www.st.com 7 Description 1 FLI30336 Description The FLI30336 offers high integration for advanced applications of Picture-in-Picture (PIP) and Picture-by-Picture (PBP) with an integrated video decoder and a 3D comb filter. The FLI30336 can power up to 1080p/WUXGA displays with the proven Faroudja DCDi Cinema branded technology. Special performance features such as the Faroudja DCDi Cinema video format converter, 10-bit performance in the device, and the Advanced Color Management (ACM-3D) provide exceptional video quality. This exclusive level of video quality technology only seen on Faroudja Home Theater Systems is now available in a single-chip solution. ) s ( ct The FLI30336 also comprises an integrated Analog Front-End (AFE) that includes triple ADCs and an integrated cross-point switch. The flexible AFE ensures simple PCB design with direct connections to TV tuners and input video connectors. In essence, the FLI30336 is the only device needed for a single LCD TV chassis supporting worldwide standards. For regional variations, only connector and firmware changes are required. u d o r P e The integrated VBI dataslicer and decoder remove the need for external components resulting in significant cost reduction. The FLI30336 supports many worldwide VBI standards for applications of Teletext, Closed Captioning, V-Chip, and other VBI services. t e l o The FLI30336 can be used in digital TV solutions requiring Faroudja DCDi Cinema video performance levels. An embedded microprocessor and a versatile OSD in a single device will facilitate rapid development of a reliable and attractive product. The FLI30336 utilizes the common Cortez family firmware for easy and effortless migration across different hardware platforms within this family. ) (s Figure 1. System diagram t e l o s b O t c u d o r P e RF DDR SDRAM TV Tuner Component Video SCART or Analog RGB Y/C RF s b O 16 configurable analog inputs FLI30336 Optional Second Analog Channel MPEG-2 Decoder Program Flash 2/7 LVDS Display up to WUXGA/ 1080p FLI30336 2 Feature attributes Feature attributes ● ● Flexible digital and analog capture Direct connection from tuner or connector to analog input pin – Supports analog RGB/YUV capture up to 162 MHz and digital input capture up to 165 MHz – Full SCART support including RGB fast blank – 4:4:4/4:2:2/CCIR656/601 8/16/24/30-bit digital input port – Simple connection to JPEG and MPEG processors with a 8-bit bi-directional media port ) s ( ct – Faroudja IntelliComb™ technology – 3D adaptive comb filters for luma–chroma separation – Supports Composite, S-Video, and Component (including High Definition) video input signals – Supports all broadcast TV video standards—NTSC (North America and Japan), PAL (I, B, G, H, M, D, N), SECAM (D, K, L, B, G) – Supports playback video standards—NTSC443 and PAL-60 – MacrovisionTM and VCR trick mode support u d o r P e t e l o ) (s s b O – Multi-standard digital VBI dataslicer – WST FastText page support access with > 2048 page cache – Supports WST level 2.5 – V-chip, VPS, Closed Captioning, XDS, CGMS, and WSS decoder – Supports VBI frame freeze t c u d o r Faroudja DCDI Cinema format conversion P e t e l o ● – VBI signal processing ● O 16 configurable analog inputs Integrated 3D video decoder ● bs – – Low angle de-interlacing processing – Per pixel Motion Adaptive De-interlacing (MADi) up to 1080i format – Format conversion up to WUXGA resolutions – Panoramic and anamorphic non-linear scaling – Adaptive media display processing for 3:2 and 2:2 video content – Special 2:2 and 3:3 film mode for improved film processing – Adaptive 3D/TNR noise reduction – Media noise reduction for MPEG inputs On-chip microprocessor – Integrated x186-based microprocessor with rich function library – General Purpose Inputs/Outputs (GPIOs) available for managing system devices (keypad, backlight, NVRAM, etc.) – Advanced power control for low power stand-by mode – 2-wire serial master bus interface for external device control 3/7 Feature attributes ● Faroudja TrueLife video enhancer ● 4/7 – Programmable main channel horizontal and vertical filter coefficients – Non-linear chroma and luma enhancement – Removal of the DVD Chroma Upsampling Error (CUE) introduced by some DVD sources – ACM-3D allows flexible flesh-tone compensation, blue stretch, and other image enhancements – ACM-3D provides flexible programming, polar coordinate representation, and sixaxis color control – ACC ensures full dynamic range is used in video content ) s ( ct u d o – Programmable PIP channel horizontal and vertical filter coefficients – Supports high performance programmable sharpening filters with noise coring – Video PIP over full screen graphics and video backgrounds – Supports graphics and video PIP (CVBS/S-Video/Component ED/HD) over full screen video background (CVBS/S-Video) – Side-by-side window support r P e t e l o s b O – PIP zoom support – DCDi Edge® processing for second channel window Output formats ) (s – Dual-channel 8-bit wide TTL output – Dual-channel 10-bit LVDS transmitters for direct connection to LCD modules – 30-bit single-wide TTL output; 24-bit 4:2:2 YUV TTL output—12 bits per color 1080p panel support – 120 Hz WXGA panel support using FRC and Black Frame Insertion (BFI) technique t c u d o r P e t e l o O High performance and programmable sharpening filters with noise coring Picture-in-Picture (PIP) ● bs – Advanced Color Management (ACM-3D) ● ● FLI30336 Other features – Integrated infrared decoder – Integrated low bandwidth ADC with 6 input channels – 4 integrated PWM outputs for LCD backlight control – Integrated I2S audio delay to exact audio and video synchronization – I2S channel MUX to support two I2S input streams – Supports DDR1-500 memory devices and 512 Mb – Reduce LCD video smearing artifacts – Advanced bitmapped OSD controller FLI30336 3 Ordering information Ordering information Table 1. Order codes Part number FLI30336-AC Description 416-ball PBGA In order to meet environmental requirements, ST offers this device in ECOPACK® packages. These packages have a lead-free second level interconnect. The category of second level interconnect is marked on the package and on the inner box label, in compliance with JEDEC Standard JESD97. The maximum ratings related to soldering conditions are also marked on the inner box label. ECOPACK is an ST trademark. ECOPACK specifications are available at www.st.com. ) s ( ct u d o r P e t e l o ) (s s b O t c u d o r P e t e l o s b O 5/7 Revision history 4 FLI30336 Revision history Table 2. Document revision history Date Revision 03-Nov-2008 1 Changes Initial release. ) s ( ct u d o r P e t e l o ) (s t c u d o r P e t e l o s b O 6/7 s b O FLI30336 ) s ( ct Please Read Carefully: u d o Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries (“ST”) reserve the right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any time, without notice. r P e All ST products are sold pursuant to ST’s terms and conditions of sale. Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no liability whatsoever relating to the choice, selection or use of the ST products and services described herein. t e l o No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such third party products or services or any intellectual property contained therein. ) (s s b O UNLESS OTHERWISE SET FORTH IN ST’S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. t c u UNLESS EXPRESSLY APPROVED IN WRITING BY AN AUTHORIZED ST REPRESENTATIVE, ST PRODUCTS ARE NOT RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY, DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS "AUTOMOTIVE GRADE" MAY ONLY BE USED IN AUTOMOTIVE APPLICATIONS AT USER’S OWN RISK. d o r P e t e l o Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any liability of ST. s b O ST and the ST logo are trademarks or registered trademarks of ST in various countries. Information in this document supersedes and replaces all information previously supplied. The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners. © 2008 STMicroelectronics - All rights reserved STMicroelectronics group of companies Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan Malaysia - Malta - Morocco - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America www.st.com 7/7