STD11NM60N-1 - STB11NM60N/-1 STD11NM60N-STP11NM60N-STF11NM60N N-channel 600 V - 0.37 Ω - 10 A - TO-220 - TO-220FP- I2PAK - IPAK DPAK - D2PAK second generation MDmesh™ Power MOSFET Features Type VDSS (@TJmax) RDS(on) max ID 650 V 650 V 650 V 650 V 650 V 650 V 0.45 Ω 0.45 Ω 0.45 Ω 0.45 Ω 0.45 Ω 0.45 Ω 10 A 10 A 10 A 10 A 10 A(1) 10 A STB11NM60N-1 STB11NM60N STD11NM60N STD11NM60N-1 STF11NM60N STP11NM60N 1 3 12 I²PAK 100% avalanche tested ■ Low input capacitance and gate charge ■ Low gate input resistance Figure 1. 2 1 1 DPAK TO-220 1. Limited only by maximum temperature allowed ■ 3 3 3 2 IPAK 3 3 1 D²PAK 1 2 TO-220FP Internal schematic diagram Application ■ Switching applications Description This series of devices is designed using the second generation of MDmesh™ technology. This revolutionary Power MOSFET associates a new vertical structure to the company’s strip layout to yield one of the world’s lowest on-resistance and gate charge. It is therefore suitable for the most demanding high efficiency converters. Table 1. Device summary Order codes Marking Package Packaging STB11NM60N-1 B11NM60N I²PAK Tube STB11NM60N 11NM60N D²PAK Tape and reel STD11NM60N-1 D11NM60N IPAK Tube STD11NM60N D11NM60N DPAK Tape and reel STP11NM60N P11NM60N TO-220 Tube STF11NM60N F11NM60N TO-220FP Tube March 2008 Rev 4 1/21 www.st.com 21 Contents STD11NM60N/-1 - STB11NM60N/-1 - STF11NM60N - STP11NM60N Contents 1 Electrical ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 2 Electrical characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 2.1 Electrical characteristics (curves) ............................ 6 3 Test circuits 4 Package mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 5 Packaging mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 6 Revision history . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19 2/21 .............................................. 9 STD11NM60N/-1 - STB11NM60N/-1 - STF11NM60N - STP11NM60N 1 Electrical ratings Electrical ratings Table 2. Absolute maximum ratings Value Symbol Parameter TO-220/I²PAK D/D²PAK/IPAK Unit TO-220FP VDS Drain-source voltage (VGS = 0) 600 V VGS Gate-source voltage ± 25 V ID Drain current (continuous) at TC = 25 °C 10 10(1) A ID Drain current (continuous) at TC = 100 °C 6.3 6.3 (1) A IDM (2) Drain current (pulsed) 40 40(1) A PTOT Total dissipation at TC = 25 °C 90 25 W Derating factor 0.8 0.2 W/°C dv/dt (3) Peak diode recovery voltage slope 15 VISO Insulation withstand voltage (RMS) from all three leads to external heat sink (t = 1 s;TC = 25 °C) Tstg Storage temperature TJ -- Max. operating junction temperature V/ns 2500 V -55 to 150 °C 150 °C 1. Limited only by maximum temperature allowed 2. Pulse width limited by safe operating area 3. ISD ≤10 A, di/dt ≤400 A/µs, VDD = 80% V(BR)DSS Table 3. Thermal data Value Symbol Parameter Unit TO-220 I²PAK DPAK D²PAK IPAK TO-220FP Rthj-case Thermal resistance junction-case max Rthj-amb Thermal resistance junction-amb max Rthj-pcb Thermal resistance junction-pcb max Tl Maximum lead temperature for soldering purposes 1.38 62.5 -- -- 5 °C/W -- -- 100 62.5 °C/W 50 30 -- -- °C/W 300 °C 3/21 Electrical ratings Table 4. Symbol 4/21 STD11NM60N/-1 - STB11NM60N/-1 - STF11NM60N - STP11NM60N Avalanche characteristics Parameter Max value Unit IAS Avalanche current, repetitive or not-repetitive (pulse width limited by TJ max) 3.5 A EAS Single pulse avalanche energy (starting TJ = 25 °C, ID = IAS, VDD = 50 V) 200 mJ STD11NM60N/-1 - STB11NM60N/-1 - STF11NM60N - STP11NM60N 2 Electrical characteristics Electrical characteristics (TCASE=25°C unless otherwise specified) Table 5. Symbol V(BR)DSS dv/dt(1) 1. Parameter Drain-source breakdown voltage Drain-source voltage slope Test conditions ID = 1 mA, VGS= 0 Min. Typ. VDS = Max rating, IGSS Gate body leakage current (VDS = 0) VGS = ±20 V VGS(th) Gate threshold voltage VDS= VGS, ID = 250 µA RDS(on) Static drain-source on resistance VGS= 10 V, ID= 5 A Unit V 45 VGS =10 V Zero gate voltage drain current (VGS = 0) Max. 600 VDD = 400 V,ID = 5 A, IDSS 1 10 µA µA ±100 nA 3 4 V 0.37 0.45 Ω Typ. Max. Unit VDS=Max rating,Tc=125 °C 2 V/ns Characteristic value at turn off on inductive load Table 6. Symbol Dynamic Parameter Test conditions Min. gfs(1) Forward transconductance VDS =15 V, ID= 5 A 7.5 S Ciss Coss Crss Input capacitance Output capacitance Reverse transfer capacitance VDS =50 V, f=1 MHz, VGS=0 850 44 5 pF pF pF Equivalent output capacitance VGS=0, VDS =0 to 480 V 130 pF Rg Gate input resistance f=1 MHz Gate DC Bias=0 Test signal level=20 mV open drain 3.7 Ω Qg Qgs Qgd Total gate charge Gate-source charge Gate-drain charge 31 4.2 15.9 nC nC nC Coss eq.(2) 1. On/off states VDD=480 V, ID = 10 A VGS =10 V (see Figure 19) Pulsed: pulse duration = 300µs, duty cycle 1.5% 2. Coss eq. is defined as a constant equivalent capacitance giving the same charging time as Coss when VDS increases from 0 to 80% VDSS 5/21 Electrical characteristics Table 7. Symbol td(on) tr td(off) tf Table 8. Symbol ISD ISDM VSD(1) trr Qrr IRRM trr Qrr IRRM 1. 6/21 STD11NM60N/-1 - STB11NM60N/-1 - STF11NM60N - STP11NM60N Switching times Parameter Turn-on delay time Rise time Turn-off delay time Fall time Test conditions Min. VDD = 300 V, ID = 5 A, Typ. Max. Unit 22 18.5 50 12 RG = 4.7 Ω, VGS = 10 V (see Figure 18) (see Figure 23) ns ns ns ns Source drain diode Parameter Test conditions Min. Typ. Max. Unit Source-drain current Source-drain current (pulsed) 10 40 A A 1.3 V Forward on voltage ISD = 10 A, VGS=0 Reverse recovery time Reverse recovery charge Reverse recovery current ISD =10 A, di/dt =100 A/µs, VDD =100 V (see Figure 20) 340 3.26 19.2 ns µC A Reverse recovery time Reverse recovery charge Reverse recovery current VDD =100 V di/dt =100 A/µs, ISD = 10 A TJ = 150 °C (see Figure 20) 460 4.42 19.2 ns µC A Pulsed: pulse duration = 300µs, duty cycle 1.5% STD11NM60N/-1 - STB11NM60N/-1 - STF11NM60N - STP11NM60N Electrical characteristics 2.1 Electrical characteristics (curves) Figure 2. Safe operating area for TO-220 / I²PAK / D²PAK Figure 3. Thermal impedance for TO-220 / I²PAK / D²PAK Figure 4. Safe operating area for TO-220FP Figure 5. Thermal impedance for TO-220FP Figure 6. Safe operating area for DPAK / IPAK Figure 7. Thermal impedance for DPAK / IPAK 7/21 Electrical characteristics Figure 8. STD11NM60N/-1 - STB11NM60N/-1 - STF11NM60N - STP11NM60N Output characteristics Figure 10. Transconductance Figure 9. Transfer characteristics Figure 11. Static drain-source on resistance Figure 12. Gate charge vs gate-source voltage Figure 13. Capacitance variations 8/21 STD11NM60N/-1 - STB11NM60N/-1 - STF11NM60N - STP11NM60N Electrical characteristics Figure 14. Normalized gate threshold voltage vs temperature Figure 15. Normalized on resistance vs temperature Figure 16. Source-drain diode forward characteristics Figure 17. Normalized BVDSS vs temperature 9/21 Test circuits 3 STD11NM60N/-1 - STB11NM60N/-1 - STF11NM60N - STP11NM60N Test circuits Figure 18. Switching times test circuit for resistive load Figure 19. Gate charge test circuit Figure 20. Test circuit for inductive load Figure 21. Unclamped inductive load test switching and diode recovery times circuit Figure 22. Unclamped inductive waveform 10/21 Figure 23. Switching time waveform STD11NM60N/-1 - STB11NM60N/-1 - STF11NM60N - STP11NM60N 4 Package mechanical data Package mechanical data In order to meet environmental requirements, ST offers these devices in ECOPACK® packages. These packages have a Lead-free second level interconnect. The category of second level interconnect is marked on the package and on the inner box label, in compliance with JEDEC Standard JESD97. The maximum ratings related to soldering conditions are also marked on the inner box label. ECOPACK is an ST trademark. ECOPACK specifications are available at: www.st.com 11/21 Package mechanical data STD11NM60N/-1 - STB11NM60N/-1 - STF11NM60N - STP11NM60N TO-220 mechanical data mm inch Dim Min A b b1 c D D1 E e e1 F H1 J1 L L1 L20 L30 ∅P Q 12/21 Typ 4.40 0.61 1.14 0.48 15.25 Max Min 4.60 0.88 1.70 0.70 15.75 0.173 0.024 0.044 0.019 0.6 10.40 2.70 5.15 1.32 6.60 2.72 14 3.93 0.393 0.094 0.194 0.048 0.244 0.094 0.511 0.137 1.27 10 2.40 4.95 1.23 6.20 2.40 13 3.50 Max 0.181 0.034 0.066 0.027 0.62 0.050 16.40 28.90 3.75 2.65 Typ 0.409 0.106 0.202 0.051 0.256 0.107 0.551 0.154 0.645 1.137 3.85 2.95 0.147 0.104 0.151 0.116 STD11NM60N/-1 - STB11NM60N/-1 - STF11NM60N - STP11NM60N Package mechanical data TO-220FP mechanical data mm. Dim. Min. A 4.40 inch Typ Max. Min. 4.60 0.173 Typ. 0.181 Max. B 2.5 2.7 0.098 0.106 D 2.5 2.75 0.098 0.108 E 0.45 0.70 0.017 0.027 F 0.75 1.00 0.030 0.039 F1 1.15 1.50 0.045 0.067 F2 1.15 1.50 0.045 0.067 G 4.95 5.20 0.195 0.204 G1 2.40 2.70 0.094 0.106 H 10 10.40 0.393 L2 16 0.409 0.630 28.6 30.6 1.126 L4 9.80 10.60 0.385 1.204 0.417 L5 2.9 3.6 0.114 0.141 L6 15.90 16.40 0.626 0.645 L7 9 9.30 0.354 0.366 Dia 3 3.2 0.118 0.126 B D A E L3 L3 L6 F2 H G G1 Dia F F1 L7 L2 L5 1 2 3 L4 7012510-I 13/21 Package mechanical data STD11NM60N/-1 - STB11NM60N/-1 - STF11NM60N - STP11NM60N D²PAK (TO-263) mechanical data mm inch Dim Min A A1 b b2 c c2 D D1 E E1 e e1 H J1 L L1 L2 R V2 Max Min 4.60 0.23 0.93 1.70 0.60 1.36 9.35 0.173 0.001 0.027 0.045 0.017 0.048 0.352 0.295 0.394 0.334 10.40 2.54 4.88 15 2.49 2.29 1.27 1.30 Typ Max 0.181 0.009 0.037 0.067 0.024 0.053 0.368 0.409 0.1 5.28 15.85 2.69 2.79 1.40 1.75 0.192 0.590 0.099 0.090 0.05 0.051 8° 0° 0.4 0° 0079457_M 14/21 Typ 4.40 0.03 0.70 1.14 0.45 1.23 8.95 7.50 10 8.50 0.208 0.624 0.106 0.110 0.055 0.069 0.016 8° STD11NM60N/-1 - STB11NM60N/-1 - STF11NM60N - STP11NM60N Package mechanical data I²PAK (TO-262) mechanical data mm inch Dim Min A A1 b b1 c c2 D e e1 E L L1 L2 4.40 2.40 0.61 1.14 0.49 1.23 8.95 2.40 4.95 10 13 3.50 1.27 Typ Max Min 4.60 2.72 0.88 1.70 0.70 1.32 9.35 2.70 5.15 10.40 14 3.93 1.40 0.173 0.094 0.024 0.044 0.019 0.048 0.352 0.094 0.194 0.393 0.511 0.137 0.050 Typ Max 0.181 0.107 0.034 0.066 0.027 0.052 0.368 0.106 0.202 0.410 0.551 0.154 0.055 15/21 Package mechanical data STD11NM60N/-1 - STB11NM60N/-1 - STF11NM60N - STP11NM60N TO-252 (DPAK) mechanical data DIM. mm. min. typ max. A 2.20 A1 0.90 2.40 1.10 A2 0.03 0.23 b 0.64 0.90 b4 5.20 5.40 c 0.45 0.60 c2 0.48 0.60 D 6.00 D1 E 6.20 5.10 6.40 E1 6.60 4.70 e 2.28 e1 4.40 4.60 H 9.35 10.10 L 1 L1 2.80 L2 L4 0.80 0.60 R V2 1 0.20 0o 8o 0068772_G 16/21 STD11NM60N/-1 - STB11NM60N/-1 - STF11NM60N - STP11NM60N Package mechanical data TO-251 (IPAK) mechanical data mm. DIM. min. typ max. A 2.20 2.40 A1 0.90 1.10 b 0.64 0.90 5.20 5.40 b2 b4 0.95 c 0.45 0.60 c2 0.48 0.60 D 6.00 6.20 E 6.40 6.60 e e1 2.28 4.40 H 4.60 16.10 L 9.00 (L1) 0.80 9.40 1.20 L2 0.80 V1 10 o 0068771_H 17/21 Packaging mechanical data 5 STD11NM60N/-1 - STB11NM60N/-1 - STF11NM60N - STP11NM60N Packaging mechanical data DPAK FOOTPRINT All dimensions are in millimeters TAPE AND REEL SHIPMENT REEL MECHANICAL DATA DIM. mm MIN. A B 1.5 C 12.8 D 20.2 G 16.4 N 50 T TAPE MECHANICAL DATA DIM. mm MIN. MAX. A0 6.8 7 0.267 0.275 B0 10.4 10.6 0.409 0.417 B1 D 18/21 inch 1.5 D1 1.5 E 1.65 MIN. MAX. 12.1 0.476 1.6 0.059 0.063 1.85 0.065 0.073 0.059 F 7.4 7.6 0.291 0.299 K0 2.55 2.75 0.100 0.108 0.153 0.161 P0 3.9 4.1 P1 7.9 8.1 0.311 0.319 P2 1.9 2.1 0.075 0.082 R 40 W 15.7 1.574 16.3 0.618 0.641 inch MAX. MIN. MAX. 330 12.992 13.2 0.504 0.520 18.4 0.645 0.724 0.059 0.795 1.968 22.4 0.881 BASE QTY BULK QTY 2500 2500 STD11NM60N/-1 - STB11NM60N/-1 - STF11NM60N - STP11NM60N Packaging mechanical data D2PAK FOOTPRINT TAPE AND REEL SHIPMENT REEL MECHANICAL DATA DIM. mm MIN. A B 1.5 C 12.8 D 20.2 G 24.4 N 100 T TAPE MECHANICAL DATA DIM. mm inch MIN. MAX. MIN. A0 10.5 10.7 0.413 0.421 B0 15.7 15.9 0.618 0.626 D 1.5 1.6 0.059 0.063 D1 1.59 1.61 0.062 0.063 E 1.65 1.85 0.065 0.073 F 11.4 11.6 0.449 0.456 inch MAX. MIN. MAX. 330 12.992 13.2 0.504 0.520 26.4 0.960 1.039 0.059 0795 3.937 30.4 1.197 BASE QTY BULK QTY 1000 1000 MAX. K0 4.8 5.0 0.189 0.197 P0 3.9 4.1 0.153 0.161 P1 11.9 12.1 0.468 0.476 P2 1.9 2.1 0.075 0.082 R 50 1.574 T 0.25 0.35 0.0098 0.0137 W 23.7 24.3 0.933 0.956 * on sales type 19/21 Revision history 6 STD11NM60N/-1 - STB11NM60N/-1 - STF11NM60N - STP11NM60N Revision history Table 9. 20/21 Document revision history Date Revision Changes 03-Aug-2006 1 First release 14-Nov-2006 2 Complete version 02-Oct-2007 3 Figure 8.: Output characteristics has been updated. Added new package (I²PAK) 03-Mar-2008 4 Added new package D²PAK STD11NM60N/-1 - STB11NM60N/-1 - STF11NM60N - STP11NM60N Please Read Carefully: Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries (“ST”) reserve the right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any time, without notice. All ST products are sold pursuant to ST’s terms and conditions of sale. Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no liability whatsoever relating to the choice, selection or use of the ST products and services described herein. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such third party products or services or any intellectual property contained therein. UNLESS OTHERWISE SET FORTH IN ST’S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. UNLESS EXPRESSLY APPROVED IN WRITING BY AN AUTHORIZED ST REPRESENTATIVE, ST PRODUCTS ARE NOT RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY, DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS "AUTOMOTIVE GRADE" MAY ONLY BE USED IN AUTOMOTIVE APPLICATIONS AT USER’S OWN RISK. Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any liability of ST. ST and the ST logo are trademarks or registered trademarks of ST in various countries. Information in this document supersedes and replaces all information previously supplied. The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners. © 2008 STMicroelectronics - All rights reserved STMicroelectronics group of companies Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan Malaysia - Malta - Morocco - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America www.st.com 21/21