STDD15-07P6 ® LOW CAPACITANCE DETECTION DIODE PRELIMINARY DATASHEET MAIN PRODUCT CHARACTERISTICS IF(AV) 10 mA VRRM 15 V Tj (max) 150 °C VF (max) 0.51 V SOT-666 FEATURES AND BENEFITS ■ ■ ■ ■ ■ Low diode capacitance Device designed for RF application Low profile package 40% space saving versus SOT-323 Very low parasitic inductor & resistor SCHEMATIC DIAGRAM DESCRIPTION The STDD15-07P6 is a dual diode series for the detection of a RF signal and the compensation of the voltage drift with the temperature. The SOT-666 package makes the device ideal in application where the space saving is critical like mobile phones. The low junction capacitance will reduce the disturbance on the RF signal. 1 6 2 5 3 4 Parallel configuration STDD15-07P6 ABSOLUTE RATINGS (limiting values) Symbol VRRM IF Parameter Value Unit Repetitive peak reverse voltage 15 V Continuous forward current 10 mA 2 A - 65 + 150 °C 150 °C IFSM Surge non repetitive forward current Tstg Storage temperature range Tj Half wave, single phase, 60Hz Maximum operating junction temperature November 2003 - Ed: 1A 1/3 STDD15-07P6 THERMAL PARAMETERS Symbol Rth (j-a)* Parameter Junction to ambient Value Unit 400 °C/W *: Mounted with minimum recommended pad size, PC board FR4. STATIC ELECTRICAL CHARACTERISTICS Symbol IR* Parameter Reverse leakage current Tests conditions Tj = 25°C Min. VR = 1V Tj = 125°C Tj = 25°C 6 VR = 15V Forward voltage drop Tj = 25°C IF = 1 mA Tj = 125°C Tj = 25°C Max. Unit 0.035 µA 30 0.23 Tj = 125°C V F* Typ. IF = 10 mA Tj = 125°C 20 100 350 380 230 260 500 570 460 510 µA mV * Pulse test: tp ≤ 250µs, δ ≤ 2% ELECTRICAL CHARACTERISTICS Symbol 2/3 Parameter Tests conditions CT Diode capacitance VR = 0 V F = 1MHz RF Forward resistance IF = 5 mA F = 100MHz Ls Series inductance Min. Typ. Max. Unit 1.0 pF 15 Ω 1.5 nH STDD15-07P6 PACKAGE MECHANICAL DATA SOT-666 DIMENSIONS REF. bp e1 Millimeters Inches Min. Max. Min. Max. A 0.50 0.60 0.020 0.024 bp 0.17 0.27 0.007 0.011 c 0.08 0.18 0.003 0.007 D 1.50 1.70 0.060 0.067 E 1.10 1.30 0.043 0.051 e D E A Lp U e 1.00 0.040 e1 0.50 0.020 He He 1.50 1.70 0.059 0.067 FOOTPRINT DIMENSIONS (in millimeters) 0.5 0.43 2.75 1.16 Note: The device fulfills the MSL level 1 after leadfree soldering profile. 0.3 Ordering code Marking Package Weight Base qty Delivery mode STDD15-07P6 .5 SOT-666 2.9 mg 3000 Tape & reel Information furnished is believed to be accurate and reliable. However, STMicroelectronics assumes no responsibility for the consequences of use of such information nor for any infringement of patents or other rights of third parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of STMicroelectronics. Specifications mentioned in this publication are subject to change without notice. This publication supersedes and replaces all information previously supplied. STMicroelectronics products are not authorized for use as critical components in life support devices or systems without express written approval of STMicroelectronics. The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners. © 2003 STMicroelectronics - All rights reserved. STMicroelectronics GROUP OF COMPANIES Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany Hong Kong - India - Israel - Italy - Japan - Malaysia - Malta - Morocco - Singapore - Spain Sweden - Switzerland - United Kingdom - United States www.st.com 3/3