STMICROELECTRONICS STV0362

STV0362
Low-power and ultra compact DVB-T single chip receiver
DVB-H broadcast compliant
Data Brief
Feature summary
Description
■
NorDig Unified specification (v1.0.2) capable
■
Channel reception quality indicator
■
Out-of-guard interval echoes superior
performances
■
Impulsive noise rejection capable
■
Outstanding adjacent and co-channel rejection
capability with integrated on-chip digital
channel filters
The STV0362 inherits the functionality of the
STV0361 device and embeds new functionalities
required by the DVB-H standard at the physical
layer side. The STV0362 features the full DVB-T
and DVB-H standards framing structure, channel
coding and modulation. The symbol, timing and
carrier recovery loops are fully digital and sized in
order to match the state-of-the-art RF downconverter devices.
■
Digital carrier, timing and symbol recovery
loops
■
2 K, 4 K, 8 K FFT length
■
6, 7 and 8 MHz channels bandwidth
■
1/4, 1/8, 1/16, 1/32 guard interval length
■
QPSK - 16 QAM - 64 QAM modulations
■
Hierarchical capability
■
TPS decoding
■
Viterbi soft decoder rate 1/2
■
Puncture rates are 1/2, 2/3, 3/4, 5/6, 7/8
■
Low power advanced CMOS process (90 nm)
■
Power consumption: <250 mW (typ) in
operation
■
Multi-supply: 1.0 V core, 2.5 V analog, 3.3 V
digital
■
TQFP64 7 x 7 x 1.0 mm.
The STV0362 is compatible with direct
conversion silicon tuners and is featuring two
high-performance differential 12-bit ADC for I and
Q channels. The tuner baseband power is
controlled by a classic AGC loop, and the RF
level is monitored by a dedicated single-ended 8bit ADC.
The terrestrial DVB-T network can be subject to
several interference sources which are the
neighboring digital and analog channels, as well
as the in-band analog channels. The STV0362
cancels these interference sources and removes
the effects of impulse noise. The channel
equalization is capable of static and dynamic
echo canceling even in severe urban
environments.
The embedded high-performance algorithms are
enhanced to cope with out-of-guard interval
echoes; specific channel quality monitoring is
available for acquisition and survey.
Order codes
Part number
STV0362
The specific power handling constraints are
primarily addressed by both technology and clock
rate management. The efficiency of channel
acquisition and re-acquisition also minimizes
power consumption.
Package
TQFP64 (7 x 7 x 1 mm)
The STV0362 relies on the decoder multimedia
processor to manage the MPE-FEC and to
control time slicing while operating in DVB-H
mode.
March 2006
Rev 1
For further information contact your local STMicroelectronics sales office.
1/3
www.st.com
3
STV0362
STV0362 application diagram
Revision history
Table 1.
2/3
Document revision history
Date
Revision
10-March-2006
1
Description of changes
First release
STV0362
Please Read Carefully:
Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries (“ST”) reserve the
right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any
time, without notice.
All ST products are sold pursuant to ST’s terms and conditions of sale.
Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no
liability whatsoever relating to the choice, selection or use of the ST products and services described herein.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this
document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products
or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such
third party products or services or any intellectual property contained therein.
UNLESS OTHERWISE SET FORTH IN ST’S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED
WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED
WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS
OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT.
UNLESS EXPRESSLY APPROVED IN WRITING BY AN AUTHORIZE REPRESENTATIVE OF ST, ST PRODUCTS ARE NOT DESIGNED,
AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING APPLICATIONS,
NOR IN PRODUCTS OR SYSTEMS, WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY, DEATH, OR
SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE.
Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void
any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any
liability of ST.
ST and the ST logo are trademarks or registered trademarks of ST in various countries.
Information in this document supersedes and replaces all information previously supplied.
The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners.
© 2006 STMicroelectronics - All rights reserved
STMicroelectronics group of companies
Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan Malaysia - Malta - Morocco - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America
www.st.com
3/3