STMICROELECTRONICS VN808-E

VN808-E
Octal channel high side driver
Features
Type
RDS(on)
Iout
VCC
VN808-E
150mΩ
0.7A
45V
■
VCC/2 compatible input
■
Junction over-temperature protection
■
Case over-temperature protection for thermal
independence of the channels
■
Current limitation
■
Shorted load protection
■
Undervoltage shudown
■
Protection against loss of ground
■
Very low stand-by current
■
Compliance to 61000-4-4 IEC test up to 4KV
Description
The VN808-E is a monolithic device designed in
STMicroelectronics VIPower M0-3 technology,
intended for driving any kind of load with one side
connected to ground.
Figure 1.
March 2007
PowerSO-36
Active current limitation combined with thermal
shutdown and automatic restart, protect the
device against overload. In overload condition,
channel turns OFF and back ON automatically so
as to maintain junction temperature between TTSD
and TR. If this condition makes case temperature
reach TCSD, overloaded channel is turned OFF
and and will restart only when case temperature
has decreased down to TCR( see waveform 3
Figure 8 on page 11). Non overloaded channels
continue to operate normally. Device
automatically turns OFF in case of ground pin
disconnection. This device is especially suitable
for industrial applications conform to IEC 61131
Block diagram
Rev 4
1/17
www.st.com
17
Contents
VN808-E
Contents
1
Maximum ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
2
Electrical characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
3
Pin connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
4
Current, voltage conventions and internal diagram . . . . . . . . . . . . . . . 8
5
Switching time waveforms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
6
Mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
7
Order code . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
8
Revision history . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
2/17
VN808-E
1
Maximum ratings
Maximum ratings
Table 1.
Absolute maximum rating
Symbol
Parameter
VCC
DC supply voltage
-IGND
DC ground pin reverse current
TRAN Ground pin reverse current
( pulse duration < 1ms)
IOUT
DC output current
-IOUT
Reverse DC output current
IIN
DC Input current
VIN
Input voltage range
Value
Unit
45
V
-250
-6
mA
A
Internally limited
A
-2
A
± 10
mA
-3/+VCC
V
2000
V
VESD
Electrostatic discharge (R = 1.5KΩ; C = 100pF)
PTOT
Power dissipation at Tc = 25°C
96
W
LMAX
Max inductive load ( VCC = 24V, RLOAD = 48Ω,
TA = 100°C)
2
H
TJ
Junction operating temperature
Internally limited
°C
TC
Case operating temperature
Internally limited
°C
-40 to 150
°C
Value
Unit
Max
1.3
°C/W
Max
50
°C/W
TSTG
Table 2.
Symbol
RthJC
RthJA
Storage Temperature
Thermal data
Parameter
Thermal resistance junction-case
Thermal resistance junction-ambient
(1)
1. When mounted on FR4 printed circuit board with 0.5cm2 of copper area ( at least 35µm think ) connected to
all TAB pins.
3/17
Electrical characteristics
2
VN808-E
Electrical characteristics
(10.5V < VCC < 32V; -40°C < TJ < 125°C; unless otherwise specified)
Table 3.
Symbol
Parameter
Test conditions
VCC
Operating supply
voltage
VUSD
Undervoltage
shutdown
RON
On state resistance
IOUT = 0.5A; TJ = 25°C
IOUT = 0.5A;
Supply current
OFF state; VCC = 24V;
TCASE = 25°C
ON state( all channels ON);
VCC = 24V, TCASE = 100°C
IS
ILGND
Output current at
turn-off
VCC = VSTAT = VIN = VGND = 24V
VOUT = 0V
IL(off)
OFF state output
current
VIN = VOUT = 0V;
VOUT(off)
OFF state output
voltage
VIN = 0V, IOUT = 0A
td(Vccon)
Power-on delay time
from VCC rising edge
Table 7.
Table 4.
Symbol
4/17
Power section
Min
Typ
Max
Unit
10.5
45
V
7
10.5
V
185
280
mΩ
mΩ
150
µA
12
mA
1
mA
5
µA
3
V
150
0
1
ms
Switching ( VCC = 24V )
Parameter
Test conditions
Min
Typ
Max
Unit
tON
Turn-on time
RL = 48Ω from 80%
VOUT Figure 6.
50
100
µs
tOFF
Turn-off time
RL = 48Ω to 10% VOUT Figure 6.
75
150
µs
dVOUT/dt(on) Turn-on voltage slope
RL = 48Ω from VOUT = 2.4V to
VOUT = 19.2V Figure 6.
0.7
V/µs
dVOUT/dt(off) Turn-off voltage slope
RL = 48Ω from VOUT = 21.6V to
VOUT = 2.4V Figure 6.
1.5
V/µs
VN808-E
Electrical characteristics
Table 5.
Symbol
Input pin
Parameter
VINL
Input low level
IINL
Low level input
current
VINH
Input high level
IINH
High level input
current
VI(HYST)
Input hysteresis
voltage
IIN
Table 6.
Symbol
Input current
Parameter
Case shut-down
temperature
TCR
Case reset
temperature
TCHYST
Case thermal
hysteresis
TR
VCC /2-1
V
VCC /2+1
V
VIN = VCC / 2 + 1V
150
260
0.6
VIN = VCC = 32V
Test conditions
µΑ
V
300
µΑ
Min
Typ
Max
Unit
125
130
135
°C
110
°C
150
175
Junction reset
temperature
135
DC Short circuit
current
VCC = 24V; RLOAD = 10mΩ
Turn-off output clamp
IOUT = 0.5A; L = 6mH
voltage
°C
200
°C
°C
7
15
°C
0.7
1.7
VCC-57 VCC-52 VCC-47
A
V
Status pin
Parameter
Test conditions
IHSTAT
High level output
current
VCC = 18...32V; RSTAT = 1KΩ
( Fault condition )
ILSTAT
Leakage current
Normal operation; VCC = 32V
Clamp voltage
ISTAT = 1mA
ISTAT = -1mA
VCLSTAT
Unit
µΑ
Junction shutdown
temperature
Ilim
Symbol
Max
80
VIN = VCC / 2 - 1V
15
Junction thermal
hysteresis
Table 7.
Typ
7
THYST
Vdemag
Min
Protections
TCSD
TTSD
Test conditions
Min
Typ
Max
Unit
2
3
4
mA
0.1
µA
8.0
V
V
6.0
6.8
-0.7
5/17
Pin connections
3
6/17
VN808-E
Pin connections
Figure 2.
Connection diagram (top view)
Table 8.
Pin functions
Pin N°
Symbol
TAB
VCC
Positive power supply voltage
1
VCC
Positive power supply voltage
2,3,4,5
NC
Not connected
6
Input 1
Input of channel 1
7
Input 2
Input of channel 2
8
Input 3
Input of channel 3
9
Input 4
Input of channel 4
10
Input 5
Input of channel 5
11
Input 6
Input of channel 6
12
Input 7
Input of channel 7
13
Input 8
Input of channel 8
14,15,16,17,18
NC
19
GND
20
STATUS
Common open source diagnostic for over-temperature
21,22
Output 8
High-Side output of channel 8
23,24
Output 7
High-Side output of channel 7
Function
Not connected
Logic ground
VN808-E
Pin connections
Table 8.
Pin functions (continued)
Pin N°
Symbol
25,26
Output 6
High-Side output of channel 6
27.28
Output 5
High-Side output of channel 5
29,30
Output 4
High-Side output of channel 4
31,32
Output 3
High-Side output of channel 3
33,34
Output 2
High-Side output of channel 2
35,36
Output 1
High-Side output of channel 1
Function
7/17
Current, voltage conventions and internal diagram
4
VN808-E
Current, voltage conventions and internal diagram
Figure 3.
Current and voltage conventions
Figure 4.
Equivalent internal block diagram (same structure for all channel)
VCC
STATUS
52V
6.8V
50V
50V
INn
110kΩ
13Ω
GND
8/17
OUTn
VN808-E
Current, voltage conventions and internal diagram
Figure 5.
Application example
Filter for bus inductance effect.,
Optional protection for
Make supply voltage stable and
Protection for IEC 61000-4-5
Avoid undervoltage shut-down
EMC filter
. . . . .
.
Vcc24V- 28,2V IEC61131
c/2
Vc
22µF
le
tib
pa
m
co
s
ut
inp
VCC disconnection.
Surge test suggested 1,5KE39xx
100nF
.
.
.
Vin 1
Vin 2
Imax 80µA
Load 2
.
Load 3
Vin 3
Vin 8
Load 1
10nF
Protection against
VN808
VN808-E
IEC 61000-4-6
Current injection test
Status
Load 8
Status output current
From 2 to 4 mA
RGND
10Ω protection against disconnection
On inductive loads
PROTECTIONS INCLUDED IN THE DEVICE:
IEC 61000-4-2 ESD test better than 2kV Human Body Model – IEC 61000-4-4 Burst test
Table 9.
Truth table
Conditions
INPUTn
OUTPUTn
STATUS
Normal operation
L
H
L
H
L
L
Current limitation
L
H
L
X
L
L
Overtemperature
(see waveforms 3, 4 Figure 8) -> TJ > TTSD
L
H
L
L
L
H
Undervoltage
L
H
L
L
X
X
9/17
Switching time waveforms
5
10/17
Switching time waveforms
Figure 6.
Turn-ON & turn-OFF
Figure 7.
VCC turn-ON
VN808-E
VN808-E
Switching time waveforms
Figure 8.
Waveforms
11/17
Switching time waveforms
Figure 8.
12/17
Waveforms ( continued )
VN808-E
VN808-E
6
Mechanical data
Mechanical data
In order to meet environmental requirements, ST offers these devices in ECOPACK®
packages. These packages have a Lead-free second level interconnect. The category of
second Level Interconnect is marked on the package and on the inner box label, in
compliance with JEDEC Standard JESD97. The maximum ratings related to soldering
conditions are also marked on the inner box label. ECOPACK is an ST trademark.
ECOPACK specifications are available at: www.st.com.
Table 10.
PowerSO-36 Mechanical Data
Dimensions
Ref.
mm
Min.
Typ.
A
a1
inch
Max.
Min.
Typ.
3.60
0.10
0.30
a2
Max.
0.1417
0.003
0.0118
3.30
0.1299
a3
0
0.10
0
0.0039
b
0.22
0.38
0.008
0.0150
c
0.23
0.32
0.009
0.0126
D (1)
15.80
16.00
0.622
0.6299
D1
9.40
9.80
0.370
0.3858
E
13.90
14.50
0.547
0.5709
E1 (1)
10.90
11.10
0.429
0.4370
E2
E3
2.90
5.8
6.2
0.1142
0.228
0.2441
e
0.65
0.025
e3
11.05
0.435
G
0
0.10
0.000
0.0039
H
15.50
15.90
0.610
0.6260
h
L
1.10
0.80
N
S
1.10
0.0433
0.031
10°
0°
8°
0.0433
10°
0°
8°
13/17
Mechanical data
Figure 9.
14/17
VN808-E
PowerSO-36 drawings
VN808-E
7
Order codes
Order codes
Table 11.
Order codes
Part number
Package
Packaging
VN808-E
PowerSO-36
Tube
VN808TR-E
PowerSO-36
Tape and reel
15/17
Revision history
8
VN808-E
Revision history
Table 12.
16/17
Revision history
Date
Revision
Changes
13-Sep-2005
1
Initial release
1-Mar-2007
2
Document reformatted
12-Mar-2007
3
Typo in Figure 3.
26-Mar-2007
4
Typo note Table 2.
VN808-E
Please Read Carefully:
Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries (“ST”) reserve the
right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any
time, without notice.
All ST products are sold pursuant to ST’s terms and conditions of sale.
Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no
liability whatsoever relating to the choice, selection or use of the ST products and services described herein.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this
document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products
or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such
third party products or services or any intellectual property contained therein.
UNLESS OTHERWISE SET FORTH IN ST’S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED
WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED
WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS
OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT.
UNLESS EXPRESSLY APPROVED IN WRITING BY AN AUTHORIZED ST REPRESENTATIVE, ST PRODUCTS ARE NOT
RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING
APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY,
DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS "AUTOMOTIVE
GRADE" MAY ONLY BE USED IN AUTOMOTIVE APPLICATIONS AT USER’S OWN RISK.
Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void
any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any
liability of ST.
ST and the ST logo are trademarks or registered trademarks of ST in various countries.
Information in this document supersedes and replaces all information previously supplied.
The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners.
© 2007 STMicroelectronics - All rights reserved
STMicroelectronics group of companies
Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan Malaysia - Malta - Morocco - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America
www.st.com
17/17