MBRS1035CT - MBRS10150CT 10.0 AMPS. Surface Mount Schottky Barrier Rectifiers D2PAK Features Plastic material used carries Underwriters Laboratory Classifications 94V-0 Metal silicon junction, majority carrier conduction Low power loss, high efficiency High current capability, low forward voltage drop High surge capability For use in low voltage, high frequency inverters, free wheeling, and polarity protection applications Guardring for overvoltage protection Higho temperature soldering guaranteed: 260 C/10 seconds,0.25”(6.35mm)from case Mechanical Data Dimensions in inches and (millimeters) 2 Cases: JEDEC D PAK molded plastic body Terminals: Pure tin plated, lead free. solderable per MIL-STD-750, Method 2026 Polarity: As marked Mounting position: Any Mounting torque: 5 in. - lbs. max Weight: 0.08 ounce, 2.24 grams Maximum Ratings and Electrical Characteristics o Rating at 25 C ambient temperature unless otherwise specified. Single phase, half wave, 60 Hz, resistive or inductive load. For capacitive load, derate current by 20% Symbol MBRS MBRS MBRS MBRS MBRS MBRS MBRS Type Number Maximum Recurrent Peak Reverse Voltage Maximum RMS Voltage Maximum DC Blocking Voltage Maximum Average Forward Rectified Current See Fig. 1 Peak Forward Surge Current, 8.3 ms Single Half Sine-wave Superimposed on Rated Load (JEDEC method ) Peak Repetitive Reverse Surge Current (Note 1) Maximum Instantaneous Forward Voltage at (Note 2) IF=5.0A, Tc=25oC o IF=5.0A, Tc=125 C o IF=10A, Tc=25 C IF=10A, Tc=125oC VRRM VRMS VDC 1035 CT 1045 CT 1050 CT 1060 CT 35 24 35 45 31 45 50 35 50 60 42 60 Maximum Thermal Resistance, Junction to Case Operating Junction Temperature Range 100 70 100 150 105 150 V V V I(AV) A IFSM 120 A IRRM 1.0 A 0.70 0.57 0.80 0.67 VF 0.80 0.65 0.90 0.75 0.85 0.75 0.95 0.85 0.88 0.78 0.98 0.88 V 0.1 IR 15 10 2.0 TJ -65 to +150 TSTG 1. 2.0us Pulse Width, f=1.0 KHz 2. Pulse Test: 300us Pulse Width, 1% Duty Cycle 3. Thermal Resistance from Junction to Case Per Leg. - 56 - mA mA 5.0 RθJC Storage Temperature Range Notes: 90 63 90 Units 10 o Maximum Instantaneous Reverse Current @ Tc=25 C o At Rated DC Blocking voltage (Note 2) @ Tc=125 C 1090 10100 10150 CT CT CT -65 to +175 o C/W o C o C Version: B07 RATINGS AND CHARACTERISTIC CURVES (MBRS1035CT THRU MBRS10150CT) FIG.1- FORWARD CURRENT DERATING CURVE FIG.2- MAXIMUM NON-REPETITIVE FORWARD SURGE CURRENT 180 RESISTIVE OR INDUCTIVE LOAD PEAK FORWARD SURGE CURRENT. (A) AVERAGE FORWARD CURRENT. (A) 12 10 8 6 4 2 0 0 50 100 o CASE TEMPERATURE. ( C) Tj=Tj max. 8.3ms Single Half Sine-Wave JEDEC Method 150 120 90 60 30 0 150 0.1 FIG.3- TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS PER LEG 50 1 10 100 NUMBER OF CYCLES AT 60Hz FIG.4- TYPICAL REVERSE CHARACTERISTICS 50 INSTANTANEOUS REVERSE CURRENT. (mA) INSTANTANEOUS FORWARD CURRENT. (A) 10 MBRS1035CT-1045CT 20 10 5 MBRS1050CT-1060CT 3 MBRS10150CT Tj=125 0C 1 Tj=75 0C 0.1 0.01 1 Tj=25 0C MBRS1090CT-10100CT 0.5 0 0.001 0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 FORWARD VOLTAGE. (V) 1.0 1.1 1.2 1.3 60 80 100 120 140 100 TRANSIENT THERMAL IMPEDANCE. ( OC/W) JUNCTION CAPACITANCE.(pF) 40 FIG.6- TYPICAL TRANSIENT THERMAL CHARACTERISTICS PER LEG FIG.5- TYPICAL JUNCTION CAPACITANCE 5,000 0 Tj=25C f=1.0MHz Vsig=50mVp-p 1,000 500 100 0.1 20 PERCENT OF RATED PEAK REVERSE VOLTAGE. (%) 1 10 REVERSE VOLTAGE. (V) 100 10 1 0.1 0.01 0.1 1 10 T, PULSE DURATION. (sec) Version: B07 100