MBRS1535CT THRU MBRS15100CT 15.0 AMPS. Schottky Barrier Rectifiers Voltage Range 35 to 100 Volts Current 15.0 Amperes D2PAK Features For surface mounted application Plastic material used carries Underwriters Laboratory Classifications 94V-0 Metal silicon junction, majority carrier conduction Low power loss, high efficiency High current capability, low forward voltage drop High surge capability For use in low voltage, high frequency inverters, free wheeling, and polarity protection applications Guardring for transient protection High temperature soldering guaranteed: 250oC/10 seconds, at terminals Mechanical Data Cases: JEDEC D2PAK molded plastic body Terminals: Leads solderable per MIL-STD-750, Method 2026 Polarity: As marked Mounting position: Any Mounting torque: 5 in. - lbs. max Weight: 0.06 ounce,1.70 grams Dimensions in inches and (millimeters) Maximum Ratings and Electrical Characteristics Rating at 25℃ambient temperature unless otherwise specified. Single phase, half wave, 60 Hz, resistive or inductive load. For capacitive load, derate current by 20% Type Number Maximum Recurrent Peak Reverse Voltage Maximum RMS Voltage Maximum DC Blocking Voltage Maximum Average Forward Rectified Current at TC=105oC Peak Repetitive Forward Current (Rated V R, Square Wave, 20KHz) at Tc=105oC Peak Forward Surge Current, 8.3 ms Single Half Sine-wave Superimposed on Rated Load (JEDEC method ) Peak Repetitive Reverse Surge Current (Note 1) Maximum Instantaneous Forward Voltage at (Note 2) IF=7.5A, Tc=25OC IF=7.5A, Tc=125OC IF=15A, Tc=25OC IF=15A, Tc=125OC Maximum Instantaneous Reverse Current @ Tc=25℃ at Rated DC Blocking Voltage (Note 2) @ Tc=125℃ Voltage Rate of Change (Rated VR) MBRS MBRS MBRS MBRS MBRS MBRS 1535CT 1545CT 1550CT 1560CT 1590CT 15100CT 35 24 35 45 31 45 50 35 50 60 42 60 90 63 90 100 70 100 A 15.0 A 150 0.75 0.65 - 0.1 15.0 1.0 50.0 1,000 50.0 2.0 -65 to +150 -65 to +175 Storage Temperature Range TSTG A 0.5 0.57 0.84 0.72 Operating Junction Temperature Range TJ Notes: 1. 2.0us Pulse Width, f=1.0 KHz 2. Pulse Test: 300us Pulse Width, 1% Duty Cycle 3. Thermal Resistance from Junction to Case and Thermal Resistance from Junction to Ambient - 62 - V V V 15 1.0 Maximum Thermal Resistance Per Leg (Note 3) RθJA RθJC Units A 0.92 0.82 - 0.1 - V mA mA V/uS ℃/W ℃ ℃ RATINGS AND CHARACTERISTIC CURVES (MBRS1535CT THRU MBRS15100CT) FIG.1- FORWARD CURRENT DERATING CURVE 300 RESISTIVE OR INDUCTIVE LOAD 20 PEAK FORWARD SURGE CURRENT. (A) AVERAGE FORWARD CURRENT. (A) 25 15 10 5 0 0 50 100 FIG.2- MAXIMUM NON-REPETITIVE FORWARD SURGE CURRENT PER LEG 200 150 100 50 0 150 o CASE TEMPERATURE. ( C) 100 10 FIG.4- TYPICAL REVERSE CHARACTERISTICS PER LEG FIG.3- TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS PER LEG 50 Tj=125 0C 10 1 NUMBER OF CYCLES AT 60Hz 10 INSTANTANEOUS REVERSE CURRENT. (mA) INSTANTANEOUS FORWARD CURRENT. (A) 40 Tj=Tj max. 8.3ms Single Half Sine Wave JEDEC Method 250 Pulse Width=300 s 1% Duty Cycle 1 Tj=25 0C 0.1 MBRS1535CT-MBRS1545CT MBRS1550CT-MBRS1560CT MBRS1590CT-MBRS15100CT Tj=125 0C 1 0.1 Tj=75 0C MBRS1535CT-MBRS1545CT MBRS1550CT-MBRS15100CT 0.01 Tj=25 0C 0.01 0 0.1 0.2 0.001 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 1.1 1.2 FORWARD VOLTAGE. (V) FIG.5- TYPICAL JUNCTION CAPACITANCE PER LEG TRANSIENT THERMAL IMPEDANCE. ( OC/W) JUNCTION CAPACITANCE.(pF) 20 40 60 80 100 120 140 PERCENT OF RATED PEAK REVERSE VOLTAGE. (%) FIG.6- TYPICAL TRANSIENT THERMAL CHARACTERISTICS PER LEG 4,000 Tj=25 0C f=1.0MHz Vsig=50mVp-p 1,000 0 100 10.0 100 40 MBRS1535CT-MBRS1545CT MBRS1550CT-MBRS1560CT MBRS1590CT-MBRS15100CT 0.1 1.0 10 REVERSE VOLTAGE. (V) 100 1 0.1 0.01 0.1 1 T, PULSE DURATION. (sec) - 63 - 10 100