UTC TIP122 NPN EPITAXIAL PLANAR TRANSISTOR NPN EPITAXIAL TRANSISTOR DESCRIPTION The UTC TIP122 is a NPN epitaxial transistor, designed for use in general purpose amplifier low-speed switching applications. 1 TO-126 1:EMITTER 2:COLLECTOR 3:BASE ABSOLUTE MAXIMUM RATINGS (Ta=25°C) PARAMETER SYMBOL RATINGS UNIT VCBO VCEO VEBO Ic PC Tstg Tj 100 100 5 5 40 -55 ~ +150 150 V V V A W °C °C Collector to Base Voltage Collector to Emitter Voltage Emitter to Base Voltage Collector Current Collector Dissipation (Tc=25℃) Storage Temperature Junction Temperature ELECTRICAL CHARACTERISTICS(Ta=25°C, unless otherwise specified ) PARAMETER SYMBOL Collector-Emitter Breakdown Voltage Collector Cut-Off Current Collector-Cut-Off Current Emitter Cut-Off Current Collector-Emitter Saturation Voltage Collector-Emitter Saturation Voltage Base-Emitter Saturation Voltage DC Current Gain BVCEO ICBO ICEO IEBO VCE(SAT)1 VCE(SAT)2 VBE(ON) UTC hFE TEST CONDITIONS IC=100mA VCB=100V VCE=50V VEB=5V IC=3A, IB=12mA IC=5A, IB=20mA VCE=3V, IC=3A IC=500mA, VCE=3V IC=3A, VCE=3V MIN. TYP. MAX. UNIT 200 500 2 2 4 2.5 V uA uA mA V V V 100 1000 1000 UNISONIC TECHNOLOGIES CO., LTD. 1 QW-R204-016,A UTC TIP122 NPN EPITAXIAL PLANAR TRANSISTOR SOA SAFE OPERATI NG AREA 10000 10 IC, COLLECTOR CURRENT-(A) C O L L E C T O RC U R R E N T- m A 1000 100 10 1 1 0.1 1 10 100 FORWARD VOLTAGE- - - VCE( V) 1000 10 1 VCEO,COLLECTOR TO EMITTER VOLTAGE-(V) PT=1MS PT=1ms PT=100ms 100 PT=10MS PT=1s VBE(SAT) VS. IC VBE(ON) VS. IC 1000 10000 V BE VBE(ON)-(MV) 1000 1000 100 1000 IC , COLLECTOR CURRENT UTC 1000 100 10000 1000 IC , COLLECTOR CURRENT UNISONIC TECHNOLOGIES CO., LTD. 2 QW-R204-016,A UTC TIP122 NPN EPITAXIAL PLANAR TRANSISTOR hFE VS. IC VCE(SAT) VS. IC 10000 10000 VCE(SAT)-(MV) hFE, DC CURRENT GAIN 1000 1000 100 10 100 100 1 10 1 100 1000 10000 1000 1000 IC , COLLECTOR CURRENT ( MA ),IC=250IB IC , COLLECTOR CURRENT UTC assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all UTC products described or contained herein. UTC products are not designed for use in life support appliances, devices or systems where malfunction of these products can be reasonably expected to result in personal injury. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice. UTC UNISONIC TECHNOLOGIES CO., LTD. 3 QW-R204-016,A