UTC MJE2955T PNP EPITAXIAL SILICON TRANSISTOR HIGH VOLTAGE TRANSISTOR DESCRIPTION The UTC MJE2955T is designed for general purpose of amplifier and switching applications. 1 TO-220 1:BASE 2: COLLECTOR 3: EMITTER ABSOLUTE MAXIMUM RATINGS ( Operating temperature range applies unless otherwise specified ) PARAMETER SYMBOL RATING UNIT VCBO VCEO VEBO Pc Ic Tj TSTG IB 70 60 5 75 10 150 -55 ~ +150 6 V V V W A °C °C A Collector-base voltage Collector-emitter voltage Emitter-base voltage Total Power Dissipation(Ta=25°C) Collector current Junction Temperature Storage Temperature Base Current ELECTRICAL CHARACTERISTICS(Ta=25°C,unless otherwise specified) PARAMETER SYMBOL TEST CONDITIONS MIN Collector-emitter breakdown voltage Collector-Base Breakdown Voltage Emitter-Base Breakdown Voltage Collector cut-off current BVCEO VBCBO BVEBO ICBO ICEO ICEX IEBO VCE(SAT)1 VCE(SAT)2 VBE(ON) hFE1 hFE2 fT Ic=200mA Ic=10mA IE=10mA VCB=70V VCE=30V VCE=70V,VEB(off)=1.5V VEB=5V IC=4A,IB=0.4A IC=10A,IB=3.3A VCE=4V,IC=4A IC=4A,VCE=4V IC=10A,VCE=4V VCE=10V,IC=0.5A,f=1MHz 60 70 5 Emitter cut-off current Collector-emitter saturation voltage Baser-emitter on voltage DC current gain Current gain bandwidth product UTC TYP 20 5 2 UNISONIC TECHNOLOGIES CO. LTD MAX 1 700 1 5 1.1 8.0 1.8 100 UNIT V V V mA µA mA mA V V MHZ 1 QW-R203-012,B UTC MJE2955T PNP EPITAXIAL SILICON TRANSISTOR TYPICAL CHARACTERISTIC Base-Emitter Saturation Voltage Collector-Emitter Saturation Voltage 1000 DC CURRENT GAIN, h FE VCE = -2V 100 10 1 -0.01 -0.1 -1 COLLECTOR CURRENT, I -10 C SATURATION VOLTAGE, V BE(sat), VCE(sat) (V) DC current Gain -10 IC = 10IB VBE(sat) -1 -0.1 VCE(sat) -0.01 -0.1 (A) -1 Safe Operating Area (A) Power Derating POWER DISSIPATIOAN, P C (W) (A) C -10 1 5m ms s µs DC 100 COLLECTOR CURRENT, I -100 C 105 -100 -1 -0.1 -10 COLLECTOR CURRENT, I -1 -10 -100 COLLECTOR-EMITTER VOLTAGE, V CE (V) 90 75 60 45 30 15 0 0 25 50 75 100 125 150 175 CASE TEMPERATURE, T C (℃) UTC assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all UTC products described or contained herein. UTC products are not designed for use in life support appliances, devices or systems where malfunction of these products can be reasonably expected to result in personal injury. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice. UTC UNISONIC TECHNOLOGIES CO. LTD 2 QW-R203-012,B