Version 1.1 tfs112K.doc VI TELEFILTER Filter Specification 12.02.2001 TFS 112K - 1/5 1. Measurement condition : Ambient temperature TA: Input power level: Terminating impedances at fc: Q-value of matching elements: 23 °C 0 dBm. for input: for output: 50...70 565 Ω - 6,5 pF. 650 Ω - 5,7 pF. 2. Characteristics : Remark: Reference level for the relative attenuation arel of the TFS 112K is the minimum of the passband attenuation amin. The minimum of the passband attenuation amin is defined as the insertion loss ae. The reference frequency fc is the arithmetic mean value of the upper and lower frequencies at the 30 dB filter attenuation level relative to the insertion loss ae. Data typ. value tolerance / limit Insertion loss (Reference level) ae 13,5 dB max. 112,32 MHz 112,320 ± 0,035 MHz 1,05 1,72 2,17 2,45 2,66 MHz MHz MHz MHz MHz Reference frequency fc ( BW(-30 dB) ) Bandwidth at ambient temperature: 3 dB bandwidth 10 dB bandwidth 20 dB bandwidth 30 dB bandwidth 40 dB bandwidth Relative attenuation fc ......... fc fc ± 0,475 MHz ... fc fc ± 1,175 MHz ... fc fc ± 1,300 MHz ... fc fc ± 1,475 MHz ... fc fc + 5,0 MHz ... fc fc + 12,5 MHz ... fc fc - 20 MHz ... fc arel ± 0,475 ± 0,815 ± 1,300 ± 1,475 ± 5,0 + 12,5 + 20 5,5 MHz MHz MHz MHz MHz MHz MHz MHz Average group delay in fc ....fc ± 800 kHz : Group delay ripple in fc ....fc ± 800 kHz : Frequency inversion temperature ( To ) Temperature coefficient ( Tc1f ) 1st order *) Temperature coefficient ( Tc2f ) 2nd order **) 45 40...43 42...45 42...45 1,35 150 VDC Vpp dB - dB dB dB dB max. max. min. min. min. min. min. min. 3 10 20 30 40 35 40 40 dB dB dB dB dB dB dB dB µs ns max. 300 ns 20 °C 0 ppm/K - 0,036 ppm/K² Operating temperature range Storage temperature range Input power level Permissible DC voltage Permissible AC voltage 14 max. ± 7,5 ppm/K - 20 °C ... + 85 °C - 25 °C ... + 90 °C - max. 10 12 10 dBm V V *) ∆fc(Hz) = Tc1f(ppm/K) x (T - To) x fTo (MHz) ** ) ∆fc(Hz) = Tc2f(ppm/K) x (T - To)² x fTo (MHz) fTo is reference frequency fc at frequency inversion temperature (To ) Generated: Dunzow W. Checked/Approved: VI TELEFILTER Potsdamer Straße 18 D 14 513 TELTOW / Germany Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30 e-mail: [email protected] Vectron International, Inc. 267 Lowell Road Hudson, NH 03051 / USA Tel: (603) 598-0070 Fax: (603) 598-0075 e-mail: [email protected] VI TELEFILTER reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information. Version 1.1 tfs112K.doc VI TELEFILTER Filter Specification 3. Package and pin connection : 12.02.2001 TFS 112K - 2/5 (All dimensions in mm) TFS 112K tft N3 6,4 ±0,2 1 Datecode: L M N ....... 13,20 ±0,20 Year+month 1999 2000 2001 ......... 3,0 Max. 10,16 5,08 2 3 1 4 5 3 10 9 8 12,0 7 1 - Balanced input 5 - Balanced output 2 - Balanced input 4 - Balanced output 3 - Package Ground. 7, 8, 9 - Not Connected Ground. 6 6 4. 50 Ω - matching network ( Principal scheme ) : 10 8 TFS tft L1 50 Ω 9 C1 1 2 7 6 112K N3 3 4 L4 5 L3 L2 10 9 8 TFS tft C1 50 Ω 50 Ω C2 L1 1 2 7 6 112K N3 3 C2 4 C4 5 50 Ω L2 C3 About matching element values and unbalanced Scheme see Application Note. VI TELEFILTER Potsdamer Straße 18 D 14 513 TELTOW / Germany Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30 e-mail: [email protected] Vectron International, Inc. 267 Lowell Road Hudson, NH 03051 / USA Tel: (603) 598-0070 Fax: (603) 598-0075 e-mail: [email protected] VI TELEFILTER reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information. Version 1.1 tfs112K.doc VI TELEFILTER Filter Specification 12.02.2001 TFS 112K - 3/5 5. Stability Characteristics : After the following tests the filter shall meet the whole specification: 1. Shock: 500g, 18 ms, half sine wave, 3 shocks each plane; DIN IEC 68 T2 - 27 2. Vibration: 10 Hz to 500 Hz, 0,35 mm or 5g respectively, 1 octave per min, 10 cycles per plan, 3 plans; DIN IEC 68 T2 - 6 3. Resistance to solder heat (reflow): max. 2 times reflow process; for temperature conditions refer to the attached "Air reflow temperature conditions" on page 4; 6. Packing : Tape & Reel: DIN IEC 286 - 3, with exception of value for N and minimum bending radius; tape type II, embossed carrier tape with top cover tape on the upper side; max. pieces of filters per reel: Real of empty components at start: Real of empty components at start including leader: Trailer 1700 min 300 mm min 500 mm min 300 mm EMBOSSED CARRIER TAPE Tape (all dimensions in mm) W Po Do E F G (min) P2 P1 D1(min) Ao Bo CT : : : : : : : : : : : : 24 ± 0,3 4 ± 0,1 1,5 + 0,1 1,75 ± 0,1 11,5 ± 0,1 0,6 2 ± 0,1 12 ± 0,1 1,5 7,1 ± 0,2 13,9 ± 0,2 21,5 ± 0,1 Do Po P 2 E A o F D CT B 1 W o G P1 COVER TAPE W 2 Reel (all dimensions in mm): A : W1 W2 (max) : : N (min) : 330 24,4 +2 30,4 60 C C : 13 +0,5/-0,2 A N W 1 The minimum bending radius is 45 mm. The mounting surface of the filters faces the bottom side of the embossed carrier tape. The marking of the filters is able to read if the view is directed on the upper side of the carrier tape with the sprocket holes on the right side of the tape. VI TELEFILTER Potsdamer Straße 18 D 14 513 TELTOW / Germany Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30 e-mail: [email protected] Vectron International, Inc. 267 Lowell Road Hudson, NH 03051 / USA Tel: (603) 598-0070 Fax: (603) 598-0075 e-mail: [email protected] VI TELEFILTER reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information. Version 1.1 tfs112K.doc VI TELEFILTER Filter Specification 12.02.2001 TFS 112K - 4/5 7. Air reflow temperature conditions : 1st and 2nd air reflow profile Name: Temperature: Time: pre-heating periods main-heating periods 150 °C - 170 °C over 200 °C 60 sec. - 90 sec. 20 sec. - 25 sec. peak temperature 255 °C ± 5 °C Air reflow profile 260 240 220 200 temperature / °C 180 160 140 120 100 80 60 40 20 0 0 20 40 60 80 100 120 140 160 180 200 220 240 time / sec. Table for temperature vs. time during the air reflow process Tolerance of temperatures: ± 5 °C time / sec. 0 10 20 30 40 50 60 70 80 90 100 110 120 130 temperature / °C 23 34 46 60 80 103 121 134 143 150 154 156 158 159 VI TELEFILTER Potsdamer Straße 18 D 14 513 TELTOW / Germany Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30 e-mail: [email protected] time / sec. 140 150 160 170 180 190 195 200 205 210 215 220 230 240 temperature / °C 160 161 164 170 180 205 230 255 230 205 180 165 140 120 Vectron International, Inc. 267 Lowell Road Hudson, NH 03051 / USA Tel: (603) 598-0070 Fax: (603) 598-0075 e-mail: [email protected] VI TELEFILTER reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information. Version 1.1 tfs112K.doc VI TELEFILTER Filter Specification 12.02.2001 TFS 112K - 5/5 8. History : Version Reason of Changes Name Date 1.0 Generate filter specification according to customer requirements. Dunzow W. 03.01.2000 1.1 Format correctionn. Dunzow W. 12.02.2001 VI TELEFILTER Potsdamer Straße 18 D 14 513 TELTOW / Germany Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30 e-mail: [email protected] Vectron International, Inc. 267 Lowell Road Hudson, NH 03051 / USA Tel: (603) 598-0070 Fax: (603) 598-0075 e-mail: [email protected] VI TELEFILTER reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information.