VECTRON TFS360A

tfs360A.doc
version 1.6
12.04.2001
_____________________________________________________________________________________________________
VI
TELEFILTER
Filter Specification
TFS 360A 1/5
_____________________________________________________________________________________________________
Measurement condition
Ambient temperature:
23 °C
Input power level:
0 dBm
Terminating impedances
for input:
360 Ω // - 1,05 pF
for output:
360 Ω // - 1,05 pF
Coupling coil:
91 nH
Characteristics
Remark:
Reference level for the relative attenuation arel of the TFS 360 A is the minimum of the pass band attenuation amin. The minimum of the pass band
attenuation amin is defined as the insertion loss ae. The centre frequency fo is the arithmetic mean value of the upper and lower frequencies at the
1.5 dB filter attenuation level relative to the insertion loss ae. The nominal frequency fN is fixed on 360 MHz without tolerance. The given values for
the relative attenuation arel and for the group delay ripple have to be reached at the frequencies given below also if the centre frequency fo is shifted
due to the temperature coefficient of frequency TCf in the operating temperature range and due to a production tolerance for the centre frequency fo.
Data
typ. value
tolerance/limit
_____________________________________________________________________________________________________
Insertion loss
ae = amin
max.
5,0
dB
(Reference level)
_____________________________________________________________________________________________________
Nominal frequency
360,00 MHz
fN
_____________________________________________________________________________________________________
Pass band ripple fN ± 67,7kHz
BW
max.
1,5
dB
_____________________________________________________________________________________________________
Relative attenuation
arel
fN ± 0,4 MHz…fN ± 0,6 MHz
min.
29
dB
fN ± 0,6 MHz…fN ± 0,8 MHz
min.
42
dB
fN ± 0,8 MHz…fN ± 1,6 MHz
min.
50
dB
fN ± 1,6 MHz…fN ± 3,0 MHz
min.
45
dB
fN ± 3,0 MHz…fN ± 115 MHz
min.
52
dB
_____________________________________________________________________________________________________
Group delay ripple
GD
fN ± 67,76 kHz
max.
2,0
µs
_____________________________________________________________________________________________________
Input power level
max.
10
dBm
_____________________________________________________________________________________________________
- 20 °C ... + 75 °C
-35 °C …+ 85 °C
Operating temperature range
Storage temperature
__________________________________________________________________________________________
Temperature coefficient of frequency
TC
ca. - 0.036
ppm/K²
__________________________________________________________________________________________
Frequency inversion temperature
+ 20 °C
_____________________________________________________________________________________________________
Generated:
Checked / approved:
VI TELEFILTER
Vectron International Inc.
Potsdamer Straße 18
267 Lowell Road
D 14 513 TELTOW / Germany
Hudson, NH 03051 / USA
Tel: (+49) 3328 4784-52 / Fax: (+49) 3328 4784-30
Tel: (603) 598-0070 Fax: (603) 598-0075
E-Mail: [email protected]
E-Mail: [email protected]
VI TELEFILTER reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is
assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information.
tfs360A.doc
version 1.6
12.04.2001
_____________________________________________________________________________________________________
VI
TELEFILTER
Filter Specification
TFS 360A 2/5
_____________________________________________________________________________________________________
Construction, pin configuration and 50 Ω - matching network
(All dimensions in mm)
5
7
360A
M11
3
1
Pin 1
Pin 2
Pin 3
Pin 4
Sym. Output
Sym. Output
External Coil
Package Ground
Pin 5
Pin 6
Pin 7
Pin 8
Sym. Input
Sym. Input
Ground
Package ground
50 Ohm Test circuit 1
LB-IN
L1
6
SAW
C1
LB-OUT
C2
2
5
L2
L3
1
L4
3
L5
4, 7, 8
50 Ohm Test circuit 2
C1
C3
LB-IN
6
SAW
L1
LB-OUT
1
L2
2
5
C2
C4
3
4, 7, 8
L3
VI TELEFILTER
Vectron International Inc.
Potsdamer Straße 18
267 Lowell Road
D 14 513 TELTOW / Germany
Hudson, NH 03051 / USA
Tel: (+49) 3328 4784-52 / Fax: (+49) 3328 4784-30
Tel: (603) 598-0070 Fax: (603) 598-0075
E-Mail: [email protected]
E-Mail: [email protected]
VI TELEFILTER reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is
assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information.
tfs360A.doc
version 1.6
12.04.2001
_____________________________________________________________________________________________________
VI
TELEFILTER
Filter Specification
TFS 360A 3/5
_____________________________________________________________________________________________________
Stability Characteristics
After the following tests the filter shall meet the whole specification:
1. Shock:
500g, 18 ms, half sine wave, 3 shocks each plane;
DIN IEC 68 T2 - 27
2. Vibration:
10 Hz to 500 Hz, 0,35 mm or 5g respectively, 1 octave per min, 10 cycles per plan, 3 plans;
DIN IEC 68 T2 - 6
3. Damp heat:
(cycle)
25 °C to 55°C / 95% r.H. / 10 cycles
DIN IEC 68 - 2 – 30 Db
4. Resistance to
solder heat (reflow):
max. 2 times reflow process;
for temperature conditions refer to the attached "Air reflow temperature conditions" on page 4;
Packing
Tape & Reel:
IEC 286 - 3, with exception of value for N and minimum bending radius;
tape type II, embossed carrier tape with top cover tape on the upper side;
max. pieces of filters per reel:
Real of empty components at start:
Real of empty components at start including leader:
Trailer
3000
min 300 mm
min 500 mm
min 300 mm
Tape (all dimensions in mm)
EMBOSSED CARRIER
TAPE
W
:
12
± 0,3
Po
:
4
± 0,1
Do
:
1,5
+ 0,1
E
:
1,75 ± 0,1
Po
D o
P
2
E
A
F
:
o
5,5 ± 0,1
F
G (min) :
P2
:
P1
D
0,75
13,4
2
± 0,05
± 0,1
:
4
D1(min) :
1,5
Ao
:
5,3
± 0,1
Bo
:
5,3
± 0,1
1
± 0,1
B
W
o
G
P1
COVER TAPE
W 2
Reel (all dimensions in mm):
A
W1
W2 (max) :
N (min)
:
:
330
12,4 +2
18,4
:
50
C
C
:
13
± 0,25
A
N
W 1
The minimum bending radius is 45 mm. The mounting surface of the filters faces the bottom side of the embossed carrier tape.
The marking of the filters is able to read if the view is directed on the upper side of the carrier tape with the sprocket holes on
the right side of the tape
VI TELEFILTER
Vectron International Inc.
Potsdamer Straße 18
267 Lowell Road
D 14 513 TELTOW / Germany
Hudson, NH 03051 / USA
Tel: (+49) 3328 4784-52 / Fax: (+49) 3328 4784-30
Tel: (603) 598-0070 Fax: (603) 598-0075
E-Mail: [email protected]
E-Mail: [email protected]
VI TELEFILTER reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is
assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information.
tfs360A.doc
version 1.6
12.04.2001
_____________________________________________________________________________________________________
VI
TELEFILTER
Filter Specification
TFS 360A 4/5
_____________________________________________________________________________________________________
Trailer 500 mm Min.
Leader 500 mm Min.
PIN 1
User direction of feed
Air reflow temperature conditions
1st and 2nd air reflow profile
Name:
Temperature:
Time:
pre-heating periods
150 °C - 170 °C
60 sec. - 90 sec.
main-heating periods
over 200 °C
20 sec. - 25 sec.
peak temperature
255 °C ± 5 °C
Chip-mount air reflow profile
260
240
220
200
temperature / °C
180
160
140
120
100
80
60
40
20
0
0
20
40
60
80
100
120
140
160
180
200
220
240
time / sec.
Table for temperature vs. time during the air reflow process
Tolerance of temperatures: ± 5 °C
time / sec.
0
temperature / °C
23
time / sec.
140
temperature / °C
160
VI TELEFILTER
Vectron International Inc.
Potsdamer Straße 18
267 Lowell Road
D 14 513 TELTOW / Germany
Hudson, NH 03051 / USA
Tel: (+49) 3328 4784-52 / Fax: (+49) 3328 4784-30
Tel: (603) 598-0070 Fax: (603) 598-0075
E-Mail: [email protected]
E-Mail: [email protected]
VI TELEFILTER reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is
assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information.
tfs360A.doc
version 1.6
12.04.2001
_____________________________________________________________________________________________________
VI
TELEFILTER
Filter Specification
TFS 360A 5/5
_____________________________________________________________________________________________________
10
20
30
40
50
60
70
80
90
100
110
120
130
34
46
60
80
103
121
134
143
150
154
156
158
159
150
160
170
180
190
195
200
205
210
215
220
230
240
161
164
170
180
205
230
255
230
205
180
165
140
120
History
Version
Reason of Changes
Name
Date
1.5
Change date code from month to week
Change errors in tape an reel information
Remove ‘Construction and Pin Connection’ from page 1
Guarantee better values for stability characteristic
Dr. Wall
17.03.2000
1.6
Tape drawing with part position added.
André du Hamél 12.04.2001
VI TELEFILTER
Vectron International Inc.
Potsdamer Straße 18
267 Lowell Road
D 14 513 TELTOW / Germany
Hudson, NH 03051 / USA
Tel: (+49) 3328 4784-52 / Fax: (+49) 3328 4784-30
Tel: (603) 598-0070 Fax: (603) 598-0075
E-Mail: [email protected]
E-Mail: [email protected]
VI TELEFILTER reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is
assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information.