7070 POWER INDUCTORS Outgassing Compliant Power Inductors AE541PYA ■ High temperature materials allow operation in ambient temperatures up to 155°C ■ Passes NASA low outgassing specifications ■ Passes vibration testing to 80 G and shock testing to 1000 G ■ Tin-lead (Sn-Pb) termination for the best possible board adhesion ■ High current and very low DCR ■ Soft saturation makes them ideal for VRM/VRD applications. Core material Composite Terminations Tin-lead (63/37) over copper. Weight 1.9 – 2.1g Ambient temperature –55°C to +105°C with Irms current, +105°C to +155°C with derated current Storage temperature Component: –55°C to +155°C. Tape and reel packaging: –55°C to +80°C Resistance to soldering heat Max three 40 second reflows at +260°C, parts cooled to room temperature between cycles Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30°C / 85% relative humidity) Enhanced crush-resistant packaging 150 per 7″reel Plastic tape: 16 mm wide, 0.3 mm thick, 12 mm pocket spacing, 7.21 mm pocket depth Inductance2 Part number1 ±20% (µH) AE541PYA161MSZ 0.16 AE541PYA301MSZ 0.30 AE541PYA551MSZ 0.55 AE541PYA651MSZ 0.65 AE541PYA801MSZ 0.80 AE541PYA102MSZ 1.0 AE541PYA122MSZ 1.2 AE541PYA182MSZ 1.8 AE541PYA222MSZ 2.2 AE541PYA332MSZ 3.3 AE541PYA472MSZ 4.7 AE541PYA562MSZ 5.6 AE541PYA682MSZ 6.8 Irms (A)6 (mOhms)3 SRF (MHz)4 Isat5 typ max min typ (A) 20°C rise 40°C rise 0.75 0.83 166207 78.0 22.9 27.1 1.06 1.17 108135 55.6 19.6 25.1 1.421.56 718943.017.6 21.8 1.751.93 597440.015.8 19.9 2.082.29 546737.815.6 19.4 2.552.81 516434.815.0 18.8 3.103.41 344331.212.2 16.2 4.054.46 344325.011.9 15.8 5.736.33 283519.6 9.9 13.4 8.569.42 263219.4 8.7 11.3 12.9614.26 212615.2 7.9 10.2 13.6715.03 172113.0 6.4 8.6 17.8419.62 162012.8 5.1 6.9 DCR Irms Testing Irms testing was performed on a 0.060″ thick pcb with 4 oz. copper traces optimized to minimize additional temperature rise. Temperature rise is highly dependent on many factors including pcb land pattern, trace size, and proximity to other components. Therefore temperature rise should be verified in application conditions. 1. When ordering, please specify testing code: AE541PYA682MSZ Testing:Z =COTS H =Screening per Coilcraft CP-SA-10001 N =Screening per Coilcraft CP-SA-10004 2. Inductance tested at 100 kHz, 0.1 Vrms using an Agilent/HP 4192A. 3. DCR measured on a micro-ohmmeter. 4. SRF measured using an Agilent/HP 4395A or equivalent. 5. Typical dc current at which the inductance drops 30% from its value without current. 6. Typical current that causes the specified temperature rise from 25°C ambient. 7. Electrical specifications at 25°C. Refer to Doc 362 “Soldering Surface Mount Components” before soldering. Document AE856-1 Revised 01/08/13 ® © Coilcraft, Inc. 2013 1102 Silver Lake Road Cary, IL 60013 Phone 800-981-0363 Fax 847-639-1508 Email [email protected] www.coilcraft-cps.com This product may not be used in medical or high risk applications without prior Coilcraft approval. Specifications subject to change without notice. Please check our web site for latest information. 7070 POWER INDUCTORS AE541PYA Series (7070) Inductance (µH) 0.24 0.20 0.16 0.16 µH 0.12 0.08 0.04 0 0 10 20 30 40 50 Current (A) 60 70 80 90 Inductance (µH) 0.5 0.4 0.30 µH 0.3 0.2 0.1 0.8 0.7 0.6 0.5 0.4 0.3 0.2 0.1 0 0 10 20 30 Current (A) 40 50 60 Inductance (µH) 0 0.55 µH 0 5 10 15 20 25 30 Current (A) 35 40 45 50 1.0 Inductance (µH) Inductance (µH) Inductance (µH) Inductance (µH) Inductance (µH) L vs Current 0.8 0.6 0.65 µH 0.4 0.2 0 0 5 10 15 20 25 30 Current (A) 35 40 45 50 1.2 1.0 0.80 µH 0.8 0.6 0.4 0.2 0 0 5 10 20 25 Current (A) 30 35 40 45 1.6 1.2 0.8 1.0 µH 0.4 0 0 4 8 12 16 20 24 28 32 36 40 24 28 32 36 40 Current (A) 2.0 1.6 1.2 1.2 µH 0.8 0.4 0 0 4 8 12 16 20 Current (A) 2.4 2.0 1.6 1.8 µH 1.2 0.8 0.4 0 0 5 10 15 Current (A) 20 25 30 Document AE856-2 Revised 01/08/13 ® © Coilcraft, Inc. 2013 15 1102 Silver Lake Road Cary, IL 60013 Phone 800-981-0363 Fax 847-639-1508 Email [email protected] www.coilcraft-cps.com This product may not be used in medical or high risk applications without prior Coilcraft approval. Specifications subject to change without notice. Please check our web site for latest information. 7070 POWER INDUCTORS AE541PYA Series (7070) Inductance (µH) Inductance (µH) 3.0 2.4 1.8 2.2 µH 1.2 0.6 0 0 5 10 15 20 Current (A) 25 5.0 Inductance (µH) Inductance (µH) Inductance (µH) L vs Current 4.0 3.3 µH 3.0 2.0 1.0 0 0 5 10 15 20 Current (A) 25 8 6 5.6 µH 4 2 0 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 9 10 11 12 13 14 15 Current (A) 10 8 6 6.8 µH 4 2 0 0 1 2 3 4 5 6 7 8 Current (A) 8 6 4.7 µH 4 2 0 0 2 4 6 8 10 12 Current (A) 14 16 18 20 Document AE856-3 Revised 01/08/13 ® © Coilcraft, Inc. 2013 1102 Silver Lake Road Cary, IL 60013 Phone 800-981-0363 Fax 847-639-1508 Email [email protected] www.coilcraft-cps.com This product may not be used in medical or high risk applications without prior Coilcraft approval. Specifications subject to change without notice. Please check our web site for latest information. 7070 POWER INDUCTORS AE541PYA Series (7070) Typical L vs Frequency 0.283 ±0.020 7,2 ±0,5 Inductance (µH) 10 6.8 µH 4.7 µH 0.295 ±0.020 7,5 ±0,5 2.2 µH 1.8 µH 1.2 µH 1.0 µH 1 0.80 µH 0.65 µH 0.276 max 7,0 0.30 µH 0.1 0.1 100 1 Frequency (MHz) Dash number -161 -301 -551 -651 -801 -102 -122 -182 -222 -332 -472 -562 -682 A ±0.008 in ±0,20 mm (in / mm) 0.257 / 6.53 0.257 / 6.53 0.257 / 6.53 0.257 / 6.53 0.257 / 6.53 0.249 / 6.33 0.249 / 6.33 0.241 / 6.13 0.234 / 5.93 0.234 / 5.93 0.226 / 5.73 0.226 / 5.73 0.226 / 5.73 0.180 4,57 0.057 ±0.004 1,45 ±0,10 Irms Derating B (in / mm) 0.281 / 7.13 0.281 / 7.13 0.281 / 7.13 0.281 / 7.13 0.281 / 7.13 0.269 / 6.83 0.269 / 6.83 0.257 / 6.53 0.245 / 6.23 0.245 / 6.23 0.234 / 5.93 0.234 / 5.93 0.234 / 5.93 A (see table) B (see table) 120 110 0.123 ±0.010 3,12 ±0,25 90 80 70 Dimensions are in 60 inches mm 0.064 1,63 Suggested Land Pattern 50 40 25°C Percent of rated Irms 100 30 20 10 0 -55 -40 -20 0 20 40 60 80 100 120 140 160 Ambient temperature (°C) Document AE856-4 Revised 01/08/13 ® © Coilcraft, Inc. 2013 1102 Silver Lake Road Cary, IL 60013 Phone 800-981-0363 Fax 847-639-1508 Email [email protected] www.coilcraft-cps.com This product may not be used in medical or high risk applications without prior Coilcraft approval. Specifications subject to change without notice. Please check our web site for latest information.