PONA 2100 Series DATASHEET | JANUARY 2012 FIBER OPTICS PONA 2100 Series Erbium Doped Fiber Amplifier Applications High Performance Supertrunking Links High Power Distribution Networks Redundanct Ring Architectures FTTx Networks. Features The EMCORE PONA 2100 Series Erbium Doped Fiber Amplifier (EDFA) is an ideal building block for OEM system integrators. The family of PONA 2100 series EDFA’s is designed to meet the most demanding noise performance requirements of CATV applications, and performs all the functions required of an optical amplifier for system integration. PONA 2100 series EDFA’s provide optical isolation on the input and output of the gain block for stable, low noise operation. The input and output optical signal power levels are detected for monitoring and control. The input optical signal is amplified with active gain control for a constant output power level, or with active output power control for constant gain mode. The PONA 2100 series EDFA’s also provide monitors and associated alarms for all vital characteristics. The optical output of the PONA 2100 series EDFA’s can be split into multiple ports by an optional external splitter. Full Functionality 1 RU EDFA Low Noise Figure (Typ < 5.5 dB) Total Input Power Range: -10 dBm to +12 dBM +14 dBm to +30 dBm Output Power Optional Internal Optical Power Splitters Standard RS-232 Communications Standard SNMP Communication (coming soon) General and Mechanical Specifications Property Operating Wavelength Requirement 1532 ~ 1565 nm 1545 ~ 1565 nm Comments PONA 2114 – PONA2127 PONA 2130 Standard Operating Case Temperature -10C to 55C Storage Temperature -40C to 85C Standard 20% to 85% 100 VAC to 240 VAC 50/60 Hz -36 to –60 V DC SC/APC; SC/UPC; FC/APC; FC/UPC; E2000/APC Non-condensing Standard Optional 19.0”W x 14.76”D x 1.72”H 19” Rack Mounted, 1U Operating Humidity Voltage Supply Range Key Lock Switch Optical Connectors Standard and Optional Gain Flatness (1530 nm – 1562 nm) Dimensions in Inches User Specified VFD Panel Status Indicator Low Electrical Power Consumption Input/Output Isolation >40/40 dB Polarization Dependant Gain < 0.1 dB Polarization Mode Dispersion < 0.5 ps | REV 2012.01 Information contained herein is deemed reliable and accurate as of the issue date. EMCORE reserves the right to change the design or specification at any time without notice. PONA 2100 Series FIBER OPTICS DATASHEET | JANUARY 2012 Optical/Electrical Characteristics1 Property Symbol (Units) Limit PONA Models Comments 2114 2117 2120 2122 2124 2127 2130 Operating Input Power Pin (dBm) Max +12 +12 +12 +12 +12 +12 +12 Operating Input Power Pin (dBm) Min -10 -10 -10 -10 -10 -10 -10 Output Power Po (dBm) 14.0 17.0 20.0 22.0 24.0 27.0 30.0 +/-.25 +/- .25 +/- .25 +/- .25 +/- .25 +/- .25 +/- .25 Noise Figure NF (dB) Typ/Ma x 4.5/5.0 4.5/5.0 4.5/5.0 4.5/5.0 5.0/5.5 5.0/5.5 5.5/6.0 (Notes 3, 8) Static Gain Flatness GF (dB) Max +/-0.5 +/-0.5 +/-0.5 +/-0.5 +/-0.5 +/-0.5 (Note 7) (Note 4) Typical (May vary for some models) (Note 2) Dynamic Gain Flatness (dB) Max +/-1 +/-1.25 +/-1.5 +/-2.0 +/-2.0 +/-2.0 (Note 7) (Notes 5, 8) Output Power Stability (dB) Max +/- 0.2 +/- 0.2 +/- 0.2 +/- 0.2 +/- 0.2 +/- 0.2 +/- 0.2 (Note 6) Power Consumption (steady state regime) Psys (W) Max 5 7 9 12 20 35 40 50 C Case o Notes: 1. Unless stated otherwise, all specifications apply over the full operating temperature and humidity ranges 2. Measurement variations 3. Measured with 8 evenly spread input optical signals @ 25°C, Pin ≈ 0 dBm (Measuring with 1 input optical signal with Pin ≈ 0 dBm and ≈ 1550 nm is also possible. (Low Noise Figure options with NF ≤ 4.0/4.5 dB are available for some models) 4. Measured with a swept Probe Signal (Pp), where Pp ≈ 0 dBm @ 25C 5. Measured with a swept Probe Signal (Pp), and a fixed Tone Signal (Pt) @ ~ 1550 nm; (Pt ≈ Pp+20 dB; Pt + Pp ≈ 0 dBm) @ 25C; Gain Flattened Options with ΔG ≤ +/-1.0dB are available (for some models) 6. Over polarization and temperature 7. Static and Dynamic Gain Flatness for PONA 2130 can be defined for 1545 nm ≤ ≤1562 nm and by special request only. 8. Specific NF and ΔG can be guaranteed at a single specified Input Optical Power Level (Pin = Pt + Pp) equal or different from 0 dBm. (Please contact your Sales Representative for more information) | REV 2012.01 Information contained herein is deemed reliable and accurate as of the issue date. EMCORE reserves the right to change the design or specification at any time without notice. PONA 2100 Series FIBER OPTICS DATASHEET | JANUARY 2012 Outline Drawing AC versions shown below with 8-port option DC versions shown below with 8-port option Compliance Information 89/336/EEC 73/23/EEC EN 50083-2, (2001) EN 55013 EN 61000-3-2 EN 55020 EN 61000-4-6 EN 61000-4-3 EN 61000-4-2 EN 61000-4-4 EN 60950 EN 60825-1 EN 60825-2 CDRH Fit Rate: Electromagnetic Compatibility Directive, amended by 92/31/EEC & 93/68/EEC Low Voltage Directive, amended by 93/68/EEC Cable networks for TV signals, sounds and interactive services, Part 2 Electromagnetic Compatibility for equipment. Mains Conducted Emissions Mains Frequency and its Harmonics, Conducted Emissions Radiation from Active Equipment, Radiated Immunity Immunity of Active Equipment, Radiated Immunity Immunity of Active Equipment, Radiated Immunity Electrostatic Discharge Immunity Electrical Fast Transient / Burst Immunity Low Voltage Directives Laser Safety Requirement Laser Safety Requirement Laser Safety Requirement 90% level of confidence < 1700 @ 30C (PONA 2130) | REV 2012.01 Information contained herein is deemed reliable and accurate as of the issue date. EMCORE reserves the right to change the design or specification at any time without notice. PONA 2100 Series FIBER OPTICS DATASHEET | JANUARY 2012 Ordering Information PONA 21 - - - - * Optical Output Power Output Ports 14 - 14 dBm 1 17 - 17 dBm 2 DC – 48 V FC - FC/APC (Default Option) 01 – Gain Flattened Option 20 - 20 dBm 4 2DC – Redundant 48 V EC - E2000/APC 02 - Low NF Option 22 - 22 dBm 8 TC - SC/UPC 03 – Gain Flattened AND Low GC - FC/UPC NF Option 24 - 24 dBm 16 Input Voltage AC – 90-260V 50/60 Hz Connector SC – SC/APC (Default Option) GFF/ NF Options 00 - Standard 27 - 27 dBm 30 - 30 dBm Notes: 1. For ordering PONA preamplifiers please contact your Sales Representative 2. Only some models can be order with Gain Flattened and/or Low NF options. (-01, -02, and –03 suffixes). Please contact your Emcore Sales Representative for details Laser Safety Information This product meets the applicable requirements of 21 CFR 1010 & 1040 and is classified as a Class IV laser product based on the maximum optical output power shown below. During use as intended, the laser energy is fully contained within the fiber network such that there is no accessible laser radiation and would meet the requirements for a Class I laser product. The laser product report has been submitted to the CDRH and the accession number is expected by October 2006. Wavelength = 1530 ~ 1561 nm (dependant on input source) Maximum Output Power = 1.0 W (single output, 30 dBm model) | REV 2012.01 Information contained herein is deemed reliable and accurate as of the issue date. EMCORE reserves the right to change the design or specification at any time without notice.