Medallion 7200 Series CATV Fiber Amplifier Erbium/Ytterbium Doped Fiber Amplifier (EYDFA) DATASHEET | SEPTEMBER 2014 FIBER OPTICS The Medallion 7200 series product line is a family of state-of-the-art high performance CATV Erbium/Ytterbium Doped Fiber Amplifiers (EYDFA). Packaged in a convenient 2 RU housing, this line of fiber amplifiers has been optimized for superior output power stability and the exceptionally low noise figures demanded by CATV applications. Applications CATV Supertrunking High Power Distribution Networks Redundant Ring Architectures FTTx Networks Features High Saturation Output Power up to 38 dBm (Pre-Splitter) Dual Power Supplies, Redundant & Hot Swappable – AC or DC Front Panel Optical Input & Output Monitor Ports The Medallion 7200 provides very stable optical outputs over a wide operating temperature range. Internally it is supported with input and output isolators for enhanced system stability and performance. Optical power is continuously monitored at the input and output for automatic power control during operation over a wide operating temperature range. The Medallion 7200 offers a full range of flexible configurations and a rich set of features. These include remote management capability through SNMPv2, Telnet and a resident Web Server. The Medallion 7200 also supports MIBs specified by SCTE (Society of Cable Television Engineers) for this product class. For local management, an RS-232 port is standard, along with a convenient front panel control menu provided on a Vacuum Fluorescent Display (VFD). High Level Features Automatic Power Control and/or Automatic Gain Control Modes SNMPv2 Control Interface Port Count, Optical Power, and Connector Style Options Web Server Integrated per Channel WDM for FTTx PON Applications 10/100bT Low Noise Figure for CATV Monitors & Alarms Wide Input Dynamic Range Very Stable Output Power Over a Wide Operating Temperature Range Loss of Input Power Loss of Output Power Redundant Power Supplies Pump Laser Diodes Bias Current Redundant Fans Pump Laser Diodes Temperature Case Temperature REV 2014.09 Information contained herein is deemed reliable and accurate as of the issue date. EMCORE reserves the right to change the design or specification at any time without notice. Medallion 7200 Series CATV Fiber Amplifier Erbium/Ytterbium Doped Fiber Amplifier (EYDFA) FIBER OPTICS DATASHEET | SEPTEMBER 2014 Electrical Characteristics Property Symbol Min AC Power Supply Voltage VAC 85 DC Power Supply Voltage VDC -36 Power Consumption Note 1 Typ Max Unit 265 VAC -72 VDC 80 W -48 PTOT Note 1: 80 W valid at 0 dBm input power and 38 dBm output power within specified operating temperature range. Optical Characteristics Property Symbol Min Typ Max Wavelength Range OP 1545 1550 1562 nm Input Power PIN -10 0 12 dBm POUT 30 38 dBm POUT -0.5 0.5 dB - 1 64 Total Ouput Power Options Note 1 Output Power Delta to Nominal Output Port Count Options (SC) Noise Figure Note 2 Notes 1,3 Note 4 NF Unit 6.0 dB Optical Isolation ISO 30 dB Input Power Alarm LOS -12 -11 -10 Input Monitor Loss IMON 22.5 23.5 24.5 dB Output Monitor Loss OMON 22 23 24 dB dBm Note 1: Pre-splitter total output power. Number of Ports vary by model type. Note 2: Valid for 1-20 ports. 32 ports and 64 ports have larger deltas. Note 3: Model Types are specified by output power per port. Output power per port is limited to 21 dBm Note 4: Test condition with input power = 0 dBm (@ 1550 nm) Note 5: Specifications valid within operating temperature range. Absolute Maximum Ratings Property Operating Temperature Range Symbol Min TO 0 Typ Max Unit 50 o C Storage temperature Range TS -40 85 o Relative Humidity H 0 95 % C | REV 2014.09 Information contained herein is deemed reliable and accurate as of the issue date. EMCORE reserves the right to change the design or specification at any time without notice. Medallion 7200 Series CATV Fiber Amplifier Erbium/Ytterbium Doped Fiber Amplifier (EYDFA) DATASHEET | SEPTEMBER 2014 FIBER OPTICS Outline Drawing | REV 2014.09 Information contained herein is deemed reliable and accurate as of the issue date. EMCORE reserves the right to change the design or specification at any time without notice. Medallion 7200 Series CATV Fiber Amplifier Erbium/Ytterbium Doped Fiber Amplifier (EYDFA) FIBER OPTICS DATASHEET | SEPTEMBER 2014 European Union “RoHS Directive” Compliance Except for the exemption claimed herein for lead used in solder for network infrastructure equipment, all homogenous materials contained in the product contain less than the maximum concentration levels for lead, mercury, cadmium, hexavalent chromium, polybrominated biphenyls and polybrominated biphenyl ethers permitted under the European Union Directive 2002/95/EC (the "RoHS Directive"). Model Number Information □□-□□□□-□□□□□ 7200Logo & Customer Specific Integrated WDM Output Power per Port Number of Ports 0= EMCORE Logo 0 = Integrated WDM XX = xx dBm/port (Maximum: xx=21 dBm) 01 = 1 port 02 = 2 ports 04 = 4 ports 08 = 8 ports 16 = 16 ports 20 = 20 ports 32 = 32 ports 64 = 64 ports 1=No Logo 1 = No Integrated WDM Optics Optical Input Optical Output Optical Monitor Power Supply 1 = SC/APC 1 = Front 1= Front 1= Front 1= AC primary, no secondary 2 = FC/APC 2 = Rear 2= Rear 2= Rear 2=DC primary, no secondary 3 = None 3=AC primary, AC secondary 3 = E2000 4 = SC/APC Angled 4=AC primary, DC secondary 5= FC/APC Angled 5=DC primary, DC secondary 6= E2000 Angled Note 1: Not all configurations are available; please contact your EMCORE Sales Representative. e.g. 7200-00-1632-11135 (EYDFA, EMCORE Logo, with Integrated WDM, 32 Ports, 16 dBm/Port, SC/APC, Front Input/Output, No Optical Monitors, Dual DC) e.g. 7200-11-1764-11133 (EYDFA, No EMCORE Logo, 64 Ports, 17 dBm/Port, SC/APC, Front Input/Output, No Optical Monitors, Dual AC) | REV 2014.09 Information contained herein is deemed reliable and accurate as of the issue date. EMCORE reserves the right to change the design or specification at any time without notice. Medallion 7200 Series CATV Fiber Amplifier Erbium/Ytterbium Doped Fiber Amplifier (EYDFA) DATASHEET | SEPTEMBER 2014 FIBER OPTICS Laser Safety Information Class 1M Laser Products IEC 60825-1:2007 EN 60825-1:2007 Complies with 21 CRF 1040.10 and 1040.11 except for deviations pursuant to Laser Notice No. 50 dated June 24, 2007 Caution: Use of controls, adjustment and procedures other than those specified herein may result in hazardous laser radiation exposure. | REV 2014.09 Information contained herein is deemed reliable and accurate as of the issue date. EMCORE reserves the right to change the design or specification at any time without notice.