PE5501-KIT Type N, 18 GHz VNA Calibration Kit Product Features Broad VNA Coverage, including Agilent® & Anritsu® Open, Load, Fixed Broadband load configuration. DC to 18 GHz Stainless Steel Type N Description The PE5501-KIT Calibration Kit is designed for use with a broad range of vector network analyzers, using a Short-Open-Load calibration technique to perform a one-path, two port or a full two-port calibration. Calibration coefficients are included for configuring a network analyzer. Specifications (1) Parameter Impedance Frequency Connector Type Return Loss (2) Open ≤ 4 GHz (2) Open ≤ 18 GHz (2) Short ≤ 4 GHz (2) Short ≤ 18 GHz (2) Load ≤ 4 GHz (2) Load ≤ 18 GHz Phase Deviation (2) Open ≤ 4 GHz (2) Open ≤ 18 GHz (2) Short ≤ 4 GHz (2) Short ≤ 18 GHz Resistance, Load Power Handling, Load Units ohms GHz Value 50Ω 18 Type N dB dB dB dB dB dB ≤ 0.10 ≤ 0.20 ≤ 0.10 ≤ 0.15 ≥ 40 ≥ 30 degs. degs. degs. degs. Ohms Watts ≤ 1.5º ≤ 3.0º ≤ 1.2º ≤ 2.5º 50Ω ± 0.25Ω ≤ 0.5 Description Operates from DC to 18 GHz 0º to 50º C Ordering Information Part Number PE5501-KIT PE5501-1 PE5501-2 PE5501-3 PE5501-4 PE5501-5 PE5501-6 PE5011-7 (1) (2) Description N Type Standard Calibration Kit Items Included in Kit Open Circuit, Male (Plug) Open Circuit, Female (Jack) Short Circuit, Male (Plug) Short Circuit, Female (Jack) Broadband Load, Male (Plug) Broadband Load, Female (Jack) Type N Torque Wrench Pasternack reserves the right to change specifications or information without notice. Specifications are for both Male (Plug) and Female (Jack) components. 100412 Rev. 1 1 of 1