STPS60L30C-Y Automotive power Schottky rectifier Features A1 ■ Very small conduction losses ■ Negligible switching losses ■ Extremely fast switching ■ AEC-Q101 qualified K A2 Pin 10 K Description K 60 A dual center tab Schottky rectifier suitable for automotive applications. Pin 11 K Pin 1 A1 Packaged in PowerSO-20 (slug up), this device is especially intended for use in a low voltage applications. A2 Pin 20 K PowerSO-20 (slug up) STPS60L30CKY-TR Table 1. December 2010 Doc ID 18296 Rev 1 Device summary Symbol Value IF(AV) 2 x 30 A VRRM 30 V Tj(max) 150 °C VF(max) 0.415 V 1/7 www.st.com 7 Characteristics 1 STPS60L30C-Y Characteristics Table 2. Absolute rating (limiting value, per diode) Symbol Value Unit 30 V 45 A 30 60 A 250 A Storage temperature range -65 to +175 °C Tj Operating junction temperature range -40 to +150 °C TR Recommended reflow soldering temperature range 245 +0/-5 °C Value Unit 0.95 0.61 °C/W 0.27 °C/W VRRM Parameter Repetitive peak reverse voltage IF(RMS)(1) Forward rms current Tc = 130 °C, δ = 0.5 Per diode Square pulse Per device IF(AV)(1) Average forward current IFSM(1) Surge non repetitive forward current Tstg tp = 10 ms Sinusoidal 1. All anode pins (A1, A2) must be connected Table 3. Thermal parameters Symbol Parameter Rth(j-c) Junction to case Rth(c) Coupling Per diode Per device When diodes 1 and 2 are used simultaneously: ΔTj(diode 1) = P(diode1) x Rth(j-c)(Per diode) + P(diode 2) x Rth(c) Table 4. Symbol IR(1) VF(1) (2) Static electrical characteristics (per diode) Parameter Reverse leakage current Forward voltage drop Test conditions Tj = 25 °C Tj = 125 °C Min. Typ. VR = VRRM Unit 2 mA 400 mA Tj = 25 °C IF = 10 A 0.420 Tj = 125 °C IF = 10 A 0.310 Tj = 25 °C IF = 30 A 0.490 Tj = 125 °C IF = 30 A 0.415 1. Pulse test : tp = 380 µs, δ < 2% 2. All anode pins (A1, A2) must be connected To evaluate the maximum conduction losses use the following equation: P = 0.315 x IF(AV) + 0.00333 x IF2(RMS) 2/7 Max. Doc ID 18296 Rev 1 V STPS60L30C-Y Figure 1. 24 Characteristics Average forward power dissipation Figure 2. versus average forward current PF(AV)(W) 35 (per diode, all anode pins connected) 22 20 Average forward current versus ambient temperature per diode (δ = 0.5) IF(AV)(A) (per diode, all anode pins connected) δ=1 Rth(j-a) = Rth(j-c) 30 δ = 0.5 18 25 δ = 0.2 16 14 δ = 0.05 12 δ = 0.1 20 Rth(j-a) = 10 °C/W 15 10 8 10 6 T 4 5 2 IF(AV)(A) 0 0 5 Figure 3. 400 10 15 20 25 30 35 40 δ = tp / T 0 45 0 25 Non repetetive surge peak forward Figure 4. current versus overload duration (maximum values) IM(A) 1.0 50 75 100 125 150 Relative variation of thermal impedance, junction to case, versus pulse duration Zth(j-c)/Rth(j-c) (per diode, all anode pins connected) (per diode, all anode pins connected) 0.9 350 Tamb(°C) tp 0.8 300 0.7 250 0.6 Tc = 25 °C 0.5 200 Tc = 75 °C 0.4 150 0.2 IM 50 t δ = 0.5 0.1 t(s) 0 1.E-03 Figure 5. 1.E+03 Single pulse 0.3 Tc = 125 °C 100 1.E-02 1.E-01 1.E+00 0.0 1.E-05 Reverse leakage current versus Figure 6. reverse voltage applied (per diode) (typical values) IR(mA) 10.0 Tj = 150 °C tp(s) 1.E-04 1.E-03 1.E-02 1.E+00 1.E+01 Junction capacitance versus reverse voltage applied (per diode) (typical values) C(nF) F = 1 MHz Vosc = 30 mVRMS Tj = 25 °C Tj = 125 °C 1.E+02 1.E-01 Tj = 100 °C 1.E+01 Tj = 75 °C 1.0 Tj = 50 °C 1.E+00 Tj = 25 °C 1.E-01 VR(V) 1.E-02 0 5 10 15 20 25 30 VR(V) 0.1 1 Doc ID 18296 Rev 1 10 100 3/7 Characteristics Figure 7. STPS60L30C-Y Forward voltage drop versus forward current 60 50 40 IFM(A) (per diode, all anode pins connected) Tj = 125 °C (Maximum values) Tj = 125 °C (Typical values) 30 20 Tj = 25 °C (Maximum values) 10 V (V) FM 0 0.00 0.05 0.10 0.15 0.20 0.25 0.30 0.35 0.40 0.45 0.50 0.55 0.60 4/7 Doc ID 18296 Rev 1 STPS60L30C-Y Package information In order to meet environmental requirements, ST offers these devices in different grades of ECOPACK® packages, depending on their level of environmental compliance. ECOPACK® specifications, grade definitions and product status are available at: www.st.com. ECOPACK® is an ST trademark. Table 5. PowerSO-20 (slug up) dimensions Dimensions Ref Millimeter C ( C O P L A N A R IT Y ) - C - G 0 .3 5 S P SO 20D M E G a g e P la n e D E T A IL A Max. Min. 3.5 0.128 3.3 0.118 1 0.031 0.25 0.006 Typ. Max. 3.25 A2 3 A4 0.8 A5 0.15 a1 0.03 -0.04 0.0012 -0.0016 b 0.4 0.53 0.016 0.021 c 0.23 0.32 0.009 0.012 D(1) 15.8 16 0.622 0.63 D1 9.4 9.8 0.37 0.385 3.15 0.2 1 0.138 0.124 0.13 0.039 0.008 0.01 0.039 E 13.9 14.5 0.547 0.57 E1(1) 10.9 11.1 0.429 0.437 10 11 M Typ. Inch A D2 E1 D 2 (x 2 ) A2 A A5 D E T A IL A L E E2 E3 V R a1 c A4 S E A T IN G P L A N E Min. 2.9 0.114 D D1 e3 H e E2 E3 5.8 e 1.12 E2 h x 45° b N 1 20 e3 N 2 Package information 1.27 6.2 0.228 1.42 0.044 11.43 0.244 0.05 0.056 0.45 G 0 0.1 0 0.004 H 15.5 15.9 0.61 0.625 h L 1.1 0.8 1.1 N 0.043 0.031 0.043 10° R 10° 0.6 0.024 S 0° 8° 0° 8° V 5° 7° 5° 7° 1. These measurements do not include mold flash or protrusions. Mold flash or protrusions shall not exceed 0.15 mm (0.006”). Critical dimensions: E, a1, e, and G. Doc ID 18296 Rev 1 5/7 Ordering information 3 Ordering information Table 6. 4 Ordering information Order code Marking Package Weight Base qty Delivery mode STPS60L30CKY-TR PS60L30CY PowerSO-20 1.93 g 600 Tape and reel Revision history Table 7. 6/7 STPS60L30C-Y Document revision history Date Revision 02-Dec-2010 1 Changes First issue. Doc ID 18296 Rev 1 STPS60L30C-Y Please Read Carefully: Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries (“ST”) reserve the right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any time, without notice. All ST products are sold pursuant to ST’s terms and conditions of sale. Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no liability whatsoever relating to the choice, selection or use of the ST products and services described herein. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such third party products or services or any intellectual property contained therein. UNLESS OTHERWISE SET FORTH IN ST’S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. UNLESS EXPRESSLY APPROVED IN WRITING BY AN AUTHORIZED ST REPRESENTATIVE, ST PRODUCTS ARE NOT RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY, DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS "AUTOMOTIVE GRADE" MAY ONLY BE USED IN AUTOMOTIVE APPLICATIONS AT USER’S OWN RISK. Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any liability of ST. ST and the ST logo are trademarks or registered trademarks of ST in various countries. Information in this document supersedes and replaces all information previously supplied. The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners. © 2010 STMicroelectronics - All rights reserved STMicroelectronics group of companies Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan Malaysia - Malta - Morocco - Philippines - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America www.st.com Doc ID 18296 Rev 1 7/7