UTC-IC 2SD1628

UNISONIC TECHNOLOGIES CO., LTD
2SD1628
Preliminary
NPN SILICON TRANSISTOR
HIGH-CURRENT SWITCHING
APPLICATIONS
„
FEATURES
* Low saturation voltage.
* High hFE.
* Large current capacity.
1
SOT-89
Lead-free:
2SD1628L
Halogen-free: 2SD1628G
„
ORDERING INFORMATION
Normal
2SD1628-x-AB3-R
Ordering Number
Lead Free Plating
2SD1628L-x-AB3-R
Halogen Free
2SD1628G-x-AB3-R
www.unisonic.com.tw
Copyright © 2009 Unisonic Technologies Co.,
Package
SOT-89
Pin Assignment
1
2
3
B
C
E
Packing
Tape Reel
1of 3
QW-R208-045.a
2SD1628
„
Preliminary
NPN SILICON TRANSISTOR
ABSOLUATE MAXIUM RATINGS (Ta = 25°C)
PARAMETER
Collector-Base Voltage
Collector-Emitter Voltage
Emitter-Base Voltage
SYMBOL
RATINGS
UNIT
VCBO
60
V
VCEO
20
V
VEBO
6
V
DC
IC
5
A
Collector Current
Pulse
ICP
8
A
Collector Dissipation
PC
0.5
W
Junction Temperature
TJ
150
°C
Storage Temperature
TSTG
-55~+150
°C
Note: Absolute maximum ratings are those values beyond which the device could be permanently damaged.
Absolute maximum ratings are stress ratings only and functional device operation is not implied.
„
ELECTRICAL CHARACTERISTICS (Ta= 25°C, unless otherwise specified)
PARAMETER
Collector-Emitter Saturation Voltage
Base-Emitter Saturation Voltage
Collector Cut-Off Current
Emitter Cut-Off Current
SYMBOL
VCE(SAT)
VBE(SAT)
ICBO
IEBO
Output Capacitance
hFE1
hFE2
Cob
Transition Frequency
fT
Turn On Time
Storage Time
Fall Time
tON
tS
tF
DC Current Gain
■
TEST CONDITIONS
IC =3A, IB =60mA
IC =3A, IB =60mA
VCB =50V, IE =0
VEB =5V, IC =0
VCE =2V, IC =0.5A
VCE =2V, IC =3A
VCB =10V, f =1MHz
VCE =10V, IC =50mA
See specified Test circuit
MIN
120
95
TYP MAX UNIT
500 mV
1.5
V
100
nA
100
nA
560
45
120
30
300
40
pF
MHz
ns
ns
ns
CLASSIFICATION OF hFE1
RANK
RANGE
E
120 ~ 200
UNISONIC TECHNOLOGIES CO., LTD
www.unisonic.com.tw
F
160 ~ 320
G
280 ~ 560
2 of 3
QW-R208-045.a
2SD1628
■
Preliminary
NPN SILICON TRANSISTOR
SWITCHING TIME TEST CIRCUIT
IB1
OUTPUT
INPUT
1
IB2
PW=10μS
Duty=2%
tR, tF≤7ms
5
200VR
50
1μ
-5V
10IB1= -10IB2=IC=2A
1μ
10V
Unit (Resistance:Ω, Capacitance:F )
UTC assumes no responsibility for equipment failures that result from using products at values that
exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or
other parameters) listed in products specifications of any and all UTC products described or contained
herein. UTC products are not designed for use in life support appliances, devices or systems where
malfunction of these products can be reasonably expected to result in personal injury. Reproduction in
whole or in part is prohibited without the prior written consent of the copyright owner. The information
presented in this document does not form part of any quotation or contract, is believed to be accurate
and reliable and may be changed without notice.
UNISONIC TECHNOLOGIES CO., LTD
www.unisonic.com.tw
3 of 3
QW-R208-045.a