AMPMODU Interconnection System AMPMODU .025 [0.64] Square Interconnection System AMPMODU Headers and Receptacles, .100 [2.54] Centerline 87605-1 Bulkhead Header 6-534237-8 SR Top Entry 6-535541-0 SR Top Entry 87220-8 SR VT 6-146281-0 SR VT BA 87227-5 DR VT 6-146257-0 DR VT BA 7-146268-5 DR VT-RET BA 6-146490-5 DR Stacking Header 6-534206-0 DR Top Entry 102699-4 DR AP 5-103166-3 DR RA 6-146293-0 SR VT-RET BA 103336-5 SR AP 103577-3 87232-9 SR RA AMPMODU Interconnection System 87230-6 DR RA 5-103168-3 DR VT 103542-9 DR AP 5-103164-3 3/4 DR RA 5535512-1 DR HORZ 5-146427-5 Legend: DR RA-RET BA SR Single Row 5535676-9 DR Double Row SR HORZ VT Vertical RA Right Angle RET Retention Feature AP ACTION PIN BE Bottom Entry 3/4 3-Sided-Shrouded Header BA Breakaway TR Triple Row SMT Surface Mount HORZ Horizontal DE Dual Entry 534267-1 DR Outrigger DE 6-146306-0 SR RA-RET BA 6-146308-0 DR RA BA 5-103414-8 SR VT 5-102203-7 SR RA 5 6-534998-3 DR Top Entry 5-146304-6 SR RA 5-87879-7 SR Bottom Entry For drawings, technical data or samples, contact your Tyco Electronics sales engineer or call the Tyco Electronics Product Information Center: 1-800-522-6752 Note: All part numbers are RoHS compliant. 85 Catalog 1307819 Revised 8-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 AMPMODU Interconnection System AMPMODU .025 [0.64] Square Interconnection System (Continued) AMPMODU Headers and Receptacles, .100 [2.54] Centerline 5-146134-9 DR VT SMT 5-146132-4 SR VT SMT 6-146474-0 SR Stacking Header 5-147720-9 SR Outrigger DE 5-535542-3 DR DE 5147722-9 SR HOR2 SMT AMPMODU Interconnection System 5-103817-2 TR VT 1-147070-1 .045 Sq. Continuous Post 5-147738-5 SR VT SMT DE 1-147333-1 .025 Sq. Continuous Post Legend: SR Single Row DR Double Row VT Vertical RA Right Angle RET Retention Feature AP ACTION PIN BE Bottom Entry 3/4 3-Sided-Shrouded Header BA Breakaway TR Triple Row SMT Surface Mount HORZ Horizontal DE Dual Entry 5 6-147105-0 DR VT SMT DE 5147721-4 SR HORZ SMT For drawings, technical data or samples, contact your Tyco Electronics sales engineer or call the Tyco Electronics Product Information Center: 1-800-522-6752 Note: All part numbers are RoHS compliant. 86 Catalog 1307819 Revised 8-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 AMPMODU Interconnection System AMPMODU .025 [0.64] Square Interconnection System The AMPMODU interconnection system provides interconnections with a unique modular concept, utilizing precision formed receptacle contacts and mating posts. Mating of the post and receptacle contacts of this system is very tolerant. This is made possible by a post with a burr-free lead-in and a receptacle contact featuring double cantilever beams and antioverstress stops. Machine applied terminations, through matched application equipment, are geared for virtually any production volume requirement, for the lowest possible applied cost. AMPMODU mating posts are supplied typically as headers. They are available in various populations to meet the interconnection and packaging requirements of most systems. However, in instances where packaging configurations do not lend themselves to the economies of headers, Tyco Electronics can provide application equipment for the discrete location of individual posts. Looking at the electronic industry's standard “levels of packaging,” the AMPMODU .025 [0.64] square interconnection system is primarily used in levels three and four. In level three it is used as a connection between two or more printed circuits. A mother/daughter board connection is typical. In level four it is used as a connection between two subassemblies, such as a power supply and an associated subassembly. It is also important to note this product can serve as an interconnection in more than one level, depending on the application. The .025 [0.64] square interconnection system offers the most complete line of post/receptacle packaging products available today. This system, rated at 3 amperes per contact, has been used by almost every industry and marketplace over the last decade and is one of the oldest, most versatile and reliable interconnection systems employing .025 [0.64] square packaging technology. AMPMODU .025 Square Interconnection System AMPMODU receptacle contacts and posts categorically fall into three general classifications of products, which include: board mounted posts and receptacle assemblies, post headers and wire-applied contact housings for crimp snap-in pin and receptacle contacts. Board mounted receptacle assemblies are available in various geometries, offering packaging interconnections that include perpendicular, parallel and stacking capabilities. Crimp snap-in pins for 26-22 AWG [0.12-0.4 mm2] wire and crimp snap-in receptacles for 32-20 AWG [0.03-0.6 mm2] wire provide excellent discrete wire terminations. Housings for these contacts provide ease of handling terminations in high density applications. Terms Explained Receptacle Contacts The AMPMODU receptacle cross-section is primarily rectangular, with rounded corners. Two integral cantilever beams contact the mating square or round male posts. Deflection of these spring members is limited by anti-overstress stops, and excessive permanent deformation is prevented. This feature allows a wide range for tolerance of misalignment of mating contacts. The configuration of the receptacle completely encloses the spring members preventing damage during handling and assembly and makes the system compatible with automatic application techniques. Note: Application of a contact lubricant is part of the manufacturing process of all AMPMODU tin-plated crimp products. However, it is not part of the manufacturing process of products that customers will solder, then clean. For these products, Tyco Electronics recommends that customers use contact lubricant. See the Tyco Electronics web page for further information. Insulation Support Barrel Rugged—selfsupporting one-piece contact body Wire Crimp Barrel 5 Wire entry for post to receptacle misalignment Reliability—dual cantilever spring contact design and built-in anti-overstress Offers standard, intermediate and high pressure contact forces Cantilever Beams Wide Misalignment Tolerance Anti-overstress Receptacle-Closed Entry Housing Design Contact edges enclosed in plastic The closed entry housing style better eliminates the chance of a mating post stubbing on the edges of the receptacle contact. Closed Entry Metallic post stop Contact edges enclosed in plastic Access Way 87 Catalog 1307819 Revised 8-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 AMPMODU Interconnection System Wire-to-Board, .100 [2.54] Centerline Products Wire Sizes Contact Platings Wire-to-Board Products Mating Post Lengths Wire Size AWG [mm2] 20 0.5-0.6 22-30 0.3-0.05 32 0.03 Platings .000015 [0.00038] Gold .000030 [0.00076] Gold .000050 [0.00127] Gold Tin Post Lengths .210-.283 [5.33-7.19] .205-.283 [5.21-7.19] .185-.283 [4.70-7.19] .256-.323 [6.50-8.20] .251-.323 [6.38-8.20] .231-.323 [5.87-8.20] .222-.273 [5.64-6.93] .200-.273 [5.08-6.93] .200-.250 [5.08-6.35] .169-.259 [4.29-6.58] .273-.350 [6.93-8.89] .200-.277 [5.08-7.04] Product Family Locking Clip, Mod. IV, IV.v, V, MT, Short Point Locking Clip, Mod. IV, IV.v, V, MTE, MT, Short Point Mod. IV, IV.v, V, Short Point Product Family Mod. IV, IV.v, V, MTE, MT, Short Point Locking Clip, Mod. IV, IV.v, V, MTE, MT, Short Point Locking Clip, Mod. IV, IV.v, V, MT Locking Clip, Mod. IV, IV.v, V, MTE, MT, Short Point Product Family Mod. IV (.600 [15.24] Profile Height) Mod. IV.v (.600 [15.24] Profile Height) Mod. V (.600 [15.24] Profile Height) Mod. IV (.645 [16.38] Profile Height) Mod. IV.v (.645 [16.38] Profile Height) Mod. V (.645 [16.38] Profile Height) MT Assembly with Standard Pressure Contacts MT Assembly with High Pressure Contacts MTE Assembly Short Point Connector Assembly Locking Clip (Connector Assembly) Locking Clip (Single Contact) 5 Application Tooling Application Tooling Description Manual Hand Tools (Wire Crimp) Manual Hand Tools (IDC) AMP-O-MATIC Stripper/Crimper Machines with Applicator CHAMPOMATOR Model 2.5 Machine CHAMPOMATOR Model 3A Machine AMP-O-LECTRIC Machines with Applicator Pneumatic Hand Tools IDC Electric Power Unit Tube-Fed Ribbon Cable Machine AMPOMATOR CLS Machines Discrete Wire Machine Manual Arbor Tool Pneumatic Arbor Tool Mod. IV, IV.v, V MT • Product Family Locking Short MTE Clip Point • • • • • • Level V • • • • • • • • • • • • • • • • • • • • • • • • • • 88 Catalog 1307819 Revised 8-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 AMPMODU Interconnection System Board-to-Board Solutions Guide, .100 [2.54] Centerline Products Problem or Concern Tyco Electronics' Potential Solution Headers Float Off Board Soldering Operation HEADERS Retention Feature: Unshrouded Shrouded Header Contacts Damaged During Manufacturing Operation or In-Field Use Shrouded HEADERS: Standard Profile Board/Backplane Requires High Temperature SurfaceMount Compatibility Application Requires Board Guidance, Polarization and/or Blind-Mate Capability Reduction in Parallel Board-to-Board Stack Height Necessary (Refer to Parallel Stack Guide on Page 62.) Application Requires Connectors to be End-to-End Stackable on .100 [2.54] Grid Single-Row Right-Angle Headers, Horizontal Receptacles (Page Ref.) Double-Row Vertical Headers and Receptacles (Page Ref.) Double-Row Right-Angle Headers, Horizontal Receptacles (Page Ref.) 102 — 103 — 198 104, 199 199 105, 200 115 116 117-121 122-128 — — 147 148, 149, 199 — — 103* — 104* 130*, 137* 105* 138* — 196* 195* — 172 110 189-192 — 173 — — 198, 199 196* 200 195* — — 179, 180* — — — — — — — — — — — 182-184 189-192 — — — 182 — 94, 95, 103* 103* — 96, 97, 104* 104* 110* 98. 99. 105 108* — 169* 172 176, 179, 180*, 182*, 183, 184 191, 192 170 173 Press-Fit ACTION PIN POST HEADERS: Unshrouded 146 Shrouded — Machine Applied 163, 164 Posts Surface-Mount Compatible Thru-Hole: HEADERS: Unshrouded 102* Shrouded — (Low Profile) RECEPTACLES — Surface-Mount: HEADERS 109* RECEPTACLES 187, 188 Two-Piece Family: w/Guide Posts: HEADERS — RECEPTACLES — Mod IV Low Profile RECEPTACLES: TOP ENTRY: Thru-Hole 178 Surface-Mount — BOTTOM ENTRY: Thru-Hole 177 Surface-Mount — DUAL ENTRY Thru-Hole 181 Surface Mount 187, 188 RECEPTACLES: Bottom Entry Outrigger 181 (Separate Holes for Receptacle Leads and Mating Leads) End-to-End Stackable: HEADERS (Unshrouded): Thru-Hole 93, 102 Thru-Hole* 102* Surface-Mount 109* RECEPTACLES: Thru-Hole 175, 177, 178, 181 Surface Mount 188 .100 [2.54] Centerline Products Soldering Problems with Thru-Hole Bottom Entry Receptacles (Must Mask Post Holes in Board During Soldering Operation) Single-Row Vertical Headers and Receptacles (Page Ref.) *High temperature compatible version, refer to page ref. listed. 5 Wire-to-Board Solutions Guide, .100 [2.54] Centerline Products Customer Requirement Application Requires Guidance, Polarization Wire-to-Wire Application Wire-to-Wire Application (Latched) Wire-to-Wire Application (Through Panel) High Vibration and Shock Applications Printed Circuit Board Polarization Board Requires Surface Mount Capability Tyco Electronics' Potential Solution Mod IV Polarized Housing MTE Latched Receptacle and Header MT with Polarizing Covers Short Point Polarized Housing Mod IV Receptacle Contacts and Pins MTE Latched Receptacle and Shrouded Pin Assembly MTE Panel Mount Locking Clip Contacts and Housings MTE Header with PC Board Orientation Peg MTE Surface Mount Headers MTE High Temperature Compatible Headers Catalog Page(s) 220 230, 231, 244-250 256-258 224 211-213 230, 231, 236, 237 242 207-209 248, 249 251, 252 249, 250 Need to mate to AMP-LATCH Eject Headers Mod IV Ejection Housing 220 Need to Minimize Strain to Cable MT with Eject Covers Mod IV Housing with Strain Relief 256-259 218, 219 Locking Clip Contacts 207, 298 Application Requires Self-Retaining Contacts Header Secured to Board During/Prior to Soldering MTE Headers with Post Retention or Holddowns 244-250 Mate to Unshrouded Header with Retention Requirements Mod IV plain Housing with Mod V Contacts MTE with High Pressure Contacts 213, 214, 216 234, 235 Multiple Cables to be Common to One Header Right-Angle Cable Dress Application Requires Crimp Contacts and MTE Housings Housings and End-to-End and Side-to-Side Stackable Connector Must Mate to Post Lengths of .169 [4.29] Min. MTE Coupling Shroud, Double- or Single-Row 240, 241 MT with Hermaphroditic Covers 229, 256, 257, 259 Short Point Contacts 222 Short Point Double-Row Housing, MTE Plain Housing 223, 228, 229 Short Point Contacts 222 89 Catalog 1307819 Revised 8-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 AMPMODU Interconnection System Mating Post Selection Guide The following selection guide is provided to help in choosing a mating product after a receptacle, header or post has been selected. In some instances references are given on the catalog page to specific mating connectors. In other instances the reader is referred here to the selection guide for mating product recommendations. If your application requirement is not answered here, consult Tyco Electronics for further recommendations. Recommended Effective Mating Posts Lengths Minimum Maximum Mating Post Selection Guide Receptacle Type AMPMODU Mod II Horizontal Board Mount Receptacle, Single and Double Row, Short Point-of-Contact—pages 169, 170, 172, 173 AMPMODU Mod II Vertical Board Mount Receptacle, Single Row, Standard Profile, Top Entry—page 175 AMPMODU Mod II Vertical Board Mount Receptacle, Standard Profile, Double Row, Top Entry, 100 x .100 mt.—page 176 AMPMODU Mod IV Vertical Board Mount Receptacle, Low Profile, Single Row, Top Entry, Single Tine— page 178 AMPMODU Mod IV Vertical Board Mount Receptacle, Low Profile, Single Row, Bottom Entry— page 177 AMPMODU Mod IV Vertical Board Mount Receptacle, Low Profile, Double Row, Top Entry— pages 179, 180 AMPMODU Surface-Mount Receptacle, Top Entry Vertical Board Mount, Single Row, Dual Entry—page 187, 188 Bottom Entry AMPMODU Mod IV Vertical Top Entry Board Mount Receptacle, Low Profile, Double Row, Dual Entry— Bottom Entry page 182 AMPMODU Surface-Mount Receptacle, Top Entry Vertical Board Mount, Double Row, Dual Entry—page 189-192 Bottom Entry AMPMODU .600 [15.24] Mod IV Housing with Standard Pressure Contacts— pages 211-220 AMPMODU .600 [15.24] Mod IV Housing with Intermediate Pressure Contacts— pages 211-220 AMPMODU .600 [15.24] Mod IV Housing with High Pressure Contacts— pages 211-220 AMPMODU Mod IV Vertical Top Entry Board Mount Receptacle, Low Profile, Single Row, Dual Entry— Bottom Entry page 181 5 .230 [5.84] .280 [7.11] .183 [4.65] .330 [8.38] .183 [4.65] .330 [8.38] .183 [4.65] .255 [6.48] Posts Without Shoulders Posts With Shoulders For drawn wire products (ie, AMPMODU Breakaway and Low Profile Headers) and for products having the shoulder of the post below the housing or pc board surface (ie, AMPMODU MTE and Single Row Shrouded Headers) the effective mating length starts at the housing or pc board surface. For product having the shoulder of the post extending above the housing or pc board surface (ie, Standard AMPMODU Shrouded and Unshrouded Headers) the effective mating length starts at the top of the shoulder. Effective Mating Length Effective Mating Length Recommended Effective Mating Posts Lengths Minimum Maximum Receptacle Type Short Point Housing with Contacts— pages 222-224 AMPMODU MTE Unloaded Housing with Short Point Contacts—pages 222, 229, 231, 233 AMPMODU MTE IDC Assemblies AMPMODU MT IDC Assembly with Standard Pressure Contacts—page 256 AMPMODU MT IDC Assembly with High Pressure Contacts—page 257 Locking Clip Housing with Contacts—pages 207-209 Locking Clip Contact without Housing—page 207 .169 [4.29] .259 [6.58] .169 [4.29] .259 [6.58] .200 [5.08] .250 [6.35] .222 [5.64] .273 [6.93] .200 [5.08] .273 [6.93] .273 [6.93] .350 [8.89] .200 [5.08] .277 [7.04] .280 [7.11] * Flexible Flat Conductor Cable Receptacle with Round Wire Crimp High Pressure Contact— Catalog 82007 Single Row .267 [6.78] .323 [8.20] Double Row .282 [7.16] .323 [8.20] .183 [4.65] .255 [6.48] Single Row .210 [5.33] .323 [8.20] .183 [4.65] * Flexible Flat Conductor Cable Receptacle with Multiple Wire Crimp High Pressure Contact— Catalog 82007 .204 [5.18] * .183 [4.65] * .204 [5.18] * .183 [4.65] * .204 [5.18] * .210 [5.33] .283 [7.19] .205 [5.21] .283 [7.19] .185 [4.70] .283 [7.19] .183 [4.65] * .204 [5.18] * Double Row .225 [5.72] .323 [8.20] Flexible Flat Conductor Cable Receptacle with Round Wire Crimp Standard Pressure Contact—Catalog 82007 Single Row .267 [6.78] .323 [8.20] Double Row .282 [7.16] .323 [8.20] Flexible Flat Conductor Cable Receptacle with Multiple Crimp Standard Pressure Contact— Catalog 82007 Single Row .220 [5.59] .323 [8.20] Double Row .235 [5.97] .323 [8.20] *Maximum post length is determined by customer’s application; (i.e., available space beyond rear of horizontal receptacle assembly, or above bottom entry vertical receptacle assembly or below vertical receptacle assemblies used in pass through applications). 90 Catalog 1307819 Revised 8-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 AMPMODU Interconnection System Parallel Stacking Guide for Board-to-Board Applications See Figure Below 1 Dimension Between PC Boards Product Family Headers (See Note 1.) Single-Row (Page Ref.) Double-Row (Page Ref.) Product Family Receptacles Single-Row (Page Ref.) Double-Row (Page Ref.) .060 [1.52] Bandolier Posts 163 NA Dual Entry, Mod IV 102** 104** Dual Entry, Mod IV NA 110 Dual Entry, Mod IV 163 137** Top Entry, Mod IV 102** 104** Top Entry, Mod IV 177, 181, 187, 188 177, 181, 187, 188 177, 181, 187, 188 178, 181 187, 188 178, 181 187, 188 182-184, 189-192 182-184, 189-192 182-184, 189-192 179, 180, 182-184, 189-192 179, 180, 182-184, 189-192 .090 [2.29] .153 [3.89] 2 Breakaway** (Unshrouded) Surface Mount** Breakaway (Unshrouded) .265 [6.73] Bandolier Posts .355 [9.02] Breakaway** (Unshrouded) .385 [9.78] Low Profile Shrouded NA 135, 137** Top Entry, Mod IV NA 179,180 Surface Mount**, Mod IV, Top Entry 187, 188 189-192 Top Entry, Mod II 175 176 .418 [1.06] 2* .430 [10.92] 4* .440 [11.18] Shrouded, Mod II 115, 116 117, 119 Top Entry, Mod II or Mod IV 175, 178 176, 179, 180 Stacking Shroud (See Note 2.) Stacking Shroud (See Note 2.) Two-Piece Header Connector System Stacking Shroud (See Note 2.) Stacking Shroud (See Note 2.) NA 156 (Hood) NA 157 NA 160 NA 158 NA 198, 199 NA 196** NA 156 (Hood) NA 157 NA 161 NA 158 Stacking Unshrouded 112 113 Inner Board Receptacle (See Note 2.) Outer Board Receptacle (See Note 2.) Two-Piece Receptacle** Connector System Inner Board Receptacle (See Note 2.) Outer Board Receptacle (See Note 2.) Mod II/IV Receptacles, Top/Bottom Entry Various Various .528 [13.41] .547 [13.89] 4 .550 [13.97] .748 [19.00] .768 [19.51] Various 109 110 102** 104** Parallel Stacking Guide 3 Surface Mount** Breakaway (Unshrouded) Breakaway** (Unshrouded) **High temperature version available, see page ref. listed. Notes: 1. Headers listed are standard thru-hole versions. Many headers are available with retention feature and ACTION PIN posts. See product Notes: 1. specification pages in individual sections for option availability. Notes: 2. These headers and receptacles are Related Board-to-Board products. They are not part of the AMPMODU .025 [0.64] Square Product Family. 5 Board-to-Board Stacking Heights (By Receptacle/Header Combination) Receptacle Assembly Receptacle Assembly Receptacle Assembly .265 [6.73] .355 [9.02] .090 [2.29] Header Header Figure 1 Double-Row, Mod IV, Bottom Entry, Breakaway Header .265 [6.73] .265* [6.73] .090 [2.29] Figure 2 Double-Row, Mod IV, Top Entry, Breakaway Header *Mod II Receptacle Height is .340 [8.64] for a total stack height of .430 [10.92] .153 [3.89] .418 [10.62] .550* [13.97] Header Figure 3 Double-Row, Mod IV, Surface-Mount, Top Entry, Receptacle and Surface-Mount Breakaway Header Figure 4 Double-Row, Two-Piece Receptacle and Two-Piece Shrouded Header *Mod II Shrouded Header Height is .440 [11.18] for a total stack height of .440 [11.18] 91 Catalog 1307819 Revised 8-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 AMPMODU Interconnection System Standard Headers—Unshrouded Unshrouded Headers Product Facts ■ Variety of popular sizes available ■ Substantial time/labor savings—install all posts at one time ■ Vertical and right-angle versions available in single- and double-row configurations ■ Triple-row version available in vertical configuration with .230 [5.84] mating length ■ Copper alloy posts ■ Choice of select gold or tin plated posts ■ Mating length for single and double row is .318 [8.08] (.278 [7.06] effective mating length-see page 90) ■ Flame retardant, black thermoplastic housings; 94V-0 rated ■ Recognized under the Component Program of Underwriters Laboratories Inc., File No. E28476 Performance Characteristics R ■ 5 Certified by Canadian Standards Association, File No. LR 7189 Electrical R Insulation Resistance — 5,000 megohms minimum initial Dielectric Withstanding Voltage — 750 V rms at sea level Environmental Operating Temperature — -65°C to +105°C (black thermoplastic housings) Current — 3 amperes maximum per contact (dependent upon mating connector) 92 Catalog 1307819 Revised 8-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 AMPMODU Interconnection System Standard Headers—Unshrouded, Single Row, .100 [2.54] Centerline .025 [0.64] Square Straight Post .200 Ref. [5.08] (Contact Area) A .100 Typ. [2.54] .318 [8.08] .090 [2.29] .046/.038 [1.17/0.97] .042 [1.07] Typ. Material and Finish Mateable Connectors — Refer to the Mating Post Selection Guide — page 90 Technical Documents — page 276 See mating connector for applicable product and application specifications. Note: All part numbers are RoHS compliant. .100* [2.54] .035±.003 Dia.Typ. [0.89±0.08] Recommended PC Board Hole Layout (for .055 [1.40] min. thick PC board) *±.003 [±0.08] tolerances not to accumulate within one connector pattern. No. of Pos. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 Dimensions A B .084 [2.13] — .184 [4.67] .100 [2.54] .284 [7.21] .200 [5.08] .384 [9.75] .300 [7.62] .484 [12.29] .400 [10.16] .584 [14.83] .500 [12.70] .684 [17.37] .600 [15.24] .784 [19.91] .700 [17.78] .884 [22.45] .800 [20.32] .984 [24.99] .900 [22.86] 1.084 [27.53] 1.000 [25.40] 1.184 [30.07] 1.100 [27.94] 1.284 [32.61] 1.200 [30.48] 1.384 [35.15] 1.300 [33.02] 1.484 [37.69] 1.400 [35.56] 1.584 [40.23] 1.500 [38.10] 1.684 [42.77] 1.600 [40.64] 1.784 [45.31] 1.700 [43.18] 1.884 [47.85] 1.800 [45.72] 1.984 [50.39] 1.900 [48.26] 2.084 [52.93] 2.000 [50.80] 2.184 [55.47] 2.100 [53.34] 2.284 [58.01] 2.200 [55.88] 2.384 [60.55] 2.300 [58.42] 2.484 [63.09] 2.400 [60.96] 2.584 [65.63] 2.500 [63.50] 2.684 [68.17] 2.600 [66.04] 2.784 [70.71] 2.700 [68.58] 2.884 [73.25] 2.800 [71.12] 2.984 [75.79] 2.900 [73.66] 3.084 [78.33] 3.000 [76.20] 3.184 [80.87] 3.100 [78.74] 3.284 [83.41] 3.200 [81.28] 3.384 [85.95] 3.300 [83.82] 3.484 [88.49] 3.400 [86.36] 3.584 [91.03] 3.500 [88.90] 3.684 [93.57] 3.600 [91.44] 3.784 [96.11] 3.700 [93.98] 3.884 [98.65] 3.800 [96.52] 3.984 [101.19] 3.900 [99.06] Post Plating/Part Nos. Plating A Plating B 87220-1 87224-1 87220-2 87224-2 87220-3 87224-3 87220-4 87224-4 87220-5 87224-5 87220-6 87224-6 87220-7 87224-7 87220-8 87224-8 87220-9 87224-9 1-87220-0 1-87224-0 1-87220-1 1-87224-1 1-87220-2 1-87224-2 1-87220-3 1-87224-3 1-87220-4 1-87224-4 1-87220-5 1-87224-5 1-87220-6 1-87224-6 1-87220-7 1-87224-7 1-87220-8 1-87224-8 1-87220-9 1-87224-9 2-87220-0 2-87224-0 2-87220-1 2-87224-1 2-87220-2 2-87224-2 2-87220-3 2-87224-3 2-87220-4 2-87224-4 2-87220-5 2-87224-5 2-87220-6 2-87224-6 2-87220-7 2-87224-7 2-87220-8 2-87224-8 2-87220-9 2-87224-9 3-87220-0 3-87224-0 3-87220-1 3-87224-1 3-87220-2 3-87224-2 3-87220-3 3-87224-3 3-87220-4 3-87224-4 3-87220-5 3-87224-5 3-87220-6 3-87224-6 3-87220-7 3-87224-7 3-87220-8 3-87224-8 3-87220-9 3-87224-9 4-87220-0 4-87224-0 Unshrouded Headers Related Product Data .050 Max. Typ. [1.27] B B Housing — Black thermoplastic, 94V-0 rated Posts — Copper alloy, plated as follows: Plating A — Selectively plated .000030 [0.00076] gold on contact area, with gold flash over .000050 [0.00127] nickel on entire post Plating B — Selectively plated .000015 [0.00038] gold on contact area, with gold flash over .000050 [0.00127] nickel on entire post Tin/Nickel — Plating option available; minimum order quantities may apply. Consult Tyco Electronics. .125 [3.18] 5 93 Catalog 1307819 Revised 8-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 AMPMODU Interconnection System Standard Headers—Unshrouded, Single Row, .100 [2.54] Centerline (Continued) .025 [0.64] Square Right-Angle Post .139 [3.53] Ref. .025 [0.64] Typ. Material and Finish A Unshrouded Headers Housing — Black thermoplastic, 94V-0 rated Posts — Copper alloy, plated as follows: Plating A — Selectively plated .000030 [0.00076] gold on contact area, with gold flash over .000050 [0.00127] nickel on entire post Plating B — Selectively plated .000015 [0.00038] gold on contact area, with gold flash over .000050 [0.00127] nickel on entire post Tin/Nickel — Plating option available; minimum order quantities may apply. Consult Tyco Electronics. .042 [1.07] Typ. .069 [1.75] Typ. B .200 [5.08] Contact Area .040 [1.02] Ref. .069 [1.75] .025 [0.64] .138 [3.51] Ref. .100 [2.54] .110 [2.79] Ref. .157 [3.99] .318 [8.08] Ref. .025±.001 Typ. [0.63±0.03] .025±.002 Typ. [0.63±0.05] Related Product Data Mateable Connectors — Refer to the Mating Post Selection Guide — page 90 .100* [2.54] Typ. .035±.003 Dia. Typ. [0.89±0.08] Recommended PC Board Hole Layout (for .055 [1.40] min. thick PC board) Technical Documents — page 276 5 B See mating connector for applicable product and application specifications. *±.003 [±0.08] tolerances not to accumulate within one connector pattern. No. of Pos. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 Dimensions A B .084 [2.13] — .184 [4.67] .100 [2.54] .284 [7.21] .200 [5.08] .384 [9.75] .300 [7.62] .484 [12.29] .400 [10.16] .584 [14.83] .500 [12.70] .684 [17.37] .600 [15.24] .784 [19.91] .700 [17.78] .884 [22.45] .800 [20.32] .984 [24.99] .900 [22.86] 1.084 [27.53] 1.000 [25.40] 1.184 [30.07] 1.100 [27.94] 1.284 [32.61] 1.200 [30.48] 1.384 [35.15] 1.300 [33.02] 1.484 [37.69] 1.400 [35.56] 1.584 [40.23] 1.500 [38.10] 1.684 [42.77] 1.600 [40.64] 1.784 [45.31] 1.700 [43.18] 1.884 [47.85] 1.800 [45.72] 1.984 [50.39] 1.900 [48.26] Post Plating/Part Nos. Plating A Plating B 87232-1 87233-1 87232-2 87233-2 87232-3 87233-3 87232-4 87233-4 87232-5 87233-5 87232-6 87233-6 87232-7 87233-7 87232-8 87233-8 87232-9 87233-9 1-87232-0 1-87233-0 1-87232-1 1-87233-1 1-87232-2 1-87233-2 1-87232-3 1-87233-3 1-87232-4 1-87233-4 1-87232-5 1-87233-5 1-87232-6 1-87233-6 1-87232-7 1-87233-7 1-87232-8 1-87233-8 1-87232-9 1-87233-9 2-87232-0 2-87233-0 Note: All part numbers are RoHS compliant. 94 Catalog 1307819 Revised 8-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 AMPMODU Interconnection System Standard Headers—Unshrouded, Single Row, .100 [2.54] Centerline (Continued) No. of Pos. 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 Dimensions A B 2.084 [52.93] 2.000 [50.80] 2.184 [55.47] 2.100 [53.34] 2.284 [58.01] 2.200 [55.88] 2.384 [60.55 2.300 [58.42] 2.484 [63.09] 2.400 [60.96] 2.584 [65.63] 2.500 [63.50] 2.684 [68.17] 2.600 [66.04] 2.784 [70.71] 2.700 [68.58] 2.884 [73.25] 2.800 [71.12] 2.984 [75.79] 2.900 [73.66] 3.084 [78.33] 3.000 [76.20] 3.184 [80.87] 3.100 [78.74] 3.284 [83.41] 3.200 [81.28] 3.385 [85.95] 3.300 [83.82] 3.484 [88.49] 3.400 [86.36] 3.584 [91.03] 3.500 [88.90] 3.684 [93.57] 3.600 [91.44] 3.784 [96.11] 3.700 [93.98] 3.884 [98.65] 3.800 [96.52] 3.984 [101.19] 3.900 [99.06] Post Plating/Part Nos. Plating A Plating B 2-87232-1 2-87233-1 2-87232-2 2-87233-2 2-87232-3 2-87233-3 2-87232-4 2-87233-4 2-87232-5 2-87233-5 2-87232-6 2-87233-6 2-87232-7 2-87233-7 2-87232-8 2-87233-8 2-87232-9 2-87233-9 3-87232-0 3-87233-0 3-87232-1 3-87233-1 3-87232-2 3-87233-2 3-87232-3 3-87233-3 3-87232-4 3-87233-4 3-87232-5 3-87233-5 3-87232-6 3-87233-6 3-87232-7 3-87233-7 3-87232-8 3-87233-8 3-87232-9 3-87233-9 4-87232-0 4-87233-0 Unshrouded Headers 5 Note: All part numbers are RoHS compliant. 95 Catalog 1307819 Revised 8-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 AMPMODU Interconnection System Standard Headers—Unshrouded, Double-Row, .100 x .100 [2.54 x 2.54] Centerline .025 [0.64] Square Straight Post .100 [2.54] .200 Ref. [5.08] (Contact Area) A .100 Typ. [2.54] .318 [8.08] .090 [2.29] .046/.038 [1.17/0.97] .042 [1.07] Typ. Material and Finish Unshrouded Headers Housing — Black thermoplastic, 94V-0 rated Posts — Copper alloy, plated as follows: Plating A — Selectively plated .000030 [0.00076] gold on contact area, with gold flash over .000050 [0.00127] nickel on entire post Plating B — Selectively plated .000015 [0.00038] gold on contact area, with gold flash over .000050 [0.00127] nickel on entire post Tin/Nickel — Plating option available; minimum order quantities may apply. Consult Tyco Electronics. .050 Max. Typ. [1.27] B B .100* [2.54] .100* [2.54] .035±.003 Dia. Typ. [0.89±0.08] Recommended PC Board Hole Layout (for .055 [1.40] min. thick PC board) Related Product Data Mateable Connectors — Refer to the Mating Post Selection Guide — page 90 5 .125 [3.18] Accessories *±.003 [±0.08] tolerances not to accumulate within one connector pattern. No. of Pos. Barrier Insert — page 204 Technical Documents — page 276 See mating connector for applicable product and application specifications. 2 4 6 8 10 12 14 16 18 20 22 24 26 28 30 32 34 36 38 40 Dimensions A B .084 [2.13] — .184 [4.67] .100 [2.54] .284 [7.21] .200 [5.08] .384 [9.75] .300 [7.62] .484 [12.29] .400 [10.16] .584 [14.83] .500 [12.70] .684 [17.37] .600 [15.24] .784 [19.91] .700 [17.78] .884 [22.45] .800 [20.32] .984 [24.99] .900 [22.86] 1.084 [27.53] 1.000 [25.40] 1.184 [30.07] 1.100 [27.94] 1.284 [32.61] 1.200 [30.48] 1.384 [35.15] 1.300 [33.02] 1.484 [37.69] 1.400 [35.56] 1.584 [40.23] 1.500 [38.10] 1.684 [42.77] 1.600 [40.64] 1.784 [45.31] 1.700 [43.18] 1.884 [47.85] 1.800 [45.72] 1.984 [50.39] 1.900 [48.26] Post Plating/Part Nos. Plating A Plating B 1-87215-0 87227-1 1-87215-1 87227-2 1-87215-2 87227-3 87215-1 87227-4 87215-2 87227-5 87215-3 87227-6 87215-4 87227-7 87215-5 87227-8 87215-6 87227-9 87215-7 1-87227-0 1-87215-3 1-87227-1 87215-8 1-87227-2 87215-9 1-87227-3 1-87215-4 1-87227-4 1-87215-5 1-87227-5 1-87215-6 1-87227-6 1-87215-7 1-87227-7 1-87215-8 1-87227-8 1-87215-9 1-87227-9 2-87215-0 2-87227-0 Note: All part numbers are RoHS compliant. 96 Catalog 1307819 Revised 8-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 AMPMODU Interconnection System Standard Headers—Unshrouded, Double-Row, .100 x .100 [2.54 x 2.54] Centerline (Continued) No. of Pos. 42 44 46 48 50 52 54 56 58 60 62 64 66 68 70 72 74 76 78 80 Dimensions A B 2.084 [52.93] 2.000 [50.80] 2.184 [55.47] 2.100 [53.34] 2.284 [58.01] 2.200 [55.88] 2.384 [60.55] 2.300 [58.42] 2.484 [63.09] 2.400 [60.96] 2.584 [65.63] 2.500 [63.50] 2.684 [68.17] 2.600 [66.04] 2.784 [70.71] 2.700 [68.58] 2.884 [73.25] 2.800 [71.12] 2.984 [75.79] 2.900 [73.66] 3.084 [78.33] 3.000 [76.20] 3.184 [80.87] 3.100 [78.74] 3.284 [83.41] 3.200 [81.28] 3.384 [85.95] 3.300 [83.82] 3.484 [88.49] 3.400 [86.36] 3.584 [91.03] 3.500 [88.90] 3.684 [93.57] 3.600 [91.44] 3.784 [96.11] 3.700 [93.98] 3.884 [98.65] 3.800 [96.52] 3.984 [101.19] 3.900 [99.06] Post Plating/Part Nos. Plating A Plating B 2-87215-1 2-87227-1 2-87215-2 2-87227-2 2-87215-3 2-87227-3 2-87215-4 2-87227-4 2-87215-5 2-87227-5 2-87215-6 2-87227-6 2-87215-7 2-87227-7 2-87215-8 2-87227-8 2-87215-9 2-87227-9 3-87215-0 3-87227-0 3-87215-1 3-87227-1 3-87215-2 3-87227-2 3-87215-3 3-87227-3 3-87215-4 3-87227-4 3-87215-5 3-87227-5 3-87215-6 3-87227-6 3-87215-7 3-87227-7 3-87215-8 3-87227-8 3-87215-9 3-87227-9 4-87215-0 4-87227-0 Unshrouded Headers 5 Note: All part numbers are RoHS compliant. 97 Catalog 1307819 Revised 8-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 AMPMODU Interconnection System Standard Headers—Unshrouded, Double-Row, .100 x .100 [2.54 x 2.54] Centerline (Continued) .025 [0.64] Square Right-Angle Post .200 Ref. [5.08] (Contact Area) A .042 [1.07] Typ. .289 [7.34] .042 [1.07] .100 [2.54] .110 [2.79] .100 [2.54] Typ. Material and Finish Housing — Black thermoplastic, 94V-0 rated Posts — Copper alloy, plated as follows: Plating A — Selectively plated .000030 [0.00076] gold on contact area, with gold flash over .000050 [0.00127] nickel on entire post Plating B — Selectively plated .000015 [0.00038] gold on contact area, with gold flash over .000050 [0.00127] nickel on entire post Tin/Nickel — Plating option available; minimum order quantities may apply. Consult Tyco Electronics. Unshrouded Headers .069 [1.75] .318 [8.08] .157 [3.99] .100 [2.54] B B .100* [2.54] .035±.003 Dia. Typ. [0.89±0.08] .100* [2.54] Recommended PC Board Hole Layout (for .055 [1.40] min. thick PC board) *±.003 [±0.08] tolerances not to accumulate within one connector pattern. Related Product Data Mateable Connectors — Refer to the Mating Post Selection Guide — page 90 5 Technical Documents — page 276 See mating connector for applicable product and application specifications. No. of Pos. 2 4 6 8 10 12 14 16 18 20 22 24 26 28 30 32 34 36 38 40 Dimensions A B .084 [2.13] — .184 [4.67] .100 [2.54] .284 [7.21] .200 [5.08] .384 [9.75] .300 [7.62] .484 [12.29] .400 [10.16] .584 [14.83] .500 [12.70] .684 [17.37] .600 [15.24] .784 [19.91] .700 [17.78] .884 [22.45] .800 [20.32] .984 [24.99] .900 [22.86] 1.084 [27.53] 1.000 [25.40] 1.184 [30.07] 1.100 [27.94] 1.284 [32.61] 1.200 [30.48] 1.384 [35.15] 1.300 [33.02] 1.484 [37.69] 1.400 [35.56] 1.584 [40.23] 1.500 [38.10] 1.684 [42.77] 1.600 [40.64] 1.784 [45.31] 1.700 [43.18] 1.884 [47.85] 1.800 [45.72] 1.984 [50.39] 1.900 [48.26] Post Plating/Part Nos. Plating A Plating B 1-86479-3 87230-1 1-86479-4 87230-2 1-86479-5 87230-3 1-86479-6 87230-4 86479-3 87230-5 86479-4 87230-6 86479-5 87230-7 86479-2 87230-8 86479-6 87230-9 86479-1 1-87230-0 1-86479-7 1-87230-1 86479-7 1-87230-2 1-86479-0 1-87230-3 1-86479-8 1-87230-4 1-86479-9 1-87230-5 2-86479-0 1-87230-6 2-86479-1 1-87230-7 2-86479-2 1-87230-8 2-86479-3 1-87230-9 2-86479-4 2-87230-0 Note: All part numbers are RoHS compliant. 98 Catalog 1307819 Revised 8-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 AMPMODU Interconnection System Standard Headers—Unshrouded, Double-Row, .100 x .100 [2.54 x 2.54] Centerline (Continued) No. of Pos. 42 44 46 48 50 52 54 56 58 60 62 64 66 68 70 72 74 76 78 80 Dimensions A B 2.084 [52.93] 2.000 [50.80] 2.184 [55.47] 2.100 [53.34] 2.284 [58.01] 2.200 [55.88] 2.384 [60.55] 2.300 [58.42] 2.484 [63.09] 2.400 [60.96] 2.584 [65.63] 2.500 [63.50] 2.684 [68.17] 2.600 [66.04] 2.784 [70.71] 2.700 [68.58] 2.884 [73.25] 2.800 [71.12] 2.984 [75.79] 2.900 [73.66] 3.084 [78.33] 3.000 [76.20] 3.184 [80.87] 3.100 [78.74] 3.284 [83.41] 3.200 [81.28] 3.384 [85.95] 3.300 [83.82] 3.484 [88.49] 3.400 [86.36] 3.584 [91.03] 3.500 [88.90] 3.684 [93.57] 3.600 [91.44] 3.784 [96.11] 3.700 [93.98] 3.884 [98.65] 3.800 [96.52] 3.984 [101.19] 3.900 [99.06] Post Plating/Part Nos. Plating A Plating B 2-86479-5 2-87230-1 2-86479-6 2-87230-2 2-86479-7 2-87230-3 2-86479-8 2-87230-4 2-86479-9 2-87230-5 3-86479-0 2-87230-6 3-86479-1 2-87230-7 3-86479-2 2-87230-8 3-86479-3 2-87230-9 3-86479-4 3-87230-0 3-86479-5 3-87230-1 3-86479-6 3-87230-2 3-86479-7 3-87230-3 3-86479-8 3-87230-4 3-86479-9 3-87230-5 4-86479-0 3-87230-6 4-86479-1 3-87230-7 4-86479-2 3-87230-8 4-86479-3 3-87230-9 4-86479-4 4-87230-0 Unshrouded Headers 5 Note: All part numbers are RoHS compliant. 99 Catalog 1307819 Revised 8-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 AMPMODU Interconnection System Standard Headers—Unshrouded, Triple-Row, .100 [2.54] Centerline .025 [0.64] Square Straight Post A .338 [8.59] .100 [2.54] Typ. B .042 [1.07] Typ. Material and Finish Housing — Black thermoplastic, 94V-0 rated Posts — Phosphor bronze, duplex plated 000030 [0.00076] gold on contact area, .000100-.000200 [0.00254-0.00508] tin on solder area, with entire post underplated .000050 [0.00127] nickel .120 [3.05] .230 [5.84] .185 Ref. [4.70] (Contact Area) .100 [2.54] Typ. Technical Documents — page 276 See mating connector for applicable product and application specifications. Unshrouded Headers .069 [1.75] Typ. .120 [3.05] .100* [2.54] B .100* [2.54] .035±.003 Dia. Typ. [0.89±0.08] 5 .100* [2.54] Recommended PC Board Hole Layout (for .055 [1.40] min. thick PC board) *±.003 [±0.08] tolerances not to accumulate within one connector pattern. Dimensions No. of Pos. A B 9 12 15 18 21 24 27 30 33 42 45 60 69 72 96 120 .284 [7.21] .384 [9.75] .484 [12.29] .584 [14.83] .684 [17.37] .784 [19.91] .884 [22.45] .984 [24.99] 1.084 [27.53] 1.384 [35.15] 1.484 [37.69] 1.984 [50.39] 2.284 [58.01] 2.384 [60.55] 3.184 [80.87] 3.984 [101.19] .200 [5.08] .300 [7.62] .400 [10.16] .500 [12.70] .600 [15.24] .700 [17.78] .800 [20.32] .900 [22.86] 1.000 [25.40] 1.300 [33.02] 1.400 [35.56] 1.900 [48.26] 2.200 [55.88] 2.300 [58.42] 3.100 [78.74] 3.900 [99.06] Part Nos. 5-103817-1 5-103817-2 5-103817-3 5-103817-4 5-103817-5 5-103817-6 5-103817-7 5-103817-8 5-103817-9 6-103817-2 6-103817-3 6-103817-8 7-103817-1 7-103817-2 8-103817-0 8-103817-8 Note: All part numbers are RoHS compliant. 100 Catalog 1307819 Revised 8-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 AMPMODU Interconnection System Breakaway and Retention Headers—Unshrouded Product Facts Design and inventory versatility—headers can be broken into any size needed ■ Variety of popular sizes available ■ Substantial time/labor savings can install all posts at one time ■ Vertical and right-angle versions available in single- and double-row configurations ■ Phosphor bronze posts ■ Choice of gold duplex or tin plated posts ■ Post lengths include .230 [5.84] and .318 [8.08] for connector mating ■ Board retention feature available ■ Black, glass-filled thermoplastic housings; high temperature compatible ■ Recognized under the Component Program of Underwriters Laboratories Inc., File No. E28476 Performance Characteristics Electrical Insulation Resistance — 5,000 megohms minimum initial Dielectric Withstanding Voltage — 750 V rms at sea level R ■ Certified by Canadian Standards Association, File No. LR 7189 Breakaway and Retention Headers—Unshrouded ■ 5 R Environmental Operating Temperature — -65°C to +105°C (black thermoplastic housings) Current — 3 amperes maximum per contact (dependent upon mating receptacle) 101 Catalog 1307819 Revised 8-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 AMPMODU Interconnection System Breakaway Headers—Unshrouded, Single-Row, .100 [2.54] Centerline .025 [0.64] Square Straight Posts Headers with Solder Tails A B .025 [0.64] Typ. E Ref. (Contact Area) D .090 [2.29] C Material and Finish Breakaway and Retention Headers-Unshrouded Housing — Black thermoplastic, 94V-0 rated, high temperature compatible Posts — Phosphor bronze, plated as follows: Plating A — Duplex plated .000030 [0.00076] gold on contact area, .000100.000200 [0.00254-0.00508] tin on solder tail, with entire post underplated .000050 [0.00127] nickel Plating B — Duplex plated .000015 [0.00038] gold on contact area, .000100.000200 [0.00254-0.00508] tin on solder tail, with entire post underplated .000050 [0.00127] nickel Plating C — .000100-.000200 [0.00254-0.00508] tin over .000050 [0.00127] nickel .045 [1.14] Typ. B .035±.003 Dia. Typ. .100* [0.89±0.08] [2.54] (Plated) Recommended Hole Size Before Plating .045±.001 Dia. Typ. [1.14±0.02] .090±.002 [2.29±0.05] .030±.002 [0.76±0.05] Recommended PC Board Mounting Pattern (for .062 [1.57] thick PC board; .008 [.203] thick stencil) *±.003 [±0.08] tolerances not to accumulate within one connector pattern. Headers with Board Retention Tails A B .025 [0.64] Typ. Performance Characteristics (Board Retention Tails) .090 [2.29] C (see note 3) Insertion Force — 12 lb [53.4N] max. Retention Force — .25 lb [1.11N] min. 5 E Ref. (Contact Area) D .045 [1.14] Typ. B Related Product Data Mateable Connectors — Refer to the Mating Post Selection Guide — page 90 Technical Documents — page 276 .100* .040±.003 Dia. Typ. [2.54] [1.02±0.08] (Plated) Recommended Hole Size Before Plating .045±.001 Dia. Typ. [1.14±0.02] See mating connector for applicable product and application specifications. .150±.002 [3.81±0.05] .030±.002 [0.76±0.05] Recommended PC Board Mounting Pattern (for .062 [1.57] thick PC board; .008 [.203] thick stencil) *±.003 [±0.08] tolerances not to accumulate within one connector pattern. Dimensions C = .090 [2.29] D = .230 [5.84] E = .185 [4.70] Post Plating/Part Nos. Plating A Plating B Plating C C = .120 [3.05] D = .230 [5.84] E = .185 [4.70] Post Plating/Part Nos. Plating A Plating B Plating C C = .125 [3.18] D = .318 [8.08] E = .200 [5.08] Post Plating/Part Nos. Plating A Plating B Plating C Header Style No. of Pos. With Solder Tails (See Notes 1 and 2.) 1 .084 [2.13] — 5-146285-1 5-146284-1 5-146282-1 5-146281-1 5-146280-1 5-146278-1 5-146277-1 5-146276-1 5-146274-1 40 3.984 [101.19] 3.900 [99.06] 9-146285-0 9-146284-0 9-146282-0 9-146281-0 9-146280-0 9-146278-0 9-146277-0 9-146276-0 9-146274-0 With Board Retention Tails (See Notes 2 and 3.) 3 .284 [7.21] .200 [5.08] 5-146297-3 5-146296-3 5-146294-3 5-146293-3 5-146292-3 5-146290-3 5-146289-3 5-146288-3 5-146286-3 40 3.984 [101.19] 3.900 [99.06] 9-146297-0 9-146296-0 9-146294-0 9-146293-0 9-146292-0 9-146290-0 9-146289-0 9-146288-0 9-146286-0 A B Notes: 1. Headers without retention tails may be broken to the desired number of positions using Tool Kit No. 314818-1 (not shown). 2. Headers are also available in sizes 2 thru 39 positions (with Solder Tails) and 4 thru 39 positions (with Board Retention Tails). When ordering, add the prefix and/or suffix (dash) numbers plus 5- -0 to the base part number that corresponds with the desired size. For example, the complete part number for an 8-position header with solder tails (C dimension .090 [2.29], post plating A) would be 5-146285-8. The complete part number for a 26-position header with board retention tails (C dimension .120 [3.05], post plating B) would be 7-146292-6. This part numbering system applies only to this page. 3. For C dimensions .120 [3.05] and .125 [3.18], board retention using kinked tails are for headers 6 positions and smaller; headers 7 positions and larger use swaged tails. Headers with a C dimension of .090 [2.29] have swaged tails for all sizes. Note: All part numbers are RoHS compliant. 102 Catalog 1307819 Revised 8-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 AMPMODU Interconnection System Breakaway Headers—Unshrouded, Single-Row, .100 [2.54] Centerline (Continued) .025 [0.64] Square Right-Angle Posts Headers with Solder Tails A B D .100 Typ. [2.54] .090 [2.29] .138 [3.51] C Material and Finish Housing — Black thermoplastic, 94V-0 rated, high temperature compatible Posts — Phosphor bronze, duplex plated .000030 [0.00076] gold on contact area, .000100-.000200 [0.002540.00508] matte tin on solder tail, with entire post underplated .000050 [0.00127] nickel .042 [1.07] (2 Plc.) .035±.003 Dia. Typ. [0.89±0.08] (Plated) Recommended Hole Size Before Plating .045±.001 Dia. Typ. [1.14±0.02] Performance Characteristics (Board Retention Tails) .140 [3.56] .090±.002 [2.29±0.05] .030±.002 [0.76±0.05] Recommended PC Board Mounting Pattern (for .062 [1.57] thick PC board; .008 [.203] thick stencil) *±.003 [±0.08] tolerances not to accumulate within one connector pattern. Breakaway and Retention Headers-Unshrouded Insertion Force — 12 lb [53.4N] max. Retention Force — .25 lb [1.11N] min. .045 [1.14] Typ. .100* [2.54] E Ref. (Contact Area) Headers with Board Retention Tails Related Product Data A Mateable Connectors — Refer to the Mating Post Selection Guide — page 90 B D .090 [2.29] .100 Typ. [2.54] .138 [3.51] Technical Documents — page 276 C See mating connector for applicable product and application specifications. .042 [1.07] (2 Plc.) .040±.003 Dia. Typ. [1.02±0.08] (Plated) Recommended Hole Size Before Plating .045±.001 Dia. Typ. [1.14±0.02] .045 [1.14] Typ. .100* [2.54] .030±.002 [0.76±0.05] C = .120 [3.05] D = .230 [5.84] E = .185 [4.70] Part Nos. Dimensions C = .110 [2.79] D = .318 [8.08] E = .200 [5.08] Part Nos. Header Style No. of Pos. With Solder Tails (See Notes 1 and 2.) 1 .084 [2.13] — 5-146304-1 5-146305-1 40 3.984 [101.19] 3.900 [99.06] 9-146304-0 9-146305-0 With Board Retention Tails (See Note 2.) B .140 [3.56] .150±.002 [3.81±0.05] Recommended PC Board Mounting Pattern (for .062 [1.57] thick PC board; .008 [.203] thick stencil) *±.003 [±0.08] tolerances not to accumulate within one connector pattern. A 5 E Ref. (Contact Area) 3 .084 [2.13] — 5-146306-3 5-146307-3 40 3.984 [101.19] 3.900 [99.06] 9-146306-0 9-146307-0 Board Retention using Swaged Tails (All Header Sizes) Notes: 1. Headers without retention tails may be broken to the desired number of positions using Tool Kit No. 314818-1 (not shown). Notes: 2. Headers are also available in sizes 2 thru 39 positions (with Solder Tails) and 4 thru 39 positions (with Board Retention Tails). When ordering, add the prefix and/or suffix (dash) numbers plus 5- -0 to the base part number that corresponds with the number of positions. For example, the complete part number for an 8-position header with solder tails (C dimension .120 [3.05)] would be 5-146304-8. The complete part number for a 26-position header with board retention tails (C dimension .120 [3.05]) would be 7-146306-6. This part numbering system applies only to this page. Note: All part numbers are RoHS compliant. 103 Catalog 1307819 Revised 8-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 AMPMODU Interconnection System Breakaway Headers—Unshrouded, Double-Row, .100 x .100 [2.54 x 2.54] Centerline .025 [0.64] Square Straight Posts Headers with Solder Tails .192 [4.88] A B .025 [0.64] Typ. E Ref. (Contact Area) D .090 [2.29] C Material and Finish Breakaway and Retention Headers-Unshrouded Housing — Black thermoplastic, 94V-0 rated, high temperature compatible Posts — Phosphor bronze, plated as follows: Plating A — Duplex plated .000030 [0.00076] gold on contact area, .000100-.000200 [0.00254-0.00508] tin on solder tail, with entire post underplated .000050 [0.00127] nickel Plating B — Duplex plated .000015 [0.00038] gold on contact area, .000100-.000200 [0.00254-0.00508] tin on solder tail, with entire post underplated .000050 [0.00127] nickel Plating C — .000100-.000200 [0.00254-0.00508] tin over .000050 [0.00127] nickel .100 [2.54] ( CL of Hole Pattern) .045 Ref. [1.14] .100* [2.54] .090±.002 [2.29±0.05] .100 [2.54] .110 [2.79] ( CL of Stencil Pattern) .035±.003 Dia. Typ. [0.89±0.08] (Plated) Recommended Hole Size Before Plating .045±.001 Dia. Typ. [1.14±0.02] .030±.002 [0.76±0.05] Recommended PC Board Mounting Pattern (for .062 [1.57] thick PC board; .008 [.203] thick stencil) *±.003 [±0.08] tolerances not to accumulate within one connector pattern. Headers with Board Retention Tails A B .025 [0.64] Typ. Performance Characteristics (Board Retention Tails) .090 [2.29] Insertion Force — 12 lb [53.4N] max. Retention Force — .25 lb [1.11N] min. 5 E Ref. (Contact Area) D C .100 [2.54] ( CL of Hole Pattern) Related Product Data Mateable Connectors — Refer to the Mating Post Selection Guide — page 90 .075 Ref. [1.91] .100* [2.54] Technical Documents — page 276 See mating connector for applicable product and application specifications. .150±.002 [3.81±0.05] .030±.002 [0.76±0.05] .192 [4.88] .170 [4.32] C ( L of Stencil Pattern) .040±.003 Dia. Typ. [1.02±0.08] (Plated) Recommended Hole Size Before Plating .045±.001 Dia. Typ. [1.14±0.02] Recommended PC Board Mounting Pattern (for .062 [1.57] thick PC board; .008 [.203] thick stencil) *±.003 [±0.08] tolerances not to accumulate within one connector pattern. Dimensions Header Style No. of Pos. A B With Solder Tails (See Notes 1 and 2.) 2 .084 [2.13] — 80 3.984 [101.19] 2 .084 [2.13] 80 3.984 [101.19] With Board Retention Tails (See Note 2.) 3.900 [99.06] — 3.900 [99.06] C = .090 [2.29] D = .230 [5.84] E = .185 [4.70] Post Plating/Part Nos. Plating A Plating B Plating C C = .120 [3.05] D = .230 [5.84] E = .185 [4.70] Post Plating/Part Nos. Plating A Plating B Plating C C = .125 [3.18] D = .318 [8.08] E = .200 [5.08] Post Plating/Part Nos. Plating A Plating B Plating C 5-146261-1 5-146260-1 5-146258-1 5-146257-1 5-146256-1 5-146254-1 5-146253-1 5-146252-1 5-146250-1 9-146261-0 9-146260-0 9-146258-0 9-146257-0 9-146256-0 9-146254-0 9-146253-0 9-146252-0 9-146250-0 5-146273-1 5-146272-1 5-146270-1 5-146269-1 5-146268-1 5-146266-1 5-146265-1 5-146264-1 5-146262-1 9-146273-0 9-146272-0 9-146270-0 9-146269-0 9-146268-0 9-146266-0 9-146265-0 9-146264-0 9-146262-0 Notes: 1. Headers without retention tails may be broken to the desired number of positions using Tool Kit No. 314818-1 (not shown). 2. Headers are also available in sizes 4 thru 78 positions. When ordering, add the prefix and/or suffix (dash) numbers plus 5- -0 to the base part number that corresponds with the number of positions per row. For example, the complete part number for a 16-position header with solder tails (C dimension .090 [2.29], post plating A) would be 5-146261-8. The complete part number for a 40-position header with board retention tails (C dimension .120 [3.05], post plating B) would be 7-146268-0. This part numbering system applies only to this page. Note: All part numbers are RoHS compliant. 104 Catalog 1307819 Revised 8-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 AMPMODU Interconnection System Breakaway Headers—Unshrouded, Double-Row, .100 x .100 [2.54 x 2.54] Centerline (Continued) .025 [0.64] Square Right-Angle Posts Headers with Solder Tails A .042 [1.07] (2 Plc.) B D .100 Typ. [2.54] .090 [2.29] .238 [6.05] .100 [2.54] E Ref. (Contact Area) Material and Finish Housing — Black thermoplastic, 94V-0 rated, high temperature compatible Posts — Phosphor bronze, duplex plated .000030 [0.00076] gold on contact area, .000100-.000200 [0.00254-0.00508] tin on solder tail, with entire post underplated .000050 [0.00127] nickel .045 [1.14] Ref. .100* [2.54] .140 [3.56] .100 [2.54] .110 [2.79] ( CL of Stencil Pattern) .035±.003 Dia. Typ. [0.89±0.08] (Plated) Recommended Hole Size Before Plating .045±.001 Dia. Typ. [1.14±0.02] .100 [2.54] ( CL of Hole Pattern) .090±.002 [2.29±0.05] .030±.002 [0.76±0.05] Performance Characteristics (Board Retention Tails) C Insertion Force — 12 lb [53.4N] max. Retention Force — .25 lb [1.11N] min. Breakaway and Retention Headers-Unshrouded Recommended PC Board Mounting Pattern (for .062 [1.57] thick PC board; .008 [.203] thick stencil) *±.003 [±0.08] tolerances not to accumulate within one connector pattern. Headers with Board Retention Tails Related Product Data A .042 [1.07] (2 Plc.) Mateable Connectors — Refer to the Mating Post Selection Guide — page 90 B D .090 [2.29] .100 [2.54] .238 [6.05] Technical Documents — page 276 See mating connector for applicable product and application specifications. .075 [1.91] Typ. .100* [2.54] .100 [2.54] ( CL of Hole Pattern) .150±.002 .030±.002 [3.81±0.05] [0.76±0.05] E Ref. (Contact Area) 5 C .140 [3.56] .170 [4.32] ( CL of Stencil Pattern) .040±.003 Dia. Typ. [1.02±0.08] (Plated) Recommended Hole Size Before Plating .045±.001 Dia. Typ. [1.14±0.02] .100 [2.54] Recommended PC Board Mounting Pattern (for .062 [1.57] thick PC board; .008 [.203] thick stencil) *±.003 [±0.08] tolerances not to accumulate within one connector pattern. C = .120 [3.05] D = .230 [5.84] E = .185 [4.70] Part Nos. C = .110 [2.79] D = .318 [8.08] E = .200 [5.08] Part Nos. — 5-146308-1 5-146309-1 3.984 [101.19] 3.900 [99.06] 9-146308-0 9-146309-0 .084 [2.13] — 5-146310-1 5-146311-1 3.984 [101.19] 3.900 [99.06] 9-146310-0 9-146311-0 Dimensions Header Style No. of Pos. With Solder Tails (See Notes 1 and 2.) 2 .084 [2.13] 80 2 80 With Board Retention Tails (See Note 2.) A B Board Retention using Swaged Tails (All Header Sizes) Notes: 1. Headers without retention tails may be broken to the desired number of positions using Tool Kit No. 314818-1 (not shown). Notes: 2. Headers are also available in sizes 4 thru 78 positions. When ordering, add the prefix and/or suffix (dash) numbers plus 5- -0 to the base part number that corresponds with the number of positions per row. For example, the complete part number for a 16position header with solder tails (C dimension .120 [3.05)] would be 5-146308-8. The complete part number for a 40-position header with board retention tails (C dimension .120 [3.05]) would be 7-146310-0. This part numbering system applies only to this page. Note: All part numbers are RoHS compliant. 105 Catalog 1307819 Revised 8-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 AMPMODU Interconnection System AMPMODU Reeled Breakaway Headers Features of Breakaway Headers Design and inventory versatility — headers can easily be made into a variety of sizes ■ High Temperature Compatible ■ Reduced part number base ■ Reduced inventory burden ■ Applications Desktops & workstations Set-top boxes ■ Televisions ■ Automotive instrument panels & radios ■ Medical and test equipment ■ ■ Reeled Breakaway Headers Benefits Off the shelf availability Various header length capability using the same reel ■ Reduction of inventory costs ■ Economy version of the standard breakaway headers ■ ■ 5 Tyco Electronics now offers AMPMODU reeled breakaway headers, which are used for board-to-board interconnections, on a continuous reel. The reeled breakaway headers are an economy version of the standard breakaway headers, and continue to provide the same high quality standards that Tyco Electronics is known for in the connector industry. Reeled breakaway headers provide the flexibility to cut the headers to many different lengths, while only having to stock one part number. As a result, the amount of part numbers that need to be purchased and stored can be greatly reduced. Reeled breakaway headers can be purchased in single and double rows with tin, 5 Au, 15 Au, and 30 Au duplex plating. The lower applied cost also offers .230" and .318" mating lengths. (See standard breakaway-to-reeled header conversion chart for vertical headers on the reverse side of this sheet) Potential industries include: computer peripherals, telecommunications equipment, consumer, automotive, medical and test equipment. Tooling available from: Robo-Pak, Inc. 814 Lakeshore Drive East Bethel, MN 55902 A pin retention and pin removal tooling option is also available in addition to cutting. 106 Catalog 1307819 Revised 8-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 AMPMODU Interconnection System AMPMODU Reeled Breakaway Headers (Continued) Single Row 3.900 [99.06] .092 [2.34] .046±.003 [1.17±0.08] .025±.001 Typ. [0.64±0.03] .100 [2.54] .185 [4.70] (Contact Area) .230(1) [5.84] .100±.003 [2.54±0.08] .025±.002 [0.64±0.05] .110±.015(1) [2.79±0.38] Double Row .192 [4.88] .100 [2.54] .046±.003 [1.17±0.08] .025±.001 Typ. [0.64±0.03] .100 [2.54] .185 [4.70] (Contact Area) 5 .230(1) [5.84] .100±.003 [2.54±0.08] .025±.002 [0.64±0.05] (1) .110±.015(1) [2.79±0.38] See table for other mate and tail lengths. Standard Breakaway-to-Reeled Header Conversion Chart (Vertical) Double Row Headers Single Row Headers Plating Options Existing Tyco Electronics P/N Make From Reeled P/N Existing Tyco Electronics P/N Make From Reeled P/N Existing Tyco Electronics P/N Make From Reeled P/N Existing Tyco Electronics P/N Make From Reeled P/N Mate: .318 Tail: .125 103322 Mate: .318 Tail: .115 Mate: .230 Tail: .120 103328 Mate: .230 Tail: .110 Mate: .318 Tail: .125 103321 Mate: .318 Tail: .115 Mate: .230 Tail: .120 103327 Mate: .230 Tail: .110 Tin 5-146853-1 146250 102973 15 Au Duplex 5-146851-1 146254 103186 5-146861-1 146252 102977 30 Au Duplex 5-146859-1 146256 103240 5-146871-1 146253 5-146852-1 146274 102972 5-146860-1 5-146869-1 146257 5-146850-1 146278 103185 146276 102976 5-146858-1 146280 103239 5-146870-1 146277 5-146868-1 146281 Note: Reeled Headers are a functional substitute for standard breakaways, however there are visual differences (i.e. housing appearance and bow due to reeling requirement). Note: All part numbers are RoHS compliant. 107 Catalog 1307819 Revised 8-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 Reeled Breakaway Headers 3.900 [99.06] South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 AMPMODU Interconnection System PageHead_12_HelvCdBd Breakaway Surface Mount(Continued) Headers, .100 x .100 [2.54 x 2.54] Centerline Product Facts ■ Surface Mount Leads ■ Contact Material: phosphor bronze ■ High temperature, black thermoplastic housings, 94V-0 rated, capable of withstanding IR or vaporphase reflow ■ Recognized under the Component Program of Underwriters Laboratories Inc. File No. E28476 R Surface Mount Breakaway Headers ■ Certified by Canadian Standards Association, File No. LR 7189 R ■ Choice of gold duplex or tin plated posts ■ Posts coplanar within .006 [0.15] ■ Tape and reel packaging available in addition to single tube packaging. Contact Tyco Electronics. ■ Pick-and-place cap available for vacuum placement. Contact Tyco Electronics. 5 An extension of the AMPMODU Breakaway Header product family are the surface mount, vertical breakaway headers. The AMPMODU Surface Mount breakaway headers (Unshrouded) are available in single- and double-row vertical configurations with mating lengths of .230 [5.84] and .320 [8.13]. Posts are offered with a choice of either .000030 [.0007] gold duplex or tin plating. Current packaging is in a single tube but tape and reel is available for automatic pick-and-place. We also can provide a pickand-place cap for vacuum placement if required. 108 Catalog 1307819 Revised 8-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 AMPMODU Interconnection System Breakaway Surface Mount(Continued) PageHead_12_HelvCdBd Headers—Unshrouded Single-Row, .100 [2.54] Centerline .025 [0.64] Square Straight Post A B .100 Typ. [2.54] .092 [2.34] D Ref. (Contact Area) Material and Finish Housing — Black thermoplastic, 94V-0 rated Posts — Phosphor bronze, plated as follows: Plating A — Duplex plated .000030 [0.00076] gold on contact area, .000100-.000200 [0.00254-0.00508] tin on solder area, with entire post underplated .000050 [0.00127] nickel Plating B — .000100-.000200 [0.00254-0.00508] tin over .000050 [0.00127] nickel entire post .025 [0.63] C .090 [2.29] .063 [1.60] .042 [1.07] Typ. .100 Typ. [2.54] .050±.003 [1.27±0.08] .192 [4.88] .050 [1.27] Surface Mount Breakaway Headers .105 [2.67] Related Product Data .245 [6.22] Mateable Receptacle — Refer to Mating Post Selection Guide — page 90 .140±.003 [3.56±0.08] Recommended Etched Circuit Layout (Using .008 [0.20] thick stencil) Technical Documents — page 276 5 See mating connector for applicable product and application specifications. Dimensions A B No. of Pos. 3 4 5 6 7 8 9 10 11 12 13 14 15 .284 [7.21] .384 [9.75] .484 [12.29] .584 [14.83] .684 [17.37] .784 [19.91] .884 [22.45] .984 [24.99] 1.084 [27.53] 1.184 [30.07] 1.284 [32.61] 1.384 [35.15] 1.484 [37.69] .200 [5.08] .300 [7.62] .400 [10.16] .500 [12.70] .600 [15.24] .700 [17.78] .800 [20.32] .900 [22.86] 1.000 [25.40] 1.100 [27.94] 1.200 [30.48] 1.300 [33.02] 1.400 [35.56] C = .230 [5.84] D = .185 [4.70] Post Plating/Part Nos. Plating A Plating B 5-146128-1 5-146132-1 5-146128-2 5-146132-2 5-146128-3 5-146132-3 5-146128-4 5-146132-4 5-146128-5 5-146132-5 5-146128-6 5-146132-6 5-146128-7 5-146132-7 5-146128-8 5-146132-8 5-146128-9 5-146132-9 6-146128-0 6-146132-0 6-146128-1 6-146132-1 6-146128-2 6-146132-2 6-146128-3 6-146132-3 C = .320 [8.13] D = .200 [5.08] Post Plating/Part Nos. Plating A Plating B 5-146129-1 5-146133-1 5-146129-2 5-146133-2 5-146129-3 5-146133-3 5-146129-4 5-146133-4 5-146129-5 5-146133-5 5-146129-6 5-146133-6 5-146129-7 5-146133-7 5-146129-8 5-146133-8 5-146129-9 5-146133-9 6-146129-0 6-146133-0 6-146129-1 6-146133-1 6-146129-2 6-146133-2 6-146129-3 6-146133-3 Note: All part numbers are RoHS compliant. 109 Catalog 1307819 Revised 8-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 AMPMODU Interconnection System Breakaway Surface Mount(Continued) PageHead_12_HelvCdBd Headers—Unshrouded Double-Row, .100 x .100 [2.54 x 2.54] Centerline .025 [0.64] Square Straight Post A B .100 Typ. [2.54] .192 [4.88] .100 [2.54] Material and Finish D Ref. (Contact Area) Surface Mount Breakaway Headers Housing — Black thermoplastic, 94V-0 rated Posts — Phosphor bronze, plated as follows: Plating A — Duplex plated .000030 [0.00076] gold on contact area, .000100-.000200 [0.00254-0.00508] tin on solder area, with entire post underplated .000050 [0.00127] nickel Plating B — .000100-.000200 [0.00254-0.00508] tin over .000050 [0.00127] nickel entire post .090 [2.29] .025 [0.64] .042 [1.07] Typ. .292 [7.42] B .100 Typ. [2.54] .345 [8.76] Related Product Data C .063 [1.60] .050 [1.27] .140±.003 [3.56±0.08] .205 [5.21] Mateable Receptacles — Refer to Mating Post Selection Guide — page 90 .065 [1.65] .050±.003 [1.27±0.08] Recommended Etched Circuit Layout (Using .008 [0.20] thick stencil) 5 Dimensions No. of Pos. A B 4 6 8 10 12 14 16 18 20 22 24 26 28 30 .184 [4.67] .284 [7.21] .384 [9.75] .484 [12.29] .584 [14.83] .684 [17.37] .784 [19.91] .884 [22.45] .984 [24.99] 1.084 [27.53] 1.184 [30.07] 1.284 [32.61] 1.384 [35.15] 1.484 [37.69] .100 [2.54] .200 [5.08] .300 [7.62] .400 [10.16] .500 [12.70] .600 [15.24] .700 [17.78] .800 [20.32] .900 [22.86] 1.000 [25.40] 1.100 [27.94] 1.200 [30.48] 1.300 [33.02] 1.400 [35.56] C = .230 [5.84] D = .185 [4.70] Post Plating/Part Nos. Plating A Plating B 5-146130-1 5-146134-1 5-146130-2 5-146134-2 5-146130-3 5-146134-3 5-146130-4 1-146134-7 5-146130-5 5-146134-5 5-146130-6 5-146134-6 5-146130-7 1-146134-9 5-146130-8 5-146134-8 5-146130-9 5-146134-9 6-146130-0 6-146134-0 6-146130-1 6-146134-1 6-146130-2 6-146134-2 6-146130-3 6-146134-3 6-146130-4 2-146134-1 C = .320 [8.13] D = .200 [5.08] Post Plating/Part Nos. Plating A Plating B 5-146131-1 5-146135-1 5-146131-2 1-146135-6 5-146131-3 5-146135-3 5-146131-4 5-146135-4 5-146131-5 5-146135-5 5-146131-6 5-146135-6 5-146131-7 5-146135-7 5-146131-8 5-146135-8 5-146131-9 5-146135-9 6-146131-0 6-146135-0 6-146131-1 6-146135-1 6-146131-2 6-146135-2 6-146131-3 6-146135-3 6-146131-4 6-146135-4 Note: All part numbers are RoHS compliant. 110 Catalog 1307819 Revised 8-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 AMPMODU Interconnection System Unshrouded Stacking Headers—Breakaway PageHead_12_HelvCdBd (Continued) .100 x .100 [2.54 x 2.54] Centerline Product Facts Available in single and double row ■ Parallel PC board stacking with numerous stack heights available ■ Drawn wire posts allow 4 side mateability ■ May eliminate the need for additional board spacers ■ Can be used in conjunction with bottom entry receptacles ■ Gold or tin plated ■ Up to 1.430 [36.32] overall post length ■ Retention and surface mount features available upon request ■ Other header sizes can be made upon request ■ Tape and reel packaging available. Contact Tyco Electronics. ■ Pick-and-place cap available for vacuum placement. Contact Tyco Electronics. Unshrouded Stacking Headers— Breakaway ■ 5 111 Catalog 1307819 Revised 8-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 AMPMODU Interconnection System Unshrouded Stacking Headers PageHead_12_HelvCdBd (Continued) — Breakaway, Single-Row, .100 [2.54] Centerline .025 [0.64] Square Straight Posts .092 [2.34] .046±.003 [1.17±0.08] Header Size No. of Pos. x .100 [2.54] .025±.001 Typ. [0.64±0.03] B A C .090±.003 [2.29±0.08] Material and Finish Unshrouded Stacking Headers— Breakaway Housing — Black thermoplastic, 94V-0 rated Posts — Phosphor bronze, plated as follows: Plating — As noted in chart: Tin — .000100-.000200 [0.002540.00508] tin over .000050 [0.00127] nickel entire post 15Au — .000015 [0.00038] gold over .000050 [0.00127] nickel entire post .042±.008 [1.07±0.20] 4 Places D .100±.003 Typ. [2.54±0.08] Tolerance Non-Cumulative .035±.003 Dia. Typ. [0.89±0.08] Recommended PC Board Hole Layout Related Product Data Mateable Receptacles — Refer to the Mating Post Selection Guide — page 88 5 Technical Documents — page 276 See mating connector for applicable product and application specifications. Retention and surface mount features available upon request. Other header sizes can be made upon request. *Note: Headers are available in sizes 1 thru 40. When ordering, add the prefix and/or suffix (dash) numbers plus 5- -0 to the base part number that corresponds with the number of positions per row. For example, the complete part number for an 8-position header is 5-146455-8. The complete part number for a 16-position of the same series would be 6-146455-6. Base Number (see note) 146455 146456 146457 146458 146459 146460 146461 146462 146463 146464 146465 146466 146467 146468 146469 146470 146471 146472 146473 146474 146475 146476 146477 146478 146479 146480 146481 146482 A Stack Height .200 [5.08] .250 [6.35] .250 [6.35] .300 [7.62] .400 [10.16] .450 [11.43] .500 [12.70] .300 [7.62] .600 [15.24] .400 [10.16] .700 [17.78] .500 [12.70] .270 [6.86] .800 [20.32] .600 [15.24] .370 [9.39] .900 [22.86] .700 [17.78] .470 [11.39] 1.000 [25.40] .800 [20.32] .570 [14.47] 1.100 [27.94] .900 [22.68] .670 [17.01] 1.200 [30.48] 1.000 [25.40] .770 [19.55] B Tail Length .130 [3.30] .080 [2.03] .114 [2.89] .123 [3.12] .107 [2.71] .057 [1.45] .129 [3.27] .109 [2.77] .107 [2.71] .087 [2.20] .120 [3.05] .100 [2.54] .330 [8.38] .120 [3.05] .100 [2.54] .330 [8.38] .120 [3.05] .100 [2.54] .330 [8.38] .120 [3.05] .100 [2.54] .330 [8.38] .120 [3.05] .100 [2.54] .330 [8.38] .120 [3.05] .100 [2.54] .330 [8.38] C Post Length .440 [11.17] .440 [11.17] .474 [12.03] .533 [13.53] .617 [15.67] .617 [15.67] .739 [18.77] .739 [18.77] .817 [20.75] .817 [20.75] .930 [23.62] .930 [23.62] .930 [23.62] 1.030 [26.16] 1.030 [26.16] 1.030 [26.16] 1.130 [28.70] 1.130 [28.70] 1.130 [28.70] 1.230 [31.24] 1.230 [31.24] 1.230 [31.24] 1.330 [33.78] 1.330 [33.78] 1.330 [33.78] 1.430 [36.32] 1.430 [36.32] 1.430 [36.32] D Mating Length .110 [2.79] .110 [2.79] .110 [2.79] .110 [2.79] .110 [2.79] .110 [2.79] .110 [2.79] .330 [8.38] .110 [2.79] .330 [8.38] .110 [2.79] .330 [8.38] .330 [8.38] .110 [2.79] .330 [8.38] .330 [8.38] .110 [2.79] .330 [8.38] .330 [8.38] .110 [2.79] .330 [8.38] .330 [8.38] .110 [2.79] .330 [8.38] .330 [8.38] .110 [2.79] .330 [8.38] .330 [8.38] B End Plating D End Plating TIN TIN TIN TIN TIN TIN TIN TIN TIN TIN TIN TIN 15 AU TIN TIN 15 AU TIN TIN 15 AU TIN TIN 15 AU TIN TIN 15 AU TIN TIN 15 AU TIN TIN TIN TIN TIN TIN TIN 15 AU TIN 15 AU TIN 15 AU 15 AU TIN 15 AU 15 AU TIN 15 AU 15 AU TIN 15 AU 15 AU TIN 15 AU 15 AU TIN 15 AU 15 AU Note: All part numbers are RoHS compliant. 112 Catalog 1307819 Revised 8-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 AMPMODU Interconnection System Unshrouded Stacking Headers PageHead_12_HelvCdBd (Continued) — Breakaway, Double-Row, .100 x .100 [2.54 x 2.54] Centerline .025 [0.64] Square Straight Posts .192 [4.88] .046±.003 [1.17±0.08] Header Size No. of Pos. x .100 [2.54] .025±.001 Typ. [0.64±0.03] .100 [2.54] B C A .090±.003 [2.29±0.08] Material and Finish Housing — Black thermoplastic, 94V-0 rated Posts — Phosphor bronze, plated as follows: Plating — As noted in chart: Tin — .000100-.000200 [0.002540.00508] tin over .000050 [0.00127] nickel entire post 15Au — .000015 [0.00038] gold over .000050 [0.00127] nickel entire post D .042±.008 [1.07±0.20] 4 Places Unshrouded Stacking Headers— Breakaway .100±.003 Typ. [2.54±0.08] Tolerance Non-Cumulative .100±.003 [2.54±0.08] .035±.003 Dia. Typ. [0.89±0.08] Related Product Data Mateable Connectors — Refer to the Mating Post Selection Guide — page 90 Technical Documents — page 276 See mating connector for applicable product and application specifications. Retention and surface mount features available upon request. Other header sizes can be made upon request. *Note: Headers are available in sizes 2 thru 80. When ordering, add the prefix and/or suffix (dash) numbers plus 5- -0 to the base part number that corresponds with the number of positions per row. For example, the complete part number for a 16-position header is 5-146283-8. The complete part number for a 32-position of the same series would be 6-146283-6. Recommended PC Board Hole Layout Base Number (see note) 146483 146484 146485 146486 146487 146488 146489 146490 146491 146492 146493 146494 146495 146496 146497 146498 146499 146500 146501 146502 146503 146504 146505 146506 146507 146508 146509 146510 A Stack Height .200 [5.08] .250 [6.35] .250 [6.35] .300 [7.62] .400 [10.16] .450 [11.43] .500 [12.70] .300 [7.62] .600 [15.24] .400 [10.16] .700 [17.78] .500 [12.70] .270 [6.86] .800 [20.32] .600 [15.24] .370 [9.39] .900 [22.86] .700 [17.78] .470 [11.93] 1.000 [25.40] .800 [20.32] .570 [14.74] 1.100 [27.94] .900 [22.68] .670 [17.01] 1.200 [30.48] 1.000 [25.40] .770 [19.55] B Tail Length .130 [3.30] .080 [2.03] .114 [2.89] .123 [3.12] .107 [2.71] .057 [1.45] .129 [3.27] .109 [2.77] .107 [2.71] .087 [2.20] .120 [3.05] .100 [2.54] .330 [8.38] .120 [3.05] .100 [2.54] .330 [8.38] .120 [3.05] .100 [2.54] .330 [8.38] .120 [3.05] .100 [2.54] .330 [8.38] .120 [3.05] .100 [2.54] .330 [8.38] .120 [3.05] .100 [2.54] .330 [8.38] C Post Length .440 [11.17] .440 [11.17] .474 [12.03] .533 [13.53] .617 [15.67] .617 [15.67] .739 [18.77] .739 [18.77] .817 [20.75] .817 [20.75] .930 [23.62] .930 [23.62] .930 [23.62] 1.030 [26.16] 1.030 [26.16] 1.030 [26.16] 1.130 [28.70] 1.130 [28.70] 1.130 [28.70] 1.230 [31.24] 1.230 [31.24] 1.230 [31.24] 1.330 [33.78] 1.330 [33.78] 1.330 [33.78] 1.430 [36.32] 1.430 [36.32] 1.430 [36.32] D Mating Length .110 [2.79] .110 [2.79] .110 [2.79] .110 [2.79] .110 [2.79] .110 [2.79] .110 [2.79] .330 [8.38] .110 [2.79] .330 [8.38] .110 [2.79] .330 [8.38] .330 [8.38] .110 [2.79] .330 [8.38] .330 [8.38] .110 [2.79] .330 [8.38] .330 [8.38] .110 [2.79] .330 [8.38] .330 [8.38] .110 [2.79] .330 [8.38] .330 [8.38] .110 [2.79] .330 [8.38] .330 [8.38] B End Plating D End Plating TIN TIN TIN TIN TIN TIN TIN TIN TIN TIN TIN TIN 15 AU TIN TIN 15 AU TIN TIN 15 AU TIN TIN 15 AU TIN TIN 15 AU TIN TIN 15 AU TIN TIN TIN TIN TIN TIN TIN 15 AU TIN 15 AU TIN 15 AU 15 AU TIN 15 AU 15 AU TIN 15 AU 15 AU TIN 15 AU 15 AU TIN 15 AU 15 AU TIN 15 AU 15 AU 5 Note: All part numbers are RoHS compliant. 113 Catalog 1307819 Revised 8-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 AMPMODU Interconnection System PageHead_12_HelvCdBd Standard Profile Headers—Shrouded (Continued) Standard Profile Headers, Shrouded Product Facts ■ Available in several styles— right-angle with three- and four-sided pin protection, and straight post with pin protection and mounting ears ■ Post retention feature available ■ Can be used for feed-to and feed-thru applications ■ Housings are black thermoplastic, flame retardant 94V-0 rated ■ Contacts are copper alloy ■ Available in gold duplex, gold over nickel and tin over nickel platings ■ Headers with .066 [1.68] and .150 [3.81] end dimensions are available in select sizes up to 60 positions ■ Can be select loaded, consult Tyco Electronics ■ Recognized under the Component Program of Underwriters Laboratories Inc. File No. E28476 Performance Characteristics R ■ 5 Certified by Canadian Standards Association, File No. LR 7189 Electrical R Insulation Resistance — 5,000 megohms minimum initial Dielectric Withstanding Voltage — 750 RMS at sea level Environmental Operating Temperature — -65°C to +105°C (black thermoplastic housings) Current — 3 amperes maximum per contact 114 Catalog 1307819 Revised 8-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 AMPMODU Interconnection System Standard Profile Headers—Shrouded, PageHead_12_HelvCdBd (Continued) Single-Row, .100 [2.54] Centerline .025 [0.64] Square Straight Post (with Standoffs) .549 [13.94] .200 Ref. [5.08] (Contact Area) A Material and Finish .134 [3.40] .219 [5.56] C .100 Typ. [2.54] .214 [5.44] .013 [0.33] (Standoffs) .070 [1.78] Typ. .040 [1.02] Typ. B .240 [6.10] .330 [8.38] .130 [3.30] Standard Profile Headers, Shrouded Housing — Black thermoplastic, 94V-0 rated Posts — Phosphor bronze, plated as follows: Plating A — Duplex plated .000030 [0.00076] gold on contact area, .000100-.000200 [0.00254-0.00508] tin on solder area, with entire post underplated .000050 [0.00127] nickel Plating B — Duplex plated .000015 [0.00038] gold on contact area, .000100-.000200 [0.00254-0.00508] tin on solder area, with entire post underplated .000050 [0.00127] nickel Plating C — .000100-.000200 [0.00254-0.00508] tin over .000050 [0.00127] nickel on entire post .110 [2.79] Typ. C .100* [2.54] Typ. .035±.003 Dia. Typ. [0.89±0.08] Recommended PC Board Hole Layout (for .055 [1.40] min. thick PC board) Related Product Data Mateable Connectors — AMPMODU Wire-Applied Receptacles — page 215 AMPMODU MTE Receptacles — pages 228, 229, 234 Technical Documents — page 276 See mating connector for applicable product and application specifications. 5 *±.003 [±0.08] tolerances not to accumulate within one connector pattern. No. of Pos. 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 A .420 [10.67] .520 [13.21] .620 [15.75] .720 [18.29] .820 [20.83] .920 [23.37] 1.020 [25.91] 1.120 [28.45] 1.220 [30.99] 1.320 [33.53] 1.420 [36.07] 1.520 [38.61] 1.620 [41.15] 1.720 [43.69] 1.820 [46.23] 1.920 [48.77] 2.020 [51.31] 2.120 [53.85] 2.220 [56.39] 2.320 [58.93] 2.420 [61.47] 2.520 [64.01] 2.620 [66.55] Dimensions B .340 [8.64] .440 [11.18] .540 [13.72] .640 [16.26] .740 [18.80] .840 [21.34] .940 [23.88] 1.040 [26.42] 1.140 [28.96] 1.240 [31.50] 1.340 [34.04] 1.440 [36.58] 1.540 [39.12] 1.640 [41.66] 1.740 [44.20] 1.840 [46.74] 1.940 [49.28] 2.040 [51.82] 2.140 [54.36] 2.240 [56.90] 2.340 [59.44] 2.440 [61.98] 2.540 [64.52] C .200 [5.08] .300 [7.62] .400 [10.16] .500 [12.70] .600 [15.24] .700 [17.78] .800 [20.32] .900 [22.86] 1.000 [25.40] 1.100 [27.94] 1.200 [30.48] 1.300 [33.02] 1.400 [35.56] 1.500 [38.10] 1.600 [40.64] 1.700 [43.18] 1.800 [45.72] 1.900 [48.26] 2.000 [50.80] 2.100 [53.34] 2.200 [55.88] 2.300 [58.42] 2.400 [60.96] Post Plating/Part Nos. Plating A Plating B Plating C 5-103414-1 8-102202-4 5-103080-1 5-103414-2 5-102202-1 5-103080-2 5-103414-3 5-102202-2 5-103080-3 5-103414-4 5-102202-3 5-103080-4 5-103414-5 5-102202-4 5-103080-5 5-103414-6 5-102202-5 5-103080-6 5-103414-7 5-102202-6 5-103080-7 5-103414-8 5-102202-7 5-103080-8 5-103414-9 5-102202-8 5-103080-9 6-103414-0 5-102202-9 6-103080-0 6-103414-1 6-102202-0 6-103080-1 6-103414-2 6-102202-1 6-103080-2 6-103414-3 6-102202-2 6-103080-3 6-103414-4 6-102202-3 6-103080-4 6-103414-5 6-102202-4 6-103080-5 6-103414-6 6-102202-5 6-103080-6 6-103414-7 6-102202-6 6-103080-7 6-103414-8 6-102202-7 6-103080-8 6-103414-9 6-102202-8 6-103080-9 7-103414-0 6-102202-9 7-103080-0 7-103414-1 7-102202-0 7-103080-1 7-103414-2 7-102202-1 7-103080-2 7-103414-3 7-102202-2 7-103080-3 Note: All part numbers are RoHS compliant. 115 Catalog 1307819 Revised 8-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 AMPMODU Interconnection System Standard Profile Headers—Shrouded, PageHead_12_HelvCdBd (Continued) Single-Row, .100 [2.54] Centerline (Continued) .025 [0.64] Square Right-Angle Post (with Standoffs) .549 [13.94] A .134 [3.40] Material and Finish Standard Profile Headers, Shrouded Housing — Black thermoplastic, 94V-0 rated Posts — Phosphor bronze, plated as follows: Plating A — Duplex plated .000030 [0.00076] gold on contact area, .000100-.000200 [0.00254-0.00508] tin on solder area, with entire post underplated .000050 [0.00127] nickel Plating B — Duplex plated .000015 [0.00038] gold on contact area, .000100-.000200 [0.00254-0.00508] tin on solder area, with entire post underplated .000050 [0.00127] nickel Plating C — .000100-.000200 [0.00254-0.00508] tin over .000050 [0.00127] nickel on entire post C .200 Ref. [5.08] (Contact Area) .100 Typ. [2.54] .240 [6.10] .219 [5.56] .110 [2.79] .214 [5.44] .070 [1.78] Typ. .330 [8.38] .151 [3.84] .013 [0.33] (Standoffs) B .040 [1.02] Typ. C .035±.003 Dia. [0.89±0.08] .100* [2.54] Typ. Recommended PC Board Hole Layout (for .055 [1.40] min. thick PC board) *±.003 [±0.08] tolerances not to accumulate within one connector pattern. Related Product Data Mateable Connectors — AMPMODU Wire-Applied Receptacles — page 215 AMPMODU MTE Receptacles — pages 228, 229, 234 5 Technical Documents — page 276 See mating connector for applicable product and application specifications. No. of Pos. 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 A .420 [10.67] .520 [13.21] .620 [15.75] .720 [18.29] .820 [20.83] .920 [23.37] 1.020 [25.91] 1.120 [28.45] 1.220 [30.99] 1.320 [33.53] 1.420 [36.07] 1.520 [38.61] 1.620 [41.15] 1.720 [43.69] 1.820 [46.23] 1.920 [48.77] 2.020 [51.31] 2.120 [53.85] 2.220 [56.39] 2.320 [58.93] 2.420 [61.47] 2.520 [64.01] 2.620 [66.55] Dimensions B .340 [8.64] .440 [11.18] .540 [13.72] .640 [16.26] .740 [18.80] .840 [21.34] .940 [23.88] 1.040 [26.42] 1.140 [28.96] 1.240 [31.50] 1.340 [34.04] 1.440 [36.58] 1.540 [39.12] 1.640 [41.66] 1.740 [44.20] 1.840 [46.74] 1.940 [49.28] 2.040 [51.82] 2.140 [54.36] 2.240 [56.90] 2.340 [59.44] 2.440 [61.98] 2.540 [64.52] C .200 [5.08] .300 [7.62] .400 [10.16] .500 [12.70] .600 [15.24] .700 [17.78] .800 [20.32] .900 [22.86] 1.000 [25.40] 1.100 [27.94] 1.200 [30.48] 1.300 [33.02] 1.400 [35.56] 1.500 [38.10] 1.600 [40.64] 1.700 [43.18] 1.800 [45.72] 1.900 [48.26] 2.000 [50.80] 2.100 [53.34] 2.200 [55.88] 2.300 [58.42] 2.400 [60.96] Post Plating/Part Nos. Plating A Plating B Plating C 5-103361-1 8-102203-4 5-102523-1 5-103361-2 5-102203-1 5-102523-2 5-103361-3 5-102203-2 5-102523-3 5-103361-4 5-102203-3 5-102523-4 5-103361-5 5-102203-4 5-102523-5 5-103361-6 5-102203-5 5-102523-6 5-103361-7 5-102203-6 5-102523-7 5-103361-8 5-102203-7 5-102523-8 5-103361-9 5-102203-8 5-102523-9 6-103361-0 5-102203-9 6-102523-0 6-103361-1 6-102203-0 6-102523-1 6-103361-2 6-102203-1 6-102523-2 6-103361-3 6-102203-2 6-102523-3 6-103361-4 6-102203-3 6-102523-4 6-103361-5 6-102203-4 6-102523-5 6-103361-6 6-102203-5 6-102523-6 6-103361-7 6-102203-6 6-102523-7 6-103361-8 6-102203-7 6-102523-8 6-103361-9 6-102203-8 6-102523-9 7-103361-0 6-102203-9 7-102523-0 7-103361-1 7-102203-0 7-102523-1 7-103361-2 7-102203-1 7-102523-2 7-103361-3 7-102203-2 7-102523-3 Note: All part numbers are RoHS compliant. 116 Catalog 1307819 Revised 8-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 AMPMODU Interconnection System Standard Profile Headers—Shrouded, PageHead_12_HelvCdBd (Continued) with .066 [1.68] End Dimension, Double-Row, .100 x .100 [2.54 x 2.54] Centerline .025 [0.64] Square Straight Post (with Detent Windows) .040 [1.02] (3 Plc.) B .066 [1.68] (2 Plc.) C .100 Typ. [2.54] .200 Ref. [5.08] (Contact Area) .100 [2.54] .400 [10.16] .125 [3.18] .280 [7.11] .090 [2.29] (2 Plc.) A .090 [2.29] .240 [6.10] Typ. E Material and Finish .318 [8.08] D .440 [11.18] .080 [2.03] C .100* Typ. [2.54] Standard Profile Headers, Shrouded Housing — Black thermoplastic, 94V-0 rated Posts — Phosphor bronze, plated as follows: Plating A — Duplex plated .000030 [0.00076] gold on contact area, .000100-.000200 [0.00254-0.00508] tin on solder area, with entire post underplated .000050 [0.00127] nickel Plating B — Duplex plated .000015 [0.00038] gold on contact area, .000100-.000200 [0.00254-0.00508] tin on solder area, with entire post underplated .000050 [0.00127] nickel Plating C — .000100-.000200 [0.00254-0.00508] tin over .000050 [0.00127] nickel on entire post .100* [2.54] .035±.003 Dia. Typ. [0.89±0.08] Recommended PC Board Hole Layout (for .055 [1.40] min. thick PC board) *±.003 [±0.08] tolerances not to accumulate within one connector pattern. Related Product Data Mateable Connectors — AMPMODU Board Mount Receptacles — pages 176, 179, 180 AMPMODU Wire-Applied Receptacles — pages 216-219 AMPMODU MTE Receptacles — pages 228, 229, 234 AMPMODU MT Receptacles — pages 256, 257 B Dimensions C D E 6 .412 [10.46] .332 [8.43] .200 [5.08] .106 [2.69] — 5-103168-1 5-102618-1 8-87589-6 8 .512 [13.00] .432 [10.97] .300 [7.62] .106 [2.69] — 5-103168-2 5-102618-2 8-87589-5 10 .612 [15.54] .532 [13.51] .400 [10.16] .206 [5.23] — 5-103168-3 5-102618-3 5-87589-1 12 .712 [18.08] .632 [16.05] .500 [12.70] .206 [5.23] — 5-103168-4 5-102618-4 5-87589-2 14 .812 [20.62] .732 [18.59] .600 [15.24] .306 [7.77] — 5-103168-5 5-102618-5 5-87589-3 16 .912 [23.16] .832 [21.13] .700 [17.78] .306 [7.77] — 5-103168-6 5-102618-6 5-87589-4 Accessories 18 1.012 [25.70 .932 [23.67] .800 [20.32] .406 [10.31] — 5-103168-7 5-102618-7 5-87589-5 Barrier Insert — page 204 20 1.112 [28.24] 1.032 [26.21] .900 [22.86] .106 [2.69] .806 [20.47] 5-103168-8 5-102618-8 5-87589-6 22 1.212 [30.78] 1.132 [28.75] 1.000 [25.40] .106 [2.69] .906 [23.01] 5-103168-9 5-102618-9 5-87589-7 24 1.312 [33.32] 1.232 [31.29] 1.100 [27.94] .106 [2.69] 1.006 [25.55] 6-103168-0 6-102618-0 5-87589-8 26 1.412 [35.86] 1.332 [33.83] 1.200 [30.48] .106 [2.69] 1.106 [28.09] 6-103168-1 6-102618-1 5-87589-9 28 1.512 [38.40] 1.432 [36.37] 1.300 [33.02] .106 [2.69] 1.206 [30.63] 6-103168-2 6-102618-2 6-87589-0 30 1.612 [40.94] 1.532 [38.91] 1.400 [35.56] .106 [2.69] 1.306 [33.17] 6-103168-3 6-102618-3 6-87589-1 Technical Documents — page 276 See mating connector for applicable product and application specifications. No. of Pos. A 5 Post Plating/Part Nos. Plating A Plating B Plating C Note: All part numbers are RoHS compliant. 117 Catalog 1307819 Revised 8-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 AMPMODU Interconnection System Standard Profile Headers—Shrouded, PageHead_12_HelvCdBd (Continued) with .066 [1.68] End Dimension, Double-Row, .100 x .100 [2.54 x 2.54] Centerline (Continued) Standard Profile Headers, Shrouded No. of Positions A B Dimensions C D E Post Plating/Part Nos. Plating A Plating B Plating C 32 1.712 [43.48] 1.632 [41.45] 1.500 [38.10] .106 [2.69] 1.406 [35.71] 6-103168-4 6-102618-4 6-87589-2 34 1.812 [46.02] 1.732 [43.99] 1.600 [40.64] .106 [2.69] 1.506 [38.25] 6-103168-5 6-102618-5 6-87589-3 36 1.912 [48.56] 1.832 [46.53] 1.700 [43.18] .106 [2.69] 1.606 [40.79] 6-103168-6 6-102618-6 6-87589-4 38 2.012 [51.10] 1.932 [49.07] 1.800 [45.72] .106 [2.69] 1.706 [43.33] 6-103168-7 6-102618-7 6-87589-5 40 2.112 [53.64] 2.032 [51.61] 1.900 [48.26] .106 [2.69] 1.806 [45.87] 6-103168-8 6-102618-8 6-87589-6 42 2.212 [56.18] 2.132 [54.15] 2.000 [50.80] .106 [2.69] 1.906 [48.41] 6-103168-9 6-102618-9 6-87589-7 44 2.312 [58.72] 2.232 [56.69] 2.100 [53.34] .106 [2.69] 2.006 [50.95] 7-103168-0 7-102618-0 6-87589-8 46 2.412 [61.26] 2.332 [59.23] 2.200 [55.88] .106 [2.69] 2.106 [53.49] 7-103168-1 7-102618-1 6-87589-9 48 2.512 [63.80] 2.432 [61.77] 2.300 [58.42] .106 [2.69] 2.206 [56.03] 7-103168-2 7-102618-2 7-87589-0 50 2.612 [66.34] 2.532 [64.31] 2.400 [60.96] .106 [2.69] 2.306 [58.57] 7-103168-3 7-102618-3 7-87589-1 52 2.712 [68.88] 2.632 [66.85] 2.500 [63.50] .106 [2.69] 2.406 [61.11] 7-103168-4 7-102618-4 7-87589-2 54 2.812 [71.42] 2.732 [69.39] 2.600 [66.04] .106 [2.69] 2.506 [63.65] 7-103168-5 7-102618-5 7-87589-3 56 2.912 [73.96] 2.832 [71.93] 2.700 [68.58] .106 [2.69] 2.606 [66.19] 7-103168-6 7-102618-6 7-87589-4 58 3.012 [76.50] 2.932 [74.47] 2.800 [71.12] .106 [2.69] 2.706 [68.73] 7-103168-7 7-102618-7 7-87589-5 60 3.112 [79.04] 3.032 [77.01] 2.900 [73.66] .106 [2.69] 2.806 [71.27] 7-103168-8 7-102618-8 7-87589-6 62 3.212 [81.58] 3.132 [79.55] 3.000 [76.20] .106 [2.69] 2.906 [73.81] 7-103168-9 7-102618-9 7-87589-7 64 3.312 [84.12] 3.232 [82.09] 3.100 [78.74] .106 [2.69] 3.006 [76.35] 8-103168-0 8-102618-0 7-87589-8 66 3.412 [86.66] 3.332 [84.63] 3.200 [81.28] .106 [2.69] 3.106 [78.89] 8-103168-1 8-102618-1 7-87589-9 68 3.512 [89.20] 3.432 [87.17] 3.300 [83.82] .106 [2.69] 3.206 [81.43] 8-103168-2 8-102618-2 8-87589-0 70 3.612 [91.74] 3.532 [89.71] 3.400 [86.36] .106 [2.69] 3.306 [83.97] 8-103168-3 8-102618-3 8-87589-1 72 3.712 [94.28] 3.632 [92.25] 3.500 [88.90] .106 [2.69] 3.406 [86.51] 8-103168-4 8-102618-4 8-87589-2 74 3.812 [96.82] 3.732 [94.79] 3.600 [91.44] .106 [2.69] 3.506 [89.05] 8-103168-5 8-102618-5 8-87589-3 5 Note: All part numbers are RoHS compliant. 118 Catalog 1307819 Revised 8-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 AMPMODU Interconnection System Standard Profile Headers—Shrouded, with .150 [3.81] End Dimension, Double-Row, .100 x .100 [2.54 x 2.54] Centerline .025 [0.64] Square Straight Post (with Detent Windows) .040 [1.02] (3 Plc.) B .150 [3.81] (2 Plc.) C .100 Typ. [2.54] .200 Ref. [5.08] (Contact Area) .100 [2.54] .400 [10.16] .125 [3.18] .280 [7.11] .090 [2.29] (2 Plc.) A .318 [8.08] .090 [2.29] .240 Typ. [6.10] E D Material and Finish .080 [2.03] .440 [11.18] C .100* Typ. [2.54] Standard Profile Headers, Shrouded Housing — Black thermoplastic, 94V-0 rated Posts — Phosphor bronze, plated as follows: Plating A — Duplex plated .000030 [0.00076] gold on contact area, .000100-.000200 [0.00254-0.00508] tin on solder area, with entire post underplated .000050 [0.00127] nickel Plating B — Duplex plated .000015 [0.00038] gold on contact area, .000100-.000200 [0.00254-0.00508] tin on solder area, with entire post underplated .000050 [0.00127] nickel Plating C — .000100-.000200 [0.00254-0.00508] tin over .000050 [0.00127] nickel on entire post .100* [2.54] .035±.003 Dia. Typ. [0.89±0.08] Recommended PC Board Hole Layout (for .055 [1.40] min. thick PC board) *±.003 [±0.08] tolerances not to accumulate within one connector pattern. Related Product Data 5 Mateable Connectors AMPMODU MTE Receptacles — pages 232, 233, 235 (used with coupling shroud on page 241) AMPMODU Wire-Applied Receptacles — pages 216-219 No. of Pos. A B 6 .580 [14.73] .500 [12.70] 8 .680 [17.27] .600 [15.24] Accessories 10 .780 [19.81] Barrier Insert — page 204 12 Technical Documents — page 276 See mating connector for applicable product and application specifications. Dimensions C Post Plating/Part Nos. Plating A Plating B Plating C D E .200 [5.08] .190 [4.83] — 5-103169-1 5-102619-1 8-87587-3 .300 [7.62] .190 [4.83] — 5-103169-2 5-102619-2 8-87587-4 .700 [17.78] .400 [10.16] .290 [7.37] — 5-103169-3 5-102619-3 5-87587-1 .880 [22.35] .800 [20.32] .500 [12.70] .290 [7.37] — 5-103169-4 5-102619-4 5-87587-2 14 .980 [24.89] .900 [22.86] .600 [15.24] .390 [9.91] — 5-103169-5 5-102619-5 5-87587-3 16 1.080 [27.43] 1.000 [25.40] .700 [17.78] .390 [9.91] — 5-103169-6 5-102619-6 5-87587-4 18 1.180 [29.97] 1.100 [27.94] .800 [20.32] .490 [12.45] — 5-103169-7 5-102619-7 5-87587-5 20 1.280 [32.51] 1.200 [30.48] .900 [22.86] .190 [4.83] .890 [22.61] 5-103169-8 5-102619-8 5-87587-6 22 1.380 [35.05] 1.300 [33.02] 1.000 [25.40] .190 [4.83] .990 [25.15] 5-103169-9 5-102619-9 5-87587-7 24 1.480 [37.59] 1.400 [35.56] 1.100 [27.94] .190 [4.83] 1.090 [27.69] 6-103169-0 6-102619-0 5-87587-8 26 1.580 [40.13] 1.500 [38.10] 1.200 [30.48] .190 [4.83] 1.190 [30.23] 6-103169-1 6-102619-1 5-87587-9 28 1.680 [42.67] 1.600 [40.64] 1.300 [33.02] .190 [4.83] 1.290 [32.77] 6-103169-2 6-102619-2 6-87587-0 30 1.780 [45.21] 1.700 [43.18] 1.400 [35.56] .190 [4.83] 1.390 [35.31] 6-103169-3 6-102619-3 6-87587-1 Note: All part numbers are RoHS compliant. 119 Catalog 1307819 Revised 8-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 AMPMODU Interconnection System Standard Profile Headers—Shrouded, with .150 [3.81] End Dimension, Double-Row, .100 x .100 [2.54 x 2.54] Centerline (Continued) No. of Pos. Standard Profile Headers, Shrouded 32 34 36 38 40 42 44 46 48 50 52 54 56 58 60 62 64 66 68 70 72 A 1.880 [47.75] 1.980 [50.29] 2.080 [52.83] 2.180 [55.37] 2.280 [57.91] 2.380 [60.45] 2.480 [62.99] 2.580 [65.53] 2.680 [68.07] 2.780 [70.61] 2.880 [73.15] 2.980 [75.69] 3.080 [78.23] 3.180 [80.77] 3.280 [83.31] 3.380 [85.85] 3.480 [88.39] 3.580 [90.93] 3.680 [93.47] 3.780 [96.01] 3.880 [98.55] B 1.800 [45.72] 1.900 [48.26] 2.000 [50.80] 2.100 [53.34] 2.200 [55.88] 2.300 [58.42] 2.400 [60.96] 2.500 [63.50] 2.600 [66.04] 2.700 [68.58] 2.800 [71.12] 2.900 [73.66] 3.000 [76.20] 3.100 [78.74] 3.200 [81.28] 3.300 [83.82] 3.400 [86.36] 3.500 [88.90] 3.600 [91.44] 3.700 [93.98] 3.800 [96.52] Dimensions C 1.500 [38.10] 1.600 [40.64] 1.700 [43.18] 1.800 [45.72] 1.900 [48.26] 2.000 [50.80] 2.100 [53.34] 2.200 [55.88] 2.300 [58.42] 2.400 [60.96] 2.500 [63.50] 2.600 [66.04] 2.700 [68.58] 2.800 [71.12] 2.900 [73.66] 3.000 [76.20] 3.100 [78.74] 3.200 [81.28] 3.300 [83.82] 3.400 [86.36] 3.500 [88.90] D .190 [4.83] .190 [4.83] .190 [4.83] .190 [4.83] .190 [4.83] .190 [4.83] .190 [4.83] .190 [4.83] .190 [4.83] .190 [4.83] .190 [4.83] .190 [4.83] .190 [4.83] .190 [4.83] .190 [4.83] .190 [4.83] .190 [4.83] .190 [4.83] .190 [4.83] .190 [4.83] .190 [4.83] E 1.490 [37.85] 1.590 [40.39] 1.690 [42.93] 1.790 [45.47] 1.890 [48.01] 1.990 [50.55] 2.090 [53.09] 2.190 [55.63] 2.290 [58.17] 2.390 [60.71] 2.490 [63.25] 2.590 [65.79] 2.690 [68.33] 2.790 [70.87] 2.890 [73.41] 2.990 [75.95] 3.090 [78.49] 3.190 [81.03] 3.290 [83.57] 3.390 [86.11] 3.490 [88.65] Post Plating/Part Nos. Plating A Plating B Plating C 6-103169-4 6-102619-4 6-87587-2 6-103169-5 6-102619-5 6-87587-3 6-103169-6 6-102619-6 6-87587-4 6-103169-7 6-102619-7 6-87587-5 6-103169-8 6-102619-8 6-87587-6 6-103169-9 6-102619-9 6-87587-7 7-103169-0 7-102619-0 6-87587-8 7-103169-1 7-102619-1 6-87587-9 7-103169-2 7-102619-2 7-87587-0 7-103169-3 7-102619-3 7-87587-1 7-103169-4 7-102619-4 7-87587-2 7-103169-5 7-102619-5 7-87587-3 7-103169-6 7-102619-6 7-87587-4 7-103169-7 7-102619-7 7-87587-5 7-103169-8 7-102619-8 7-87587-6 7-103169-9 7-102619-9 7-87587-7 8-103169-0 8-102619-0 7-87587-8 8-103169-1 8-102619-1 7-87587-9 8-103169-2 8-102619-2 8-87587-0 8-103169-3 8-102619-3 8-87587-1 8-103169-4 8-102619-4 8-87587-2 5 Note: All part numbers are RoHS compliant. 120 Catalog 1307819 Revised 8-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 AMPMODU Interconnection System Standard Profile Headers—Shrouded, with .150 [3.81] End Dimension, Double-Row, .100 x .100 [2.54 x 2.54] Centerline (Continued) .025 [0.64] Square Straight Post (with Plastic Holddowns) .150 [3.81] (2 Plc.) .040 [1.02] (3 Plc.) B C .100 Typ. [2.54] .200 Ref. [5.08] (Contact Area) .318 [8.08] .125 [3.18] .100 [2.54] .400 [10.16] .015 [.020] 0.38 [0.51] [ ] .280 [7.11] .090 [2.29] (2 Plc.) .050 (2 Plc.) [1.27] A .090 [2.29] .180 [4.57] Material and Finish Housing — Black thermoplastic, 94V-0 rated Posts — Phosphor bronze, duplex plated .000015 [0.00038] gold on contact area, .000100-.000200 [0.00254-0.00508] tin on solder area, with entire post underplated .000050 [0.00127] nickel .440 [11.18] C .100* [2.54] .100* Typ. [2.54] Standard Profile Headers, Shrouded .140 [3.56] (2 Plc.) Related Product Data Mateable Connectors AMPMODU MTE Receptacles — pages 232, 233, 235 (used with coupling shroud on page 241) AMPMODU Wire-Applied Receptacles — pages 216-219 .040±.003 Dia. Typ. Dia. Typ. .093+.004 [1.02±0.08] -.000 .093 2.36+0.10 -.000 Recommended PC Board Hole Layout 2.36 [ ] (for .055 [1.40] min. thick PC board) *±.003 [±0.08] tolerances not to accumulate within one connector pattern. Accessories Barrier Insert — page 204 Technical Documents — page 276 See mating connector for applicable product and application specifications. No. of Pos. 6 10 12 14 16 18 20 22 24 26 30 32 34 36 40 42 48 50 A .580 [14.73] .780 [19.81] .880 [22.35] .980 [24.89] 1.080 [27.43] 1.180 [29.97] 1.280 [32.51] 1.380 [35.05] 1.480 [37.59] 1.580 [40.13] 1.780 [45.21] 1.880 [47.75] 1.980 [50.29] 2.080 [52.83] 2.280 [57.91] 2.380 [60.45] 2.680 [68.07] 2.780 [70.61] Dimensions B .500 [12.70] .700 [17.78] .800 [20.32] .900 [22.86] 1.000 [25.40] 1.100 [27.94] 1.200 [30.48] 1.300 [33.02] 1.400 [35.56] 1.500 [38.10] 1.700 [43.18] 1.800 [45.72] 1.900 [48.26] 2.000 [50.80] 2.200 [55.88] 2.300 [58.42] 2.600 [66.04] 2.700 [68.58] C .200 [5.08] .400 [10.16] .500 [12.70] .600 [15.24] .700 [17.78] .800 [20.32] .900 [22.86] 1.000 [25.40] 1.100 [27.94] 1.200 [30.48] 1.400 [35.56] 1.500 [38.10] 1.600 [40.64] 1.700 [43.18] 1.900 [48.26] 2.000 [50.80] 2.300 [58.42] 2.400 [60.96] 5 Part Nos. Plating A 5-104317-1 5-104317-2 5-104317-3 5-104317-4 6-104317-6 5-104317-5 5-104317-6 5-104317-7 5-104317-8 5-104317-9 6-104317-0 6-104317-1 6-104317-8 6-104317-7 6-104317-2 6-104317-5 6-104317-3 6-104317-4 Note: All part numbers are RoHS compliant. 121 Catalog 1307819 Revised 8-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 AMPMODU Interconnection System Standard Profile Headers—Shrouded, with .066 [1.68] End Dimension, Double-Row, .100 x .100 [2.54 x 2.54] Centerline .025 [0.64] Square Right-Angle Post (with Detent Windows) .040 [1.02] (3 Plc.) B .066 [1.68] (2 Plc.) C .100 Typ. [2.54] .200 Ref. [5.08] (Contact Area) .318 [8.08] .100 [2.54] .280 [7.11] .400 [10.16] .013 [0.33] (Standoffs) .135 [3.43] .090 [2.29] (2 Plc.) A .157 [3.99] Material and Finish Standard Profile Headers, Shrouded Housing — Black thermoplastic, 94V-0 rated Posts — Phosphor bronze, plated as follows: Plating A — Duplex plated .000030 [0.00076] gold on contact area, .000100-.000200 [0.00254-0.00508] tin on solder area, with entire post underplated .000050 [0.00127] nickel Plating B — Duplex plated .000015 [0.00038] gold on contact area, .000100-.000200 [0.00254-0.00508] tin on solder area, with entire post underplated .000050 [0.00127] nickel Plating C — .000100-.000200 [0.00254-0.00508] tin over .000050 [0.00127] nickel on entire post .100 [2.54] .240 [6.10] Typ. E D .639 [16.23] .489 [12.42] .080 [2.03] C .100* Typ. [2.54] Related Product Data 5 Mateable Connectors AMPMODU Board Mount Receptacles — pages 176, 179, 180 AMPMODU Wire-Applied Receptacles — pages 216-219 AMPMODU MTE Receptacles — pages 228, 229, 234 AMPMODU MT Receptacles — pages 256, 257 Technical Documents — page 276 See mating connector for applicable product and application specifications. .100* [2.54] .035±.003 Dia. Typ. [0.89±0.08] Recommended PC Board Hole Layout (for .055 [1.40] min. thick PC board) *±.003 [±0.08] tolerances not to accumulate within one connector pattern. No. of Pos. A B Dimensions C 6 8 10 12 14 16 18 20 22 24 26 28 30 .412 [10.46] .512 [13.00] .612 [15.54] .712 [18.08] .812 [20.62] .912 [23.16] 1.012 [25.70] 1.112 [28.24] 1.212 [30.78] 1.312 [33.32] 1.412 [35.86] 1.512 [38.40] 1.612 [40.94] .332 [8.43] .432 [10.97] .532 [13.51] .632 [16.05] .732 [18.59] .832 [21.13] .932 [23.67] 1.032 [26.21] 1.132 [28.75] 1.232 [31.29] 1.332 [33.83] 1.432 [36.37] 1.532 [38.91] .200 [5.08] .300 [7.62] .400 [10.16] .500 [12.70] .600 [15.24] .700 [17.78] .800 [20.32] .900 [22.86] 1.000 [25.40] 1.100 [27.94] 1.200 [30.48] 1.300 [33.02] 1.400 [35.56] D .106 [2.69] .106 [2.69] .206 [5.23] .206 [5.23] .306 [7.77] .306 [7.77] .406 [10.31] .106 [2.69] .106 [2.69] .106 [2.69] .106 [2.69] .106 [2.69] .106 [2.69] E — — — — — — — .806 [20.47] .906 [23.01] 1.006 [25.55] 1.106 [28.09] 1.206 [30.63] 1.306 [33.17] Post Plating/Part Nos. Plating A Plating B Plating C 5-103166-1 5-103166-2 5-103166-3 5-103166-4 5-103166-5 5-103166-6 5-103166-7 5-103166-8 5-103166-9 6-103166-0 6-103166-1 6-103166-2 6-103166-3 5-102617-1 5-102617-2 5-102617-3 5-102617-4 5-102617-5 5-102617-6 5-102617-7 5-102617-8 5-102617-9 6-102617-0 6-102617-1 6-102617-2 6-102617-3 8-87579-5 5-87579-1 5-87579-2 5-87579-3 5-87579-4 5-87579-5 5-87579-6 5-87579-7 5-87579-8 5-87579-9 6-87579-0 6-87579-1 6-87579-2 Note: All part numbers are RoHS compliant. 122 Catalog 1307819 Revised 8-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 AMPMODU Interconnection System Standard Profile Headers—Shrouded, with .066 [1.68] End Dimension, Double-Row, .100 x .100 [2.54 x 2.54] Centerline (Continued) A B Dimensions C D E 32 34 36 38 40 42 44 46 48 50 52 54 56 58 60 62 64 66 68 70 72 74 1.712 [43.48] 1.812 [46.02] 1.912 [48.56] 2.012 [51.10] 2.112 [53.64] 2.212 [56.18] 2.312 [58.72] 2.412 [61.26] 2.512 [63.80] 2.612 [66.34] 2.712 [68.88] 2.812 [71.42] 2.912 [73.96] 3.012 [76.50] 3.112 [79.04] 3.212 [81.58] 3.312 [84.12] 3.412 [86.66] 3.512 [89.20] 3.612 [91.74] 3.712 [94.28] 3.812 [96.82] 1.632 [41.45] 1.732 [43.99] 1.832 [46.53] 1.932 [49.07] 2.032 [51.61] 2.132 [54.15] 2.232 [56.69] 2.332 [59.23] 2.432 [61.77] 2.532 [64.31] 2.632 [66.85] 2.732 [69.39] 2.832 [71.93] 2.932 [74.47] 3.032 [77.01] 3.132 [79.55] 3.232 [82.09] 3.332 [84.63] 3.432 [87.17] 3.532 [89.71] 3.632 [92.25] 3.732 [94.79] 1.500 [38.10] 1.600 [40.64] 1.700 [43.18] 1.800 [45.72] 1.900 [48.26] 2.000 [50.80] 2.100 [53.34] 2.200 [55.88] 2.300 [58.42] 2.400 [60.96] 2.500 [63.50] 2.600 [66.04] 2.700 [68.58] 2.800 [71.12] 2.900 [73.66] 3.000 [76.20] 3.100 [78.74] 3.200 [81.28] 3.300 [83.82] 3.400 [86.36] 3.500 [88.90] 3.600 [91.44] .106 [2.69] .106 [2.69] .106 [2.69] .106 [2.69] .106 [2.69] .106 [2.69] .106 [2.69] .106 [2.69] .106 [2.69] .106 [2.69] .106 [2.69] .106 [2.69] .106 [2.69] .106 [2.69] .106 [2.69] .106 [2.69] .106 [2.69] .106 [2.69] .106 [2.69] .106 [2.69] .106 [2.69] .106 [2.69] 1.406 [35.71] 1.506 [38.25] 1.606 [40.79] 1.706 [43.33] 1.806 [45.87] 1.906 [48.41] 2.006 [50.95] 2.106 [53.49] 2.206 [56.03] 2.306 [58.57] 2.406 [61.11] 2.506 [63.65] 2.606 [66.19] 2.706 [68.73] 2.806 [71.27] 2.906 [73.81] 3.006 [76.35] 3.106 [78.89] 3.206 [81.43] 3.306 [83.97] 3.406 [86.51] 3.506 [89.05] Post Plating/Part Nos. Plating A Plating B Plating C 6-103166-4 6-103166-5 6-103166-6 6-103166-7 6-103166-8 6-103166-9 7-103166-0 7-103166-1 7-103166-2 7-103166-3 7-103166-4 7-103166-5 7-103166-6 7-103166-7 7-103166-8 7-103166-9 8-103166-0 8-103166-1 8-103166-2 8-103166-3 8-103166-4 8-103166-5 6-102617-4 6-102617-5 6-102617-6 6-102617-7 6-102617-8 6-102617-9 7-102617-0 7-102617-1 7-102617-2 7-102617-3 7-102617-4 7-102617-5 7-102617-6 7-102617-7 7-102617-8 7-102617-9 8-102617-0 8-102617-1 8-102617-2 8-102617-3 8-102617-4 8-102617-5 6-87579-3 6-87579-4 6-87579-5 6-87579-6 6-87579-7 6-87579-8 6-87579-9 7-87579-0 7-87579-1 7-87579-2 7-87579-3 7-87579-4 7-87579-5 7-87579-6 7-87579-7 7-87579-8 7-87579-9 8-87579-0 8-87579-1 8-87579-2 8-87579-3 8-87579-4 Standard Profile Headers, Shrouded No. of Pos. 5 Note: All part numbers are RoHS compliant. 123 Catalog 1307819 Revised 8-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 AMPMODU Interconnection System Standard Profile Headers—Shrouded, with .150 [3.81] End Dimension, Double-Row, .100 x .100 [2.54 x 2.54] Centerline .025 [0.64] Square Right-Angle Post (with Detent Windows) .040 [1.02] (3 Plc.) B .150 [3.81] (2 Plc.) C .200 Ref. [5.08] (Contact Area) .100 [2.54] .100 Typ. [2.54] .400 [10.16] .280 [7.11] .013 [0.33] (Standoffs) .135 [3.43] A Housing — Black thermoplastic, 94V-0 rated Posts — Phosphor bronze, plated as follows: Plating A — Duplex plated .000030 [0.00076] gold on contact area, .000100-.000200 [0.00254-0.00508] tin on solder area, with entire post underplated .000050 [0.00127] nickel Plating B — Duplex plated .000015 [0.00038] gold on contact area, .000100-.000200 [0.00254-0.00508] tin on solder area, with entire post underplated .000050 [0.00127] nickel Plating C — .000100-.000200 [0.00254-0.00508] tin over .000050 [0.00127] nickel on entire post Standard Profile Headers, Shrouded .289 [7.34] .090 [2.29] (2 Plc.) Material and Finish .157 [3.99] .240 [6.10] Typ. E D .639 [16.23] .489 [12.42] .100 [2.54] .080 [2.03] C .100* Typ. [2.54] Related Product Data Mateable Connectors AMPMODU MTE Receptacles — pages 232, 233, 235 (used with coupling shroud on page 241) AMPMODU Wire-Applied Receptacles — pages 216-219 5 .318 [8.08] .100* [2.54] .035±.003 Dia. Typ. [0.89±0.08] Recommended PC Board Hole Layout (for .055 [1.40] min. thick PC board) *±.003 [±0.08] tolerances not to accumulate within one connector pattern. Technical Documents — page 276 See mating connector for applicable product and application specifications. No. of Pos. A B Dimensions C 8 10 12 14 16 18 20 22 24 26 28 30 .680 [17.27] .780 [19.81] .880 [22.35] .980 [24.89] 1.080 [27.43] 1.180 [29.97] 1.280 [32.51] 1.380 [35.05] 1.480 [37.59] 1.580 [40.13] 1.680 [42.67] 1.780 [45.21] .600 [15.24] .700 [17.78] .800 [20.32] .900 [22.86] 1.000 [25.40] 1.100 [27.94] 1.200 [30.48] 1.300 [33.02] 1.400 [35.56] 1.500 [38.10] 1.600 [40.64] 1.700 [43.18] .300 [7.62] .400 [10.16] .500 [12.70] .600 [15.24] .700 [17.78] .800 [20.32] .900 [22.86] 1.000 [25.40] 1.100 [27.94] 1.200 [30.48] 1.300 [33.02] 1.400 [35.56] D .190 [4.83] .290 [7.37] .290 [7.37] .390 [9.91] .390 [9.91] .490 [12.45] .190 [4.83] .190 [4.83] .190 [4.83] .190 [4.83] .190 [4.83] .190 [4.83] E — — — — — — .890 [22.61] .990 [25.15] 1.090 [27.69] 1.190 [30.23] 1.290 [32.77] 1.390 [35.31] Post Plating/Part Nos. Plating A Plating B Plating C 5-103167-1 5-103167-2 5-103167-3 5-103167-4 5-103167-5 5-103167-6 5-103167-7 5-103167-8 5-103167-9 6-103167-0 6-103167-1 6-103167-2 5-102570-2 5-102570-3 5-102570-4 5-102570-5 5-102570-6 5-102570-7 5-102570-8 5-102570-9 6-102570-0 6-102570-1 6-102570-2 6-102570-3 5-87577-1 5-87577-2 5-87577-3 5-87577-4 5-87577-5 5-87577-6 5-87577-7 5-87577-8 5-87577-9 6-87577-0 6-87577-1 6-87577-2 Note: All part numbers are RoHS compliant. 124 Catalog 1307819 Revised 8-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 AMPMODU Interconnection System Standard Profile Headers—Shrouded, with .150 [3.81] End Dimension, Double-Row, .100 x .100 [2.54 x 2.54] Centerline (Continued) A B Dimensions C D E 32 34 36 38 40 42 44 46 48 50 52 54 56 58 60 62 64 66 68 70 72 1.880 [47.75] 1.980 [50.29] 2.080 [52.83] 2.180 [55.37] 2.280 [57.91] 2.380 [60.45] 2.480 [62.99] 2.580 [65.53] 2.680 [68.07] 2.780 [70.61] 2.880 [73.15] 2.980 [75.69] 3.080 [78.23] 3.180 [80.77] 3.280 [83.31] 3.380 [85.85] 3.480 [88.39] 3.580 [90.93] 3.680 [93.47] 3.780 [96.01] 3.880 [98.55] 1.800 [45.72] 1.900 [48.26] 2.000 [50.80] 2.100 [53.34] 2.200 [55.88] 2.300 [58.42] 2.400 [60.96] 2.500 [63.50] 2.600 [66.04] 2.700 [68.58] 2.800 [71.12] 2.900 [73.66] 3.000 [76.20] 3.100 [78.74] 3.200 [81.28] 3.300 [83.82] 3.400 [86.36] 3.500 [88.90] 3.600 [91.44] 3.700 [93.98] 3.800 [96.52] 1.500 [38.10] 1.600 [40.64] 1.700 [43.18] 1.800 [45.72] 1.900 [48.26] 2.000 [50.80] 2.100 [53.34] 2.200 [55.88] 2.300 [58.42] 2.400 [60.96] 2.500 [63.50] 2.600 [66.04] 2.700 [68.58] 2.800 [71.12] 2.900 [73.66] 3.000 [76.20] 3.100 [78.74] 3.200 [81.28] 3.300 [83.82] 3.400 [86.36] 3.500 [88.90] .190 [4.83] .190 [4.83] .190 [4.83] .190 [4.83] .190 [4.83] .190 [4.83] .190 [4.83] .190 [4.83] .190 [4.83] .190 [4.83] .190 [4.83] .190 [4.83] .190 [4.83] .190 [4.83] .190 [4.83] .190 [4.83] .190 [4.83] .190 [4.83] .190 [4.83] .190 [4.83] .190 [4.83] 1.490 [37.85] 1.590 [40.39] 1.690 [42.93] 1.790 [45.47] 1.890 [48.01] 1.990 [50.55] 2.090 [53.09] 2.190 [55.63] 2.290 [58.17] 2.390 [60.71] 2.490 [63.25] 2.590 [65.79] 2.690 [68.33] 2.790 [70.87] 2.890 [73.41] 2.990 [75.95] 3.090 [78.49] 3.190 [81.03] 3.290 [83.57] 3.390 [86.11] 3.490 [88.65] Post Plating/Part Nos. Plating A Plating B Plating C 6-103167-3 6-103167-4 6-103167-5 6-103167-6 6-103167-7 6-103167-8 6-103167-9 7-103167-0 7-103167-1 7-103167-2 7-103167-3 7-103167-4 7-103167-5 7-103167-6 7-103167-7 7-103167-8 7-103167-9 8-103167-0 8-103167-1 8-103167-2 8-103167-3 6-102570-4 6-102570-5 6-102570-6 6-102570-7 5-102570-1 6-102570-8 6-102570-9 7-102570-0 7-102570-1 7-102570-2 7-102570-3 7-102570-4 7-102570-5 7-102570-6 7-102570-7 7-102570-8 7-102570-9 8-102570-0 8-102570-1 8-102570-2 8-102570-3 6-87577-3 6-87577-4 6-87577-5 6-87577-6 6-87577-7 6-87577-8 6-87577-9 7-87577-0 7-87577-1 7-87577-2 7-87577-3 7-87577-4 7-87577-5 7-87577-6 7-87577-7 7-87577-8 7-87577-9 8-87577-0 8-87577-1 8-87577-2 8-87577-3 Standard Profile Headers, Shrouded No. of Pos. 5 Note: All part numbers are RoHS compliant. 125 Catalog 1307819 Revised 8-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 AMPMODU Interconnection System Standard Profile Headers—Shrouded, with .066 [1.68] End Dimension, Double-Row, .100 x .100 [2.54 x 2.54] Centerline .025 [0.64] Square Right-Angle Post (with Pin Protection on 3 Sides) .639 [16.23] .489 [12.42] .200 Ref. [5.08] (Contact Area) .040 [1.02] (2 Plc.) Material and Finish Standard Profile Headers, Shrouded Housing — Black thermoplastic, 94V-0 rated Posts — Phosphor bronze, plated as follows: Plating A — Duplex plated .000030 [0.00076] gold on contact area, .000100-.000200 [0.00254-0.00508] tin on solder area, with entire post underplated .000050 [0.00127] nickel Plating B — Duplex plated .000015 [0.00038] gold on contact area, .000100-.000200 [0.00254-0.00508] tin on solder area, with entire post underplated .000050 [0.00127] nickel Plating C — .000100-.000200 [0.00254-0.00508] tin over .000050 [0.00127] nickel on entire post B .066 [1.68] (2 Plc.) .100 Typ. [2.54] Technical Documents — page 276 See mating connector for applicable product and application specifications. .289 [7.34] .125 [3.18] .100 [2.54] .090 [2.29] (2 Plc.) A .157 [3.99] .100 [2.54] C .100* [2.54] Related Product Data 5 .318 [8.08] .361 .280 [9.17] [7.11] .100* [2.54] Mateable Connectors AMPMODU Board Mount Receptacles — pages 176, 179, 180 AMPMODU Wire-Applied Receptacles — pages 216, 217 AMPMODU MTE Receptacles — pages 228, 229, 234 AMPMODU MT Receptacles — pages 256, 257 .100 [2.54] C .035±.003 Dia. Typ. [0.89±0.08] Recommended PC Board Hole Layout (for .055 [1.40] min. thick PC board) *±.003 [±0.08] tolerances not to accumulate within one connector pattern. No. of Pos. 6 8 10 12 14 16 18 20 24 26 30 34 40 50 52 54 60 A .412 [10.46] .512 [13.00] .612 [15.54] .712 [18.08] .812 [20.62] .912 [23.16] 1.012 [25.70] 1.112 [28.24] 1.312 [33.32] 1.412 [35.86] 1.612 [40.94] 1.812 [46.02] 2.112 [53.64] 2.612 [66.34] 2.712 [68.88] 2.812 [71.42] 3.112 [79.04] Dimensions B .332 [8.43] .432 [10.97] .532 [13.51] .632 [16.05] .732 [18.59] .832 [21.13] .932 [23.67] 1.032 [26.21] 1.232 [31.29] 1.332 [33.83] 1.532 [38.91] 1.732 [43.99] 2.032 [51.61] 2.532 [64.31] 2.632 [66.85] 2.732 [69.36] 3.032 [77.01] C .200 [5.08] .300 [7.62] .400 [10.16] .500 [12.70] .600 [15.24] .700 [17.78] .800 [20.32] .900 [22.86] 1.100 [27.94] 1.200 [30.48] 1.400 [35.56] 1.600 [40.64] 1.900 [48.26] 2.400 [60.96] 2.500 [63.50] 2.600 [66.04] 2.900 [73.66] Plating A 5-103164-1 5-103164-2 5-103164-3 5-103164-4 5-103164-5 5-103164-6 5-103164-7 5-103164-8 6-103164-0 6-103164-1 6-103164-3 6-103164-5 6-103164-8 7-103164-3 7-103164-4 — 7-103164-8 Post Plating/Part Nos. Plating B 5-102055-2 5-102055-3 5-102055-4 5-102055-5 5-102055-6 5-102055-7 5-102055-8 5-102055-1 6-102055-0 — 6-102055-3 6-102055-5 6-102055-8 7-102055-3 — 7-102055-5 7-102055-8 Plating C 8-87572-5 5-87572-1 5-87572-2 5-87572-3 5-87572-4 5-87572-5 5-87572-6 5-87572-7 — 6-87572-0 — 6-87572-4 6-87572-7 7-87572-2 — — 7-87572-7 Note: All part numbers are RoHS compliant. 126 Catalog 1307819 Revised 8-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 AMPMODU Interconnection System Standard Profile Headers—Shrouded, with .150 [3.81] End Dimension, Double-Row, .100 x .100 [2.54 x 2.54] Centerline .025 [0.64] Square Right-Angle Post (with Pin Protection on 3 Sides) .639 [16.23] .489 [12.42] Material and Finish .040 [1.02] (2 Plc.) .200 Ref. [5.08] (Contact Area) B C .150 [3.81] (2 Plc.) .361 [9.17] .100 Typ. [2.54] .361 [9.17] .318 [8.08] .289 [7.34] .280 [7.11] .100 [2.54] A .090 [2.29] (2 Plc.) Standard Profile Headers, Shrouded Housing — Black thermoplastic, 94V-0 rated Posts — Phosphor bronze, plated as follows: Plating A — Duplex plated .000030 [0.00076] gold on contact area, .000100-.000200 [0.00254-0.00508] tin on solder area, with entire post underplated .000050 [0.00127] nickel Plating B — Duplex plated .000015 [0.00038] gold on contact area, .000100-.000200 [0.00254-0.00508] tin on solder area, with entire post underplated .000050 [0.00127] nickel Plating C — .000100-.000200 [0.00254-0.00508] tin over .000050 [0.00127] nickel on entire post .157 [3.99] .100 [2.54] .125 [3.18] .100* [2.54] Typ. Related Product Data Mateable Connectors AMPMODU Wire-Applied Receptacles — pages 216, 217 5 C .100* [2.54] .035±.003 Dia. Typ. [0.89±0.08] Technical Documents — page 276 Recommended PC Board Hole Layout (for .055 [1.40] min. thick PC board) See mating connector for applicable product and application specifications. *±.003 [±0.08] tolerances not to accumulate within one connector pattern. No. of Pos. 10 12 14 16 18 20 24 26 30 34 40 50 60 A .780 [19.81] .880 [22.35] .980 [24.89] 1.080 [27.43] 1.180 [29.97] 1.280 [32.51] 1.480 [37.59] 1.580 [40.13] 1.780 [45.21] 1.980 [50.29] 2.280 [57.91] 2.780 [70.61] 3.280 [83.31] Dimensions B .700 [17.78] .800 [20.32] .900 [22.86] 1.000 [25.40] 1.100 [27.94] 1.200 [30.48] 1.400 [35.56] 1.500 [38.10] 1.700 [43.18] 1.900 [48.26] 2.200 [55.88] 2.700 [68.58] 3.200 [81.28] C .400 [10.16] .500 [12.70] .600 [15.24] .700 [17.78] .800 [20.32] .900 [22.86] 1.100 [27.94] 1.200 [30.48] 1.400 [35.56] 1.600 [40.64] 1.900 [48.26] 2.400 [60.96] 2.900 [73.66] Plating A 5-103165-1 5-103165-2 5-103165-3 5-103165-4 5-103165-5 5-103165-6 5-103165-8 5-103165-9 6-103165-1 6-103165-3 6-103165-6 7-103165-1 7-103165-6 Post Plating/Part Nos. Plating B 5-102620-1 5-102620-2 5-102620-3 5-102620-4 5-102620-5 5-102620-6 5-102620-8 5-102620-9 6-102620-1 6-102620-3 6-102620-6 7-102620-1 7-102620-6 Plating C 5-87568-1 5-87568-2 5-87568-3 5-87568-4 5-87568-5 5-87568-6 — 5-87568-9 — 6-87568-3 6-87568-6 7-87568-1 7-87568-6 Note: All part numbers are RoHS compliant. 127 Catalog 1307819 Revised 8-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 AMPMODU Interconnection System Standard Profile Headers—Shrouded, with .150 [3.81] End Dimension, Double-Row, .100 x .100 [2.54 x 2.54] Centerline .025 [0.64] Square Right-Angle Post (with Plastic Holddowns) .639 .489 [16.23] [12.42] .150 [3.81] (2 Plc.) Material and Finish Housing — Black thermoplastic, 94V-0 rated Posts — Phosphor bronze, duplex plated .000015 [0.00038] gold on contact area, .000100-.000200 [0.00254-0.00508] tin on solder area, with entire post underplated .000050 [0.00127] nickel .040 [1.02] (2 Plc.) B C .100 Typ. [2.54] [ ] .280 [7.11] .135 [3.43] .090 [2.29] (2 Plc.) .050 (2 Plc.) [1.27] A .451 [11.46] .180 [4.57] .100 [2.54] Standard Profile Headers, Shrouded (Standoffs) Related Product Data Mateable Connectors AMPMODU MTE Receptacles — pages 232, 233, 235 (used with coupling shroud on page 241) AMPMODU Wire-Applied Receptacles — pages 216-219 5 .140 [3.56] (2 Plc.) C .100 Typ. [2.54] .100* [2.54] .040±.003 Dia. Typ. [1.02±0.08] Technical Documents — page 276 .289 [7.34] .318 [8.08] .100 [2.54] .400 [10.16] .015 [.020] 0.38 [0.51] .200 Ref. [5.08] (Contact Area) .451 [11.46] .093+.004 Dia. .09 -.000 2.36+0.10 2.36-.000 (2 Plc.) See mating connector for applicable product and application specifications. [ ] Recommended PC Board Hole Layout (for .055 [1.40] min. thick PC board) *±.003 [±0.08] tolerances not to accumulate within one connector pattern. No. of Pos. 10 12 14 16 20 30 34 40 48 A .780 [19.81] .880 [22.35] .980 [24.89] 1.080 [27.43] 1.280 [32.51] 1.780 [45.21] 1.980 [50.29] 2.280 [57.91] 2.680 [68.07] Dimensions B .700 [17.78] .800 [20.32] .900 [22.86] 1.000 [25.40] 1.200 [30.48] 1.700 [43.18] 1.900 [48.26] 2.200 [55.88] 2.600 [66.04] Part Nos. C .400 [10.16] .500 [12.70] .600 [15.24] .700 [17.78] .900 [20.86] 1.400 [35.56] 1.600 [40.64] 1.900 [48.26] 2.300 [58.42] 5-104319-7 5-104319-8 5-104319-5 5-104319-1 5-104319-2 5-104319-3 5-104319-6 5-104319-4 5-104319-9 Note: All part numbers are RoHS compliant. 128 Catalog 1307819 Revised 8-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 AMPMODU Interconnection System Standard Profile Headers—Shrouded, with .150 [3.81] End Dimension, Double-Row, .100 x .100 [2.54 x 2.54] Centerline (Continued) .025 [0.64] Square Straight Post (with Detent Windows and Mounting Ears) .220 [5.59] Typ. .352 [8.94] Typ. .150 [3.81] Typ. .200 Ref. [5.08] (Contact Area) .062 R [1.57] Typ. .100 [2.54] .280 [7.11] .400 [10.16] .090 [2.29] Typ. .100 Typ. [2.54] C B Material and Finish Housing — Black thermoplastic, 94V-0 rated Posts — Copper alloy, plated .000030 [0.00076] gold over .000050 [0.00127] nickel on entire post .125 [3.18] A F .080 [2.03] Typ. .440 [11.18] Standard Profile Headers, Shrouded Mateable Connectors AMPMODU Wire-Applied Receptacles — pages 216-219 AMPMODU MTE Receptacles — pages 232, 233, 235 (used with coupling shroud on page 241) .318 [8.08] .047 (2 Plc.) [1.19] D E Related Product Data .090 [2.29] .090 [2.29] .240 [6.10] Typ. G Accessories Barrier Insert — page 204 D .100* Typ. [2.54] .352 [8.94] .100* [2.54] 5 .125 Dia. Typ. [3.18] Technical Documents — page 276 See mating connector for applicable product and application specifications. .050 Typ. [1.27] C .035±.003 Dia. Typ. [0.89±0.08] Recommended PC Board Hole Layout (for .055 [1.40] min. thick PC board) *±.003 [±0.08] tolerances not to accumulate within one connector pattern. No. of Pos. 10 14 20 24 26 34 40 50 60 A .780 [19.81] .980 [24.89] 1.280 [32.51] 1.480 [37.59] 1.580 [40.13] 1.980 [50.29] 2.280 [57.91] 2.780 [70.61] 3.280 [83.31] B .700 [17.78] .900 [22.86] 1.200 [30.48] 1.400 [35.56] 1.500 [38.10] 1.900 [48.26] 2.200 [55.88] 2.700 [68.58] 3.200 [81.28] C .400 [10.16] .600 [15.24] .900 [22.86] 1.100 [27.94] 1.200 [30.48] 1.600 [40.64] 1.900 [48.26] 2.400 [60.96] 2.900 [73.66] Dimensions D 1.104 [28.04] 1.304 [33.12] 1.604 [40.74] 1.804 [45.82] 1.904 [48.36] 2.304 [58.52] 2.604 [66.14] 3.104 [78.84] 3.604 [91.54] Part Nos. E 1.304 [33.12] 1.504 [38.20] 1.804 [45.82] 2.004 [50.90] 2.104 [53.44] 2.504 [63.60] 2.804 [71.22] 3.304 [83.92] 3.804 [96.62] F .290 [7.37] .190 [4.83] .190 [4.83] .190 [4.83] .190 [4.83] .190 [4.83] .190 [4.83] .190 [4.83] .190 [4.83] G — — .890 [22.61] 1.090 [27.69] 1.190 [30.23] 1.590 [40.39] 1.890 [48.01] 2.390 [60.71] 2.890 [73.41] 87474-1 87474-9 87474-2 1-87474-3 87474-3 87474-4 87474-6 87474-7 2-87474-6 Note: All part numbers are RoHS compliant. 129 Catalog 1307819 Revised 8-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 AMPMODU Interconnection System Standard Profile Headers—Shrouded Bulkhead Type; with .066 [1.68] End Dimension, Double-Row, .100 x .100 [2.54 x 2.45] Centerline .025 [0.64] Square Straight Post (with Detent Windows and Mounting Ears) .090 [2.29] Typ. E D .352 [8.94] Typ. .220 [5.59] C .100 Typ. [2.54] .080 Typ. [2.03] .047 [1.19] Typ. .100 [2.54] .400 [10.16] .280 [7.11] .040 [1.02] Typ. Standard Profile Headers, Shrouded .062 R [1.57] Typ. .066** Typ. [1.68] B .090 [2.29] Typ. .200 Ref. [5.08] (Contact Area) A Material and Finish Housing — Black thermoplastic, 94V-0 rated Posts — Copper alloy, plated .000030 [0.00076] gold over .000050 [0.00127] nickel on entire post .330 [8.38] .318 [8.08] G F .530 [13.46] .062 [1.57] Thick Panel .880 [22.35] Related Product Data .080 [2.03] Typ. Mateable Connectors AMPMODU Board Mount Receptacles — pages 176, 179, 180 AMPMODU Wire-Applied Receptacles — pages 216-219 AMPMODU MTE Receptacles — pages 228, 229, 234 AMPMODU MT Receptacles — pages 256, 257 5 .240 Typ. [6.10] .288 [7.32] F G .235±.002 [5.97±0.05] ±.002 D [±0.05] ±.002 H [±0.05] .440±.002 [11.18±0.05] Accessories Barrier Insert — page 204 .130-.135 Dia. Typ. [3.30-3.43] .005 [0.13] R Max. (4 Corners) Technical Documents — page 276 See mating connector for applicable product and application specifications. Recommended Panel Cutout **Both mating faces have same end dimension. No. of Pos. 10 12 20 24 26 34 40 50 60 A .612 [15.54] .712 [18.08] 1.112 [28.24] 1.312 [33.32] 1.412 [35.86] 1.812 [46.02] 2.112 [53.64] 2.612 [66.34] 3.112 [79.04] B .532 [13.51] .632 [16.05] 1.032 [26.21] 1.232 [31.29] 1.332 [33.83] 1.732 [43.99] 2.032 [51.61] 2.532 [64.31] 3.032 [77.01] C .400 [10.16] .500 [12.70] .900 [22.86] 1.100 [27.94] 1.200 [30.48] 1.600 [40.64] 1.900 [48.26] 2.400 [60.96] 2.900 [73.66] Dimensions D 1.104 [28.04] 1.204 [30.58] 1.604 [40.74] 1.804 [45.82] 1.904 [48.36] 2.304 [58.52] 2.604 [66.14] 3.104 [78.84] 3.604 [91.54] E 1.304 [33.12] 1.404 [35.66] 1.804 [45.82] 2.004 [50.90] 2.104 [53.44] 2.504 [63.60] 2.804 [71.22] 3.304 [83.92] 3.804 [96.62] F .206 [5.23] .206 [5.23] .106 [2.69] .106 [2.69] .106 [2.69] .106 [2.69] .106 [2.69] .106 [2.69] .106 [2.69] G — — .806 [20.47] 1.006 [25.55] 1.106 [28.09] 1.506 [38.25] 1.806 [45.87] 2.306 [58.57] 2.806 [71.27] H .632 [16.05] .732 [18.59] 1.132 [28.75] 1.332 [33.83] 1.432 [36.37] 1.832 [46.53] 2.132 [54.15] 2.632 [66.85] 3.132 [79.55] Part Nos. 87608-1 87608-2 87608-6 87608-8 87608-9 1-87608-3 1-87608-6 2-87608-1 2-87608-6 Note: All part numbers are RoHS compliant. 130 Catalog 1307819 Revised 8-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 AMPMODU Interconnection System Standard Profile Headers—Shrouded Bulkhead Type; with .150 [3.81] End Dimension, Double-Row, .100 x .100 [2.54 x 2.45] Centerline .025 [0.64] Square Straight Post (with Detent Windows and Mounting Ears) .352 [8.94] Typ. .220 [5.59] .090 [2.29] Typ. D C .100 Typ. [2.54] .080 Typ. [2.03] .047 [1.19] Typ. .100 [2.54] .400 [10.16] .280 [7.11] .040 [1.02] Typ. .062 R [1.57] Typ. .150** Typ. [3.81] B Material and Finish .200 Ref. [5.08] (Contact Area) .530 [13.46] .062 [1.57] Thick Panel .880 [22.35] .080 [2.03] Typ. Mateable Connectors AMPMODU MTE Receptacles — pages 232, 233, 235 (used with coupling shroud on page 241) AMPMODU Wire-Applied Receptacles — pages 216-219 .240 Typ. [6.10] Standard Profile Headers, Shrouded Related Product Data .288 [7.32] F G .235±.002 [5.97±0.05] ±.002 D [±0.05] ±.002 H [±0.05] Accessories .090 [2.29] Typ. A G F Housing — Black thermoplastic, 94V-0 rated Posts — Copper alloy, plated .000030 [0.00076] gold over .000050 [0.00127] nickel on entire post .330 [8.38] .318 [8.08] 5 .440±.002 [11.18±0.05] Barrier Insert — page 204 .130-.135 Dia. Typ. [3.30-3.43] .005 [0.13] R Max. (4 Corners) Technical Documents — page 276 See mating connector for applicable product and application specifications. Recommended Panel Cutout **Both mating faces have same end dimension. No. of Pos. 10 20 24 26 30 32 34 40 50 60 A .780 [19.81] 1.280 [32.51] 1.480 [37.59] 1.580 [40.13] 1.780 [45.21] 1.880 [47.75] 1.980 [50.29] 2.280 [57.91] 2.780 [70.61] 3.280 [83.31] B .700 [17.78] 1.200 [30.48] 1.400 [35.56] 1.500 [38.10] 1.700 [43.18] 1.800 [45.72] 1.900 [48.26] 2.200 [55.88] 2.700 [68.58] 3.200 [81.28] C .400 [10.16] .900 [22.86] 1.100 [27.94] 1.200 [30.48] 1.400 [35.56] 1.500 [38.10] 1.600 [40.64] 1.900 [48.26] 2.400 [60.96] 2.900 [73.66] Dimensions D 1.104 [28.04] 1.604 [40.74] 1.804 [45.82] 1.904 [48.36] 2.104 [53.44] 2.204 [55.98] 2.304 [58.52] 2.604 [66.14] 3.104 [78.84] 3.604 [91.54] Part Nos. E 1.304 [33.12] 1.804 [45.82] 2.004 [50.90] 2.104 [53.44] 2.304 [58.52] 2.404 [61.06] 2.504 [63.60] 2.804 [71.22] 3.304 [83.92] 3.804 [96.62] F .290 [7.37] .190 [4.83] .190 [4.83] .190 [4.83] .190 [4.83] .190 [4.83] .190 [4.83] .190 [4.83] .190 [4.83] .190 [4.83] G — .890 [22.61] 1.090 [27.69] 1.190 [30.23] 1.390 [35.31] 1.490 [37.85] 1.590 [40.39] 1.890 [48.01] 2.390 [60.71] 2.890 [73.41] H .800 [20.32] 1.300 [33.02] 1.500 [38.10] 1.600 [40.64] 1.800 [45.72] 1.900 [48.26] 2.000 [50.80] 2.300 [58.42] 2.800 [71.12] 3.300 [83.82] 87605-1 87605-6 87605-8 87605-9 1-87605-1 1-87605-2 1-87605-3 1-87605-6 2-87605-1 2-87605-6 Note: All part numbers are RoHS compliant. 131 Catalog 1307819 Revised 8-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 AMPMODU Interconnection System Standard Profile Headers—Shrouded Bulkhead Type; with .066/.150 [1.68/3.81] End Dimension, Double-Row, .100 x .100 [2.54 x 2.45] Centerline .025 [0.64] Square Straight Post (with Detent Windows and Mounting Ears) .200 Ref. [5.08] (Contact Area) E D .352 [8.94] Typ. .220 [5.59] .047 [1.19] Typ. C .080 [2.03] .400 [10.16] .100 [2.54] .280 [7.11] Material and Finish .090 [2.29] Typ. .062 R [1.57] Typ. .150 Typ. [3.81] B .040 Typ. [1.02] Housing — Black thermoplastic, 94V-0 rated Posts — Copper alloy, plated .000030 [0.00076] gold over .000050 [0.00127] nickel on entire post .880 [22.35] .330 [8.38] .090 [2.29] Typ. A .080 [2.03] Typ. .318 [8.08] G F .289 [7.34] Standard Profile Headers, Shrouded Related Product Data Mateable Connectors with .066 [1.68] End Dimension — AMPMODU Board Mount Receptacles — pages 176, 179, 180 AMPMODU Wire-Applied Receptacles — pages 216-219 AMPMODU MTE Receptacles — pages 228, 229, 234 AMPMODU MT Receptacles — pages 256, 257 5 .240 [6.10] Typ. L .062 R [1.57] Typ. .040 [1.02] Typ. .066 [1.68] Typ. .400 [10.16] .080 [2.03] C .047 [1.19] Typ. Barrier Insert — page 204 H J K Mateable Connectors with .150 [3.81] End Dimension — AMPMODU MTE Receptacles — pages 232, 233, 235 (used with coupling shroud on page 241) Accessories .062 [1.57] Thick Panel .352 [8.94] Typ. .220 [5.59] D E Technical Documents — page 276 See mating connector for applicable product and application specifications. ±.002 D[±0.05] .235±.002 [5.97±0.05] ±.002 M [±0.05] .440±.002 [11.18±0.05] .005 [0.13] R Max. (4 Corners) .130-.135 Dia. Typ. [3.30-3.43] Recommended Panel Cutout 132 Catalog 1307819 Revised 8-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 AMPMODU Interconnection System Standard Profile Headers—Shrouded Bulkhead Type; with .066/.150 [1.68/3.81] End Dimension, Double-Row, .100 x .100 [2.54 x 2.45] Centerline (Continued) Dimensions A .780 [19.81] 1.280 [32.51] 1.480 [37.59] 1.580 [40.13] 1.780 [45.21] 1.980 [50.29] 2.280 [57.91] 2.780 [70.61] 3.280 [83.31] No. of Pos. 10 20 24 26 30 34 40 50 60 G — .890 [22.61] 1.090 [27.69] 1.190 [30.23] 1.390 [35.31] 1.590 [40.39] 1.890 [48.01] 2.390 [60.71] 2.890 [73.41] B .700 [17.78] 1.200 [30.48] 1.400 [35.56] 1.500 [38.10] 1.700 [43.18] 1.900 [48.26] 2.200 [55.88] 2.700 [68.58] 3.200 [81.38] C .400 [10.16] .900 [22.86] 1.100 [27.94] 1.200 [30.48] 1.400 [35.56] 1.600 [40.64] 1.900 [48.26] 2.400 [60.96] 2.900 [73.66] H .206 [5.23] .106 [2.69] .106 [2.69] .106 [2.69] .106 [2.69] .106 [2.69] .106 [2.69] .106 [2.69] .106 [2.69] J — .806 [20.47] 1.006 [25.55] 1.106 [28.09] 1.306 [33.17] 1.506 [38.25] 1.806 [45.87] 2.306 [58.57] 2.806 [71.27] D 1.104 [28.04] 1.604 [40.74] 1.804 [45.82] 1.904 [48.36] 2.104 [53.44] 2.304 [58.52] 2.604 [66.14] 3.304 [83.92] 3.604 [91.54] E 1.304 [33.12] 1.804 [45.82] 2.004 [50.90] 2.104 [53.44] 2.304 [58.52] 2.504 [63.60] 2.804 [71.22] 3.304 [83.92] 3.804 [96.62] F .290 [7.37] .190 [4.83] .190 [4.83] .190 [4.83] .190 [4.83] .190 [4.83] .190 [4.83] .190 [4.83] .190 [4.83] Dimensions K .612 [15.54] 1.112 [28.24] 1.312 [33.32] 1.412 [35.86] 1.612 [40.94] 1.812 [46.02] 2.112 [53.64] 2.612 [66.34] 3.112 [79.04] L .532 [13.51] 1.032 [26.21] 1.232 [31.29] 1.332 [33.83] 1.532 [38.91] 1.732 [43.99] 2.032 [51.61] 2.532 [64.31] 3.032 [77.01] M .632 [16.05] 1.132 [28.75] 1.332 [33.83] 1.432 [36.37] 1.632 [41.45] 1.832 [46.53] 2.132 [54.15] 2.632 [66.85] 3.132 [79.55] Part Nos. 87496-2 87496-7 87496-9 1-87496-0 1-87496-2 1-87496-4 1-87496-7 87496-1 2-87496-6 Part Nos. 87496-2 87496-7 87496-9 1-87496-0 1-87496-2 1-87496-4 1-87496-7 87496-1 2-87496-6 Standard Profile Headers, Shrouded No. of Pos. 10 20 24 26 30 34 40 50 60 5 Note: All part numbers are RoHS compliant. 133 Catalog 1307819 Revised 8-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 AMPMODU Interconnection System AMP-LATCH Low Profile Headers––Shrouded Low Profile Headers, Shrouded Product Facts ■ Available in selected positions 10 thru 60 ■ Flame retardant, thermoplastic housings, 94V-0 rated ■ Vertical and right-angle versions available in double row configurations ■ Available in .025 [0.64] square drawn wire posts ■ Wash out clearance for flux removal ■ Mates with AMP-LATCH Ribbon Cable Connectors ■ Available with and without eject latches ■ Available with and without kinked soldertails for PCB retention ■ Recognized under the Component Program of Underwriters Laboratories Inc. File No. E28476 R ■ Certified by Canadian Standards Association, File No. LR 7189 5 Performance Characteristics R Electrical Insulation Resistance — 5,000 megohms minimum initial Dielectric Withstanding Voltage — 1,000 V rms at sea level Environmental Operating Temperature — -65°C to +105°C Current — 1 ampere maximum per contact 134 Catalog 1307819 Revised 8-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 AMPMODU Interconnection System AMP-LATCH Low Profile Headers—Shrouded, with .150 [3.81] End Dimension, Double-Row, .100 x .100 [2.54 x 2.54] Centerline .025 [0.64] Square Straight Post A .045 (2 Plc.) [1.14] B .075±.002 (2 Plc.) [1.91±0.05] .165 [4.19] .360 [9.14] Material and Finish .015 .010 0.38 0.25 .025±.001 [0.64±0.03] Typ. .100 [2.54] [ ] .200 (Contact [5.08] Area) .040 .035 1.02 0.89 [ ] .385 [9.78] .020 .015 0.51 0.38 .120±.015 [3.05±0.38] .240 [6.10] [ ] .100 [2.54] .185 [4.70] Typ. .185±.010 [4.70±0.25] Related Product Data Electrical Characteristics — page 134 Mateable Connectors — AMPMODU Wire-Applied Receptacles — page 220 AMPMODU Board Mount Receptacles — pages 179, 180 Short Point Wire-Applied Connectors — page 224 5 .100±.003* Typ. [2.54±0.08] .100±.003* [2.54±0.08] .040±.003 [1.02±0.08] Dia. Typ. Recommended PC Board Hole Layout For Manual Insertion *±.003 [±0.08] tolerances not to accumulate within one connector pattern. No. of Pos. 10 14 16 20 24 26 34 40 50 60 Dimensions A .800 [20.32] 1.000 [25.40] 1.100 [27.94] 1.300 [33.02] 1.400 [35.56] 1.600 [40.64] 2.000 [50.80] 2.300 [58.42] 2.800 [71.12] 3.300 [83.82] B .400 [10.16] .600 [15.24] .700 [17.78] .900 [22.86] 1.100 [27.94] 1.200 [30.48] 1.600 [40.64] 1.900 [48.26] 2.400 [60.96] 2.900 [73.66] Post Plating/Part Nos. Plating A Plating B 5103309-1 5103308-1 5103309-2 5103308-2 5103309-3 5103308-3 5103309-5 5103308-5 — 1-5103308-3 5103309-6 5103308-6 5103309-7 5103308-7 5103309-8 5103308-8 1-5103309-0 1-5103308-0 — 1-5103308-2 Note: All part numbers are RoHS compliant. 135 Catalog 1307819 Revised 8-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. Low Profile Headers, Shrouded Housing — Glass-filled nylon, black, 94V-0 rated Posts — Copper alloy, plated as follows: Plating A — Gold flash over .000030 [0.00076] min. palladium-nickel plate on the mating surfaces, .000100 [0.00254] min. tin plate on soldertails, with entire post underplated .000050 [0.00127] min. nickel Plating B — Gold flash over .000015 [0.00038] min. palladium-nickel plate on the mating surfaces, .000100 [0.00254] min. tin plate on soldertails, with entire post underplated .000050 [0.00127] min. nickel .130 [3.30] USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 AMPMODU Interconnection System AMP-LATCH Low Profile Headers—Shrouded, with .150 [3.81] End Dimension, Double-Row, .100 x .100 [2.54 x 2.54] Centerline (Continued) .025 [0.64] Square Right-Angle Post Position No.1 Indicator • .385 [9.77] .165 [4.19] .025±.001 Typ. [0.64±0.03] Material and Finish Low Profile Headers, Shrouded .1975 Housing — Glass-filled nylon, black, [5.016] 94V-0 rated Posts — Copper alloy, plated as follows: +.008 Plating A — Gold flash over .000030 .153 -.005 [0.00076] min. palladium-nickel plate [3.88 +.203 ] -.127 on the mating surfaces, .000100 2 Plc. [0.00254] min. tin plate on soldertails, with entire post underplated .000050 [0.00127] min. nickel Plating B — Gold flash over .000015 [0.00038] min. palladium-nickel plate .130 [3.30] on the mating surfaces, .000100 [0.00254] min. tin plate on soldertails, .185±.010 with entire post underplated .000050 [4.69±0.25] [0.00127] min. nickel Typ. A B .240 [6.09] .200 (contact area) [5.08] .045 (2 Plc.) [1.14] .130 Typ. [3.30] .100 [2.54] .025±.001 .360 [.635±0.03] [9.14] Typ. .135+.020 -.010 3.42+0.51 -0.25 [ .075±.002 [1.90±0.05] .185 Typ. [4.69] .010 [0.25] .100 [2.54] .123 [3.12] Related Product Data Electrical Characteristics — page 134 Mateable Connectors — AMPMODU Wire-Applied Receptacles — page 220 Short Point Wire-Applied Connectors — page 224 5 .100±.003* [2.54±0.08] Typ. .100±.003* [2.54±0.08] .035±.003 [0.89±0.08] Dia. Typ. Recommended PC Board Hole Layout For Manual Insertion *±.003 [±0.08] tolerances not to accumulate within one connector pattern. No. of Pos. 10 14 16 20 26 34 40 50 60 Dimensions A .800 [20.32] 1.000 [25.40] 1.100 [27.94] 1.300 [33.02] 1.600 [40.64] 2.000 [50.80] 2.300 [58.42] 2.800 [71.12] 3.300 [83.82] B .400 [10.16] .600 [15.24] .700 [17.78] .900 [22.86] 1.200 [30.48] 1.600 [40.64] 1.900 [48.26] 2.400 [60.96] 2.900 [73.66] Post Plating/Part Nos. Plating A Plating B 5103311-1 5103310-1 5103311-2 5103310-2 5103311-3 5103310-3 5103311-5 5103310-5 5103311-6 5103310-6 5103311-7 5103310-7 5103311-8 5103310-8 1-5103311-0 1-5103310-0 1-5103311-2 — Note: All part numbers are RoHS compliant. 136 Catalog 1307819 Revised 8-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 ] AMPMODU Interconnection System AMP-LATCH Low Profile Headers—Shrouded, with .150 [3.81] End Dimension, Double-Row, .100 x .100 [2.54 x 2.54] Centerline & “Kinked” Soldertails for PCB Retention .025 [0.64] Square Straight Post (with Board Retention Feature) A .153+.008 .153 -.005 3.88+0.20 .15 - 0.13 (2 Plc.) [ .045 [1.14] B ] .075±.002 [1.91±0.05] (2 Plc.) .165 [4.19] .365 [9.27] Material and Finish Housing — Glass-filled PPA, black, 94V-0 rated Posts — Copper alloy, plated with gold flash over .000015 [0.00038] min. palladium-nickel plate on the mating surfaces, .000100 [0.00254] min. tin plate on soldertails, with entire post underplated .000050 [0.00127] min. nickel .025 .020 0.64 0.51 .025±.001 [0.64±0.03] Typ. .140 [3.56] [ ] .100 [2.54] .200 (Contact Area) [5.08] .040 .035 1.02 0.89 [ ] .020 .015 0.51 0.38 [ ] .185±.010 [4.69±0.25] Low Profile Headers, Shrouded Related Product Data Electrical Characteristics — page 134 Mateable Connectors — AMPMODU Wire-Applied Receptacles — page 220 AMPMODU Board Mount Receptacles — pages 179, 180 Short Point Wire-Applied Connectors — page 224 .120±.015 [3.05±0.38] .385 [9.78] .240 [6.10] .100 [2.54] .185 [4.69] .100±.003* Typ. [2.54±0.08] 5 *Reflow solder process compatible .100±.003* [2.54±0.08] .040±.003 [1.02±0.08] Dia. Typ. Recommended PC Board Hole Layout For Manual Insertion *±.003 [±0.08] tolerances not to accumulate within one connector pattern. No. of Pos. 10 14 16 20 24 34 40 50 60 Dimensions A .800 [20.32] 1.000 [25.40] 1.100 [27.94] 1.300 [33.02] 1.400 [35.56] 2.000 [50.80] 2.300 [58.42] 2.800 [71.12] 3.300 [83.82] B .400 [10.16] .600 [15.24] .700 [17.78] .900 [22.86] 1.100 [27.94] 1.600 [40.64] 1.900 [48.26] 2.400 [60.96] 2.900 [73.66] Post Plating Part Nos. 5104338-1 5104338-2 5104338-3 5104338-4 5104338-5 5104338-7 5104338-8 5104338-9 1-5104338-0 Note: All part numbers are RoHS compliant. 137 Catalog 1307819 Revised 8-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 AMPMODU Interconnection System AMP-LATCH Low Profile Headers—Shrouded, with .150 [3.81] End Dimension, Double-Row, .100 x .100 [2.54 x 2.54] Centerline & “Kinked” Soldertails for PCB Retention (Continued) .025 [0.64] Square Right-Angle Post (with Board Retention Feature) Position No.1 Indicator • .385 [9.77] .165 [4.19] .025±.001 [0.64±0.03] Typ. A B Material and Finish [ Housing — Glass-filled PPA, black, 94V-0 rated Posts — Copper alloy, plated with gold flash over .000015 [0.00038] min. palladium-nickel plate on the mating surfaces, .000100 [0.00254] min. tin plate on soldertails, with entire post underplated .000050 [0.00127] min. nickel Low Profile Headers, Shrouded +.008 .153 -.005 +0.20 3.88 -0.13 2 Plc. .200 [5.08] .045 (2 Plc.) [1.14] .130 Typ. [3.30] .100 [2.54] ] .370 [9.40] (contact area) .025 .020 0.64 0.50 [ ] .140 [3.56] .185±.010 [4.69±0.25] Typ. .240 [6.09] .200 [5.08] .025±.001 [.635±0.03] Typ. +.020 .125 -.010 +0.51 3.18 -0.25 [ .075±.002 [1.90±0.05] 2 Plc. .185 Typ. [4.69] .123 [3.12] .100 [2.54] Related Product Data .100±.003* [2.54±0.08] Typ. Electrical Characteristics — page 134 Mateable Connectors — AMPMODU Wire-Applied Receptacles — page 220 Short Point Wire-Applied Connectors — page 224 5 .100±.003* [2.54±0.08] .040±.003 [1.02±0.08] Dia. Typ. Recommended PC Board Hole Layout For Manual Insertion *±.003 [±0.08] tolerances not to accumulate within one connector pattern. No. of Pos. 10 14 16 20 40 50 Dimensions A .800 [20.32] 1.000 [25.40] 1.100 [27.94] 1.300 [33.02] 2.300 [58.42] 2.800 [71.12] B .400 [10.16] .600 [15.24] .700 [17.78] .900 [22.86] 1.900 [48.26] 2.400 [60.96] Post Plating Part Nos. 5104340-1 5104340-2 5104340-3 5104340-4 5104340-8 5104340-9 Note: All part numbers are RoHS compliant. 138 Catalog 1307819 Revised 8-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 ] AMPMODU Interconnection System Universal Ejection Style Pin Headers, Military, Center and Dual Polarized, .100 x .100 [2.54 x 2.54] Centers .100 [2.54] Straight-Thru, 4-Sided .025 [0.64] Sq. Posts .150 [3.81] .165 [4.19] .253 [6.43] .190 [4.83] .240 [6.10] .025 [0.64] .100 [2.54] .336 .315 [8.53] [8.00] .150 [3.81] A .050 [1.27] .025 [0.64] .107 [2.72] .289 [7.34] E Solder Tail Typ. B C Pin Header with Latches Position No.1 Indicator .096 Dia. [2.44] 2 Plc. .025 [0.64] • .106 [2.74] .549 [13.94] D Housing & Latches — Black thermoplastic, 94V-0 rated Contacts — Brass or phosphor bronze (at Tyco Electronics’ option); Duplex .000030 [0.00076] gold on mating end, .000100 [0.00254] min. tin on termination end, with entire contact underplated .000050 [0.00127] nickel A B 10 .700 17.78 1.100 27.94 1.260 32.00 .860 21.84 14 .900 22.86 1.300 33.02 1.460 37.08 1.060 26.92 16 1.000 25.40 1.400 35.56 1.560 39.62 1.180 29.46 20 1.200 30.48 1.600 40.64 1.760 44.70 1.360 34.54 24 1.400 35.56 1.800 45.72 1.960 49.78 1.560 39.62 26 1.500 38.10 1.900 48.26 2.060 52.32 1.660 42.16 34 1.900 48.26 2.300 58.42 2.460 62.48 2.060 52.32 40 2.200 55.88 2.600 66.04 2.760 70.10 2.360 59.94 50 2.700 68.58 3.100 78.74 3.260 82.80 2.860 72.64 Related Product Data Electrical Characteristics — page 134 Mateable Connectors — AMPMODU Wire-Applied Receptacles — page 220 Mounting Information 4-24 self-tapping screws and 2-56 bolts and nuts are available for mounting straight-thru pin headers of pc boards. Typical applications and part nos. for ordering this hardware are presented below. D E .110 [2.79] .155 [3.94] .110 [2.79] .155 [3.94] .110 [2.79] .155 [3.94] .110 [2.79] .155 [3.94] .110 [2.79] .155 [3.94] .110 [2.79] .155 [3.94] .110 [2.79] .155 [3.94] .110 [2.79] .155 [3.94] .110 [2.79] .155 [3.94] Part Number (Without Latches) 5102154-1 5102156-1 5102154-2 5102156-2 5102154-3 5102156-3 5102154-4 5102156-4 5102154-5 5102156-5 5102154-6 5102156-6 5102154-8 5102156-8 5102154-9 5102156-9 1-5102154-0 1-5102156-0 5 Notes: 1. Pin headers in 10- and 14-position sizes have only one slot for snap-in polarizer (military polarization), located as shown. Notes: 2. Pin headers in 10-position size have only slot for dual polarization, located as shown. Latch (See Note at left.) 2-56 Bolt & Nut (2 Each Req‘d.) .256 [6.50] 4-24 Self-Tapping Screw (2 Req‘d.) Note: 2-56 bolts and nuts may be used to mount pin headers with and without latches. If latches are to be used, the bolts must be positioned in the pin header before the latches are installed. Note: All part numbers are RoHS compliant. Dimensions C No. of Positions Universal Ejection Style Pin Headers Pin Header without Latches Material and Finish Note: Used with Header (optional) Latch (sold separately) Part Number 1825851-1 .195 [4.95] Pin Header Mounting using 4-24 Self-Tapping Screws: Part No. 19156-1 (for .062 [1.57] Thick PC Board) Part No. 19156-2 (for .093 [2.36] Thick PC Board) Part No. 19156-3 (for .125 [3.18] Thick PC Board) Pin Header Mounting with 2-56 Bolts and Nuts: Part No. 746383-1 (Bolt Only) Kit No. 102198-1 (Bolt and Nut, 2 Each per Kit) 139 Catalog 1307819 Revised 8-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 AMPMODU Interconnection System Universal Ejection Style Pin Headers, Military, Center and Dual Polarized, .100 x .100 [2.54 x 2.54] Centers (Continued) Right-Angle, 4-Sided .025 [0.64] Sq. Posts .253 [6.43] .100 [2.54] .165 [4.19] .150 [3.81] .025 [0.64] Dia. .100 [2.54] .190 [4.83] .038 [0.97] E Typ. .240 [6.10] .100 [2.54] Solder Tail .336 .315 [8.53] [8.00] .150 [3.81] Pos. No. 1 Indicator A B C .025 .107 [0.64] [2.72] .050 [1.27] .025 [0.64] Pin Header with Latches .096 [2.44] .549 [13.94] .108 [2.74] Note: Used with Header (optional) Latch (sold separately) Part Number 1825851-1 Universal Ejection Style Pin Headers .195 [4.95] D Pin Header without Latches Material and Finish Housing & Latches — Black thermoplastic, 94V-0 rated Contacts — Brass or phosphor bronze (at Tyco Electronics’ option); Duplex .000030 [0.00076] gold on mating end, .000100 [0.00254] min. tin on termination end, with entire contact underplated .000050 [0.00127] nickel 5 .289 [7.34] Related Product Data Electrical Characteristics — page 134 Mateable Connectors — AMPMODU Wire-Applied Receptacles — page 220 Mounting Information 4-24 self-tapping screws and 2-56 bolts and nuts are available for mounting straight-thru pin headers of pc boards. Typical applications and part nos. for ordering this hardware are presented below. Note: 2-56 bolts and nuts may be used to mount pin headers with and without latches. If latches are to be used, the bolts must be positioned in the pin header before the latches are installed. Note: All part numbers are RoHS compliant. Dimensions C No. of Positions A B 10 .700 17.78 1.100 27.94 1.260 32.00 .860 21.84 14 .900 22.86 1.300 33.02 1.460 37.08 1.060 26.92 16 1.000 25.40 1.400 35.56 1.560 39.62 1.180 29.46 20 1.200 30.48 1.600 40.64 1.760 44.70 1.360 34.54 24 1.400 35.56 1.800 45.72 1.960 49.78 1.560 39.62 26 1.500 38.10 1.900 48.26 2.060 52.32 1.660 42.16 34 1.900 48.26 2.300 58.42 2.460 62.48 2.060 52.32 40 2.200 55.88 2.600 66.04 2.760 70.10 2.360 59.94 50 2.700 68.58 3.100 78.74 3.260 82.80 2.860 72.64 D E .110 [2.79] .155 [3.94] .110 [2.79] .155 [3.94] .110 [2.79] .155 [3.94] .110 [2.79] .155 [3.94] .110 [2.79] .155 [3.94] .110 [2.79] .155 [3.94] .110 [2.79] .155 [3.94] .110 [2.79] .155 [3.94] .110 [2.79] .155 [3.94] Part Number (Without Latches) 5102160-1 5102162-1 2-5102160-2* 2-5102162-2* 5102160-3 — 5102160-4 — 5102160-5 — 5102160-6 2-5102162-6* 5102160-8 5102162-8 5102160-9 — 1-5102160-0 1- 5102162-0 Notes: 1. Pin headers in 10- and 14-position sizes have only one slot for snap-in polarizer (military polarization), located as shown. Notes: 2. Pin headers in 10-position size have only slot for dual polarization, located as shown. *Blue housing. Latch (See Note at left.) 2-56 Bolt & Nut (2 Each Req‘d.) .256 [6.50] 4-24 Self-Tapping Screw (2 Req‘d.) Pin Header Mounting using 4-24 Self-Tapping Screws: Part No. 19156-1 (for .062 [1.57] Thick PC Board) Part No. 19156-2 (for .093 [2.36] Thick PC Board) Part No. 19156-3 (for .125 [3.18] Thick PC Board) Pin Header Mounting with 2-56 Bolts and Nuts: Part No. 746383-1 (Bolt Only) Kit No. 102198-1 (Bolt and Nut, 2 Each per Kit) 140 Catalog 1307819 Revised 8-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 AMPMODU Interconnection System AMPMODU Stacking Connectors—Shrouded, .025 x .025 [0.64 x 0.64] Posts Product Facts Parallel PC board stacking without use of mother boards ■ Provides space between boards for interference-free routing of wire-to-board connections ■ Two header heights available: .785 [19.94] and 1.200 [30.48] ■ Vertical mount headers are fully shrouded ■ Receptacle contacts have dual cantilever beams with built-in overstress protection ■ .025 [0.64] sq. posts and receptacle contacts on double-row, .100 x .100 [2.54 x 2.54] centers ■ Header posts and receptacle contacts are phosphor bronze, duplex plated ■ Housings are made of flame retardant, glass-filled thermoplastic AMPMODU stacking connectors are a two-piece interconnection system designed for parallel stacking printed circuit boards, without the use of mother boards. Vertical mount headers and receptacle assemblies feature duplex plated posts and receptacle contacts on a double-row, .100 x .100 [2.54 x 2.54] grid. The .025 [ 0.64] sq. header posts are more protected, and the top-entry receptacle contacts utilize the proven Shrouded Stacking Headers ■ AMPMODU receptacle contact design; dual cantilever beams with builtin overstress protection. Headers are available in two heights: .785 [19.94] and 1.200 [30.48]. This allows the customer to use the height of the header to keep wire-to-board connections up and away from other board components, particularly if the components are densely packaged around the header. 5 141 Catalog 1307819 Revised 8-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 AMPMODU Interconnection System Receptacle Assemblies, Double-Row Board Mounted Vertical Mount, Top Entry, High Profile, Selectively Loaded (with Standoffs) A .050 [1.27] B .100 [2.54] .100 [2.54] .238 [6.05] Material and Finish Housing — Glass-filled thermoplastic, black, 94V-0 rated Contacts — Phosphor bronze, plated .000010 [0.000254] min. gold on mating area, .000150-.000300 [0.003810.00762] matte tin on solder area, with entire contact underplated .000050.000100 [0.00127-0.00254] nickel Post Entry .025 [0.64] .320 [8.13] Shrouded Stacking Headers .020 [0.51] (Standoffs) .100 [2.54] .175 [4.45] .115 [2.92] B .100* Typ. [2.54] .035±.003 Dia. [0.89±0.08] .100* [2.54] 5 Recommended PC Board Hole Layout *±.003 [±0.08] tolerances not to accumulate within one connector pattern. B Receptacle Assembly Part No. 2.400 [60.96] 2.300 [58.42] 5-102766-1 3.000 [76.2] 2.900 [73.66] 5-102766-4 Dimensions No. of Pos. 48* (40 Active) 60* (52 Active) A *In addition to the active positions, each receptacle has four cavities on each end that are not loaded with contacts. These empty cavities aid in aligning the receptacle with header posts during mating. Notes: 1. Part no. and date code stamped on housing where size permits. Notes: 2. These receptacle assemblies mate with headers of the same size as the active positions listed above. Refer to pages 143 and 144. Note: All part numbers are RoHS compliant. 142 Catalog 1307819 Revised 8-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 AMPMODU Interconnection System Headers, Double-Row, .785 [19.94] Height .025 x .025 [0.64 x 0.64] Straight Post (with Pin Protection) .090 [2.29] .100 Typ. [2.54] .320 [8.13] .124 [3.15] .348 [8.84] .100 [2.54] Material and Finish Housing — Glass-filled thermoplastic, black, 94V-0 rated Contacts — Phosphor bronze, plated .000015 [0.000381] min. gold on mating area, .000100-.000200 [0.002540.00508] matte tin on solder area, with entire post underplated .000050 [0.00127] nickel A B .250 [3.81] .103 Dia. [2.62] (at Surface) C .070 [1.78] .103 [2.62] .380 [9.65] Min. .340 [8.64] .025 [0.64] Sq. Posts .450 [11.43] .785 [19.94] Shrouded Stacking Headers .099 Dia. [2.51] (at .340 [8.64] Depth) .275 [6.99] .265 [6.73] .084 [2.13] .268 [6.81] D .025 [0.64] Sq. Posts 5 B .250±.003 [3.81±0.08] .050±.003 [1.27±0.08] .100* [2.54] Typ. .100* [2.54] .043±.005 Dia. [1.09±0.13] .125 [3.18] Dia. C Recommended PC Board Hole Layout *±.003 [±0.08] tolerances not to accumulate within one connector pattern. No. of Pos. 40 52 A 2.720 [69.09] 3.320 [84.33] Dimensions B C 2.400 [60.96] 1.900 [48.26] 3.000 [76.2] 2.500 [63.5] D 2.430 [61.27] 3.030 [76.96] Header Part No. 5-102871-2 5-102871-1 Note: These headers mate with receptacle assemblies having the same number of active positions. See page 142. Note: All part numbers are RoHS compliant. 143 Catalog 1307819 Revised 8-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 AMPMODU Interconnection System Headers, Double-Row, 1.200 [30.48] Height .025 x .025 [0.64 x 0.64] Straight Post (with Pin Protection) .320 [8.13] .090 [2.29] .124 [3.15] .100 Typ. [2.54] .348 [8.84] .100 [2.54] Material and Finish Housing — Glass-filled thermoplastic, black, 94V-0 rated Contacts — Phosphor bronze, plated .000015 [0.000381] min. gold on mating area, .000100-.000200 [0.002540.00508] matte tin on solder area, with entire post underplated .000050 [0.00127] nickel A .250 [6.35] B .025 [0.64] Sq. Posts .098 [2.49] C .077 Dia. [1.96] (at Surface) .250 [6.35] .040 [1.02] .340 [8.64] .350 [8.89] Min. Shrouded Stacking Headers .865 [21.97] 1.200 [30.48] .073 Dia. [1.85] (at .340 [8.64] Depth) .060 [1.52] .084 [2.13] .265 [6.73] 5 .268 [6.81] D .275 [6.99] .025 [0.64] Sq. Posts B .250±.003 [3.81±0.08] .050±.003 [1.27±0.08] .100* [2.54] Typ. .100* [2.54] .043±.005 [1.09±0.13] .125 [3.18] Dia. C Recommended PC Board Hole Layout *±.003 [±0.08] tolerances not to accumulate within one connector pattern. No. of Pos. 52 A 3.320 [84.33] Dimensions B C 3.000 [76.2] 2.500 [63.5] D 3.030 [76.96] Header Part No. 5-102826-1 Note: This header mates with receptacle assembly having the same number of active positions. See page 142. Note: All part numbers are RoHS compliant. 144 Catalog 1307819 Revised 8-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 AMPMODU Interconnection System ACTION PIN Headers—Shrouded and Unshrouded Product Facts Straight posted unshrouded and shrouded versions ■ .025 [0.64] square ACTION PIN posts ■ ACTION PIN posts make a gas-tight, press-fit connection in plated-through holes ■ Designed not to damage plated-through holes ■ Unshrouded headers available in selected sizes 1 through 40 positions (single-row) and 4 through 80 positions (double-row) ■ Shrouded headers (doublerow) available in selected sizes of 6 through 60 positions ■ Flame retardant, black thermoplastic housings, 94V-0 rated ■ .100 [2.54] Centerline spacing ■ Recognized under the Component Program of Underwriters Laboratories Inc., File No. E28476 ACTION PIN Headers ■ R ■ Certified by Canadian Standards Association, File No. LR 16455 5 R 145 Catalog 1307819 Revised 8-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 AMPMODU Interconnection System ACTION PIN Headers—Unshrouded, Single-Row, .100 [2.54] Centerline .025 [0.64] Square Straight Post .050 [1.27] Max. A B .092 [2.34] .100 Typ. [2.54] .200 Ref. [5.08] (Contact Area) .320 [8.13] .090 [2.29] .250 [6.35] .042 [1.07] Typ. Material and Finish Housing — Black thermoplastic, 94V-0 rated Posts — Copper alloy, duplex plated .000030 [0.00076] gold on contact area, .000100-.000200 [0.00254-0.00508] matte tin on termination end, with entire post underplated .000050 [0.00127] nickel B See page 168 for hole dimensions .100* [2.54] Recommended PC Board Hole Layout *±.003 [±0.08] tolerances not to accumulate within one connector pattern. Part Nos. ACTION PIN Headers, Unshrouded Related Product Data Mateable Connectors — Refer to the Mating Post Selection Guide — page 90 ACTION PIN Posts — pages 150, 151 Application Tooling — page 152 Technical Documents — page 276 See mating connector for applicable product and application specifications 5 Dimensions No. of Pos. A B 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 32 36 40 .084 [2.13] .184 [4.67] .284 [7.21] .384 [9.75] .484 [12.29] .584 [14.83] .684 [17.37] .784 [19.91] .884 [22.45] .984 [24.99] 1.084 [27.53] 1.184 [30.07] 1.284 [32.61] 1.384 [35.15] 1.484 [37.69] 1.584 [40.23] 1.684 [42.77] 1.784 [45.31] 1.884 [47.85] 1.984 [50.39] 2.084 [52.93] 2.184 [55.47] 2.284 [58.01] 2.384 [60.55] 2.484 [63.09] 2.584 [65.63] 2.684 [68.17] 2.784 [70.71] 2.884 [73.25] 2.984 [75.79] 3.184 [80.87] 3.584 [91.03] 3.984 [101.19] — .100 [2.54] .200 [5.08] .300 [7.62] .400 [10.16] .500 [12.70] .600 [15.24] .700 [17.78] .800 [20.32] .900 [22.86] 1.000 [25.40] 1.100 [27.94] 1.200 [30.48] 1.300 [33.02] 1.400 [35.56] 1.500 [38.10] 1.600 [40.64] 1.700 [43.18] 1.800 [45.72] 1.900 [48.26] 2.000 [50.80] 2.100 [53.34] 2.200 [55.88] 2.300 [58.42] 2.400 [60.96] 2.500 [63.50] 2.600 [66.04] 2.700 [68.58] 2.800 [71.12] 2.900 [73.66] 3.100 [78.74] 3.500 [88.90] 3.900 [99.06] For .062 [1.57] Thick PC Boards 8-103336-5 8-103336-4 9-103336-0 8-103336-6 8-103336-8 8-103336-7 8-103336-9 5-103336-1 5-103336-2 5-103336-3 5-103336-4 5-103336-5 5-103336-6 5-103336-7 5-103336-8 5-103336-9 6-103336-0 6-103336-1 6-103336-2 6-103336-3 — — — — 6-103336-8 — — — — 7-103336-3 7-103336-5 7-103336-9 8-103336-3 For .093-.125 [.236-3.18] Thick PC Boards 8-102898-5 8-102898-4 9-102898-0 8-102898-6 8-102898-8 8-102898-7 8-102898-9 5-102898-1 5-102898-2 5-102898-3 5-102898-4 5-102898-5 5-102898-6 5-102898-7 5-102898-8 5-102898-9 6-102898-0 6-102898-1 6-102898-2 6-102898-3 6-102898-4 6-102898-5 6-102898-6 6-102898-7 6-102898-8 6-102898-9 7-102898-0 7-102898-1 7-102898-2 7-102898-3 7-102898-5 7-102898-9 8-102898-3 Note: To insert header into PC board, use seating tool with arbor tool or air powered machine—page 152. Note: All part numbers are RoHS compliant. 146 Catalog 1307819 Revised 8-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 AMPMODU Interconnection System ACTION PIN Headers—Unshrouded, Double-Row, .100 x .100 [2.54 x 2.54] Centerline .025 [0.64] Square Straight Post .050 [1.27] Max. A .100 [2.54] B .100 Typ. [2.54] .200 Ref. [5.08] (Contact Area) .320 [8.13] .090 [2.29] .250 [6.35] .042 [1.07] (2 Plc.) Material and Finish Housing — Black thermoplastic, 94V-0 rated Posts — Copper alloy, duplex plated .000030 [0.00076] gold on contact area, .000100-.000200 [0.00254-0.00508] matte tin on termination end, with entire post underplated .000050 [0.00127] nickel .192 [4.88] B .100* [2.54] .100* [2.54] See page 151 for hole dimensions ACTION PIN Headers, Unshrouded Recommended PC Board Hole Layout Related Product Data *±.003 [±0.08] tolerances not to accumulate within one connector pattern. Mateable Connectors — Refer to the Mating Post Selection Guide — page 90 ACTION PIN Posts — pages 150, 151 Application Tooling — page 152 Part Nos. Dimensions No. of Pos. Accessories Barrier Insert — page 204 Technical Documents — page 276 See mating connector for applicable product and application specifications 4 6 8 10 12 14 16 18 20 22 24 26 28 30 32 34 36 38 40 42 46 50 60 66 80 A .184 [4.67] .284 [7.21] .384 [9.75] .484 [12.29] .584 [14.83] .684 [17.37] .784 [19.91] .884 [22.45] .984 [24.99] 1.084 [27.53] 1.184 [30.07] 1.284 [32.61] 1.384 [35.15] 1.484 [37.69] 1.584 [40.23] 1.684 [42.77] 1.784 [45.31] 1.884 [47.85] 1.984 [50.39] 2.084 [52.39] 2.284 [58.01] 2.484 [63.09] 2.984 [75.79] 3.284 [83.41] 3.984 [101.19] B .100 [2.54] .200 [5.08] .300 [7.62] .400 [10.16] .500 [12.70] .600 [15.24] .700 [17.78] .800 [20.32] .900 [22.86] 1.000 [25.40] 1.100 [27.94] 1.200 [30.48] 1.300 [33.02] 1.400 [35.56] 1.500 [38.10] 1.600 [40.64] 1.700 [43.18] 1.800 [45.72] 1.900 [48.26] 2.000 [50.80] 2.200 [55.88] 2.400 [60.96] 2.900 [73.66] 3.200 [81.28] 3.900 [99.06] For .062 [1.57] Thick PC Boards 5-103542-1 5-103542-2 5-103542-3 5-103542-4 5-103542-5 5-103542-6 5-103542-7 5-103542-8 5-103542-9 6-103542-0 6-103542-1 6-103542-2 6-103542-3 6-103542-4 6-103542-5 6-103542-6 6-103542-7 6-103542-8 6-103542-9 7-103542-0 7-103542-2 7-103542-4 7-103542-9 8-103542-2 8-103542-9 For .093-.125 [.236-3.18] Thick PC Boards 5-103233-1 5-103233-2 5-103233-3 5-103233-4 5-103233-5 5-103233-6 5-103233-7 5-103233-8 5-103233-9 6-103233-0 6-103233-1 6-103233-2 6-103233-3 6-103233-4 6-103233-5 6-103233-6 6-103233-7 6-103233-8 6-103233-9 7-103233-0 — 7-103233-4 7-103233-9 — 8-103233-9 5 Note: All part numbers are RoHS compliant. 147 Catalog 1307819 Revised 8-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 AMPMODU Interconnection System ACTION PIN Headers—Shrouded with .066 [1.68] End Dimension, Double-Row, .100 x .100 [2.54 x 2.54] Centerline .025 [0.64] Square Straight Post (with Detent Windows, for .093-.125 [.236-3.18] Thick PC Board) .066 [1.68] (2 Plc.) .040 [1.02] (3 Plc.) B C .100 Typ. [2.54] .100 [2.54] .200 Ref. [5.08] (Contact Area) .320 [8.13] .250 [6.35] .400 [10.16] E .240 [6.10] (2 Plc.) D Material and Finish ACTION PIN Headers, Shrouded Housing — Black thermoplastic, 94V-0 rated Posts — Copper alloy, duplex plated .000030 [0.00076] gold on contact area, .000100-.000200 [0.00254-0.00508] matte tin on termination end, with entire post underplated .000050 [0.00127] nickel .440 [11.18] .085 [2.16] B .100* [2.54] .100* [2.54] Related Product Data Mateable Connectors — AMPMODU Board Mount Receptacles — pages 176, 179, 180 AMPMODU Wire-Applied Receptacles — pages 217-219 AMPMODU MT Receptacles — pages 256, 257 ACTION PIN Posts — pages 150, 151 Application Tooling — page 152 5 Accessories Barrier Insert — page 204 Technical Documents — page 276 See mating connector for applicable product and application specifications .090 [2.29] .090 [2.29] (2 Plc.) A See page 151 for hole dimensions Recommended PC Board Hole Layout *±.003 [±0.08] tolerances not to accumulate within one connector pattern. No. of Pos. 6 8 10 12 14 16 18 20 26 30 34 40 50 60 A .412 [10.46] .512 [13.00] .612 [15.54] .712 [18.08] .812 [20.62] .912 [23.16] 1.012 [25.70] 1.112 [28.24] 1.412 [35.86] 1.612 [40.94] 1.812 [46.02] 2.112 [53.64] 2.612 [66.34] 3.112 [79.04] B .332 [8.43] .432 [10.97] .532 [13.51] .632 [16.05] .732 [18.59] .832 [21.13] .932 [23.67] 1.032 [26.21] 1.332 [33.83] 1.532 [38.91] 1.732 [43.99] 2.032 [51.61] 2.532 [64.31] 3.032 [77.01] Dimensions C .200 [5.08] .300 [7.62] .400 [10.16] .500 [12.70] .600 [15.24] .700 [17.78] .800 [20.32] .900 [22.86] 1.200 [30.48] 1.400 [35.56] 1.600 [40.64] 1.900 [48.26] 2.400 [60.96] 2.900 [73.66] D .106 [2.69] .106 [2.69] .206 [5.23] .206 [5.23] .306 [7.77] .306 [7.77] .406 [10.31] .106 [2.69] .106 [2.69] .106 [2.69] .106 [2.69] .106 [2.69] .106 [2.69] .106 [2.69] E — — — — — — — .806 [20.47] 1.106 [28.09] 1.306 [33.17] 1.506 [38.25] 1.806 [45.87] 2.306 [58.57] 2.806 [71.27] Header Part Nos. 5-102699-2 5-102699-3 5-102699-4 5-102699-5 5-102699-6 5-102699-7 5-102699-8 5-102699-9 6-102699-2 6-102699-4 6-102699-6 6-102699-9 7-102699-3 7-102699-8 Note: All part numbers are RoHS compliant. 148 Catalog 1307819 Revised 8-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 AMPMODU Interconnection System ACTION PIN Headers—Shrouded with .150 [3.81] End Dimension, Double-Row, .100 x .100 [2.54 x 2.54] Centerline .025 [0.64] Square Straight Post (with Detent Windows, for .093-.125 [.236-3.18] Thick PC Board) .150 [3.81] (2 Plc.) .040 [1.02] (3 Plc.) B C .100 Typ. [2.54] .100 [2.54] .200 Ref. [5.08] (Contact Area) .320 [8.13] .250 [6.35] .400 [10.16] .090 [2.29] (2 Plc.) A E .240 [6.10] (2 Plc.) D .440 [11.18] Material and Finish .085 [2.16] Related Product Data Mateable Connectors — AMPMODU MTE Receptacles — pages 232, 233 ACTION PIN Posts — pages 150, 151 Application Tooling — page 152 Accessories Barrier Insert — page 204 Technical Documents — page 276 See mating connector for applicable product and application specifications B .100* [2.54] ACTION PIN Headers, Shrouded Housing — Black thermoplastic, 94V-0 rated Posts — Copper alloy, duplex plated .000030 [0.00076] gold on contact area, .000100-.000200 [0.00254-0.00508] matte tin on termination end, with entire post underplated .000050 [0.00127] nickel .090 [2.29] .100* [2.54] See page 151 for hole dimensions Recommended PC Board Hole Layout *±.003 [±0.08] tolerances not to accumulate within one connector pattern. No. of Pos. 6 8 10 12 14 16 18 20 24 26 30 34 40 50 60 A .580 [14.73] .680 [17.27] .780 [19.81] .880 [22.35] .980 [24.89] 1.080 [27.43] 1.180 [29.97] 1.280 [32.51] 1.480 [37.59] 1.580 [40.13] 1.780 [45.21] 1.980 [50.29] 2.280 [57.91] 2.780 [70.61] 3.280 [83.31] B .500 [8.43] .600 [10.97] .700 [17.78] .800 [20.32] .900 [22.86] 1.000 [25.40] 1.100 [27.94] 1.200 [30.48] 1.400 [35.56] 1.500 [38.10] 1.700 [43.18] 1.900 [48.26] 2.200 [55.88] 2.700 [68.58] 3.200 [81.28] Dimensions C .200 [5.08] .300 [7.62] .400 [10.16] .500 [12.70] .600 [15.24] .700 [17.78] .800 [20.32] .900 [22.86] 1.100 [27.94] 1.200 [30.48] 1.400 [35.56] 1.600 [40.64] 1.900 [48.26] 2.400 [60.96] 2.900 [73.66] D .190 [4.83] .190 [4.83] .290 [7.37] .290 [7.37] .390 [9.91] .390 [9.91] .490 [10.31] .190 [4.83] .190 [4.83] .190 [4.83] .190 [4.83] .190 [4.83] .190 [4.83] .190 [4.83] .190 [4.83] E — — — — — — — .890 [22.61] 1.090 [27.69] 1.190 [30.23] 1.390 [35.31] 1.590 [40.39] 1.890 [48.01] 2.390 [60.71] 2.890 [73.41] 5 Header Part Nos. 6-102557-0 6-102557-1 5-102557-9 6-102557-2 6-102557-3 6-102557-4 6-102557-5 5-102557-2 6-102557-7 5-102557-3 5-102557-4 5-102557-5 5-102557-1 5-102557-6 5-102557-7 Note: All part numbers are RoHS compliant. 149 Catalog 1307819 Revised 8-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 AMPMODU Interconnection System ACTION PIN Press-Fit Posts The Reliable Plated-Through Hole Interconnect Solderless interconnections have been popular in electrical and electronic applications with world-wide success for decades. They provide reliable electrical and mechanical stability and offer applied-cost savings across the board. For PC board applications, compliant ACTION PIN posts provide these features: ■ Large gas-tight contact zone ■ High reliability due to stored energy ■ More resistant to damage to plated-through holes during installation ■ Especially suited for multilayer PC boards ■ Less costly board manufacturing due to larger hole tolerances compared to use of solid pins ■ Application can be made by end-user ■ Repairability—contact can be replaced in the same pin location (two repairs) ■ Installation with no heat cycling of board ■ Permits mass insertion by minimizing forces needed to insert pins as compared to solid pin press-fit application ■ Significant applied-cost savings in many applications ACTION PIN Press-Fit Posts Since compliant ACTION PIN posts do not have to be soldered, problems associated with solder are eliminated, such as: 5 ■ Faulty solder joints ■ Solder fumes; contaminants are deposited on the contacts ■ Solder spots; short circuits between printed circuits ■ Flux residuals ■ Thermal strain on printed circuit boards and components ■ Degassing of plated-through holes Principle of the Compliant ACTION PIN Post When a compliant ACTION PIN post is inserted into a plated-through hole, two spring members are compressed, exerting force against the hole for a gas-tight connection. The diameter of the hole is smaller than the diagonal size of the pin (see cross-section illustration below). The beam characteristics of the pin are designed so that a plastic, as well as an elastic, deformation takes place during insertion. The two spring members compress to different degrees to accommodate hole tolerances. The compliant pin also reduces strain on the board. With a rigid pin, the elastic strain energy is stored entirely in the board, leading to damage of the plated-through holes. With the compliant ACTION PIN post, the residual force of the elastic deformation maintains stored energy to produce a tight contact zone between the pin and the plated-through hole. This maintains long-term electrical and mechanical reliability of the interconnection. Solderless press-fit interconnections using compliant pins are primarily integrated in, but not limited to, backplanes. Solderless press-fit interconnections are used in racks, especially where connectors must be fixed on the solder side of the PC board and/or component side. In these applications, the holes for ACTION PIN post connectors are covered during the soldering process and press-fitting is performed after soldering. Other applications for ACTION PIN post interconnections include PC boards that incorporate components using surface mount technology (SMT). Here, too, press-fit interconnections can be applied after soldering, thus eliminating complications associated with connectors suitable for surface mounting. Minimum Hole Dia. .037 [0.94] Maximum Hole Dia. .043 [1.09] Cross-Section Area of ACTION PIN Press-Fit Post in Printed Circuit Board Holes 150 Catalog 1307819 Revised 8-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 AMPMODU Interconnection System ACTION PIN Press-Fit Posts (Continued) ACTION PIN posts provide a more reliable press-fit connection. Localized pressure in the interface area provides oxide break-through and prevents corrosion better in many of the harshest environments to help provide a reliable connection. Also, radial and axial distortion are controlled to meet today’s standards for multilayer board applications. ACTION PIN Press-Fit Posts ➀ PC Board Thickness ACTION PIN posts are designed for use in a variety of PC board thicknesses. However, certain ACTION PIN posts are to be used in specific ranges of board thicknesses. To promote optimum performance, the recommended board thicknesses provided with the connector being used must be followed. ➀ Annular Ring (See Note) ➁ Drilled Hole ➂ Copper Thickness ➃ Tin-lead Thickness ➄ Plated-Through Hole 5 ➂ ➃ ➄ ➁ ACTION PIN Post/PC Board Applications Plating Thicknesses ACTION PIN Contact Drilled Hole Material Thickness Diameter➁ Copper➂* Tin-lead➃ .025 [0.64] .0453±.001 [1.151±0.03] .001-.003 [0.03-0.08] .0003 [0.008]Min. *Maximum hardness of copper layer is 150 Knoop. **Radial hole distortion. Note: Recommended annular ring diameter is hole diameter plus .020 [0.51]. Plated-Through Hole Diameter➄ .037-.043 [0.94-1.09] Distortion Specification* Average Maximum .0015 [0.038] .002 [0.05] 151 Catalog 1307819 Revised 8-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 AMPMODU Interconnection System Application Tooling for AMPMODU Headers with ACTION PIN Posts ACTION PIN Post Replacement Tooling Single-Row Connector Seating Tools Tooling Assembly No. 91171-1 is used to install single-row AMPMODU headers with ACTION PIN posts into PC boards. Rear Insertion/Extraction Tool No. 265871-7 (Ref. 408-2636) Includes: Impact Tool No. 380392-8 Removal Tool No. 265964-1 Replacement Tip No. 308554-1 Pin headers with ACTION PIN posts allow high speed, solderless back-plane construction through press-fit application. Press fitting connectors to printed circuit boards requires special seating tools which transfer application force directly to the contacts. Application Tooling for ACTION PIN Posts Force applied to the tool to seat the connectors can be provided by the Tyco Electronics seating machines shown on this page. Double-Row Connector Seating Tools Header Size Tool (No. of Pos.) Assembly No. 4 91170-1 6 91170-1 8 91170-2 12 91170-5 14 91170-6 16 91170-7 20 91170-9 24 1-91170-1 30 1-91170-4 36 1-91170-7 40 1-91170-9 50 2-91170-4 60 2-91170-9 80 3-91170-2 96 100 120 140 200 Triple-Row Connector Seating Tools Header Size Tool (No. of Pos.) Assembly No. 96 91169-8 105 91169-6 120 91169-7 150 91169-3 195 91169-2 204 91169-1 210 91169-5 300 91169-9 3-91170-5 3-91170-6 3-91170-8 4-91170-0 4-91170-2 For tooling information, call the Tyco Electronics Automation Group 1-800-722-1111. ASG Servo Electric Presses 5 BMEP 5T Tyco Electronics offers a wide range of servo-electric presses for the application of press-fit connectors. Systems are available with varying force capacity, board size capacity and process capability. Each system features real-time force feedback and PC control to allow the highest level of control and traceability. Every connector pressed is Press Model BMEP 3T BMEP 5T MEP 6T AEP 6T MEP 12T AEP 12T AEP 6T monitored to confirm that maximum force is not exceeded and minimum force is met. Each system controls force, height and speed to allow termination of the pressing cycle by force or height parameters. Complete SPC data is available as each connector press cycle is monitored and stored. Description Semi-automatic, benchtop servo-electric press Semi-automatic, benchtop servo-electric press Semi-automatic, stand-alone servo-electric press Semi-automatic, stand-alone servo-electric press Automatic, inline servo-electric press Automatic, stand alone servo-electric press Please see the matrix below and contact Tyco Electronics Automation Group at 1-800-722-1111 for assistance in understanding which system will best meet your needs. Max Pressing Force tons [kN] Max Board Size (L x W) in [mm] 3 [26.7] 18 x 24 [460 x 610] 5 [44.5] 18 x 24 [460 x 610] 6 [53.4] 24 x 36 [610 x 914] 12 [106.8] 30 x 36 [ 762 x 914] 12 [106.8] 36 x 48 [914 x 1219] 6 [53.4] 30 x 36 [762 x 914] Note: All part numbers are RoHS compliant. 152 Catalog 1307819 Revised 8-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 AMPMODU Interconnection System Application Tooling for Post Insertion Tyco Electronics offers a wide range of application tooling solutions ranging from stand alone manual insertion systems through fully automatic inline systems. Please contact your local Tyco Electronics representative or the Tyco Electronics Tooling Assistance Center at 1-800-722-1111 for help in finding the right solution to meet your particular requirements. Modular Insertion System Bench Machine No. 217600-1 This machine uses Tyco Electronics insertion heads to install a variety of printed circuit board products at rates of 2,000 per hour. The printed circuit board is placed in a Board Holding Fixture which is attached to a two-hand controlled mechanism. The operator moves the board over the machine anvil; a switch in the anvil actuates the machine when the printed circuit board is placed on the anvil. A spotlight illuminates the insertion area. Consult Tyco Electronics for further information on this machine and the insertion heads. Application Tooling for ACTION PIN Posts 5 P300 and P350 Automatic Insertion Machines The P300 and P350 are automatic insertion machines for the application of reeled compliant pin and thru-hole products. Systems are available as stand alone or fully inline with SMEMA compatible conveyor system. Up to 3 different insertion heads can be mounted on a system allowing one machine to apply up to 3 different products. Insertion rates of up to 3 insertions per second on the P300 and up to 5 insertions per second on a P350 are possible (application dependent). PCBs up to 15.5" x 23.5" [400x600mm] on the P300 and up to 17.5" x 17.5" [450x450mm] on the P350 can be processed by high speed XY positioning tables. A wide range of options, including force monitoring, PCB vision correct, and PCB thickness measurement are available to meet your performance and production flexibility requirements. Note: All part numbers are RoHS compliant. 153 Catalog 1307819 Revised 8-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 METRIC Dimensions are millimeters over inches AMPMODU Interconnection System ACTION PIN Stacking Connector System (Non-Intermateable with AMPMODU Connectors) ACTION PIN Stacking Connector System Product Facts 5 ■ Can stack multiple printed circuit boards without the need of a mother board ■ Connect bus lines in the shortest possible distance ■ Receptacle assembly has ACTION PIN posts for solderless board mounting ■ Can be mounted onto the board simply by press fitting with Mini-Press ■ Receptacle assembly is easy to service and replace (up to 2 times) ■ Receptacle contacts are of fork design to mate with posts at two points. Virtually eliminates danger of scooping at mating/ unmating ■ Stacking dimensions are 13.4 [.528] or 19.0 [.748] when using receptacle assemblies together, and 13.9 [.547] or 19.5 [.768] when using a combination of receptacle and post header assemblies ■ Accepts 1.6 [.062] thick boards ■ Housing provided with polarization to help prevent mismating ACTION PIN Stacking Connectors are a family of two-piece connectors used to stack multiple printed circuit boards in parallel. They have been developed to provide a more reliable and economical means of compact wiring and highdensity packaging inside a variety of electronic equipment. ■ Housing made of chemicalresistant glass-filled PBT, black in color The connectors have many advanced features: they can be used to connect ■ Contacts are of copper alloy material with high spring characteristics, gold-overnickel plated ■ Post hood available to protect the post portion of receptacle contacts. Can be selected depending on stacking dimensions ■ Connectors available in sizes of 26, 30, 34, 40, 50 and 60 positions ■ Product specification: 108-5197 bus lines in the shortest possible distance without the need of a mother board, thus permitting effective utilization of space above the board; compared with other methods of jumper connection using cable connectors, they make the overall board layout more clean and straight for compact packaging. Contacts are on 2.54 x 2.54 [.100 x .100] grid. The connectors are available in sizes of 26, 30, 34, 40, 50 and 60 positions. ACTION PIN Stacking Connectors consist of a receptacle assembly, a mating post header and a post hood to protect the post portion of the receptacle assembly. A complete description of the ACTION PIN Stacking Connectors is presented on the following page (155). 154 Catalog 1307819 Revised 8-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 METRIC Dimensions are millimeters over inches AMPMODU Interconnection System ACTION PIN Stacking Connector System (Non-Intermateable with AMPMODU Connectors) (Continued) Receptacle Assembly The receptacle assembly features reliability and economy characteristic of this product line. The mating portion of its built-in receptacle contacts is a fork design, highly resilient and helps prevent damage to contacts by scooping at mating/ unmating. On the board mount side of the assembly are 0.55 [.022] square ACTION PIN posts. No soldering is required to mount the assembly on the board, the posts being simply, press fit into the board’s 0.825 [.032] diameter holes. which an outer board mount receptacle assembly is applied. The post header is preloaded with 0.50 [.022] square soldering posts. These posts are protected by the side walls of the housing. Post Hood Stacking dimensions provided by this connector line are as follows: When using the intermediary board mount receptacle assembly, this post hood is used to protect the post portion of the assembly. The post hood is available in two types: one with the housing height of 10.0 [.394] and the other with the housing height of 15.7 [.618]. They can be selected, depending on stacking dimensions. When the outer board receptacle and intermediary board receptacle assemblies are used 13.4 [.528] or 19.0 [.748]. When the intermediary board receptacle assembly and the post header assembly are used 13.9 [.547] or 19.5 [.768]. Post Header The post header is mounted onto the outer board on the other side of the board to ACTION PIN Stacking Connector System Two types of receptacle assemblies are available; one is used with an outermost board and the other with intermediary boards. A solder version is also available for the outer board mount assembly. Typical Application Receptacle Assembly (For outer board) (ACTION PIN Type) Part No.: 173145 Post Hood Part No.: 173144 Receptacle Assembly (For inner board) (ACTION PIN Type) Part No.: 173145 Post Header (Solder Type) Part No.: 173146 PC Board 1.6 [.062] thickness 5 Stacking Dim. 13.4 [.528], 19.0 [.748] Receptacle + Receptacle PC Board 1.6 [.062] thickness Stacking Dim. 13.9 [.547], 19.5 [.768] Receptacle + Post PC Board 1.6 [.062] thickness Note: All part numbers are RoHS compliant. 155 Catalog 1307819 Revised 8-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 METRIC Dimensions are millimeters over inches AMPMODU Interconnection System Post Hood (Non-Intermateable with AMPMODU Connectors) A B 2.54 [.100] Pitch X The post hood, mounted onto the post of the intermediary receptacle assembly, protects the post and serves as a header assembly when stacking several boards. Y 0.75 [.030] Hole Dia. Y 8.9 [.350] X Section X-X 2.54 [.100] 0.6* [.024] Hole Dia. * 10.0 [.394] C Material Black glass-filled PBT, 94V-0 rated Stacking Connectors, Post Hood Section Y-Y 5 Acceptable Post Length For 8.9 [.350] or 10.9 [.429] (For Stacking Dimension) 13.4 [.528] For 14.5 [.571] or 16.5 [.650] (For Stacking Dimension) 19.0 [.748] No. of Pos. 26 30 34 40 50 60 26 30 34 A 38.1 [1.500] 43.2 [1.700] 48.3 [1.900] 55.9 [2.200] 68.6 [2.700] 81.3 [3.200] 38.1 [1.500] 43.2 [1.700] 48.3 [1.900] 40 55.9 [2.200] Dimensions (See Note.) B 30.48 [1.200] 33.56 [1.321] 40.64 [1.600] 48.26 [1.900] 65.96 [2.597] 73.66 [2.900] 30.48 [1.200] 33.56 [1.321] 40.64 [1.600] 48.26 [1.900] 50 68.6 [2.700] 65.96 [2.597] 60 81.3 [3.200] 73.66 [2.900] *0.60 [.024] dia. applies to 16 holes on both sides, except Part No. 3-173144-8. C 10.0 [.394] 10.0 [.394] 10.0 [.394] 10.0 [.394] 10.0 [.394] 10.0 [.394] 15.6 [.614] 15.6 [.614] 15.6 [.614] 15.6 [.614] 15.6 [.614] 15.6 [.614] Post Hood Part Nos. 1-173144-1 173144-2 1-173144-2 173144-3 173144-4 173144-5 1-173144-3 173144-7 1-173144-4 173144-8 3-173144-8* 173144-9 1-173144-0 Note: All part numbers are RoHS compliant. 156 Catalog 1307819 Revised 8-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 METRIC Dimensions are millimeters over inches AMPMODU Interconnection System Receptacle Assemblies with ACTION PIN Posts and Solder Posts (Non-Intermateable with AMPMODU Connectors) Receptacle Assembly for Outer Board (With 0.55 [.022] Square Post) 2.54 [.100] A Y 0.5 [.020] Y 7.6 [.300] Blank width 0.69** [.027] 16.5 [.650] B 2.54 [.100] Pitch 3.7 [.146] X 6.4 [.252] Contact Area 3.7 [.146] 6.4 [.252] 2.54 [.100] Contact Area 11.9 [.469] 0.5 [.020] ACTION PIN Area Mating Area X Material and Finish L 2.54 [.100] 2.54 Pitch [.100] B Section X-X Solder Type Section X-X ACTION PIN Type Section Y-Y Application Tooling shown on page 162. 2.54 [.100] L Stacking Connectors, Receptacles Housing — Black glass-filled PBT, 94V-0 rated Contacts — Copper alloy, plated 0.00020 [.000008] gold on contact area and post mating area, gold flash on ACTION PIN tail or 0.000070 [.0000027] tin on solder tail, with entire contact underplated 0.00130 [.000050] nickel 0.5 [.020] 2.54±0.1 [.100±.004] 2.54±0.1 [.100±.004] ±0.1 B [±.004] Recommended PC Board Hole Layout PC Board Mounting Dimensions Thru hole plating Copper 0.02500-0.05000 [.000984-.001968] Land dia. 1.4 Min. [.055] Finished hole dia. 0.825±0.05 [.032±.002] 5 For Outer Board Board Thick 1.6 [.062] PCB drill hole 0.9±0.025 [.035±.0001] Type Post Length L ACTION PIN Post 4.2* Solder Post 4.2* ACTION PIN Post Board Thick 1.6 [.062] Finished hole dia. 0.8±0.05 [.031±.002] No. of Pos. Dimensions (See Note.) A B 26 30 34 40 50 60 26 30 34 40 50 35.6 [1.402] 40.6 [1.598] 45.7 [1.799] 53.3 [2.098] 66.0 [2.598] 78.7 [3.098] 35.6 [1.402] 40.6 [1.598] 45.7 [1.799] 53.3 [2.098] 66.0 [2.598] 30.48 [1.200] 35.56 [1.400] 40.64 [1.600] 48.26 [1.900] 60.96 [2.400] 73.66 [2.900] 30.48 [1.200] 35.56 [1.400] 40.64 [1.600] 48.26 [1.900] 60.96 [2.400] 60 78.7 [3.098] 73.66 [2.900] Receptacle Assembly Part Nos. 1-173145-7 173145-2 1-173145-8 173145-3 173145-4 173145-5 2-173145-8 2-173145-4 2-173145-9 2-173145-5 2-173145-6 2-173145-7 3-173145-0** **After mounted receptacle assembly is on board, dimension of extrude length from board is 2.6 [.102]. **Post Length = 17.0 [.669] , Blank Width = 0.69 [.027] (see above figure) (finished hole dia. = 1.0 [.039]). Solder Post Note: All part numbers are RoHS compliant. 157 Catalog 1307819 Revised 8-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 METRIC Dimensions are millimeters over inches AMPMODU Interconnection System Receptacle Assemblies with ACTION PIN Posts (Non-Intermateable with AMPMODU Connectors) Receptacle Assembly for Inner Board (With 0.55 [.022] Square Post) 2.54 [.100] A Y Y 7.6 [.300] B 2.54 [.100] Pitch Material and Finish Stacking Connectors, Receptacles Housing — Black glass-filled PBT, 94V-0 rated Contacts — Copper alloy, plated 0.00020 [.000008] gold on contact area and post mating area, gold flash on ACTION PIN tail or 0.000070 [.0000027] tin on solder tail, with entire contact underplated 0.00130 [.000050] nickel 3.7 [.146] X Contact Area 11.9 [.469] 0.5 [.020] ACTION PIN Area X Mating Area L 2.54 [.100] 2.54 Pitch [.100] B Application Tooling shown on page 162. 6.4 [.252] Section X-X Section Y-Y PC Board Mounting Dimensions Thru hole plating Copper 0.02500-0.05000 [.000984-.001968] 5 Land dia. 1.4 Min. [.055] 2.54±0.1 [.100±.004] Board Thick 1.6 [.062] 2.54±0.1 [.100±.004] ±0.1 B [±.004] Recommended PC Board Hole Layout For Inner Board Finished hole dia. 0.825±0.05 [.032±.002] PCB drill hole 0.9±0.025 [.035±.0001] Stacking Dimensions Post Length L 8.9 .350 13.4 [.528] 10.9 .429 No. of Pos. Dimensions (See Note.) A B 30 34 40.6 [1.598] 45.7 [1.799] 35.56 [1.400] 40.64 [1.600] 40 53.3 [2.098] 48.26 [1.900] 50 60 26 30 34 40 50 60 66.0 [2.598] 78.7 [3.098] 35.6 [1.402] 40.6 [1.598] 45.7 [1.799] 53.3 [2.098] 66.0 [2.598] 78.7 [3.098] 60.96 [2.400] 73.66 [2.900] 30.48 [1.200] 35.56 [1.400] 40.64 [1.600] 48.26 [1.900] 60.96 [2.400] 73.66 [2.900] Receptacle Assembly Part Nos. 3-173145-2 3-173145-7 3-173145-3 3-173145-1* 3-173145-4 3-173145-5 1-173145-9 173145-7 2-173145-0 173145-8 173145-9 1-173145-0 *Contact area and post mating area: 0.00050 [.000020] min. gold over 0.00130 [.000050] min. nickel plated. Note: All part numbers are RoHS compliant. 158 Catalog 1307819 Revised 8-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 METRIC Dimensions are millimeters over inches AMPMODU Interconnection System Receptacle Assemblies with ACTION PIN Posts (Non-Intermateable with AMPMODU Connectors) (Continued) For Inner Board (Continued) Stacking Dimensions Post Length L 14.5 [.571] 19.0 [.748] 16.5 [.650] No. of Pos. 26 30 34 40 50 60 26 30 34 40 50 60 Dimensions (See Note.) A B 35.6 [1.402] 40.6 [1.598] 45.7 [1.799] 53.3 [2.098] 66.0 [2.598] 78.7 [3.098] 35.6 [1.402] 40.6 [1.598] 45.7 [1.799] 53.3 [2.098] 66.0 [2.598] 78.7 [3.098] 30.48 [1.200] 35.56 [1.400] 40.64 [1.600] 48.26 [1.900] 60.96 [2.400] 73.66 [2.900] 30.48 [1.200] 35.56 [1.400] 40.64 [1.600] 48.26 [1.900] 60.96 [2.400] 73.66 [2.900] Receptacle Assembly Part Nos. 4-173145-2 3-173145-8 4-173145-3 3-173145-9 4-173145-0 4-173145-1 2-173145-1 1-173145-2 2-173145-2 1-173145-3 1-173145-4 1-173145-5 *Contact area and post mating area: 0.00050 [.000020] min. gold over 0.00130 [.000050] min. nickel plated. Stacking Connectors, Receptacles 5 Note: All part numbers are RoHS compliant. 159 Catalog 1307819 Revised 8-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 METRIC Dimensions are millimeters over inches AMPMODU Interconnection System Post Headers with Solder Posts (Non-Intermateable with AMPMODU Connectors) Post Header (With 0.55 [.022] Square Post) A 2.54 [.100] B 2.54 [.100] Pitch Y Y 8.9 [.350] X Material and Finish Housing — Black glass-filled PBT, 94V-0 rated Posts — Copper alloy, plated 0.00020 [.000008] gold on contact area, 0.000070 [.0000027] min. tin on solder tail, with entire post underplated 0.00130 [.000050] nickel 8.5 [.335] L C X 3.7 [.146] 0.5 [.020] 2.54 [.100] Pitch B Stacking Connector Post Headers Finished hole dia. 0.8±0.06 [.031±.002] Section X-X Section Y-Y PC Board Mounting Dimensions Board Thick 1.6 [.062] 2.54±0.1 [.100±.004] 5 2.54±0.1 [.100±.004] ±0.1 B [±.004] Recommended PC Board Hole Layout Stacking Dimensions Post Length L 5.8 [.228] 13.9 [.547] 7.8 [.307] Dimensions (See Note.) No. of Pos. A B C 26 30 34 38.1 [1.500] 43.2 [1.700] 48.3 [1.900] 30.48 [1.200] 35.56 [1.400] 40.64 [1.600] 10.5 [.413] 10.5 [.413] 10.5 [.413] 40 55.9 [2.200] 48.26 [1.900] 10.5 [.413] 50 60 26 30 34 68.6 [2.700] 81.3 [3.200] 38.1 [1.500] 43.2 [1.700] 48.3 [1.900] 60.96 [2.400] 73.66 [2.900] 30.48 [1.200] 35.56 [1.400] 40.64 [1.600] 10.5 [.413] 10.5 [.413] 10.5 [.413] 10.5 [.413] 10.5 [.413] 40 55.9 [2.200] 48.26 [1.900] 10.5 [.413] 50 68.6 [2.700] 60.96 [2.400] 10.5 [.413] 60 81.3 [3.200] 73.66 [2.900] 10.5 [.413] *Contact mating area: 0.00050 [.000020] min. gold over 0.00130 [.000050] min. nickel plated. Part Nos. of Post Header Assembly 3-173146-5 3-173146-1 3-173146-6 3-173146-2 3-173146-0* 3-173146-3 3-173146-4 2-173146-1 1-173146-7 2-173146-2 1-173146-8 4-173146-3* 1-173146-9 2-173146-0 Note: All part numbers are RoHS compliant. 160 Catalog 1307819 Revised 8-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 METRIC Dimensions are millimeters over inches AMPMODU Interconnection System Post Headers with Solder Posts (Non-Intermateable with AMPMODU Connectors) (Continued) Stacking Dimensions Post Length L No. of Pos. A Dimensions (See Note.) B C 26 38.1 [1.500] 30.48 [1.200] 16.1 [.634] 30 43.2 [1.700] 35.56 [1.400] 16.1 [.634] 34 48.3 [1.900] 40.64 [1.600] 16.1 [.634] 11.4 [.449] 40 55.9 [2.200] 48.26 [1.900] 16.1 [.634] 50 68.6 [2.700] 60.96 [2.400] 16.1 [.634] 60 81.3 [3.200] 73.66 [2.900] 16.1 [.634] 19.5 [.768] 26 38.1 [1.500] 30.48 [1.200] 16.1 [.634] 30 43.2 [1.700] 35.56 [1.400] 16.1 [.634] 34 48.3 [1.900] 40.64 [1.600] 16.1 [.634] 13.4 [.528] 40 55.9 [2.200] 48.26 [1.900] 16.1 [.634] 50 68.6 [2.700] 60.96 [2.400] 16.1 [.634] 60 81.3 [3.200] 73.66 [2.900] 16.1 [.634] *Contact mating area: 0.00050 [.000020] min. gold over 0.00130 [.000050] min. nickel plated. Part Nos. of Post Header Assembly 4-173146-1 3-173146-7 4-173146-2 3-173146-8 3-173146-9 4-173146-0 2-173146-8 2-173146-4 2-173146-9 2-173146-5 2-173146-6 2-173146-7 Stacking Connector Post Headers 5 Note: All part numbers are RoHS compliant. 161 Catalog 1307819 Revised 8-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 AMPMODU Interconnection System Application Tooling for ACTION PIN Stacking Connectors Mini-Press Application Tooling for ACTION PIN Stacking Connectors No. of Pos. 40 50 60 1. Insert connector into the board tentatively (Be sure that connector is in the right direction). 2. Attach insertion support plate to the leg portion of connector from below. 3. Set insertion support plate in place by butting it against Mini-Press platform. 4. By pressing Mini-Press handle down, rest the press-fit jig against connector. 5. Press handle down gently and insert connector into the board. 6. Now connector has been mounted to the board securely. Part No. 1-758030-1 1-758030-2 1-758030-3 The part numbers above include the Mini-Press unit, insertion support plate and press-fit jig. Mini-Press Unit Part No. 1-758030-3 When ordering a press-fit jig only, consult the table below. Press-fit Jig (separate order) 5 No. of Pos. 26 30 34 40 50 60 Part No. 907459-1 907459-2 907459-3 907459-4 907459-5 907459-6 Also, optional insertion support plates are obtainable by separate order to meet your specific requirements for improved board handling. Insertion Support Unit (Option) Note: All part numbers are RoHS compliant. 162 Catalog 1307819 Revised 8-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 AMPMODU Interconnection System .025 [0.64] Square Posts Bandolier Posts (Uninsulated) .010 [0.25] Typ. CL of Star B .100* [2.54] .010 [0.25] .015 [0.38] .070 [1.78] .080 [2.03] Bandolier C .100 [2.54] Post ±.002 D [±0.05] Dia. Recommended Plated Hole Size for Tin Plated Through Hole A .100 [2.54] Material and Finish Bandolier — Brass Posts — Phosphor bronze, plated as follows: Plating A — Duplex plated .000030 [0.00076] gold on contact area, .000100.000200 [0.00254-0.00508] tin on solder area, with entire post underplated .000050 [0.00127] nickel Plating B — Duplex plated .000015 [0.00038] gold on contact area, .000100.000200 [0.00254-0.00508] tin on solder area, with entire post underplated .000050 [0.00127] nickel Plating C — .000100-.000200 [0.002540.00508] tin over .000050 [0.00127] nickel on entire post .020 [0.51] Typ. Dimensions B .353 [8.97] .318 [8.08] .071 [1.80] .071 [1.80] .270 [6.86] .071 [1.80] .183 [4.65] .097 [2.46] C Customer Board .048+.006 .060 -.003 1.22+0.15 -0.08 .097 Max. [2.46] [ A PC Pad ] Post Plating/Part Nos. Plating A Plating B Plating C D .424 [10.77] .034 [0.86] .389 [9.88] .034 [0.86] .034 [0.86] .341 [8.66] .031 [0.79] .280 [7.11] .031 [0.79] 5-103577-1 5-103577-3 5-103577-5 5-146079-1 — 6-103577-3 6-103577-5 6-103577-7 — — Bandolier Insertion Head 5-103577-7 5-103577-9 6-103577-1 — 6-146079-3 904592-1 904591-1 904590-1 — — Square Posts Bandolier and Strip Form Notes: 1. Posts can be applied using Hand Tool 91419-1. *Point of measurement for plating thickness. 2. Approximate posts per reel—30,000. 3. The Bandolier Insertion head can be used on the Comp-U-Sertor II machine or the Modular Insertion System Bench machine (see page 153). 4. For PCB finishes other than tin, contact Tyco Electronics. Related Product Data Mateable Connectors — Refer to the Mating Post Selection Guide — page 90 Accessories End Shrouds — page 203 Application Tooling — page 153 Technical Documents — page 276 See mating connector for applicable product and application specifications. .100* [2.54] A Strip Form Posts (Uninsulated) C .042 [1.07] .020 Typ. [0.51] Posts — Phosphor bronze, plated as follows: Plating A — Duplex plated .000030 [0.00076] gold on contact area, .000100.000200 [0.00254-0.00508] tin on solder area, with entire post underplated .000050 [0.00127] nickel Plating B — Duplex plated .000015 [0.00038] gold on contact area, .000100.000200 [0.00254-0.00508] tin on solder area, with entire post underplated .000050 [0.00127] nickel Plating C — .000030 [0.00076] gold over .000050 [0.00127] nickel on entire post Plating D — .000100-.000200 [0.002540.00508] tin over .000050 [0.00127] nickel on entire post A .210 [5.33] .278 [7.06] .278 [7.06] .278 [7.06] .318 [8.08] 5 PC Pad Localized Tin Plate Area B Material and Finish .036±.002 [0.91±0.05] Recommended Plated Hole Size for Tin Plated Through Hole Localized Gold Plate Area Customer Board .050 [1.27] Dimensions B C .227 [5.77] .437 [11.10] .165 [4.19] .443 [11.25] .284 [7.21] .562 [14.27] .738 [18.75] 1.016 [25.81] .165 [4.19] .483 [14.27] .100 [2.54] Plating A — 5-87623-1 — — — Post Plating/Part Nos. Plating B Plating C — 1-87878-6 5-87623-4 1-87022-1 — 1-87022-3 — 1-87022-2 — 4-87022-1 Plating D 1-87022-4 1-87022-0 — 1-87022-4 4-87022-3 Post/Tab Insertion Head — 904507-1 — — — Notes: 1. Approximate Posts per reel—20,000. *Point of measurement for plating thickness. 2. Other post lengths are available, consult Tyco Electronics. 3. The Post/Tab Insertion Head can be used on the Comp-U-Sertor II machine or the Modular Insertion System Bench machine (see page 153). 4. For PCB finishes other than tin, contact Tyco Electronics. Note: All part numbers are RoHS compliant. 163 Catalog 1307819 Revised 8-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 AMPMODU Interconnection System AMPMODU .025 [0.64] Square Continuous Posts Features of .025 [0.64] Square Continuous Posts ■ Brass drawn wire for posts ■ .400 to 1.000 [10.16 to 25.40] overall pin length (.010 [0.25] increments) ■ Plating Options: Tin 15µ in. gold 30µ in. gold ■ Star feature also available Benefits ■ Less expensive than bandolier style posts ■ Can be placed on printed circuit boards at any desired centerline ■ Less scrap material (no carrier strip) .025 Square Continuous Posts Technical Documents — page 276 Application Specification 114-13011 5 Tyco Electronics now offers AMPMODU .025 [0.64] Square Continuous Posts. These posts can be used instead of the original posts that come on a bandolier style carrier strip. These posts are on a reel, but the posts are ‘notched’ at the desired length (no carrier strip is needed). This feature allows more versatility by providing post lengths from .400 to 1.000 [10.16 to 25.40], available in increments of .010 [0.25]. The posts are brass drawn wire and are inserted into a printed circuit board via application tooling at any centerline configuration. They can be used for wire wrap applications or mated to a receptacle. The current rating is 3 amps. The posts are available plated with tin, 15µ in. gold, or 30µ in. gold. Other platings are available upon request. Tyco Electronics application tooling is a modular head (Part Number 904641-1) placed on the Modular Insertion System Bench Machine (Part Number 217600-1.) Note: All part numbers are RoHS compliant. 164 Catalog 1307819 Revised 8-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 AMPMODU Interconnection System AMPMODU .025 [0.64] Square Continuous Posts (Continued) Pre-Plated Tin Part Number Square Square with Star 147333-1 147433-1 147333-2 147433-2 147333-3 147433-3 147333-4 147433-4 147333-5 147433-5 147333-6 147433-6 147333-7 147433-7 147333-8 147433-8 147333-9 147433-9 1-147333-0 1-147433-0 1-147333-1 1-147433-1 1-147333-2 1-147433-2 1-147333-3 1-147433-3 1-147333-4 1-147433-4 1-147333-5 1-147433-5 1-147333-6 1-147433-6 1-147333-7 1-147433-7 1-147333-8 1-147433-8 1-147333-9 1-147433-9 2-147333-0 2-147433-0 2-147333-1 2-147433-1 Description Post Length 0.400 [10.16] 0.410 [10.41] 0.420 [10.67] 0.430 [10.92] 0.440 [11.18] 0.450 [11.43] 0.460 [11.68] 0.470 [11.94] 0.480 [12.19] 0.490 [12.45] 0.500 [12.70] 0.510 [12.95] 0.520 [13.21] 0.530 [13.46] 0.540 [13.72] 0.550 [13.97] 0.560 [14.22] 0.570 [14.48] 0.580 [14.73] 0.590 [14.99] 0.600 [15.24] Part Number Square Square with Star 2-147333-2 2-147433-2 2-147333-3 2-147433-3 2-147333-4 2-147433-4 2-147333-5 2-147433-5 2-147333-6 2-147433-6 2-147333-7 2-147433-7 2-147333-8 2-147433-8 2-147333-9 2-147433-9 3-147333-0 3-147433-0 3-147333-1 3-147433-1 3-147333-2 3-147433-2 3-147333-3 3-147433-3 3-147333-4 3-147433-4 3-147333-5 3-147433-5 3-147333-6 3-147433-6 3-147333-7 3-147433-7 3-147333-8 3-147433-8 3-147333-9 3-147433-9 4-147333-0 4-147433-0 4-147333-1 4-147433-1 4-147333-2 4-147433-2 Description Post Length 0.610 [15.49] 0.620 [15.75] 0.630 [16.00] 0.640 [16.26] 0.650 [16.51] 0.660 [16.76] 0.670 [17.02] 0.680 [17.27] 0.690 [17.53] 0.700 [17.78] 0.710 [18.03] 0.720 [18.29] 0.730 [18.54] 0.740 [18.80] 0.750 [19.05] 0.760 [19.30] 0.770 [19.56] 0.780 [19.81] 0.790 [20.07] 0.800 [20.32] 0.810 [20.57] Part Number Square Square with Star 4-147333-3 4-147433-3 4-147333-4 4-147433-4 4-147333-5 4-147433-5 4-147333-6 4-147433-6 4-147333-7 4-147433-7 4-147333-8 4-147433-8 4-147333-9 4-147433-9 5-147333-0 5-147433-0 5-147333-1 5-147433-1 5-147333-2 5-147433-2 5-147333-3 5-147433-3 5-147333-4 5-147433-4 5-147333-5 5-147433-5 5-147333-6 5-147433-6 5-147333-7 5-147433-7 5-147333-8 5-147433-8 5-147333-9 5-147433-9 6-147333-0 6-147433-0 6-147333-1 6-147433-1 Description Post Length 0.820 [20.83] 0.830 [21.08] 0.840 [21.34] 0.850 [21.59] 0.860 [21.84] 0.870 [22.10] 0.880 [22.35] 0.890 [22.61] 0.900 [22.86] 0.910 [23.11] 0.920 [23.37] 0.930 [23.62] 0.940 [23.88] 0.950 [24.13] 0.960 [24.38] 0.970 [24.64] 0.980 [24.89] 0.990 [25.15] 1.000 [25.40] Description Post Length 0.400 [10.16] 0.410 [10.41] 0.420 [10.67] 0.430 [10.92] 0.440 [11.18] 0.450 [11.43] 0.460 [11.68] 0.470 [11.94] 0.480 [12.19] 0.490 [12.45] 0.500 [12.70] 0.510 [12.95] 0.520 [13.21] 0.530 [13.46] 0.540 [13.72] 0.550 [13.97] 0.560 [14.22] 0.570 [14.48] 0.580 [14.73] 0.590 [14.99] 0.600 [15.24] Part Number Square Square with Star 2-147334-2 2-147434-2 2-147334-3 2-147434-3 2-147334-4 2-147434-4 2-147334-5 2-147434-5 2-147334-6 2-147434-6 2-147334-7 2-147434-7 2-147334-8 2-147434-8 2-147334-9 2-147434-9 3-147334-0 3-147434-0 3-147334-1 3-147434-1 3-147334-2 3-147434-2 3-147334-3 3-147434-3 3-147334-4 3-147434-4 3-147334-5 3-147434-5 3-147334-6 3-147434-6 3-147334-7 3-147434-7 3-147334-8 3-147434-8 3-147334-9 3-147434-9 4-147334-0 4-147434-0 4-147334-1 4-147434-1 4-147334-2 4-147434-2 Description Post Length 0.610 [15.49] 0.620 [15.75] 0.630 [16.00] 0.640 [16.26] 0.650 [16.51] 0.660 [16.76] 0.670 [17.02] 0.680 [17.27] 0.690 [17.53] 0.700 [17.78] 0.710 [18.03] 0.720 [18.29] 0.730 [18.54] 0.740 [18.80] 0.750 [19.05] 0.760 [19.30] 0.770 [19.56] 0.780 [19.81] 0.790 [20.07] 0.800 [20.32] 0.810 [20.57] Part Number Square Square with Star 4-147334-3 4-147434-3 4-147334-4 4-147434-4 4-147334-5 4-147434-5 4-147334-6 4-147434-6 4-147334-7 4-147434-7 4-147334-8 4-147434-8 4-147334-9 4-147434-9 5-147334-0 5-147434-0 5-147334-1 5-147434-1 5-147334-2 5-147434-2 5-147334-3 5-147434-3 5-147334-4 5-147434-4 5-147334-5 5-147434-5 5-147334-6 5-147434-6 5-147334-7 5-147434-7 5-147334-8 5-147434-8 5-147334-9 5-147434-9 6-147334-0 6-147434-0 6-147334-1 6-147434-1 Description Post Length 0.820 [20.83] 0.830 [21.08] 0.840 [21.34] 0.850 [21.59] 0.860 [21.84] 0.870 [22.10] 0.880 [22.35] 0.890 [22.61] 0.900 [22.86] 0.910 [23.11] 0.920 [23.37] 0.930 [23.62] 0.940 [23.88] 0.950 [24.13] 0.960 [24.38] 0.970 [24.64] 0.980 [24.89] 0.990 [25.15] 1.000 [25.40] Description Post Length 0.400 [10.16] 0.410 [10.41] 0.420 [10.67] 0.430 [10.92] 0.440 [11.18] 0.450 [11.43] 0.460 [11.68] 0.470 [11.94] 0.480 [12.19] 0.490 [12.45] 0.500 [12.70] 0.510 [12.95] 0.520 [13.21] 0.530 [13.46] 0.540 [13.72] 0.550 [13.97] 0.560 [14.22] 0.570 [14.48] 0.580 [14.73] 0.590 [14.99] 0.600 [15.24] Part Number Square Square with Star 2-147335-2 2-147435-2 2-147335-3 2-147435-3 2-147335-4 2-147435-4 2-147335-5 2-147435-5 2-147335-6 2-147435-6 2-147335-7 2-147435-7 2-147335-8 2-147435-8 2-147335-9 2-147435-9 3-147335-0 3-147435-0 3-147335-1 3-147435-1 3-147335-2 3-147435-2 3-147335-3 3-147435-3 3-147335-4 3-147435-4 3-147335-5 3-147435-5 3-147335-6 3-147435-6 3-147335-7 3-147435-7 3-147335-8 3-147435-8 3-147335-9 3-147435-9 4-147335-0 4-147435-0 4-147335-1 4-147435-1 4-147335-2 4-147435-2 Description Post Length 0.610 [15.49] 0.620 [15.75] 0.630 [16.00] 0.640 [16.26] 0.650 [16.51] 0.660 [16.76] 0.670 [17.02] 0.680 [17.27] 0.690 [17.53] 0.700 [17.78] 0.710 [18.03] 0.720 [18.29] 0.730 [18.54] 0.740 [18.80] 0.750 [19.05] 0.760 [19.30] 0.770 [19.56] 0.780 [19.81] 0.790 [20.07] 0.800 [20.32] 0.810 [20.57] Part Number Square Square with Star 4-147335-3 4-147435-3 4-147335-4 4-147435-4 4-147335-5 4-147435-5 4-147335-6 4-147435-6 4-147335-7 4-147435-7 4-147335-8 4-147435-8 4-147335-9 4-147435-9 5-147335-0 5-147435-0 5-147335-1 5-147435-1 5-147335-2 5-147435-2 5-147335-3 5-147435-3 5-147335-4 5-147435-4 5-147335-5 5-147435-5 5-147335-6 5-147435-6 5-147335-7 5-147435-7 5-147335-8 5-147435-8 5-147335-9 5-147435-9 6-147335-0 6-147435-0 6-147335-1 6-147435-1 Description Post Length 0.820 [20.83] 0.830 [21.08] 0.840 [21.34] 0.850 [21.59] 0.860 [21.84] 0.870 [22.10] 0.880 [22.35] 0.890 [22.61] 0.900 [22.86] 0.910 [23.11] 0.920 [23.37] 0.930 [23.62] 0.940 [23.88] 0.950 [24.13] 0.960 [24.38] 0.970 [24.64] 0.980 [24.89] 0.990 [25.15] 1.000 [25.40] Pre-Plated 15µ in. Gold .025 Square Continuous Posts Part Number Square Square with Star 147334-1 147434-1 147334-2 147434-2 147334-3 147434-3 147334-4 147434-4 147334-5 147434-5 147334-6 147434-6 147334-7 147434-7 147334-8 147434-8 147334-9 147434-9 1-147334-0 1-147434-0 1-147334-1 1-147434-1 1-147334-2 1-147434-2 1-147334-3 1-147434-3 1-147334-4 1-147434-4 1-147334-5 1-147434-5 1-147334-6 1-147434-6 1-147334-7 1-147434-7 1-147334-8 1-147434-8 1-147334-9 1-147434-9 2-147334-0 2-147434-0 2-147334-1 2-147434-1 5 Pre-Plated 30µ in. Gold Part Number Square Square with Star 147335-1 147435-1 147335-2 147435-2 147335-3 147435-3 147335-4 147435-4 147335-5 147435-5 147335-6 147435-6 147335-7 147435-7 147335-8 147435-8 147335-9 147435-9 1-147335-0 1-147435-0 1-147335-1 1-147435-1 1-147335-2 1-147435-2 1-147335-3 1-147435-3 1-147335-4 1-147435-4 1-147335-5 1-147435-5 1-147335-6 1-147435-6 1-147335-7 1-147435-7 1-147335-8 1-147435-8 1-147335-9 1-147435-9 2-147335-0 2-147435-0 2-147335-1 2-147435-1 Note: All part numbers are RoHS compliant. 165 Catalog 1307819 Revised 8-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 AMPMODU Interconnection System AMPMODU .045 [1.14] Square Continuous Posts Features of .045 [1.14] Square Continuous Posts ■ Brass drawn wire for posts ■ .400 to 1.000 [10.16 to 25.40] overall pin length (.010 [0.25] increments) ■ Plating Options: Tin 15µ in. gold 30µ in. gold ■ Star feature also available Benefits ■ Less expensive than bandolier style posts ■ Can be placed on printed circuit boards at any desired centerline ■ Less scrap material (no carrier strip) .045 Square Continuous Posts Technical Documents — page 276 Application Specification 114-13011 5 Tyco Electronics now offers AMPMODU .045 [1.14] Square Continuous Posts. These posts can be used instead of the original posts that come on a bandolier style carrier strip. These posts are on a reel, but the posts are ‘notched’ at the desired length (no carrier strip is needed). This feature allows more versatility by providing post lengths from .400 to 1.000 [10.16 to 25.40], available in increments of .010 [0.25]. The posts are brass drawn wire and are inserted into a printed circuit board via application tooling at any centerline configuration. They can be used for wire wrap applications or mated to a receptacle. Potential industries include: building systems, commercial/home equipment, household appliances, home power tools and equipment. The current rating is 7 amps. The posts are available plated with tin, 15µ in. gold, or 30µ in. gold. Other platings are available upon request. Tyco Electronics application tooling is a modular head (Part Number 904640-1) placed on the Modular Insertion System Bench Machine (Part Number 217600-1.) Note: All part numbers are RoHS compliant. 166 Catalog 1307819 Revised 8-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 AMPMODU Interconnection System AMPMODU .045 [1.14] Square Continuous Posts (Continued) Pre-Plated Tin Part Number Square Square with Star 147070-1 147436-1 147070-2 147436-2 147070-3 147436-3 147070-4 147436-4 147070-5 147436-5 147070-6 147436-6 147070-7 147436-7 147070-8 147436-8 147070-9 147436-9 1-147070-0 1-147436-0 1-147070-1 1-147436-1 1-147070-2 1-147436-2 1-147070-3 1-147436-3 1-147070-4 1-147436-4 1-147070-5 1-147436-5 1-147070-6 1-147436-6 1-147070-7 1-147436-7 1-147070-8 1-147436-8 1-147070-9 1-147436-9 2-147070-0 2-147436-0 2-147070-1 2-147436-1 Description Post Length 0.400 [10.16] 0.410 [10.41] 0.420 [10.67] 0.430 [10.92] 0.440 [11.18] 0.450 [11.43] 0.460 [11.68] 0.470 [11.94] 0.480 [12.19] 0.490 [12.45] 0.500 [12.70] 0.510 [12.95] 0.520 [13.21] 0.530 [13.46] 0.540 [13.72] 0.550 [13.97] 0.560 [14.22] 0.570 [14.48] 0.580 [14.73] 0.590 [14.99] 0.600 [15.24] Part Number Square Square with Star 2-147070-2 2-147436-2 2-147070-3 2-147436-3 2-147070-4 2-147436-4 2-147070-5 2-147436-5 2-147070-6 2-147436-6 2-147070-7 2-147436-7 2-147070-8 2-147436-8 2-147070-9 2-147436-9 3-147070-0 3-147436-0 3-147070-1 3-147436-1 3-147070-2 3-147436-2 3-147070-3 3-147436-3 3-147070-4 3-147436-4 3-147070-5 3-147436-5 3-147070-6 3-147436-6 3-147070-7 3-147436-7 3-147070-8 3-147436-8 3-147070-9 3-147436-9 4-147070-0 4-147436-0 4-147070-1 4-147436-1 4-147070-2 4-147436-2 Description Post Length 0.610 [15.49] 0.620 [15.75] 0.630 [16.00] 0.640 [16.26] 0.650 [16.51] 0.660 [16.76] 0.670 [17.02] 0.680 [17.27] 0.690 [17.53] 0.700 [17.78] 0.710 [18.03] 0.720 [18.29] 0.730 [18.54] 0.740 [18.80] 0.750 [19.05] 0.760 [19.30] 0.770 [19.56] 0.780 [19.81] 0.790 [20.07] 0.800 [20.32] 0.810 [20.57] Part Number Square Square with Star 4-147070-3 4-147436-3 4-147070-4 4-147436-4 4-147070-5 4-147436-5 4-147070-6 4-147436-6 4-147070-7 4-147436-7 4-147070-8 4-147436-8 4-147070-9 4-147436-9 5-147070-0 5-147436-0 5-147070-1 5-147436-1 5-147070-2 5-147436-2 5-147070-3 5-147436-3 5-147070-4 5-147436-4 5-147070-5 5-147436-5 5-147070-6 5-147436-6 5-147070-7 5-147436-7 5-147070-8 5-147436-8 5-147070-9 5-147436-9 6-147070-0 6-147436-0 6-147070-1 6-147436-1 Description Post Length 0.820 [20.83] 0.830 [21.08] 0.840 [21.34] 0.850 [21.59] 0.860 [21.84] 0.870 [22.10] 0.880 [22.35] 0.890 [22.61] 0.900 [22.86] 0.910 [23.11] 0.920 [23.37] 0.930 [23.62] 0.940 [23.88] 0.950 [24.13] 0.960 [24.38] 0.970 [24.64] 0.980 [24.89] 0.990 [25.15] 1.000 [25.40] Description Post Length 0.400 [10.16] 0.410 [10.41] 0.420 [10.67] 0.430 [10.92] 0.440 [11.18] 0.450 [11.43] 0.460 [11.68] 0.470 [11.94] 0.480 [12.19] 0.490 [12.45] 0.500 [12.70] 0.510 [12.95] 0.520 [13.21] 0.530 [13.46] 0.540 [13.72] 0.550 [13.97] 0.560 [14.22] 0.570 [14.48] 0.580 [14.73] 0.590 [14.99] 0.600 [15.24] Part Number Square Square with Star 2-147071-2 2-147437-2 2-147071-3 2-147437-3 2-147071-4 2-147437-4 2-147071-5 2-147437-5 2-147071-6 2-147437-6 2-147071-7 2-147437-7 2-147071-8 2-147437-8 2-147071-9 2-147437-9 3-147071-0 3-147437-0 3-147071-1 3-147437-1 3-147071-2 3-147437-2 3-147071-3 3-147437-3 3-147071-4 3-147437-4 3-147071-5 3-147437-5 3-147071-6 3-147437-6 3-147071-7 3-147437-7 3-147071-8 3-147437-8 3-147071-9 3-147437-9 4-147071-0 4-147437-0 4-147071-1 4-147437-1 4-147071-2 4-147437-2 Description Post Length 0.610 [15.49] 0.620 [15.75] 0.630 [16.00] 0.640 [16.26] 0.650 [16.51] 0.660 [16.76] 0.670 [17.02] 0.680 [17.27] 0.690 [17.53] 0.700 [17.78] 0.710 [18.03] 0.720 [18.29] 0.730 [18.54] 0.740 [18.80] 0.750 [19.05] 0.760 [19.30] 0.770 [19.56] 0.780 [19.81] 0.790 [20.07] 0.800 [20.32] 0.810 [20.57] Part Number Square Square with Star 4-147071-3 4-147437-3 4-147071-4 4-147437-4 4-147071-5 4-147437-5 4-147071-6 4-147437-6 4-147071-7 4-147437-7 4-147071-8 4-147437-8 4-147071-9 4-147437-9 5-147071-0 5-147437-0 5-147071-1 5-147437-1 5-147071-2 5-147437-2 5-147071-3 5-147437-3 5-147071-4 5-147437-4 5-147071-5 5-147437-5 5-147071-6 5-147437-6 5-147071-7 5-147437-7 5-147071-8 5-147437-8 5-147071-9 5-147437-9 6-147071-0 6-147437-0 6-147071-1 6-147437-1 Description Post Length 0.820 [20.83] 0.830 [21.08] 0.840 [21.34] 0.850 [21.59] 0.860 [21.84] 0.870 [22.10] 0.880 [22.35] 0.890 [22.61] 0.900 [22.86] 0.910 [23.11] 0.920 [23.37] 0.930 [23.62] 0.940 [23.88] 0.950 [24.13] 0.960 [24.38] 0.970 [24.64] 0.980 [24.89] 0.990 [25.15] 1.000 [25.40] Description Post Length 0.400 [10.16] 0.410 [10.41] 0.420 [10.67] 0.430 [10.92] 0.440 [11.18] 0.450 [11.43] 0.460 [11.68] 0.470 [11.94] 0.480 [12.19] 0.490 [12.45] 0.500 [12.70] 0.510 [12.95] 0.520 [13.21] 0.530 [13.46] 0.540 [13.72] 0.550 [13.97] 0.560 [14.22] 0.570 [14.48] 0.580 [14.73] 0.590 [14.99] 0.600 [15.24] Part Number Square Square with Star 2-147072-2 2-147438-2 2-147072-3 2-147438-3 2-147072-4 2-147438-4 2-147072-5 2-147438-5 2-147072-6 2-147438-6 2-147072-7 2-147438-7 2-147072-8 2-147438-8 2-147072-9 2-147438-9 3-147072-0 3-147438-0 3-147072-1 3-147438-1 3-147072-2 3-147438-2 3-147072-3 3-147438-3 3-147072-4 3-147438-4 3-147072-5 3-147438-5 3-147072-6 3-147438-6 3-147072-7 3-147438-7 3-147072-8 3-147438-8 3-147072-9 3-147438-9 4-147072-0 4-147438-0 4-147072-1 4-147438-1 4-147072-2 4-147438-2 Description Post Length 0.610 [15.49] 0.620 [15.75] 0.630 [16.00] 0.640 [16.26] 0.650 [16.51] 0.660 [16.76] 0.670 [17.02] 0.680 [17.27] 0.690 [17.53] 0.700 [17.78] 0.710 [18.03] 0.720 [18.29] 0.730 [18.54] 0.740 [18.80] 0.750 [19.05] 0.760 [19.30] 0.770 [19.56] 0.780 [19.81] 0.790 [20.07] 0.800 [20.32] 0.810 [20.57] Part Number Square Square with Star 4-147072-3 4-147438-3 4-147072-4 4-147438-4 4-147072-5 4-147438-5 4-147072-6 4-147438-6 4-147072-7 4-147438-7 4-147072-8 4-147438-8 4-147072-9 4-147438-9 5-147072-0 5-147438-0 5-147072-1 5-147438-1 5-147072-2 5-147438-2 5-147072-3 5-147438-3 5-147072-4 5-147438-4 5-147072-5 5-147438-5 5-147072-6 5-147438-6 5-147072-7 5-147438-7 5-147072-8 5-147438-8 5-147072-9 5-147438-9 6-147072-0 6-147438-0 6-147072-1 6-147438-1 Description Post Length 0.820 [20.83] 0.830 [21.08] 0.840 [21.34] 0.850 [21.59] 0.860 [21.84] 0.870 [22.10] 0.880 [22.35] 0.890 [22.61] 0.900 [22.86] 0.910 [23.11] 0.920 [23.37] 0.930 [23.62] 0.940 [23.88] 0.950 [24.13] 0.960 [24.38] 0.970 [24.64] 0.980 [24.89] 0.990 [25.15] 1.000 [25.40] Pre-Plated 15µ in. Gold .045 Square Continuous Posts Part Number Square Square with Star 147071-1 147437-1 147071-2 147437-2 147071-3 147437-3 147071-4 147437-4 147071-5 147437-5 147071-6 147437-6 147071-7 147437-7 147071-8 147437-8 147071-9 147437-9 1-147071-0 1-147437-0 1-147071-1 1-147437-1 1-147071-2 1-147437-2 1-147071-3 1-147437-3 1-147071-4 1-147437-4 1-147071-5 1-147437-5 1-147071-6 1-147437-6 1-147071-7 1-147437-7 1-147071-8 1-147437-8 1-147071-9 1-147437-9 2-147071-0 2-147437-0 2-147071-1 2-147437-1 5 Pre-Plated 30µ in. Gold Part Number Square Square with Star 147072-1 147438-1 147072-2 147438-2 147072-3 147438-3 147072-4 147438-4 147072-5 147438-5 147072-6 147438-6 147072-7 147438-7 147072-8 147438-8 147072-9 147438-9 1-147072-0 1-147438-0 1-147072-1 1-147438-1 1-147072-2 1-147438-2 1-147072-3 1-147438-3 1-147072-4 1-147438-4 1-147072-5 1-147438-5 1-147072-6 1-147438-6 1-147072-7 1-147438-7 1-147072-8 1-147438-8 1-147072-9 1-147438-9 2-147072-0 2-147438-0 2-147072-1 2-147438-1 Note: All part numbers are RoHS compliant. 167 Catalog 1307819 Revised 8-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 AMPMODU Interconnection System Receptacle Assemblies, Horizontal Mount Horizontal Mount, Receptacle Assemblies Product Facts ■ All receptacle assemblies are end stackable ■ Contact design employs dual cantilever beams with built-in anti-overstress feature ■ Closed entry housings help prevent post stubbing ■ Wide range of sizes available ■ Other versions available upon request ■ Housings made of high temperature, surface mount compatible thermoplastic material, 94V-O rated ■ Duplex gold and matte tin plated contacts have full nickel underplate ■ Housings feature PC board standoffs ■ Solder tails accommodate a PC board thickness of .062 [1.57] ■ Recognized under the Component Program of Underwriters Laboratories Inc., File No. E28476 R 5 ■ Certified by Canadian Standards Association, File No. LR 7189 R Horizontal Mount receptacle assemblies are designed to reliably and economically meet the packaging and interconnection requirements of today’s electronics industry, generally for applications using the mother/daughter board arrangement. This product line is offered in both single and double row configurations. The .100 [2.54] centerline assemblies are available in a wide range of position sizes. They have end stacking capability which gives the added advantage of flexibility. The housings are made of high temperature, surface mount compatible thermoplastic material that is 94V-0 rated. Contacts are phosphor bronze, fully underplated with nickel to help prevent corrosion and are available in three plating options. The receptacle contact is an established proven design with a fully enclosed, one-piece “box” to protect the contact area. In addition, the receptacle contact has dual cantilever beams with a built-in anti-overstress feature. Standard solder tails accommodate a board thickness of .062 [1.57]. Performance Characteristics Mechanical Characteristics Electrical Characteristics Mating Force — 6.0 oz. [1.67N] per contact (max.) Unmating Force — .75 oz. [0.21N] per contact (min.) during third mating cycle Durability — 200 cycles Current Rating — 3.0 amperes (max.) for single contact; 2.0 amperes (max.) per contact when connector is fully energized Contact Resistance — 12 milliohms (max.) Insulation Resistance — 5000 megohms (min.) between adjacent contacts Dielectric Withstanding Voltage (at sea level) — 750 V rms Environmental Characteristics Operating Temperature — -65°C to +125°C 168 Catalog 1307819 Revised 8-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 AMPMODU Interconnection System Mod II Receptacle Assemblies, Single-Row, .100 [2.54] Centerline Closed Entry, End Stackable, Short Point-of-Contact, with Standoffs .320 [8.13] A .050 [1.27] (2 Plc.) .100 [2.54] Typ. .174 [4.42] Max. (Point-of-Contact) B Material and Finish .069 [1.75] .137 [3.48] 1 2 Pos. Ref. .125 [3.18] (Localized Gold Plate Area) CL B PC Board (Ref.) .310 [7.87] CL +.005 .060 -.000 .100* [2.54] Typ. .060 [ 1.52 ] +.0.13 -.000 Horizontal Mount, Receptacle Assemblies Housing — Glass-filled thermoplastic, black, 94V-0 rated Contacts — Phosphor bronze, plated as follows: Plating A — Duplex .000030 [0.00076] gold on contact area, .000150-.000300 [0.00381-0.00762] matte tin on solder area all over .000050 [0.00127] nickel Plating B — Duplex .000010 [0.000254] gold on contact area, .000150-.000300 [0.00381-0.00762] matte tin on solder area all over .000050 [0.00127] nickel Plating C — .000150-.000300 [0.00381-0.00762] matte tin on solder leads, all over .000050 [0.00127] nickel Post Entry .115 [2.92] .310 [7.87] .035±.003 Dia. [0.89±0.08] Typ. Related Product Data Mateable Headers — Refer to the Mating Post Selection Guide — page 90 Performance Characteristics — page 168 Technical Documents — page 276 Product Specification 108-25026 Application Specification 114-25018 Additional receptacle assembly sizes are available; minimum order quantities may apply. Consult Tyco Electronics. Keying Plug Part No. 86286-1 (Plugs into receptacle contact) Material — Natural color nylon Recommended PC Board Hole Layout (for .062 [1.57] thick PC board) *±.003 [±0.08] tolerances not to accumulate within one connector pattern. No. of Pos. 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 30 40 Dimensions A .200 [5.08] .300 [7.62] .400 [10.16] .500 [12.70] .600 [15.24] .700 [17.78] .800 [20.32] .900 [22.86] 1.000 [25.40] 1.100 [27.94] 1.200 [30.48] 1.300 [33.02] 1.400 [35.56] 1.500 [38.10] 1.600 [40.64] 1.700 [43.18] 1.800 [45.72] 1.900 [48.26] 2.000 [50.80] 3.000 [76.20] 4.000 [101.60] B .100 [2.54] .200 [5.08] .300 [7.62] .400 [10.16] .500 [12.70] .600 [15.24] .700 [17.78] .800 [20.32] .900 [22.86] 1.000 [25.40] 1.100 [27.94] 1.200 [30.48] 1.300 [33.02] 1.400 [35.56] 1.500 [38.10] 1.600 [40.64] 1.700 [43.18] 1.800 [45.72] 1.900 [48.26] 2.900 [73.66] 3.900 [99.06] Plating A 5535676-1 5535676-2 5535676-3 5535676-4 5535676-5 5535676-6 5535676-7 5535676-8 5535676-9 1-5535676-0 1-5535676-1 1-5535676-2 1-5535676-3 1-5535676-4 1-5535676-5 1-5535676-6 1-5535676-7 1-5535676-8 1-5535676-9 2-5535676-9 3-5535676-9 5 Contact Plating/Part Nos. Plating B 5146139-1 5146139-2 5146139-3 5146139-4 5146139-5 5146139-6 5146139-7 5146139-8 5146139-9 1-5146139-0 1-5146139-1 1-5146139-2 1-5146139-3 1-5146139-4 1-5146139-5 1-5146139-6 1-5146139-7 1-5146139-8 1-5146139-9 2-5146139-9 3-5146139-9 Plating C 5535677-1 5535677-2 5535677-3 5535677-4 5535677-5 5535677-6 5535677-7 5535677-8 5535677-9 1-5535677-0 1-5535677-1 1-5535677-2 1-5535677-3 1-5535677-4 1-5535677-5 1-5535677-6 1-5535677-7 1-5535677-8 1-5535677-9 2-5535677-9 3-5535677-9 Note: 1. Tyco Electronics recommends mating gold or duplex plated headers with duplex plated receptacle assemblies. Note: All part numbers are RoHS compliant. 169 Catalog 1307819 Revised 8-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 AMPMODU Interconnection System Mod II Receptacle Assemblies, Double-Row, .100 x .100 [2.54 x 2.54] Centerlines Closed Entry, End Stackable, Short Point-of-Contact, with Standoffs .320 [8.13] A .174 [4.42] Max. (Point-of-Contact) .050 [1.27] (2 Plc.) B .100 [2.54] Typ. .100 [2.54] .069 [1.75] Material and Finish 1 Horizontal Mount, Receptacle Assemblies Housing — Glass-filled thermoplastic, black, 94V-0 rated Contacts — Phosphor bronze, plated as follows: Plating A — Duplex .000030 [0.00076] gold on contact area, .000150-.000300 [0.00381-0.00762] matte tin on solder area all over .000050 [0.00127] nickel Plating B — Duplex .000010 [0.000254] gold on contact area, .000150-.000300 [0.00381-0.00762] matte tin on solder area all over .000050 [0.00127] nickel Plating C — .000150-.000300 [0.00381-0.00762] matte tin on solder leads, all over .000050 [0.00127] nickel 5 Technical Documents — page 276 Product Specification 108-25026 Application Specification 114-25018 Additional receptacle assembly sizes are available; minimum order quantities may apply. Consult Tyco Electronics. .238 [6.05] .115 [2.92] .310 .125 [3.18] CL [7.87] (Localized Gold Plate Area) Pos. Ref. B .100* [2.54] Typ. PC Board (Ref.) CL +.005 .060 -.000 1.52 [ .060 ] +0.13 -.000 .310 [7.87] .035±.003 Dia. [0.89±0.08] Typ. Recommended PC Board Hole Layout (for .062 [1.57] thick PC board) *±.003 [±0.08] tolerances not to accumulate within one connector pattern. Related Product Data Mateable Headers — Refer to the Mating Post Selection Guide — page 90 Performance Characteristics — page 168 2 Post Entry .118 [3.00] (Localized Gold Plate Area) No. of Pos. 4 6 8 10 12 14 16 18 20 22 24 26 28 30 32 34 36 38 40 50 60 Dimensions A B .200 [5.08] .100 [2.54] .300 [7.62] .200 [5.08] .400 [10.16] .300 [7.62] .500 [12.70] .400 [10.16] .600 [15.24] .500 [12.70] .700 [17.78] .600 [15.24] .800 [20.32] .700 [17.78] .900 [22.86] .800 [20.32] 1.000 [25.40] .900 [22.86] 1.100 [27.94] 1.000 [25.40] 1.200 [30.48] 1.100 [27.94] 1.300 [33.02] 1.200 [30.48] 1.400 [35.56] 1.300 [33.02] 1.500 [38.10] 1.400 [35.56] 1.600 [40.64] 1.500 [38.10] 1.700 [43.18] 1.600 [40.64] 1.800 [45.72] 1.700 [43.18] 1.900 [48.26] 1.800 [45.72] 2.000 [50.80] 1.900 [48.26] 2.500 [63.50] 2.400 [60.96] 3.000 [76.20] 2.900 [73.66] Plating A 6-5535512-1 6-5535512-2 6-5535512-3 6-5535512-4 5535512-1 1-5535512-7 1-5535512-8 1-5535512-6 5535512-2 1-5535512-9 5535512-3 2-5535512-0 2-5535512-1 2-5535512-2 2-5535512-3 5535512-4 5535512-5 2-5535512-4 2-5535512-5 5535512-7 3-5535512-0 Contact Plating/Part Nos. Plating B 5146140-1 5146140-2 5146140-3 5146140-4 5146140-5 5146140-6 5146140-7 5146140-8 5146140-9 1-5146140-0 1-5146140-1 1-5146140-2 1-5146140-3 1-5146140-4 1-5146140-5 1-5146140-6 1-5146140-7 1-5146140-8 1-5146140-9 2-5146140-0 2-5146140-1 Plating C 6-5102084-4 6-5102084-3 6-5102084-2 6-5102084-1 6-5102084-0 5-5102084-9 5-5102084-8 5-5102084-7 5-5102084-6 5-5102084-5 5-5102084-4 5-5102084-3 5-5102084-2 5-5102084-1 5-5102084-0 4-5102084-9 4-5102084-8 4-5102084-7 4-5102084-6 4-5102084-1 3-5102084-6 Notes: 1. Tyco Electronics recommends mating gold or duplex plated headers with duplex plated receptacle assemblies. 2. .256 [6.50] minimum positive pin stop to prevent shorting between row. Note: All part numbers are RoHS compliant. 170 Catalog 1307819 Revised 8-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 AMPMODU Interconnection System Mod II Surface Mount Horizontal Receptacle Assemblies, .100 x .100 [2.54 x 2.54] Centerline Product Facts Surface mount leads ■ All receptacle assemblies are end stackable ■ Contact design employs dual cantilever beams with built-in anti-overstress feature ■ Closed entry housings help prevent post stubbing ■ Housings made of high temperature, surface mount compatible thermoplastic material, 94 V-0 rated ■ Duplex gold and matte tin plated contacts have full nickel underplate ■ Housings feature PC board standoffs ■ Recognized under the Component Program of Underwriters Laboratories Inc., File No. E28476 Horizontal Mount, Receptacle Assemblies ■ R ■ Certified by Canadian Standards Association, File No. LR 7189 R Horizontal surface mount receptacle assemblies are designed to reliably and economically meet the packaging and interconnection requirements of today’s electronics industry as process technologies evolve from wave soldering to surface mount processing. This broad product line is offered in both single and double row configurations. The .100 [2.54] centerline assemblies are available in 2-40 (single row) positions and 4-80 (double row) positions. Housings are end stackable, which gives the advantage of added flexibility. The housings are made of high temperature material that is 94V-0 rated. Contacts are phosphor bronze, fully underplated with nickel to help prevent corrosion and are available in three plating options. 5 The receptacle contact is an established proven design, with a fully enclosed one-piece "box" to protect the contact beams with built-in anti-overstress feature. Performance Characteristics Mechanical Characteristics Electrical Characteristics Mating Force — 6.0 oz. [1.67N] per contact (max.) Unmating Force — .75 oz. [0.21N] per contact (min.) during third mating cycle Durability — 200 cycles Current Rating — 3.0 amperes (max.) for single contact; 2.0 amperes (max.) per contact when connector is fully energized Contact Resistance — 12 milliohms (max.) Insulation Resistance — 5000 megohms (min.) between adjacent contacts Dielectric Withstanding Voltage (at sea level) — 750 V rms Environmental Characteristics Operating Temperature — -65°C to +125°C 171 Catalog 1307819 Revised 8-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 AMPMODU Interconnection System Mod II Receptacle Assemblies, Single-Row, Surface Mount .100 [2.54] Centerline Closed Entry, End Stackable, Short Point-of-Contact, with Standoffs .320 [8.13] A .100 [2.54] Typ. .050 [1.27] .174 [4.42] Max. (Point-of-Contact) X Material and Finish Horizontal Mount, Receptacle Assemblies Housing — Glass-filled thermoplastic, black, 94V-0 rated Contacts — Phosphor bronze, plated as follows: Plating A — Duplex .000030 [0.00076] gold on contact area, .000150-.000300 [0.00381-0.00762] matte tin on solder area all over .000050 [0.00127] nickel Plating B — Duplex .000010 [0.000254] gold on contact area, .000150-.000300 [0.00381-0.00762] matte tin on solder area all over .000050 [0.00127] nickel Plating C — .000150-.000300 [0.00381-0.00762] matte tin on solder leads, all over .000050 [0.00127] nickel .137 [3.48] .008 .005 [0.20] [0.13] Typ. .388±.010 [9.85±0.25] Pos. No. Ref. Typ. .125 [3.18] (Localized Gold Plate Area) Section X–X .100 [2.54] Typ. .060 [1.52] Typ. .356 [9.04] .090 [2.29] Typ. Related Product Data 5 .069 [1.75] X Mateable Headers — Refer to the Mating Post Selection Guide — page 90 Performance Characteristics — page 171 Technical Documents — page 276 Product Specification 108-25026 Application Specification 114-25018 Additional receptacle assembly sizes are available; minimum order quantities may apply. Consult Tyco Electronics. Keying Plug Part No. 86286-1 (Plugs into receptacle contact) Material — Natural color nylon Recommended Etched Circuit Layout (for .040 [1.02] min. thick PC Board; .008 [0.20] thick stencil) No. of Pos. Dimension A 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 30 40 .200 [5.08] .300 [7.62] .400 [10.16] .500 [12.70] .600 [15.24] .700 [17.78] .800 [20.32] .900 [22.86] 1.000 [25.40] 1.100 [27.94] 1.200 [30.48] 1.300 [33.02] 1.400 [35.56] 1.500 [38.10] 1.600 [40.64] 1.700 [43.18] 1.800 [45.72] 1.900 [48.26] 2.000 [50.80] 3.000 [76.20] 4.000[101.60] Plating A 5147721-1 5147721-2 5147721-3 5147721-4 5147721-5 5147721-6 5147721-7 5147721-8 5147721-9 1-5147721-0 1-5147721-1 1-5147721-2 1-5147721-3 1-5147721-4 1-5147721-5 1-5147721-6 1-5147721-7 1-5147721-8 1-5147721-9 2-5147721-9 3-5147721-9 Contact Plating/Part Nos. Plating B 5147732-1 5147732-2 5147732-3 5147732-4 5147732-5 5147732-6 5147732-7 5147732-8 5147732-9 1-5147732-0 1-5147732-1 1-5147732-2 1-5147732-3 1-5147732-4 1-5147732-5 1-5147732-6 1-5147732-7 1-5147732-8 1-5147732-9 2-5147732-9 3-5147732-9 Plating C 5147733-1 5147733-2 5147733-3 5147733-4 5147733-5 5147733-6 5147733-7 5147733-8 5147733-9 1-5147733-0 1-5147733-1 1-5147733-2 1-5147733-3 1-5147733-4 1-5147733-5 1-5147733-6 1-5147733-7 1-5147733-8 1-5147733-9 2-5147733-9 3-5147733-9 Note: All part numbers are RoHS compliant. 172 Catalog 1307819 Revised 8-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 AMPMODU Interconnection System Mod II Receptacle Assemblies, Double-Row, Surface Mount .100 [2.54] Centerline Closed Entry, End Stackable, Short Point-of-Contact, with Standoffs .320 [8.13] A .100 [2.54] .174 [4.42] Max. (Point-of-Contact) .118 [3.00] (Localized Gold Plate Area) .050 [1.27] Ref. .100 [2.54] Typ. .238 [6.05] .256 [6.51] Post Stop Material and Finish .008 .005 [0.20] [0.13] Typ. .069 [1.75] .100 [2.54] Typ. Technical Documents — page 276 Product Specification 108-25026 Application Specification 114-25018 Additional receptacle assembly sizes are available; minimum order quantities may apply. Consult Tyco Electronics. Note: All part numbers are RoHS compliant. .060 [1.52] Typ. .356 [9.04] .090 [2.29] Typ. 5 Recommended Etched Circuit Layout (for .040 [1.02] min thick PC Board; .008 [0.20] thick stencil) Related Product Data Mateable Headers — Refer to the Mating Post Selection Guide — page 90 Performance Characteristics — page 171 .388±.010 [9.85±0.25] .125 [3.18] (Localized Gold Plate Area) Horizontal Mount, Receptacle Assemblies Housing — Glass-filled thermoplastic, black, 94V-0 rated Contacts — Phosphor bronze, plated as follows: Plating A — Duplex .000030 [0.00076] gold on contact area, .000150-.000300 [0.00381-0.00762] matte tin on solder area all over .000050 [0.00127] nickel Plating B — Duplex .000010 [0.000254] gold on contact area, .000150-.000300 [0.00381-0.00762] matte tin on solder area all over .000050 [0.00127] nickel Plating C — .000150-.000300 [0.00381-0.00762] matte tin on solder leads, all over .000050 [0.00127] nickel No. of Pos. 4 6 8 10 12 14 16 18 20 22 24 26 28 30 32 34 36 38 40 50 60 Dimension A .200 .300 .400 .500 .600 .700 .800 .900 1.000 1.100 1.200 1.300 1.400 1.500 1.600 1.700 1.800 1.900 2.000 2.500 3.000 [5.08] [7.62] [10.16] [12.70] [15.24] [17.78] [20.32] [22.86] [25.40] [27.94] [30.48] [33.02] [35.56] [38.10] [40.64] [43.18] [45.72] [48.26] [50.80] [63.50] [76.20] Plating A 5147722-1 5147722-2 5147722-3 5147722-4 5147722-5 5147722-6 5147722-7 5147722-8 5147722-9 1-5147722-0 1-5147722-1 1-5147722-2 1-5147722-3 1-5147722-4 1-5147722-5 1-5147722-6 1-5147722-7 1-5147722-8 1-5147722-9 2-5147722-4 2-5147722-9 Contact Plating/Part Nos. Plating B 5147734-1 5147734-2 5147734-3 5147734-4 5147734-5 5147734-6 5147734-7 5147734-8 5147734-9 1-5147734-0 1-5147734-1 1-5147734-2 1-5147734-3 1-5147734-4 1-5147734-5 1-5147734-6 1-5147734-7 1-5147734-8 1-5147734-9 2-5147734-4 2-5147734-9 Plating C 5147735-1 5147735-2 5147735-3 5147735-4 5147735-5 5147735-6 5147735-7 5147735-8 5147735-9 1-5147735-0 1-5147735-1 1-5147735-2 1-5147735-3 1-5147735-4 1-5147735-5 1-5147735-6 1-5147735-7 1-5147735-8 1-5147735-9 2-5147735-4 2-5147735-9 173 Catalog 1307819 Revised 8-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 AMPMODU Interconnection System Receptacle Assemblies, Vertical Mount Vertical Mount, Receptacle Assemblies Product Facts 5 ■ Dual-cantilever beam contact with box design ■ Single-row assemblies have .100 [2.54] centerline contact spacing; double-row assemblies have .100 x .100 [2.54 x 2.54] centerline contact spacing ■ 3 through 40 positions in single-row assemblies; 2 through 80 positions in double-row assemblies ■ Mod II Standard .340 [8.64] and Mod IV low .265 [6.73] profiles ■ Mod II and Mod IV profiles available in dual entry ■ Duplex gold and matte tin plated contacts have full nickel underplate ■ Thermoplastic housings, 94V-0 rated ■ Standoffs for easy flux cleaning ■ All throughhole assemblies are end stackable ■ Recognized under the Component Program of Underwriters Laboratories Inc., File No. E28476 R ■ Certified by Canadian Standards Association, File No. LR 7189 R Vertical receptacle assemblies are designed to reliably and economically meet the packaging and interconnection requirements of today’s electronics industry. This broad product line offers a wide variety of assembly styles and features. They are available in dual entry style, in both single and double row configurations. The .100 [2.54] centerline assemblies are available in 3-40 (single row) positions and 2-80 (double row) positions. Standard and low profile housings which are end stackable also enhance the product line giving the advantage of added flexibility. The housings are made of flame retardant material that is 94 V-0 rated. Contacts are phosphor bronze, fully underplated with nickel to help prevent corrosion and are available in three plating options. The receptacle contact is an established proven design, with a fully enclosed one-piece “box” to protect the contact beams. These assemblies are offered in .265 [6.73] (Mod IV) and .340[8.64] (Mod II) high profiles. Standard solder tails accommodate board thickness of .062 [1.57]. Product styles include single and dual tine variations. Outrigger tine styles are also available for bottom entry parallel board stacking applications. Performance Characteristics Mechanical Characteristics Electrical Characteristics Mating Force — 9.0 oz. [2.5N] per contact (max.) Unmating Force — 1.5 oz. [0.42N] per contact (min.) Durability (Tested to) — 200 cycles Current Rating — 3.0 amperes (max.) for single contact; 2.0 amperes (max.) per contact when connector is fully energized Contact Resistance — 12 milliohms (max.) Insulation Resistance — 5000 megohms (min.) between adjacent contacts Dielectric Withstanding Voltage (at sea level) — 750 V rms Environmental Characteristics Operating Temperature — -65°C to +125°C 174 Catalog 1307819 Revised 8-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 AMPMODU Interconnection System Mod II Receptacle Assemblies, Single-Row, .100 [2.54] Centerline Closed Top Entry, End Stackable, with Single Tine Contacts .020 [0.51] (Standoffs) X .340 [8.64] X .148 [3.76] A .107 [2.72] (Localized Gold Plate Area) .140 [3.56] Material and Finish .100±.003 [2.54±0.08] .115 [2.92] Ref. .050 [1.27] Max. Typ. Vertical Mount, Receptacle Assemblies Housing — Glass-filled thermoplastic, black, 94V-0 rated Contacts — Phosphor bronze, plated as follows: Plating A — Duplex .000030 [0.00076] gold on contact area, .000150-.000300 [0.00381-0.00762] matte tin on solder area all over .000050 [0.00127] nickel Plating B — Duplex .000010 [0.000254] gold on contact area, .000150-.000300 [0.00381-0.00762] matte tin on solder area all over .000050 [0.00127] nickel Plating C — .000150-.000300 [0.00381-0.00762] matte tin on solder leads, all over .000050 [0.00127] nickel Point of Contact B .035±.003 Dia. [0.89±0.08] Typ. .100 [2.54] Recommended PC Board Hole Layout Related Product Data Mateable Headers — Refer to the Mating Post Selection Guide — page 90 Performance Characteristics — page 174 Technical Documents — page 276 Product Specification 108-25022 Application Specification 114-25018 Additional receptacle assembly sizes are available; minimum order quantities may apply. Consult Tyco Electronics. Keying Plug Part No. 86286-1 (Plugs into receptacle contact) Material — Natural color nylon Dimensions No. of Pos. A B 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 30 40 .300 [7.62] .400 [10.16] .500 [12.70] .600 [15.24] .700 [17.78] .800 [20.32] .900 [22.86] 1.000 [25.40] 1.100 [27.94] 1.200 [30.48] 1.300 [33.02] 1.400 [35.56] 1.500 [38.10] 1.600 [40.64] 1.700 [43.18] 1.800 [45.72] 1.900 [48.26] 2.000 [50.80] 3.000 [76.20] 4.000 [101.60] .200 [5.08] .300 [7.62] .400 [10.16] .500 [12.70] .600 [15.24] .700 [17.78] .800 [20.32] .900 [22.86] 1.000 [25.40] 1.100 [27.94] 1.200 [30.48] 1.300 [33.02] 1.400 [35.56] 1.500 [38.10] 1.600 [40.64] 1.700 [43.18] 1.800 [45.72] 1.900 [48.26] 2.900 [73.66] 3.900 [99.06] Plating A 5-534237-1 5-534237-2 5-534237-3 5-534237-4 5-534237-5 5-534237-6 5-534237-7 5-534237-8 5-534237-9 6-534237-0 6-534237-1 6-534237-2 6-534237-3 6-534237-4 6-534237-5 6-534237-6 6-534237-7 6-534237-8 7-534237-9 8-534237-9 Contact Plating/Part Nos. Plating B 5-146386-1 6-146386-9 5-146386-2 5-146386-3 5-146386-4 5-146386-5 5-146386-6 5-146386-7 5-146386-8 5-146386-9 6-146386-0 6-146386-1 7-146386-0 7-146386-1 7-146386-2 7-146386-3 7-146386-4 6-146386-2 6-146386-8 8-146386-8 5 Plating C 5-146763-1 5-146763-2 5-146763-3 5-146763-4 5-146763-5 5-146763-6 5-146763-7 5-146763-8 5-146763-9 6-146763-0 6-146763-1 6-146763-2 6-146763-3 6-146763-4 6-146763-5 6-146763-6 6-146763-7 6-146763-8 7-146763-9 8-146763-9 Notes: 1. Tyco Electronics recommends mating gold or duplex plated headers with duplex plated receptacle assemblies. 2. To obtain the minimum mating post length, add .020 [0.51] (not including the post lead in chamfer) to the maximum point-of-contact dimension. Note: All part numbers are RoHS compliant. 175 Catalog 1307819 Revised 8-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 AMPMODU Interconnection System Mod II Receptacle Assemblies, Double-Row, .100 x .100 [2.54 x 2.54] Centerline Closed Top Entry, Side and End Stackable .100 x .100 [2.54 x 2.54] Centerline, .100 [2.54] Tine Spacing .020 [0.51] (Standoffs) .340 [8.64] A .148 [3.77] Typ. .050 [1.27] Max. Typ. Material and Finish Vertical Mount, Receptacle Assemblies Housing — Glass-filled thermoplastic, black, 94V-0 rated Contacts — Phosphor bronze, plated as follows: Plating A — Duplex .000030 [0.00076] gold on contact area, .000150-.000300 [0.00381-0.00762] matte tin on solder area all over .000050 [0.00127] nickel Plating B — Duplex .000010 [0.000254] gold on contact area, .000150-.000300 [0.00381-0.00762] matte tin on solder area all over .000050 [0.00127] nickel Plating C — .000150-.000300 [0.00381-0.00762] matte tin on solder leads, all over .000050 [0.00127] nickel 5 Related Product Data Mateable Headers — Refer to the Mating Post Selection Guide — page 90 Performance Characteristics — page 174 Technical Documents — page 276 Product Specification 108-25022 Application Specification 114-25018 Additional receptacle assembly sizes are available; minimum order quantities may apply. Consult Tyco Electronics. Keying Plug Part No. 86286-1 (Plugs into receptacle contact) Material — Natural color nylon .100±.003 [2.54±0.08] .198 [5.03] Point of Contact .107 [2.72] Typ. (Localized Gold Plate Area) .100 [2.54] Typ. .115±.010 [2.92±0.25] Ref. .100 [2.54] Typ. .100 [2.54] Typ. B .100 [2.54] Typ. .035±.003 Dia. [0.89±0.08] Recommended PC Board Hole Layout (for .062 [1.57] thick PC board) No. of Pos. 2 4 6 8 10 12 14 16 18 20 22 24 26 28 30 32 34 36 38 40 Dimensions A B .100 [2.54] — .200 [5.08] .100 [2.54] .300 [7.62] .200 [5.08] .400 [10.16] .300 [7.62] .500 [12.70] .400 [10.16] .600 [15.24] .500 [12.70] .700 [17.78] .600 [15.24] .800 [20.32] .700 [17.78] .900 [22.86] .800 [20.32] 1.000 [25.40] .900 [22.86] 1.100 [27.94] 1.000 [25.40] 1.200 [30.48] 1.100 [27.94] 1.300 [33.02] 1.200 [30.48] 1.400 [35.56] 1.300 [33.02] 1.500 [38.10] 1.400 [35.56] 1.600 [40.64] 1.500 [38.10] 1.700 [43.18] 1.600 [40.64] 1.800 [45.72] 1.700 [43.18] 1.900 [48.26] 1.800 [45.72] 2.000 [50.80] 1.900 [48.26] Plating A 5-534206-1 5-534206-2 5-534206-3 5-534206-4 5-534206-5 5-534206-6 5-534206-7 5-534206-8 5-534206-9 6-534206-0 6-534206-1 6-534206-2 6-534206-3 6-534206-4 6-534206-5 6-534206-6 6-534206-7 6-534206-8 6-534206-9 7-534206-0 Contact Plating/Part Nos. Plating B 5-147424-1 5-147424-2 5-147424-3 5-147424-4 5-147424-5 5-147424-6 5-147424-7 5-147424-8 5-147424-9 6-147424-0 6-147424-1 6-147424-2 6-147424-3 6-147424-4 6-147424-5 6-147424-6 6-147424-7 6-147424-8 6-147424-9 7-147424-0 Plating C 5-146762-8 5-146762-9 6-146762-0 5-146762-1 5-146762-2 6-146762-1 6-146762-2 6-146762-3 5-146762-3 5-146762-7 6-146762-4 6-146762-5 6-146762-6 6-146762-7 5-146762-4 6-146762-8 6-146762-9 7-146762-0 7-146762-1 5-146762-5 Notes: 1. Tyco Electronics recommends mating gold or duplex plated headers with duplex plated receptacle assemblies. 2. To obtain the minimum mating post length, add .020 [0.51] (not including the post lead in chamfer) to the maximum point-of-contact dimension. Note: All part numbers are RoHS compliant. 176 Catalog 1307819 Revised 8-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 AMPMODU Interconnection System Mod IV Receptacle Assemblies, Single-Row, .100 [2.54] Centerline Bottom Entry, End Stackable, Low Profile with Dual Tine Contacts Contact Typ. .020 Typ. [0.51] .247 Ref. [6.29] .268 Typ. [6.79] A Material and Finish .148 [3.76] Typ. A .140 [3.56] .108 [2.74] Typ. A .115 [2.92] Typ. Section A-A B Vertical Mount, Receptacle Assemblies Housing — Glass-filled thermoplastic, black, 94V-0 rated Contacts — Phosphor bronze, plated as follows: Plating A — Duplex .000030 [0.00076] gold on contact area, .000150-.000300 [0.00381-0.00762] matte tin on solder area all over .000050 [0.00127] nickel Plating B — Duplex .000010 [0.000254] gold on contact area, .000150-.000300 [0.00381-0.00762] matte tin on solder area all over .000050 [0.00127] nickel Plating C — .000150-.000300 [0.00381-0.00762] matte tin on solder leads, all over .000050 [0.00127] nickel .050 [1.27] 2 Plcs. Ø.067-.064 [1.70-1.63] Typ. .100 [2.54] Recommended PC Board Hole Layout Related Product Data Mateable Headers — Refer to the Mating Post Selection Guide — page 90 Performance Characteristics — page 174 Technical Documents — page 276 Product Specification 108-25022 Application Specification 114-25018 Additional receptacle assembly sizes are available; minimum order quantities may apply. Consult Tyco Electronics. Keying Plug Part No. 86286-1 (Plugs into receptacle contact) Material — Natural color nylon No. of Pos. 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 30 40 Dimensions A B .300 [7.62] .200 [5.08] .400 [10.16] .300 [7.62] .500 [12.70] .400 [10.16] .600 [15.24] .500 [12.70] .700 [17.78] .600 [15.24] .800 [20.32] .700 [17.78] .900 [22.86] .800 [20.32] 1.000 [25.40] .900 [22.86] 1.100 [27.94] 1.000 [25.40] 1.200 [30.48] 1.100 [27.94] 1.300 [33.02] 1.200 [30.48] 1.400 [35.56] 1.300 [33.02] 1.500 [38.10] 1.400 [35.56] 1.600 [40.64] 1.500 [38.10] 1.700 [43.18] 1.600 [40.64] 1.800 [45.72] 1.700 [43.18] 1.900 [48.26] 1.800 [45.72] 2.000 [50.80] 1.900 [48.26] 3.000 [76.20] 2.900 [73.66] 4.000 [101.60] 3.900 [99.06] Plating A 8-87879-7 8-87879-6 8-87879-8 5-87879-3 5-87879-4 5-87879-1 5-87879-5 5-87879-2 5-87879-6 5-87879-7 5-87879-8 5-87879-9 6-87879-0 6-87879-1 6-87879-2 6-87879-3 6-87879-4 6-87879-5 7-87879-5 8-87879-5 Contact Plating/Part Nos. Plating B 5-147326-1 5-147326-2 5-147326-3 5-147326-4 5-147326-5 5-147326-6 5-147326-7 5-147326-8 5-147326-9 6-147326-0 6-147326-1 6-147326-2 6-147326-3 6-147326-4 6-147326-5 6-147326-6 6-147326-7 6-147326-8 7-147326-8 8-147326-8 5 Plating C 5-102742-4 5-102742-8 5-102742-9 6-102742-0 5-102742-7 5-102742-3 5-102742-6 6-102742-1 5-102742-1 5-102742-2 6-102742-2 6-102742-3 6-102742-4 5-102742-5 6-102742-5 6-102742-6 6-102742-7 6-102742-8 7-102742-8 8-102742-8 Notes: 1. Tyco Electronics recommends mating gold or duplex plated headers with duplex plated receptacle assemblies. 2. To obtain the minimum mating post length, add .020 [0.51] (not including the post lead in chamfer) to the maximum point-of-contact dimension and .062 for recommended board thickness. Note: All part numbers are RoHS compliant. 177 Catalog 1307819 Revised 8-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 AMPMODU Interconnection System Mod IV Receptacle Assemblies, Single-Row, .100 [2.54] Centerline Closed Top Entry, End Stackable, Low Profile with Single Tine Contacts .020 [0.51] (Standoffs) X .245 [6.22] X .148 [3.76] A .140 [3.56] .107 [2.72] (Localized Gold Plate Area) Material and Finish Vertical Mount, Receptacle Assemblies Housing — Glass-filled thermoplastic, black, 94V-0 rated Contacts — Phosphor bronze, plated as follows: Plating A — Duplex .000030 [0.00076] gold on contact area, .000150-.000300 [0.00381-0.00762] matte tin on solder area all over .000050 [0.00127] nickel Plating B — Duplex .000010 [0.000254] gold on contact area, .000150-.000300 [0.00381-0.00762] matte tin on solder area all over .000050 [0.00127] nickel Plating C — .000150-.000300 [0.00381-0.00762] matte tin on solder leads, all over .000050 [0.00127] nickel Point of Contact Section XX .050 [1.27] Max. Typ. .100±.003 [2.54±0.08] .125 [3.18] Ref. B .035±.003 Dia. [0.88±0.08] Typ. .100 [2.54] Recommended PC Board Hole Layout (for .062 [1.57] thick PC board) Related Product Data 5 Mateable Headers — Refer to the Mating Post Selection Guide — page 90 Performance Characteristics — page 174 Technical Documents — page 276 Product Specification 108-25022 Application Specification 114-25018 Additional receptacle assembly sizes are available; minimum order quantities may apply. Consult Tyco Electronics. No. of Pos. 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 30 40 Dimensions A B .300 [7.62] .200 [5.08] .400 [10.16] .300 [7.62] .500 [12.70] .400 [10.16] .600 [15.24] .500 [12.70] .700 [17.78] .600 [15.24] .800 [20.32] .700 [17.78] .900 [22.86] .800 [20.32] 1.000 [25.40] .900 [22.86] 1.100 [27.94] 1.000 [25.40] 1.200 [30.48] 1.100 [27.94] 1.300 [33.02] 1.200 [30.48] 1.400 [35.56] 1.300 [33.02] 1.500 [38.10] 1.400 [35.56] 1.600 [40.64] 1.500 [38.10] 1.700 [43.18] 1.600 [40.64] 1.800 [45.72] 1.700 [43.18] 1.900 [48.26] 1.800 [45.72] 2.000 [50.80] 1.900 [48.26] 3.000 [76.20] 2.900 [73.66] 4.000 [101.60] 3.900 [99.06] Plating A 5-535541-1 5-535541-2 5-535541-3 5-535541-4 5-535541-5 5-535541-6 5-535541-7 5-535541-8 5-535541-9 6-535541-0 6-535541-1 6-535541-2 6-535541-3 6-535541-4 6-535541-5 6-535541-6 6-535541-7 6-535541-8 7-535541-9 8-535541-9 Contact Plating/Part Nos. Plating B 5-146138-1 5-146138-2 5-146138-3 5-146138-4 5-146138-5 5-146138-6 5-146138-7 5-146138-8 5-146138-9 6-146138-0 6-146138-1 6-146138-2 6-146138-3 6-146138-4 6-146138-5 6-146138-6 6-146138-7 6-146138-8 7-146138-9 8-146138-9 Plating C 5-535584-3 5-535584-4 5-535584-5 5-535584-1 5-535584-6 5-535584-7 5-535584-8 5-535584-9 6-535584-0 6-535584-1 6-535584-2 6-535584-3 6-535584-4 6-535584-5 6-535584-6 5-535584-2 6-535584-7 6-535584-8 6-535584-9 7-535584-0 Notes: 1. Tyco Electronics recommends mating gold or duplex plated headers with select gold plated receptacle assemblies. 2. To obtain the minimum mating post length, add .020 [0.51] (not including the post lead in chamfer) to the maximum point-of-contact dimension. Note: All part numbers are RoHS compliant. 178 Catalog 1307819 Revised 8-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 AMPMODU Interconnection System Mod IV Receptacle Assemblies, Double-Row, .100 x .100 [2.54 x 2.54] Centerline Closed Top Entry, End and Side Stackable, Low Profile, .100 x .100 [2.54 x 2.54] Centerline, .100 [2.54] Tine Spacing .020 [0.51] (Standoffs) .245 [6.22] A .148 [3.77] Typ. .050 [1.27] Max. Typ. .100±.003 [2.540.08] Material and Finish .198 [5.03] .107 [2.72] Typ. (Localized Gold Plate Area) .100 [2.54] Typ. .125±.010 [3.18±0.25] Typ. .100 [2.54] Typ. .100 [2.54] Typ. B .100 [2.54] Typ. Vertical Mount, Receptacle Assemblies Housing — Glass-filled thermoplastic, black, 94V-0 rated Contacts — Phosphor bronze, plated as follows: Plating A — Duplex .000030 [0.00076] gold on contact area, .000150-.000300 [0.00381-0.00762] matte tin on solder area all over .000050 [0.00127] nickel Plating B — Duplex .000010 [0.000254] gold on contact area, .000150-.000300 [0.00381-0.00762] matte tin on solder area all over .000050 [0.00127] nickel Plating C — .000150-.000300 [0.00381-0.00762] matte tin on solder leads, all over .000050 [0.00127] nickel Point of Contact .035±.003 Dia. [0.89±0.08] Recommended PC Board Hole Layout 5 Related Product Data Mateable Headers — Refer to the Mating Post Selection Guide — page 90 Performance Characteristics — page 174 Technical Documents — page 276 Product Specification 108-25022 Application Specification 114-25018 No. of Pos. 2 4 6 8 10 12 14 16 18 20 22 24 26 28 30 32 34 36 38 40 Dimensions A B .100 [2.54] — .200 [5.08] .100 [2.54] .300 [7.62] .200 [5.08] .400 [10.16] .300 [7.62] .500 [12.70] .400 [10.16] .600 [15.24] .500 [12.70] .700 [17.78] .600 [15.24] .800 [20.32] .700 [17.78] .900 [22.86] .800 [20.32] 1.000 [25.40] .900 [22.86] 1.100 [27.94] 1.000 [25.40] 1.200 [30.48] 1.100 [27.94] 1.300 [33.02] 1.200 [30.48] 1.400 [35.56] 1.300 [33.02] 1.500 [38.10] 1.400 [35.56] 1.600 [40.64] 1.500 [38.10] 1.700 [43.18] 1.600 [40.64] 1.800 [45.72] 1.700 [43.18] 1.900 [48.26] 1.800 [45.72] 2.000 [50.80] 1.900 [48.26] Plating A 5-534998-1 5-534998-2 5-534998-3 5-534998-4 5-534998-5 5-534998-6 5-534998-7 5-534998-8 5-534998-9 6-534998-0 6-534998-1 6-534998-2 6-534998-3 6-534998-4 6-534998-5 6-534998-6 6-534998-7 6-534998-8 6-534998-9 7-534998-0 Contact Plating/Part Nos. Plating B 5-535598-2 5-535598-3 5-535598-4 5-535598-5 5-535598-6 5-535598-7 5-535598-1 5-535598-8 5-535598-9 6-535598-0 6-535598-1 6-535598-2 6-535598-3 6-535598-4 6-535598-5 6-535598-6 6-535598-7 6-535598-8 6-535598-9 7-535598-0 Plating C 5-535585-3 5-535585-4 5-535585-5 5-535585-6 5-535585-1 5-535585-2 5-535585-7 5-535585-8 5-535585-9 6-535585-0 6-535585-1 6-535585-2 6-535585-3 6-535585-4 6-535585-5 6-535585-6 6-535585-7 6-535585-8 6-535585-9 7-535585-0 Notes: 1. Tyco Electronics recommends mating gold or duplex plated headers with duplex plated receptacle assemblies. 2. To obtain the minimum mating post length, add .020 [0.51] (not including the post lead in chamfer) to the maximum point-of-contact dimension. Note: All part numbers are RoHS compliant. 179 Catalog 1307819 Revised 8-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 AMPMODU Interconnection System Mod IV Receptacle Assemblies, Double-Row, .100 x .100 [2.54 x 2.54] Centerline (Continued) Keying Plug No. of Pos. Part No. 86286-1 (Plugs into receptacle contact) Material — Natural color nylon 42 44 46 48 50 52 54 56 58 60 62 64 66 68 70 72 74 76 78 80 Dimensions A B 2.100 [53.34] 2.000 [50.80] 2.200 [55.88] 2.100 [53.34] 2.300 [58.42] 2.200 [55.88] 2.400 [60.96] 2.300 [58.42] 2.500 [63.50] 2.400 [60.96] 2.600 [66.04] 2.500 [63.50] 2.700 [68.58] 2.600 [66.04] 2.800 [71.12] 2.700 [68.58] 2.900 [73.66] 2.800 [71.12] 3.000 [76.20] 2.900 [73.66] 3.100 [78.74] 3.000 [76.20] 3.200 [81.28] 3.100 [78.74] 3.300 [83.82] 3.200 [81.28] 3.400 [86.36] 3.300 [83.82] 3.500 [88.90] 3.400 [86.36] 3.600 [91.44] 3.500 [88.90] 3.700 [93.98] 3.600 [91.44] 3.800 [96.52] 3.700 [93.98] 3.900 [99.06] 3.800 [96.52] 4.000 [101.60] 3.900 [99.06] Plating A 7-534998-1 7-534998-2 7-534998-3 7-534998-4 7-534998-5 7-534998-6 7-534998-7 7-534998-8 7-534998-9 8-534998-0 8-534998-1 8-534998-2 8-534998-3 8-534998-4 8-534998-5 8-534998-6 8-534998-7 8-534998-8 8-534998-9 9-534998-0 Contact Plating/Part Nos. Plating B 7-535598-4 7-535598-5 7-535598-6 7-535598-7 7-535598-1 7-535598-8 7-535598-9 8-535598-0 8-535598-1 7-535598-2 8-535598-2 8-535598-3 8-535598-4 8-535598-5 8-535598-6 8-535598-7 8-535598-8 8-535598-9 9-535598-0 7-535598-3 Plating C 7-535585-4 7-535585-5 7-535585-6 7-535585-7 7-535585-1 7-535585-8 7-535585-9 8-535585-0 8-535585-1 7-535585-2 8-535585-2 8-535585-3 8-535585-4 8-535585-5 8-535585-6 8-535585-7 8-535585-8 8-535585-9 9-535585-0 7-535585-3 Vertical Mount, Receptacle Assemblies Notes: 1. Tyco Electronics recommends mating gold or duplex plated headers with duplex plated receptacle assemblies. 2. To obtain the minimum mating post length, add .020 [0.51] (not including the post lead in chamfer) to the maximum point-of-contact dimension. 5 Note: All part numbers are RoHS compliant. 180 Catalog 1307819 Revised 8-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208