MACOM 917697-1

Catalog 82181
Revised 4-08
tycoelectronics.com
82181–7.5M–LUG–FP–4-08–2–0G3B
Soft Shell Pin and Socket Connectors
Tyco Electronics Corporation
Harrisburg, PA
AMP Soft Shell Pin
and Socket Connectors
Soft Shell
Pin and Socket Connectors
Restriction on the use of
Hazardous Substances
(RoHS)
At Tyco Electronics, we’re
ready to support your RoHS
requirements. We’ve
assessed more than 1.5
million end
items/components for RoHS
compliance, and issued
new part numbers where
any change was required to
eliminate the restricted
materials.
Part numbers in this catalog
are RoHS Compliant, unless
marked otherwise. These
products comply with
European Union Directive
2002/95/EC, as amended
1 January 2006, that
restricts the use of lead,
mercury, cadmium, hexavalent chromium, PBB, and
PBDE in certain electrical
and electronic products
sold into the EU as of 1 July
2006.
Note: For purposes of this
Catalog, included within
the definition of RoHS
Compliant are products that
are clearly “Out of Scope”
of the RoHS Directive such
as hand tools and other
non-electrical accessories.
Information regarding RoHS
compliance is provided
based on reasonable
inquiry of our suppliers and
represents our current
actual knowledge based on
the information provided by
our suppliers. This information is subject to change.
For latest compliance
status, refer to our website
referenced at right.
AMP
Getting the Information
You Need
Our comprehensive on-line
RoHS Customer Support
Center provides a forum to
answer your questions and
support your RoHS needs.
A RoHS FAQ (Frequently
Asked Questions) is available with links to more
detailed information. You
can also submit RoHS
questions and receive a
response within 24 hours
during a normal work week.
The Support Center also
provides:
■
Cross-Reference from
Non-compliant to
Compliant Products
■
Ability to browse RoHS
Compliant Products in our
on-line catalog
■
Downloadable Technical
Data
■
Customer Information
Presentation
■
More detailed information
regarding the definitions
used above
So whatever your questions
when it comes to RoHS, we
have the answers at
www.tycoelectronics.com/
leadfree
RoHS
Customer
Support
Center
©1977-1980, 1983, 1986, 1988,
1992-1995, 1997, 1998, 2001, 2003,
2006 and 2007 by Tyco Electronics
Corporation. All Rights Reserved.
2
Catalog 82181
Revised 4-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
Catalog 82181
Revised 4-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
AMP-DUAC
125
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
Universal MATE-N-LOK
Universal MATE-N-LOK II
.156 MATE-N-LOK
189
203
3-4
2-15
1-15
2-9
1-16
1-15
2-6
2-24
2-24
2-36
2-24
1-24
1-12
3-12
2
2
1-9
2-6
2-24
2-13
No. of
Positions
(.390) 9.91
(.250) 6.35
(.250) 6.35
(.240) 6.10
(.200) 5.08
(.198) 5.03
(.197) 5.00
(.165) 4.20
(.165) 4.20
(.165) 4.20
(.163) 4.14
(.163) 4.14
(.156) 3.96
(.256) 6.50
(.312) 7.92
(.512) 13.00
(.145) 3.68
(.137) 3.50
(.118) 3.00
(.098) 2.50
Centerline
(in) mm
20-10
30-10
30-10
20-10
30-14
14-24
24-16
26-18
26-18
26-18
30-16
30-16
26-16
30-18
26-18
30-20
26-20
Wire
Size
(AWG)
(.185) 4.70
(.200) 5.08
(.200) 5.08
(.180) 4.57
(.130) 3.30
(.180) 4.57
(.122) 3.10
(.130) 3.30
(.094) 2.39
(.115) 2.92
(.126) 3.20
(.126) 3.20
(.122) 3.10
(.110) 2.79
(.106) 2.70
(.060) 1.52
(.071) 1.80
Wire
Insulation Dia.
Max. (in) mm
32.5
19
19
28
19
13
10
9
9
9
10.5
9.5
14
7
7
5
3
Current
Rating
Max (A)*
600 VAC
600 VAC or VDC
600 VAC or VDC
600 VAC or VDC
250 VAC
250 VAC or VDC
300 VAC
600 VAC
600 VAC
250 VAC
600 VAC or VDC
600 VAC or VDC
300 VAC (3.96 WTW,
6.5 WTB and
7.92 WTB)
50 VAC (3.96 WTB)
250 VAC or VDC
300 VAC
250 VAC
50 VAC or VDC
Voltage
Rating Max.
-55° to +105°
-55° to +105°
-55° to +105°**
-55° to +105°
-55° to +105°
-55° to +105°
-30° to +105°
-55° to +105°
-40° to +105°
-55° to +85°
-55° to +105°
-55° to +105°
-30° to +105°
-55° to +105°
-30° to +105°
-40° to +105°
-30° to +105°
Operating
Temp.
Range (C)
V-2
V-0
V-0 & V-2
V-2
V-2
V-2
V-0
V-2
V-0 & V-2
V-0
V-0 & V-2
V-0 & V-2
V-0
V-2
V-0
V-0
V-0
UL94
Flammability
Rating
No
No
Yes
No
No
No
No
No
No
No
No
Yes
No
No
No
No
No
Sealed
Version
Available
UL
UL, CSA, VDE
UL, CSA; designed and
tested to meet VDE 380 V
requirements, except
6 Position Circular
UL, CSA
UL, CSA
UL, CSA
UL, CSA
UL, CSA
UL, CSA
UL, CSA
UL, CSA, VDE
UL, CSA,
VDE (250 V Max.)
UL, CSA, VDE
UL, CSA
UL, CSA
UL, CSA, VDE
UL, CSA, VDE
Approvals
Introduction
*Current Rating is application dependent
** 125°C Available
.140 MATE-N-LOK
Commercial MATE-N-LOK
151
169
.093 Commercial Pin & Socket
143
165
5.0 mm Power Key Connectors (PKC)
135
Standard Density
VAL-U-LOK Connector System
119
Mini-Universal MATE-N-LOK
83
MR (Miniature Rectangular)
Power Double Lock (PDL)
59
Mini-Universal MATE-N-LOK 2
.062 Commercial Pin & Socket
53
99
Grace Inertia Connectors (GIC) 3.5
49
109
2.5 mm Signal Double Lock (SDL)
Micro MATE-N-LOK 3 mm
17
High Density
Product Name
9
Page
No.
AMP Soft Shell Pin and
Socket Connectors provide
a highly reliable and economic means of grouping
multiple-lead connections in
today’s computer, computer/
peripheral equipment,
business machines, entertainment centers, appliances
and other sophisticated
commercial equipment.
The electrical connector is an
integral component in these
applications. They also
offer worldwide application
approval because of their
reliability and economy.
Electrical functions have
increased in complexity
and new designs continually
call for the maximum use of
space. The Soft Shell Pin and
Socket family of connectors
offers the design and features
to answer these modern
industry requirements.
This catalog is organized by
contact centerline spacing
(High Density and Standard
Density) to provide you
with the basic information
necessary to select the
Soft Shell connector system
best suited for your specific
application. It contains general information to acquaint
you with the complete
family of connectors and
application tooling.
Since your specific
application will determine
the degree of automatic,
semiautomatic or manual
application tooling required,
complete specifications are
covered on pages 207-204.
Summary Chart
Soft Shell
Pin and Socket Connectors
AMP
Table of Contents
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
3
Soft Shell
Pin and Socket Connectors
AMP
Table of Contents (Continued)
High Density
Need more information?
Call Technical Support at a
local number listed on the
inside back cover.
Technical Support is staffed
with specialists well versed
in Tyco Electronics products.
2.5 mm Signal Double Lock (2.5 SDL) Connectors ......................9-16
Product Facts .............................................................................................................9
Performance Characteristics .......................................................................................9
Quick Reference Chart for Mating Part Numbers and Future Product Plans..............10
Mating Configurations (Wire-To-Wire and Wire-To-Board) ......................................11
Contacts and Double Lock Plates .............................................................................12
Plug Housings ..........................................................................................................13
Cap Housings ...........................................................................................................14
Headers, PC Board, Vertical: Standard-Profile .........................................................15
High-Profile................................................................16
Micro MATE-N-LOK 3 mm Connector System ...........................17-47
Product Facts............................................................................................................17
Performance Characteristics................................................................................17-18
Connector Application.........................................................................................19-21
Contacts ...................................................................................................................22
Receptacle Housings...........................................................................................23-24
Plug Housings ....................................................................................................25-28
Low Profile ...............................................................................................................29
Vertical Header Assemblies .................................................................................30-37
Right-Angle Header Assemblies..........................................................................38-47
Grace Inertia Connectors (GIC), 3.5 ......................................49-52
Product Facts ...........................................................................................................49
Performance Characteristics .....................................................................................49
Contacts and Double Lock Plates .............................................................................50
Housings: Plug and Cap .....................................................................................51-52
.062 [1.57] Commercial Pin and Socket Connectors ..................53-57
Product Facts............................................................................................................53
Performance Characteristics................................................................................53-54
Contacts ...................................................................................................................55
Housings: Free-Hanging or Panel Mount...........................................................56-57
Recommended Panel Cutouts.................................................................57
ISO900e1d
i
rtif
Ce
Produced under a Quality
Management System
certified to ISO 9001
ACTION PIN, AMP, AMP-DUAC,
AMP-O-LECTRIC, AMPOMATOR,
AMP-O-MATIC, CERTI-CRIMP,
FASTON, MATE-N-LOK,
PRO-CRIMPER, TE Logo and Tyco
Electronics and VAL-U-LOK
are trademarks.
Kapton is a trademark of E.I. du Pont de
Nemours and Company.
Power Double Lock (PDL) Connectors ....................................59-81
Product Facts ...........................................................................................................59
Performance Characteristics .....................................................................................59
Quick Reference Chart for Mating Part Numbers.......................................................60
Contacts ...................................................................................................................61
Housings: Free-Hanging Plug (3.96 mm centerline) ..........................................62-64
Free-Hanging Cap (3.96 mm centerline) ...........................................65-66
Panel Mount Cap (3.96 mm centerline).............................................67-70
Double Lock Plates (3.96 mm centerline) .................................................................71
Tab Headers, PC Board, Vertical: 3.96 mm centerline.........................................72-73
7.92 mm centerline ..............................................74
Housings: Free-Hanging Plug (6.5 mm centerline) ............................................75-76
Double Lock Plates (6.5 mm centerline) ...................................................................77
Housings: Panel Mount Cap (6.5 mm centerline) ....................................................78
Tab Headers, PC Board, Vertical: 6.5 and 13 mm centerlines .............................79-81
MOLEX Mini-Fit and Mini-Fit Jr. are
trademarks of Molex, Incorporated.
Other products, logos, and Company
names mentioned herein may be trademarks of their respective owners.
4
Catalog 82181
Revised 4-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
Soft Shell
Pin and Socket Connectors
AMP
Table of Contents (Continued)
Mini-Universal MATE-N-LOK Connectors ................................83-94
Product Facts............................................................................................................83
Performance Characteristics................................................................................83-84
Mating Combinations ...............................................................................................85
Contacts, Keying Plug, Wire Seal and Test Probe Contact .......................................86
Housings: Free-Hanging or Panel Mount...........................................................87-88
Hermaphroditic Free-Hanging ................................................................89
Headers, PC Board: Vertical Pin and Blindmate .................................................90-91
Right-Angle Pin .......................................................................92
Recommended PC Board Hole Layouts ...................................93
Plug or Cap Housing Strain Reliefs ..........................................................................94
High Density
(Continued)
Mini-Universal MATE-N-LOK Sealed Connectors .......................95-97
Product Facts............................................................................................................95
Performance Characteristics .....................................................................................95
Plug or Cap Housing................................................................................................96
Individual Wire Seals................................................................................................96
Gang Seals and Contacts..........................................................................................97
Mini-Universal MATE-N-LOK 2 Connectors.............................99-107
Product Facts............................................................................................................99
Performance Characteristics..............................................................................99-100
Contacts and Keying Plug ......................................................................................101
Housings: Free-Hanging .................................................................................101-102
Headers, PC Board: Vertical Pin and Blindmate .............................................103-104
Right-Angle Pin .....................................................................105
Recommended PC Board Hole Layouts .................................106
Mating Combinations .............................................................................................107
(MR) Miniature Rectangular Connectors..............................109-118
Product Facts..........................................................................................................109
Performance Characteristics............................................................................109-110
Mating Combinations .............................................................................................111
Contacts and Keying Plug ......................................................................................112
Housings: Free-Hanging or Panel Mount.......................................................113-114
Recommended Panel Cutouts...............................................................115
Strain Reliefs, Adapting Grommets and Commoning Bars ...................116
Headers, PC Board: Vertical Pin.....................................................................117-118
Recommended PC Board Hole Layouts..........................117-118
VAL-U-LOK Connector System ..........................................119-124
Product Facts .........................................................................................................119
Performance Characteristics ...................................................................................119
Contacts .................................................................................................................120
Housings (Single Row): Panel Mount Plug............................................................121
Free-Hanging Plug ..........................................................121
Receptacle .......................................................................121
Housings (Double Row): Panel Mount Plug ..........................................................122
Free-Hanging Plug .........................................................122
Colored ..........................................................................122
Receptacle ......................................................................122
Pin Headers, PC Board: Vertical and Right-Angle ..................................................123
Blind Mate Headers ................................................................................................124
AMP-DUAC Connectors...................................................125-133
Product Facts .........................................................................................................125
Performance Characteristics ...................................................................................125
Receptacle Housings and Female Contacts.............................................................126
Plug Housings and Male Contacts..........................................................................127
Headers, PC Board: Vertical ...........................................................................128-133
Right-Angle............................................................................133
Strain Relief, 6 Position (for Receptacle or Plug Housing)......................................127
5
Catalog 82181
Revised 4-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
Soft Shell
Pin and Socket Connectors
AMP
Table of Contents (Continued)
Standard Density
5.0 mm Power Key Connectors (5.0 PKC).............................135-141
Product Facts .........................................................................................................135
Performance Characteristics ...................................................................................135
Quick Reference Chart for Mating Part Numbers.....................................................136
Contacts and Double Lock Plates ...........................................................................137
Plug Housings: 1 Row ...........................................................................................138
2 Row ...........................................................................................139
Headers, PC Board, Vertical: 1 Row .......................................................................140
2 Row .......................................................................141
.093 [2.36] Commercial Pin and Socket Connectors ...............143-149
Product Facts..........................................................................................................143
Performance Characteristics............................................................................143-144
Contacts .................................................................................................................145
Housings: Free-Hanging or Panel Mount.......................................................146-149
Commercial MATE-N-LOK Connectors.................................151-164
Product Facts..........................................................................................................151
Performance Characteristics............................................................................151-152
Mating Combinations......................................................................................153-154
Contacts, Commoning Tabs and Keying Plug .................................................155-156
Housings: Free-Hanging........................................................................................157
Positive Lock ........................................................................................158
Panel Mount .........................................................................................159
Flange Mount and Motor Mount...........................................................160
Headers, PC Board: Vertical Pin ............................................................................161
Surface Mount Right-Angle Pin and Vertical Socket..............162
Right-Angle Pin .....................................................................163
Insulation Displacement Connectors (IDC) and Dust Covers .................................163
Right-Angle Pin Headers with Fix Belt....................................................................164
.140 MATE-N-LOK Connectors ..........................................165-167
Product Facts..........................................................................................................165
Performance Characteristics ...................................................................................165
Contacts .................................................................................................................166
Housings: Free-Hanging........................................................................................166
Panel Mount .........................................................................................167
6
Catalog 82181
Revised 4-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
Soft Shell
Pin and Socket Connectors
AMP
Table of Contents (Continued)
Standard Density
Universal MATE-N-LOK Connectors ....................................169-185
Product Facts..........................................................................................................169
Performance Characteristics............................................................................169-170
Mating Combinations .............................................................................................171
Contacts ..........................................................................................................172-173
Housings: Free-Hanging or Panel Mount ..............................................................174
Cap Housing Panel Cutouts, Keying Plugs and
Plug Housing Strain Reliefs..............................................................175
Plug or Cap Housing Strain Reliefs and Cap Housing Adapters...........176
Flanged Cap Housings with Twist and Lock Feature.............................177
Sealed Bulkhead Connectors...........................................................................178-179
Splash-Proof Seals.................................................................................................180
Contacts (used with Splash-Proof Seals) ...............................................................181
Headers, PC Board: Vertical Pin ............................................................................182
Vertical Socket .......................................................................183
Recommended PC Board Hole Layouts .................................184
PC Board Vertical Pin Headers with ACTION PIN Contacts ......184
Right-Angle Pin and Socket...................................................185
Test Connectors ......................................................................................................185
Circular Connectors ........................................................................................186-188
Universal MATE-N-LOK Connectors — Available in Colors ..................................188
(Continued)
Universal MATE-N-LOK II Connectors .................................189-202
Product Facts..........................................................................................................189
Performance Characteristics............................................................................189-190
Mating Combinations .............................................................................................191
Contacts .................................................................................................................192
Housing Kits: Free-Hanging or Panel Mount .................................................193-194
Housing Components: Free-Hanging or Panel Mount ....................195
Plug or Cap Housing Strain Reliefs and Keying Plug......................196
Headers, PC Board: Vertical Pin ............................................................................197
Vertical Socket .......................................................................198
Recommended PC Board Hole Layouts .................................199
PC Board Vertical Pin Headers with ACTION PIN Contacts ......199
Right-Angle Pin and Socket...................................................200
High Current Contacts ............................................................................................201
High Current Vertical Pin Headers..........................................................................202
.156 MATE-N-LOK Connectors ..........................................203-204
Product Facts..........................................................................................................203
Contacts ................................................................................................................203
Housings: Free-Hanging........................................................................................204
Panel Mount .........................................................................................204
Technical Documents ......................................................................................205-206
Application Tooling .........................................................................................207-210
Applicator Options ..........................................................................................211-213
Product Feature Comparisons.........................................................................214-215
Non-Compliant to RoHS Compliant Part Number Cross Reference ................216-220
Part Number Index ..........................................................................................221-226
Tooling Part Number Index .....................................................................................227
Global Contacts ......................................................................................................229
7
Catalog 82181
Revised 4-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
Soft Shell
Pin and Socket Connectors
AMP
Engineering Notes
8
Catalog 82181
Revised 4-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
Soft Shell
Pin and Socket Connectors
AMP
High Density
2.5 mm Signal Double Lock (2.5 SDL) Connectors
(Wire-to-Board and Wire-to-Wire)
Product Facts
Connector for signal circuits
with one row of contacts on
2.5 mm centerline
■ Wire-to-board and wire-towire connectors, consisting
of plug and cap housings for
wire termination and PC
board-mount post headers
■ Mounted to plug and cap
housings for wire
application, double lock
plate provides for positive
loading of contacts in the
housing. It also helps
contacts mate completely
■ Double lock plate is
contained within the plug
and cap housing completely,
which provides neat overall
appearance
■ Accepts 26-20 AWG wire
(e.g. UL 1007, 1061, 1571,
etc.) with insulation
diameters of up to 1.8 mm
■ PC board-mount post header
is available in two styles:
standard profile and high
profile
■ High-profile post header has
locking feature at location
fit to resin coating, which is
applied onto the board for
waterproof protection as in
home appliances. It does not
hamper mating and locking
of post header with plug
housing
■ Locking structure is innerlock type and has a clean
surface
■ Solder tail section of post
header is provided with kinks
to retain the header firmly on
PC board during soldering
■ Radial tape-mounted version
of post header is also
available that is applicable
to radial mounting machines
■ Recognized under the
Component Program
of Underwriters Laboratories
Inc., File No. E28476
■ Certified by Canadian
Standards Association,
File No. LR7189
■ VDE Approved, File No.
B 04 11 39175013
■
2.5 mm Signal Double Lock
.098 [2.50] Centerline
R
2.5 mm Signal Double Lock
Connectors (2.5 SDL) are
2.5 mm centerline, compact, one-row connectors
for signal circuits.
With contacts on 2.5 mm
centerline, both wire-to-wire
and wire-to-board connectors are available.
The connectors consist of
plug and cap housings for
wire termination, double
lock plates for plug and cap
housings, crimp snap-in
contacts, and a PC boardmount post header. A double lock plate is available
for both plug and wire-towire cap housing to provide
for positive loading. It helps
prevent contacts from coming off or mating halfway.
The plate is contained within
the plug and cap housing
completely. The plug and
cap housing can be used
without a double lock plate.
R
The connector accepts 2620 AWG wire (e.g. UL 1007,
1061, 1571, etc.) with insu-
lation diameters of up to
1.8 mm.
The PC board-mount post
header is available in two
styles: standard profile and
high profile.
The high-profile type connectors can be used for
home appliances, which
require waterproof protection. It does not hamper
mating and locking of the
post header with the plug
housing, even if the board
has resin coating on it.
The locking structure is
inner-lock type and has a
clean surface.
The solder tail of the loosepiece post header has kinks
to secure the connector
on the PC board until it is
soldered.
Radial tape-mounted version of post header is also
available and this is applicable to radial mounting
machines.
Performance Characteristics
Voltage Rating—50 VAC/DC
Current Rating—3 A
Overall Resistance—
10 mΩ max. (initial)
20 mΩ max. (final)
Insulation Resistance—
500 Ω (500 VDC)
Dielectric Withstanding Voltage—
1,100 VAC, one minute
Contact Resistance—20 mΩ max.
Operating Temperature—
-30°~ + 105˚C
(The upper limit includes temperature
rise from power carrying)
Applicable Wire—26-20 AWG (UL
1007, 1061, 1571)
Wire Insulation Range—
0.93~ 1.8 mm
PC Board Thickness—1.6 mm
Technical Documents
Product Specification
108-5459
Application Specification
114-5203
Note: Dimensions shown are metric.
9
Catalog 82181
Revised 4-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
High Density
Soft Shell
Pin and Socket Connectors
AMP
2.5 mm Signal Double Lock (2.5 SDL) Connectors
(Wire-to-Board and Wire-to-Wire) (Continued)
Quick Reference Chart for Mating Part Numbers
2.5 mm Signal Double Lock
.098 [2.50] Centerline
2
3
4
5
6
7
8
9
10
11
12
13
Mating Connectors (PC Board Mount & Wire Side)
Plug Connector Part No.
(Wire Side)
No. of Pos.
Housing
Double Lock Plate
917686-1
917687-1
917688-1
917689-1
917690-1
917691-1
917692-1
917693-1
917694-1
917695-1
917696-1
917697-1
917698-1
917699-1
917700-1
917701-1
917702-1
917703-1
917704-1
917705-1
917706-1
917707-1
917708-1
917709-1
Post Header Part No.
Standard-Profile Type*
917780-1
917781-1
917782-1
917783-1
917784-1
917785-1
917786-1
917787-1
917788-1
917789-1
917790-1
917791-1
Cap Connector Part No.
High-Profile Type
917722-1
917723-1
917724-1
917725-1
917726-1
917727-1
917728-1
917729-1
917730-1
917731-1
917732-1
917733-1
Cap Housing
316086-1
316087-1
316088-1
316089-1
316090-1
316091-1
316092-1
——
316094-1
——
——
——
Double Lock Plate
917698-1
917699-1
917700-1
917701-1
917702-1
917703-1
917704-1
917705-1
917706-1
917707-1
917708-1
917709-1
*Included in Standard-Profile Post Header line are Radial Tape-Mounted version (2 to 8 positions).
Refer to appropriate description in the catalog.
Note: All part numbers are RoHS Compliant.
Product Family List (Including Production Plans)
Number of Positions
Description
2
3
4
5
6
7
8
9
10
11
12
13
Loose Piece
Radial Tape-Mounted
Ҁ
Ҁ
Ҁ
Ҁ
Ҁ
Loose Piece
Radial Tape-Mounted
Ҁ
Ҁ
Ҁ
Ҁ
Ҁ
Cap Housing
Double Lock Plate
Horizontal Board Mount Post Header
Horizontal Mount Post Header (Radial Tape-Mounted)
Ҁ
Ҁ
Ҁ
Ҁ
Ҁ
Plug Housing
Standard-Profile Type
Vertical Board Mount
Post Header
High-Profile Type
Note: indicates products currently available; indicates products planned for production.
Note: Dimensions shown are metric.
10
Catalog 82181
Revised 4-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
Soft Shell
Pin and Socket Connectors
AMP
High Density
2.5 mm Signal Double Lock (2.5 SDL) Connectors
(Wire-to-Board and Wire-to-Wire) (Continued)
Mating Configurations
Wire-to-Wire Connections
2.5 mm Signal Double Lock
.098 [2.50] Centerline
Wire-to-PC Board Connections
Standard-Profile Type
High-Profile Type
Note: Dimensions shown are metric.
11
Catalog 82181
Revised 4-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
High Density
Soft Shell
Pin and Socket Connectors
AMP
2.5 mm Signal Double Lock (2.5 SDL) Connectors
(Wire-to-Board and Wire-to-Wire) (Continued)
Contacts
Material and Finish
2.5 mm Signal Double Lock
.098 [2.50] Centerline
Pre-tinned phosphor bronze
(0.2 mm thick)
Receptacle for Plug Housing,
Tab for Cap Housing
Tab
Receptacle
Contact Part Number
Wire Range
AWG
mm2
26-22
22-20
0.12~0.35
0.30~0.53
Wire Ins.
Dia.
0.93~1.50
1.40~1.80
Tab
Strip Form
917765-1
917764-1
Applicator
Part Number
Receptacle
Loose Piece
316399-1
316398-1
Strip Form
917684-1
917683-1
Loose Piece
316401-1
316400-1
*
*
Hand Tool Part No.: for 26-22 AWG = 234604-1 (Instruction Sheet 411-5736)
22-20 AWG = 234603-1 (Instruction Sheet 411-5735)
Extraction Tool Part No.: 234605-1 (Instruction Sheet 411-5737)
* Contact the Tooling Assistance Center (TAC) at 1-800-722-1111 for Applicator Part Number.
2 Pos.
3 to 13 Pos.
Double Lock Plates
Material
UL94V-0, 6/6 Nylon, glass filled,
natural color
No. of Pos.
2
3
4
5
6
7
8
9
10
11
12
13
Dimensions of Double Lock Plate
A
06.5
09.0
11.5
14.0
16.5
19.0
21.5
24.0
26.5
29.0
31.5
34.0
B
04.3
06.8
09.3
11.8
14.3
16.8
19.3
21.8
24.3
26.8
29.3
31.8
Double Lock Plate
Part Number
917698-1
917699-1
917700-1
917701-1
917702-1
917703-1
917704-1
917705-1
917706-1
917707-1
917708-1
917709-1
Applicable Housing Part Number
Plug
917686-1
917687-1
917688-1
917689-1
917690-1
917691-1
917692-1
917693-1
917694-1
917695-1
917696-1
917697-1
Cap
316086-1
316087-1
316088-1
316089-1
316090-1
316091-1
316092-1
——
316094-1
——
——
——
Extraction Tool Part No. for Double Lock Plate: 234605-1 (Instruction Sheet 411-5737)
Note: All part numbers are RoHS Compliant.
Note: Dimensions shown are metric.
12
Catalog 82181
Revised 4-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
Soft Shell
Pin and Socket Connectors
AMP
High Density
2.5 mm Signal Double Lock (2.5 SDL) Connectors
(Wire-to-Board and Wire-to-Wire) (Continued)
Plug Housings
(For Receptacle Contacts)
2 to 13 Positions
2.5 mm Signal Double Lock
.098 [2.50] Centerline
Material
UL94V-0, 6/6 Nylon, color (see chart)
Related Product Data
Receptacle Contact Part No.
917684-1 (26-22 AWG)
917683-1 (22-20 AWG)
Double Lock Plate—page 12
Mating Cap Housings—page 14
Mating Post Headers—pages 15-16
No. of Pos.
2
3
4
5
6
7
8
9
10
11
12
13
Dimensions
Plug Housing Part Number
A
B
C
02.5
05.0
07.5
10.0
12.5
15.0
17.5
20.0
22.5
25.0
27.5
30.0
07.5
10.0
12.5
15.0
17.5
20.0
22.5
25.0
27.5
30.0
32.5
35.0
06.1
08.6
11.1
13.6
16.1
18.6
21.1
23.6
26.1
28.6
31.1
33.6
Natural
917686-1
917687-1
917688-1
917689-1
917690-1
917691-1
917692-1
917693-1
917694-1
917695-1
917696-1
917697-1
Red
917686-2
917687-2
917688-2
917689-2
917690-2
917691-2
——
917693-2
——
——
917696-2
917697-2
Yellow
917686-4
917687-4
917688-4
——
917690-4
917691-4
——
917693-4
917694-4
——
——
——
Green
917686-5
——
——
——
——
——
——
——
——
——
——
——
Blue
917686-6
917687-6
——
917689-6
917690-6
——
917692-6
——
——
——
——
——
Black
917686-9
917687-9
917688-9
——
917690-9
917691-9
——
——
——
——
——
——
Note: All part numbers are RoHS Compliant.
13
Catalog 82181
Revised 4-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
High Density
Soft Shell
Pin and Socket Connectors
AMP
2.5 mm Signal Double Lock (2.5 SDL) Connectors
(Wire-to-Wire)
Cap Housings
(For Tab Contacts)
2.5 mm Signal Double Lock
.098 [2.50] Centerline
2 to 10 Positions
Material
UL94V-0, 6/6 Nylon, color (see chart)
Related Product Data
Tab Contact Part No.
917765-1 (26-22 AWG)
917764-1 (22-20 AWG)
Double Lock Plate—page 12
Mating Plug Housings—
page 13
Section X-X
Section X-X
No. of Pos.
2
3
4
5
6
7
8
10
Cap Housing Part Number
Dimensions
A
02.5
05.0
07.5
10.0
12.5
15.0
17.5
22.5
B
08.1
10.6
13.1
15.6
18.1
20.6
23.1
28.1
Natural
316086-1
316087-1
316088-1
316089-1
316090-1
316091-1
316092-1
316094-1
Red
316086-2
——
316088-2
316089-2
——
——
——
——
Yellow
316086-4
316087-4
306088-4
——
——
——
——
316094-4
Blue
316086-6
——
——
——
——
——
——
——
Black
316086-9
316087-9
316088-9
——
——
316091-9
——
——
Note: All part numbers are RoHS Compliant.
Note: Dimensions shown are metric.
14
Catalog 82181
Revised 4-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
Soft Shell
Pin and Socket Connectors
AMP
High Density
2.5 mm Signal Double Lock (2.5 SDL) Connectors
(Wire-to-Wire) (Continued)
Vertical Post Headers
(For PC Board Mount)
Standard-Profile Type
2.5 mm Signal Double Lock
.098 [2.50] Centerline
2 Pos.
Material and Finish
Header Housings
UL94V-0, 6/6 Nylon, glass filled,
color (see chart)
Post Contact
Pre-tinned copper alloy
3 to 13 Pos.
Designs of 5 pos. to 8 pos.
header housings are slightly
different, please request the
drawings.
Related Product Data
Mating Plug Housings—
page 13
Section X-X
Section X-X
No.
of
Pos.
2
3
4
5
6
7
8
9
10
11
12
13
Post Header Part Number
Dimensions
A
02.5
05.0
07.5
10.0
12.5
15.0
17.5
20.0
22.5
25.0
27.5
30.0
B
07.5
10.0
12.5
15.0
17.5
20.0
22.5
25.0
27.5
30.0
32.5
35.0
Loose Piece
Natural
-917780-1*1
-917781-1*1
-917782-1*1
-917783-1*1
-917784-1*1
-917785-1*1
-917786-1*1
-917787-1*1
-917788-1*1
-917789-1*1
-917790-1*1
-917791-1*1
Red
-917780-2*1
-917781-2*1
-917782-2*1
-917783-2*1
-917784-2*1
-917785-2
——
-917787-2
——
——
-917790-2
-917791-2
Radial Tape-Mounted
Yellow
Blue
Black
——
——
-917780-9*1
——
——
-917781-9*1
-917782-4*1
——
-917782-9*1
——
-917783-6
——
——
——
-917784-9*1
-917785-4*1
——
——
——
-917786-6*
——
——
——
——
——
——
——
——
——
——
——
——
——
——
——
——
*1 Leave the blank, meaning it is with the boss.
Enter 2 meaning it is without the boss.
*2 Leave the blank, meaning it is with the boss and the kink.
Enter 1 meaning it is without the boss and the kink.
Enter 2 meaning it is with the boss and with the kink.
Note: All part numbers are RoHS Compliant.
*3
*4
*5
*6
Natural
Red
-917894-1*3
——
-917895-1*4 -917895-2
-917896-1
——
-917897-1
-917897-2
-917898-1
——
-917899-1*5 3-917899-2*6
-917900-1
——
——
——
——
——
——
——
——
——
——
——
Yellow
——
——
——
——
——
-917899-4
——
——
——
——
——
——
(Qty.)
(900)
(900)
(450)
(450)
(450)
(450)
(450)
The blue housing 917894-6 is also available.
The blue housing 917895-6 and the black housing 917895-9 are also available.
Leave the blank, meaning it is without the boss. Enter 3 meaning it is with the boss.
It is without the boss.
Note: Dimensions shown are metric.
15
Catalog 82181
Revised 4-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
High Density
Soft Shell
Pin and Socket Connectors
AMP
2.5 mm Signal Double Lock (2.5 SDL) Connectors
(Wire-to-Wire) (Continued)
Vertical Post Headers
(For PC Board Mount)
High-Profile Type
Related Product Data
Mating Plug Housings—page 13
2.5 mm Signal Double Lock
.098 [2.50] Centerline
Material and Finish
3 to 13 Pos.
Header Housing—UL94V-0, 6/6
Nylon, glass filled, color (see chart)
Post Contact—Pre-tinned copper
alloy
Designs of 5 pos. to 8 pos. header
housings are slightly different, please
request the drawings.
2 Pos.
Section X-X
Section X-X
Note: Dimensions shown are metric.
No.
of
Pos.
2
3
4
5
6
7
8
9
10
11
12
13
Post Header Part Number
Dimensions
Radial TapeMounted
Loose Piece
A
B
Natural
Red
02.5
05.0
07.5
10.0
12.5
15.0
17.5
20.0
22.5
25.0
27.5
30.0
07.5
10.0
12.5
15.0
17.5
20.0
22.5
25.0
27.5
30.0
32.5
35.0
-917722-1*1
-917723-1*1
-917724-1*1
-917725-1*1
-917726-1*1
-917727-1*1
-917728-1*1
-917729-1*1
-917730-1*1
-917731-1*1
-917732-1*1
-917733-1*1
-917722-2*1
——
——
——
——
——
——
——
——
——
——
——
Yellow
Green
-917722-4*1 -917722-5*1
——
——
——
——
——
——
-917726-4*1
——
——
——
——
——
——
——
——
——
——
——
——
——
——
——
Blue
Black
-917722-6*1
——
——
——
-917726-6*1
——
——
——
——
——
——
——
-917722-9*1
——
——
——
——
——
——
——
——
——
——
——
Natural
316221-1
316222-1
316223-1
316224-1
316225-1
316226-1
316227-1
——
——
——
——
——
(Qty.)
(900)*2
(900)
(450)
(450)
(450)
(450)
(450)
*1 Leave the blank, meaning it is with the boss. Enter 2 meaning it is without the boss.
*2 The red housing 316221-2 and the yellow housing 316221-4 and the green housing 316221-5 and the blue housing 316221-6 and the black housing
316221-9 are also available.
16
Note: All part numbers are RoHS Compliant.
Catalog 82181
Revised 4-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
Soft Shell
Pin and Socket Connectors
AMP
Micro MATE-N-LOK 3 mm Connector System
High Density
Product Facts
Wire-to-wire and wire-toboard pin and receptacle
connector system
■ Contacts are on 3 mm [.118]
centerline spacing
■ 2-12 contact positions –
single row
■ 2-24 contact positions –
dual row
■ Panel mount or free-hanging
wire-to-wire configurations
■ Dual beam contact design
for reliable interconnection
■ Contacts accept 24-20
[0.2-0.6] and 30-26
[0.05-0.15] AWG wire with
insulation diameter of .060
[1.52] maximum
■ Contacts available in strip
form or loose piece
■ Pcb mount pin header
assemblies in both vertical
and right-angle styles
■ Surface mount or throughhole pcb pin header
attachment
■ Pcb headers are IR reflow
process compatible
■ Recognized under the
Component Program
®
of Underwriters
US
Laboratories Inc. C
to US and Canadian
Standards, File No. E28476
■ Passed Tests for VDE under
Registration Number
40005280/Continuous
Surveillance
■
Micro MATE-N-LOK 3 mm Connector System
.118 [3.00] Centerline
The Micro MATE-N-LOK
3 mm Connector System is
a wire-to-wire and wire-toboard connector system
with contacts on a 3 mm
[.118] centerline. Both single-row and dual-row configurations are available.
Crimp, snap-in pin and
receptacle contacts are
used to terminate 24-20
[0.2-0.6] and 30-26 [0.050.15] AWG wire. Plug and
receptacle housings allow
wire-to-wire and wire-topanel configurations.
Header assemblies for wireto-board interconnections
include vertical and rightangle components. These
IR reflow process compatible headers are available in
through-hole and surface
mount configurations.
Technical Documents
Application Specification
114-13000 Micro MATE-N-LOK
Connectors
Product Specification
108-1836 3 mm Micro MATE-N-LOK
Connector
Typical uses of the Micro
MATE-N-LOK 3 mm
Connector System include
the appliance, instrumentation, industrial machinery,
home equipment, and
security system industries.
Performance Characteristics
Voltage Rating—250 vac
Current Rating—5 amp max. on
20 AWG wire
Contact Resistance—20 milliohms
max. final
Dielectric Withstanding Voltage—
1500 VAC
Insulation Resistance—1000
megohms min.
Operating Temperature— -40°C to
+105°C
Mating Force—1.5lb [6.67N] max per
contact
17
Catalog 82181
Revised 4-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
Soft Shell
Pin and Socket Connectors
AMP
High Density
Micro MATE-N-LOK 3 mm Connector System (Continued)
Connector Application . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19-21
Crimp, Snap-In Contacts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Receptacle Housings
Single Row . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Dual Row . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Micro MATE-N-LOK 3 mm Connector System
.118 [3.00] Centerline
Plug Housings
Single Row, Free-Hanging . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Single Row, Panel Mount . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Dual Row, Free-Hanging . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Dual Row, Panel Mount . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
Vertical Header Assemblies
Low Profile Receptacle Housings,
Right Angle Surface Mount Housings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
Single Row, Through-Hole, with Retention Feature
on Soldertail and Polarization Feature to PCB . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
Single Row, Through-Hole, with Metal Through-Hole Hold-down . . . . . . . . . . . . . . . . . . . 31
Single Row, Surface Mount, with Metal Through-Hole Hold-down . . . . . . . . . . . . . . . . . . 32
Single Row, Surface Mount, with Surface Mount Hold-down . . . . . . . . . . . . . . . . . . . . . . 33
Dual Row, Through-Hole, with Retention Feature on Soldertail . . . . . . . . . . . . . . . . . . . . . 34
Dual Row, Through-Hole, with Retention Feature
on Soldertail and Metal Through-Hole Hold-down . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
Dual Row, Surface Mount, with Metal Through-Hole Hold-down. . . . . . . . . . . . . . . . . . . . 36
Dual Row, Surface Mount, with Surface Mount Hold-down . . . . . . . . . . . . . . . . . . . . . . . . 37
Right-Angle Header Assemblies
Single Row, Through-Hole, with Metal Through-Hole Hold-down . . . . . . . . . . . . . . . . . . . 38
Single Row, Through-Hole, with Plastic Boardlock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
Single Row, Surface Mount, with Metal Through-Hole Hold-down . . . . . . . . . . . . . . . . . . 40
Single Row, Surface Mount, with Surface Mount Hold-down . . . . . . . . . . . . . . . . . . . . . . 41
Single Row, Surface Mount, with Plastic Boardlock. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
Dual Row, Through-Hole, with Metal Through-Hole Hold-down . . . . . . . . . . . . . . . . . . . . 43
Dual Row, Through-Hole, with Plastic Boardlock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
Dual Row, Surface Mount, with Metal Through-Hole Hold-down. . . . . . . . . . . . . . . . . . . . 45
Dual Row, Surface Mount, with Plastic Boardlock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46
Dual Row, Surface Mount, with Surface Mount Hold-down . . . . . . . . . . . . . . . . . . . . . . . . 47
Current Rating Verification for 30˚C Maximum Temperature Rise 100% Energized
7
6
5
Number of
Circuit Positions
4
2 to 6
8 to 20
22 to 24
3
2
Multiplication Factor
Wire Size (AWG)
28
20
0.40
1
0.40
0.85
0.36
0.85
1
0
0
10
20
40
60
70
30
50
80
Ambient Temperature - Centigrade
90
100
110
Maximum Operating Temperature
To determine acceptable current carrying capacity for connector size and wire gage indicated, use the Multiplication
Factor from the chart above and multiply it times the Base rated Current at the maximum ambient operating temperature shown in the current rating figure.
18
Catalog 82181
Revised 4-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
Soft Shell
Pin and Socket Connectors
AMP
Micro MATE-N-LOK 3 mm Connector System (Continued)
Receptacle
Contact
High Density
Connector Application —
Wire-to-Wire and
Wire-to-Panel
Plug
Housing
Contact
Housing
Single Row
Micro MATE-N-LOK 3 mm Connector System
.118 [3.00] Centerline
Free-Hanging
■
■ -1445049-■
Page 25
■-794606-■
■, ■-794607-■
■,
■, ■-794611-■
■
■-794610-■
Page 22
■ -1445022-■
■
Page 23
■-794608-■
■, ■-794609-■
■,
■, ■-794613-■
■
■-794612-■
Page 22
Panel Mount
■ -1445048-■
■
Page 26
Dual Row
Receptacle
Contact
Plug
Housing
Contact
Housing
Free-Hanging
■ -794616-■
■
Page 27
■-794606-■
■, ■-794607-■
■,
■, ■-794611-■
■
■-794610-■
Page 22
■ -794617-■
■
Page 24
■-794608-■
■, ■-794609-■
■,
■, ■-794613-■
■
■-794612-■
Page 22
Panel Mount
■ -794615-■
■
Page 28
19
Catalog 82181
Revised 4-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
Soft Shell
Pin and Socket Connectors
AMP
High Density
Micro MATE-N-LOK 3 mm Connector System (Continued)
Connector Application —
Wire-to-PCB
Header
Receptacle
Contact
Housing
Single Row
Micro MATE-N-LOK 3 mm Connector System
.118 [3.00] Centerline
Vertical Through-Hole, with Retention Feature on
Soldertail and Polarization Feature to PCB
■-1445050-■
■, ■-1445084-■
■, ■ -1445093-■
■ (Page 30)
Vertical Through-Hole, with Metal Through-Hole Hold-down
■-1445051-■
■, ■-1445085-■
■, ■-1445094-■
■ (Page 31)
■, ■-794607-■
■,
■-794606-■
■, ■-794611-■
■
■-794610-■
(Page 22)
■ -1445022-■
■
(Page 23)
Vertical Surface Mount, with Metal Through-Hole Hold-down
■-1445052-■
■, ■-1445086-■
■, ■-1445095-■
■ (Page 32)
Vertical Surface Mount, with Surface Mount Hold-down
■-1445053-■
■, ■-1445087-■
■, ■-1445096-■
■ (Page 33)
Right-angle, Through-Hole, with Metal Through-Hole Hold-down
■-1445054-■
■, ■-1445088-■
■, ■-1445097-■
■ (Page 38)
Right-angle, Through-Hole, with Plastic Boardlock
■-1445055-■
■, ■-1445089-■
■, ■-1445098-■
■ (Page 39)
Low Profile, Single Row
Right-angle, Surface Mount, with Metal Through-Hole Hold-down
■-1445056-■
■, ■-1445090-■
■, ■-1445099-■
■ (Page 40)
■, ■-794607-■
■, ■-2029047-■
■, ■-2029102-■
■,
■-794606-■
■, ■-794611-■
■ ■-2029030-■
■, ■-2029104-■
■,
■-794610-■
(Page 29)
(Page 29)
Right-angle, Surface Mount, with Surface Mount Hold-down
■-1445057-■
■, ■-1445091-■
■, ■-1445100-■
■ (Page 41)
Right-angle, Surface Mount, and Plastic Boardlock
■-1445058-■
■, ■-1445092-■
■, ■-1445101-■
■ (Page 42)
Low Profile, Single Row
■-2029030-■
■, ■-2029102-■
■ (Page 29)
20
Catalog 82181
Revised 4-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
Soft Shell
Pin and Socket Connectors
AMP
Micro MATE-N-LOK 3 mm Connector System (Continued)
Receptacle
Contact
High Density
Connector Application —
Wire-to-PCB
Header
Housing
Dual Row
Micro MATE-N-LOK 3 mm Connector System
.118 [3.00] Centerline
Vertical Through-Hole, with Retention Feature on
Soldertail and Optional Metal Through-Hole Hold-down
■ -794630-■
■ , ■ -794631-■
■, ■ -794632-■
■ , (Page 34)
■ -794680-■
■ , ■ -794681-■
■, ■ -794682-■
■ (Page 35)
Vertical Surface Mount, with Metal Through-Hole
Hold-down
■ -794633-■
■ , ■ -794634-■
■, ■ -794635-■
■ (Page 36)
Vertical Surface Mount, with Surface Mount Hold-down
■ -794636-■
■ , ■-794637-■
■, ■ -794638-■
■ (Page 37)
■-794606-■
■, ■-794607-■
■,
■-794610-■
■, ■-794611-■
■
(Page 22}
■-794617-■
■
(Page 24)
Right-angle, Through-Hole, with Metal Through-Hole
Hold-down
■ -794677-■
■ , ■-794678-■
■, ■ -794679-■
■ (Page 43)
Right-angle, Through-Hole, with Plastic Boardlock
■ -794618-■
■ , ■-794619-■
■, ■ -794620-■
■ (Page 44)
Right-angle, Surface Mount, with Metal Through-Hole
Hold-down
■ -794624-■
■ , ■-794625-■
■, ■ -794626-■
■ (Page 45)
Right-angle, Surface Mount, with Plastic Boardlock
■ -794621-■
■ , ■-794622-■
■, ■ -794623-■
■ (Page 46)
Right-angle, Surface Mount, with Surface Mount
Hold-down
■ -794627-■
■ , ■-794628-■
■, ■ -794629-■
■ (Page 47)
21
Catalog 82181
Revised 4-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
Soft Shell
Pin and Socket Connectors
AMP
High Density
Micro MATE-N-LOK 3 mm Connector System (Continued)
Crimp, Snap-In Contacts
Material and Finish
Micro MATE-N-LOK 3 mm Connector System
.118 [3.00] Centerline
Receptacle — Phosphor Bronze
Plug — Brass
Plating A — .000100 (.000254)
minimum bright tin entire stock over
.000050 (.000127) minimum nickel
entire stock
Plating B — .000015 (.000038)
minimum gold in localized gold plate
area. .000100 (.000254) minimum
bright tin in localized tin plate area, both
over .000050 (.000127) minimum nickel
on entire stock
Plating C — .000030 (.000076)
minimum gold in localized gold plate
area. .000100 (.000254) minimum
bright tin in localized tin plate area, both
over .000050 (.000127) minimum nickel
on entire stock
Related Product Data
Connectors used with:
Receptacle Contacts used with
Receptacle Housings — pages 23-24
Plug Contacts used with Plug
Housings — pages 25-28
Application Tooling—
pages 207-210
.489
[12.17] Ref.
Receptacle Contacts
Wire Size
Range
AWG [mm2]
Ins. Dia.
Range
20-24
0.50 - 0.20
.035 - .060
0.89-1.52
26-30
0.12 - 0.05
.035 - .060
0.89-1.52
Finish
Plating A
Plating B
Plating C
Plating A
Plating B
Plating C
Contact Part Numbers
Strip
Loose
Form
Piece
794606-1
794610-1
1-794606-1
1-794610-1
1-794606-2
1-794610-2
794607-1
794611-1
1-794607-1
1-794611-1
1-794607-2
1-794611-2
Tooling Part Numbers
Applicator
Hand Tool
■*
680893-■
91501-1
■*
680894-■
91502-1
*1=AMPOMATOR CLS Machine, 2=AMP-O-LECTRIC Model K Terminator, 3=AMP-O-LECTRIC Model G Terminator
Note: All part numbers are RoHS Compliant.
.541
[13.73] Ref.
Plug Contacts
Wire Size
Range
AWG [mm2]
Ins. Dia.
Range
20-24
0.50 - 0.20
.035 - .060
0.89-1.52
26-30
0.12 -0.05
.035 - .060
0.89-1.52
Contact Extraction Tools
Part Number 843996-6 for Receptacle
Contacts Part Number 1586344-1 for
Plug Contacts
Finish
Plating A
Plating B
Plating C
Plating A
Plating B
Plating C
Contact Part Numbers
Strip
Loose
Form
Piece
1-794608-0
1-794612-0
1-794608-1
1-794612-1
1-794608-2
1-794612-2
1-794609-0
1-794613-0
1-794609-1
1-794613-1
1-794609-2
1-794613-2
Tooling Part Numbers
Applicator
Hand Tool
■*
1385194-■
91501-1
■*
1385377-■
91502-1
*1=AMPOMATOR CLS Machine, 2=AMP-O-LECTRIC Model K Terminator, 3=AMP-O-LECTRIC Model G Terminator
Note: All part numbers are RoHS Compliant.
22
Catalog 82181
Revised 4-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
Soft Shell
Pin and Socket Connectors
AMP
Micro MATE-N-LOK 3 mm Connector System (Continued)
High Density
Receptacle Housings
Single Row
Material
Related Product Data
Contacts:
Micro MATE-N-LOK 3 mm Connector System
.118 [3.00] Centerline
Nylon, Black
Flammability Rating—UL 94V-0
.553
[14.04]
Receptacle Contacts—page 22
Mateable Housings and
Headers:
.118
[3.00] Typ.
Single Row Plug Housings—
pages 25-26
Single Row Vertical Pin Header
Assemblies—pages 30-37
Single Row Right-Angle Pin Header
Assemblies—pages 38-47
.342
[8.70]
.152
[3.86]
.251
[6.37]
A
Number
of Circuits
2
3
4
5
6
7
8
9
10
11
12
Dimension
A
.276
7.00
.394
10.00
.512
13.00
.630
16.00
.748
19.00
.866
22.00
.984
25.00
1.102
28.00
1.220
31.00
1.339
34.00
1.457
37.00
Part
Numbers
1445022-2
1445022-3
1445022-4
1445022-5
1445022-6
1445022-7
1445022-8
1445022-9
1-1445022-0
1-1445022-1
1-1445022-2
Note: All part numbers are RoHS Compliant.
23
Catalog 82181
Revised 4-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
Soft Shell
Pin and Socket Connectors
AMP
High Density
Micro MATE-N-LOK 3 mm Connector System (Continued)
Receptacle Housings
(Continued)
Dual Row
Material
Micro MATE-N-LOK 3 mm Connector System
.118 [3.00] Centerline
Nylon, Black
Flammability Rating—UL 94V-0
Related Product Data
Contacts:
.553
[14.04]
Receptacle Contacts—page 22
Mateable Housings and
Headers:
.118
[3.00] Typ.
Dual Row Plug Housings—pages 27-28
Dual Row Vertical Pin Header
Assemblies—pages 34-37
Dual Row Right-Angle Pin Header
Assemblies—pages 43-47
.118
[3.00]
.461
.270 [11.70]
[6.86]
.251
[6.37]
A
Number
of Circuits
2
4
6
8
10
12
14
16
18
20
22
24
Dimension
A
.157
4.00
.276
7.00
.394
10.00
.512
13.00
.630
16.00
.748
19.00
.866
22.00
.984
25.00
1.102
28.00
1.220
31.00
1.339
34.00
1.457
37.00
Part
Numbers
794617-2
794617-4
794617-6
794617-8
1-794617-0
1-794617-2
1-794617-4
1-794617-6
1-794617-8
2-794617-0
2-794617-2
2-794617-4
Note: All part numbers are RoHS Compliant.
24
Catalog 82181
Revised 4-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
Soft Shell
Pin and Socket Connectors
AMP
Micro MATE-N-LOK 3 mm Connector System (Continued)
High Density
Plug Housings
Single Row, Free-Hanging
Material
Micro MATE-N-LOK 3 mm Connector System
.118 [3.00] Centerline
Nylon, Black
Flammability Rating—UL 94V-0
Related Product Data
Contacts:
Plug Contacts—page 22
.118
[3.00]Typ.
Mateable Housings:
Single Row Receptacle Housings—
page 23
.152
[3.86]
.335
[8.50]
A
.665
[16.89]
Number
of Circuits
2
3
4
5
6
7
8
9
10
11
12
Dimension
A
.270
6.85
.388
9.85
.506
12.85
.624
15.85
.742
18.85
.860
21.85
.978
24.85
1.096
27.85
1.215
30.85
1.333
33.85
1.451
36.85
Part
Numbers
1445049-2
1445049-3
1445049-4
1445049-5
1445049-6
1445049-7
1445049-8
1445049-9
1-1445049-0
1-1445049-1
1-1445049-2
Note: All part numbers are RoHS Compliant.
25
Catalog 82181
Revised 4-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
Soft Shell
Pin and Socket Connectors
AMP
High Density
Micro MATE-N-LOK 3 mm Connector System (Continued)
Plug Housings (Continued)
Single Row, Panel Mount
.125
[3.18]
.120
[3.05]
Material
.166
[4.21]
.217
[5.51]
Micro MATE-N-LOK 3 mm Connector System
.118 [3.00] Centerline
Nylon, Black
Flammability Rating—UL 94V-0
Related Product Data
Contacts:
B
Plug Contacts—page 22
C
Recommended Panel Cutout*
Mateable Housings:
Single Row Receptacle Housings—
page 23
.118
[3.00] Ref.
.152
[3.86]
.335
[8.50]
A
.665
[16.89]
Number
of Circuits
2
3
4
5
6
7
8
9
10
11
12
A
.270
6.85
.388
9.85
.506
12.85
.624
15.85
.742
18.85
.860
21.85
.978
24.85
1.096
27.85
1.215
30.85
1.333
33.85
1.451
36.85
Dimensions
B
.283
7.20
.402
10.20
.520
13.20
.638
16.20
.756
19.20
.874
22.20
.992
25.20
1.110
28.20
1.228
31.20
1.346
34.20
1.465
37.20
C
.428
10.88
.546
13.88
.665
16.88
.783
19.88
.901
22.88
1.019
25.88
1.137
28.88
1.255
31.88
1.373
34.88
1.491
37.88
1.609
40.88
Part
Numbers
1445048-2
1445048-3
1445048-4
1445048-5
1445048-6
1445048-7
1445048-8
1445048-9
1-1445048-0
1-1445048-1
1-1445048-2
*Recommended panel thickness .062-.091 [1.57-2.30]. Always consult customer drawing for panel cutout dimensions.
Note: All part numbers are RoHS Compliant.
26
Catalog 82181
Revised 4-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
Soft Shell
Pin and Socket Connectors
AMP
Micro MATE-N-LOK 3 mm Connector System (Continued)
High Density
Plug Housings (Continued)
Dual Row, Free-Hanging
Material
Micro MATE-N-LOK 3 mm Connector System
.118 [3.00] Centerline
Nylon, Black
Flammability Rating—UL 94V-0
Related Product Data
Contacts:
Plug Contacts—page 22
.118
[3.00] Ref.
Mateable Housings:
Dual Row Receptacle Housings—
page 24
.118
[3.00]
.270
[6.86]
.335
[8.50]
A
Number
of Circuits
2
4
6
8
10
12
14
16
18
20
22
24
.665
[16.89]
Dimension
A
.157
3.85
.276
6.85
.394
9.85
.512
12.85
.630
15.85
.748
18.85
.866
21.85
.984
24.85
1.102
27.85
1.220
30.85
1.339
33.85
1.457
36.85
Part
Numbers
794616-2
794616-4
794616-6
794616-8
1-794616-0
1-794616-2
1-794616-4
1-794616-6
1-794616-8
2-794616-0
2-794616-2
2-794616-4
Note: All part numbers are RoHS Compliant.
27
Catalog 82181
Revised 4-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
Soft Shell
Pin and Socket Connectors
AMP
High Density
Micro MATE-N-LOK 3 mm Connector System (Continued)
Plug Housings (Continued)
Dual Row, Panel Mount
.078
[1.98]
.160
[4.06]
Material
Micro MATE-N-LOK 3 mm Connector System
.118 [3.00] Centerline
Nylon, Black
Flammability Rating—UL 94V-0
.280
[7.11]
Related Product Data
Contacts:
.343
[8.71]
B
Plug Contacts—page 22
C
Mateable Housings:
Recommended Panel Cutout*
Dual Row Receptacle Housings—
page 24
.118
[3.00] Ref.
.270
[6.86]
.335
[8.50]
A
Number
of Circuits
2
4
6
8
10
12
14
16
18
20
22
24
A
.157
3.85
.276
6.85
.394
9.85
.512
12.85
.630
15.85
.748
18.85
.866
21.85
.984
24.85
1.102
27.85
1.220
30.85
1.339
33.85
1.457
36.85
.665
[16.89]
Dimensions
B
.165
4.20
.285
7.20
.402
10.20
.520
13.20
.638
16.20
.756
19.20
.874
22.20
.992
25.20
1.110
28.20
1.228
31.20
1.346
34.20
1.469
37.20
C
.310
7.88
.428
10.88
.546
13.88
.665
16.88
.783
19.88
.901
22.88
1.019
25.88
1.137
28.88
1.255
31.88
1.373
34.88
1.491
37.88
1.609
40.88
Part
Numbers
794615-2
794615-4
794615-6
794615-8
1-794615-0
1-794615-2
1-794615-4
1-794615-6
1-794615-8
2-794615-0
2-794615-2
2-794615-4
*Recommended panel thickness .062-.091 [1.57-2.30]. Always consult customer drawing for panel cutout dimensions.
Note: All part numbers are RoHS Compliant.
28
Catalog 82181
Revised 4-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
Soft Shell
Pin and Socket Connectors
AMP
Micro MATE-N-LOK 3 mm Connector System (Continued)
High Density
.118
[3.00]
New: Low Profile
.152
[3.86]
Low Profile Receptacle
Housings
.250
[6.37]
A
Material
Positions
Color
2
Black
3
Black
4
Black
2
Natural
3
Natural
4
Natural
Low Profile Right Angle
Surface Mount Housings
Dimension A
.276
7
.394
10
.512
13
.276
7
.394
10
.512
13
Micro MATE-N-LOK 3 mm Connector System
.118 [3.00] Centerline
Nylon, Black
Flammability Rating—V0
Part Numbers
2029047-2
2029047-3
2029047-4
2029102-2
2029102-3
2029102-4
A
.152
[3.86]
.020
[0.51]
Material
.439
[11.16]
C
Hight Temp Nylon, Black
Flammability Rating—V0
.118
Typ.
[3.00]
.050 ± .003
Typ.
[1.27 ± 0.08]
.115 ± .003
[2.92 ± 0.08]
Contacts:
Brass
Plating A — .0001100 (.00254)
minimum tin over .000050 [0.00127]
minimum nickel
.216
[5.48]
.025
[0.64]
Positions
Color
2
Black
3
Black
4
Black
2
Natural
3
Natural
4
Natural
.118
[3.00]
A
.394
10
.512
13
.630
16
.394
10
.512
13
.630
16
.143
[3.635]
B
Dimensions
B
.410
10.4
.528
13.4
.646
16.4
.410
10.4
.52
13.4
.646
16.4
C
.118
3
.263
6
.354
9
.118
3
.263
6
.354
9
Part
Numbers
2029030-2
2029030-3
2029030-4
2029104-2
2029104-3
2029104-4
Note: Less than 4.7mm in vertical board surface height required!
29
Catalog 82181
Revised 4-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
Soft Shell
Pin and Socket Connectors
AMP
High Density
PageHead_12_HelvCdBd
Micro
MATE-N-LOK 3 mm(Continued)
Connector System (Continued)
Vertical Header Assemblies
A
Micro MATE-N-LOK 3 mm Connector System
.118 [3.00] Centerline
Single Row, Through-Hole,
with Retention Feature
on Soldertail and
Polarization Feature
to PCB
.051
[1.30]
.364
[9.24] Ref.
.125
[3.18] Ref.
Circuit 1
.152
[3.86] .020
[0.51]
Material and Finish
Housing — High Temperature Nylon,
Black
Flammability Rating — UL 94V-0
Contacts — Brass
Plating A—.000100 [0.00254] min. tin
over .000050 [0.00127] min. nickel
Plating B—.000015 [0.00038] gold in
mating area, .000100 [0.00254] min. tin
in solder area, with entire contact
underplated .000050 [0.00127] min.
nickel
Plating C—.000030 [0.00076] gold in
mating area, .000100 [0.00254] min. tin
in solder area, with entire contact
underplated .000050 [0.00127] min.
nickel
Related Product Data
Mateable Housings:
Single Row Receptacle Housings—
page 23
.031
[0.80] Dia. Ref.
.118
[3.00] Typ.
C
.118
[3.00] Typ.
.077
[1.96]
.040
[1.02] Dia. Typ.
Circuit 1
.118
[3.00]
.050
[1.27] Dia. 2 Plc.
B
Recommended PC Board Layout*
Number of
Circuits
2
3
4
5
6
7
8
9
10
11
12
Dimensions
Header Part Numbers
A
B
C
.276
7.00
.394
10.00
.512
13.00
.630
16.00
.748
19.00
.866
22.00
.984
25.00
1.102
28.00
1.220
31.00
1.339
34.00
1.457
37.00
.360
9.14
.478
12.14
.596
15.14
.714
18.14
.832
21.14
.950
24.14
1.069
27.14
1.187
30.14
1.304
33.14
1.423
36.14
1.541
39.14
.118
3.00
.236
6.00
.354
9.00
.472
12.00
.591
15.00
.709
18.00
.827
21.00
.945
24.00
1.063
27.00
1.181
30.00
1.299
33.00
Plating A
Plating B
Plating C
Mates with
Receptacle Housing
Part Number
2-1445050-2
2-1445084-2
2-1445093-2
1445022-2
2-1445050-3
2-1445084-3
2-1445093-3
1445022-3
2-1445050-4
2-1445084-4
2-1445093-4
1445022-4
2-1445050-5
2-1445084-5
2-1445093-5
1445022-5
2-1445050-6
2-1445084-6
2-1445093-6
1445022-6
2-1445050-7
2-1445084-7
2-1445093-7
1445022-7
2-1445050-8
2-1445084-8
2-1445093-8
1445022-8
2-1445050-9
2-1445084-9
3-1445093-9
1445022-9
3-1445050-0
3-1445084-0
3-1445093-0
1-1445022-0
3-1445050-1
3-1445084-1
3-1445093-1
1-1445022-1
3-1445050-2
3-1445084-2
3-1445093-2
1-1445022-2
*Recommended PC Board thickness .062 [1.57]. Always consult customer drawing for PC Board layout dimensions.
Note: All part numbers are RoHS Compliant.
30
Catalog 82181
Revised 4-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
Soft Shell
Pin and Socket Connectors
AMP
PageHead_12_HelvCdBd
Micro
MATE-N-LOK 3 mm(Continued)
Connector System (Continued)
High Density
Vertical Header Assemblies
(Continued)
.364
[9.24] Ref.
A
.051
[1.30]
.125
[3.18] Ref.
Single Row, Through-Hole,
with Metal Through-Hole
Hold-down
Contact
Circuit 1
.152
[3.86]
Micro MATE-N-LOK 3 mm Connector System
.118 [3.00] Centerline
Hold-down
.020
[0.51]
Material and Finish
Housing — High Temperature Nylon,
Black
Flammability Rating — UL 94V-0
Contacts—Brass
Plating A—.000100 [0.00254] min. tin
over .000050 [0.00127] min. nickel
Plating B—.000015 [0.00038] gold in
mating area, .000100 [0.00254] min. tin
in solder area, with entire contact
underplated .000050 [0.00127] min.
nickel
Plating C—.000030 [0.00076] gold in
mating area, .000100 [0.00254] min. tin
in solder area, with entire contact
underplated .000050 [0.00127] min.
nickel
Hold-downs—Phosphor Bronze,
.000100 [0.00254] min. tin over
.000050 [0.00127] min. nickel
.118
[3.00] Ref.
C
.085
[2.15]
.095 Dia.
[2.41] 2 Plc.
Related Product Data
Mateable Housings:
B
Single Row Receptacle Housing—
page 23
Number of
Circuits
2
3
4
5
6
7
8
9
10
11
12
.040
[1.02] Dia. Typ.
.118
[3.00] Typ.
Recommended PC Board Layout*
Dimensions
Header Part Numbers
A
B
C
.399
10.14
.517
13.14
.635
16.14
.754
19.14
.871
22.14
.990
25.14
1.108
28.14
1.226
31.14
1.344
34.14
1.462
37.14
1.580
40.14
.293
7.43
.411
10.43
.529
13.43
.647
16.43
.765
19.43
.883
22.43
1.001
25.43
1.119
28.43
1.237
31.43
1.356
34.43
1.474
37.43
.118
3.00
.236
6.00
.354
9.00
.472
12.00
.591
15.00
.709
18.00
.827
21.00
.945
24.00
1.063
27.00
1.181
30.00
1.299
33.00
Plating A
Plating B
Plating C
Mates with
Receptacle Housing
Part Number
2-1445051-2
2-1445085-2
2-1445094-2
1445022-2
2-1445051-3
2-1445085-3
2-1445094-3
1445022-3
2-1445051-4
2-1445085-4
2-1445094-4
1445022-4
2-1445051-5
2-1445085-5
2-1445094-5
1445022-5
2-1445051-6
2-1445085-6
2-1445094-6
1445022-6
2-1445051-7
2-1445085-7
2-1445094-7
1445022-7
2-1445051-8
2-1445085-8
2-1445094-8
1445022-8
2-1445051-9
2-1445085-9
2-1445094-9
1445022-9
3-1445051-0
3-1445085-0
3-1445094-0
1-1445022-0
3-1445051-1
3-1445085-1
3-1445094-1
1-1445022-1
3-1445051-2
3-1445085-2
3-1445094-2
1-1445022-2
*Recommended PC Board thickness .062 [1.57]. Always consult customer drawing for PC Board layout dimensions.
Note: All part numbers are RoHS Compliant.
31
Catalog 82181
Revised 4-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
Soft Shell
Pin and Socket Connectors
AMP
High Density
PageHead_12_HelvCdBd
Micro
MATE-N-LOK 3 mm(Continued)
Connector System (Continued)
Vertical Header Assemblies
.364
[9.24] Ref.
(Continued)
Single Row, Surface Mount,
with Metal Through-Hole
Hold-down
.236
[6.00] Dia.
.118
[3.00] Ref.
.051
[1.30]
Contact
.113
[2.88] Ref.
.156
[3.97] Ref.
Circuit 1
Material and Finish
Micro MATE-N-LOK 3 mm Connector System
.118 [3.00] Centerline
Housing — High Temperature Nylon,
Black
Flammability Rating — UL 94V-0
.152
[3.86]
A
.010
[0.25]
Contacts—Brass
Plating A—.000100 [0.00254] min. tin
over .000050 [0.00127] min. nickel
Plating B—.000015 [0.00038] gold in
mating area, .000100 [0.00254] min. tin
in solder area, with entire contact
underplated .000050 [0.00127] min.
nickel
Plating C—.000030 [0.00076] gold in
mating area, .000100 [0.00254] min. tin
in solder area, with entire contact
underplated .000050 [0.00127] min.
nickel
Single Row Receptacle Housing—
page 23
C
.050
[1.27] Typ.
Hold-downs—Phosphor Bronze,
.000100 [0.00254] min. tin over
.000050 [0.00127] min. nickel
Related Product Data
Mateable Housings:
Hold-down
.020
[0.51]
Circuit 1
.118
[3.00] Typ.
.100
[2.54]
.126
[3.20]
.095
[2.41] Dia. 2 Plc.
.085
[2.15]
B
Recommended PC Board Layout*
Number of
Circuits
2
3
4
5
6
7
8
9
10
11
12
Dimensions
Header Part Numbers
A
B
C
.394
10.00
.512
13.00
.630
16.00
.748
19.00
.866
22.00
.984
25.00
1.102
28.00
1.220
31.00
1.339
34.00
1.457
37.00
1.575
40.00
.293
7.43
.411
10.43
.529
13.43
.647
16.43
.765
19.43
.883
22.43
1.001
25.43
1.119
28.43
1.237
31.43
1.356
34.43
1.474
37.43
.118
3.00
.236
6.00
.354
9.00
.472
12.00
.591
15.00
.709
18.00
.827
21.00
.945
24.00
1.063
27.00
1.181
30.00
1.299
33.00
Plating A
Plating B
Plating C
Mates with
Receptacle Housing
Part Number
2-1445052-2
2-1445086-2
2-1445095-2
1445022-2
2-1445052-3
2-1445086-3
2-1445095-3
1445022-3
2-1445052-4
2-1445086-4
2-1445095-4
1445022-4
2-1445052-5
2-1445086-5
2-1445095-5
1445022-5
2-1445052-6
2-1445086-6
2-1445095-6
1445022-6
2-1445052-7
2-1445086-7
2-1445095-7
1445022-7
2-1445052-8
2-1445086-8
2-1445095-8
1445022-8
2-1445052-9
2-1445086-9
2-1445095-9
1445022-9
3-1445052-0
3-1445086-0
3-1445095-0
1-1445022-0
3-1445052-1
3-1445086-1
3-1445095-1
1-1445022-1
3-1445052-2
3-1445086-2
3-1445095-2
1-1445022-2
*Recommended PC Board thickness .062 [1.57]. Always consult customer drawing for PC Board layout dimensions.
Note: All part numbers are RoHS Compliant.
32
Catalog 82181
Revised 4-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
Soft Shell
Pin and Socket Connectors
AMP
PageHead_12_HelvCdBd
Micro
MATE-N-LOK 3 mm(Continued)
Connector System (Continued)
.236
[6.00] Dia.
(Continued)
.118
[3.00] Ref.
.051
[1.30]
Circuit 1
Single Row, Surface Mount,
with Surface Mount Hold-down
Housing — High Temperature Nylon,
Black
Flammability Rating — UL 94V-0
Hold-down
.020
[0.51]
Micro MATE-N-LOK 3 mm Connector System
.118 [3.00] Centerline
.152
[3.86]
Material and Finish
A
Contacts—Brass
Plating A—.000100 [0.00254] min. tin
over .000050 [0.00127] min. nickel
Plating B—.000015 [0.00038] gold in
mating area, .000100 [0.00254] min. tin
in solder area, with entire contact
underplated .000050 [0.00127] min.
nickel
Plating C—.000030 [0.00076] gold in
mating area, .000100 [0.00254] min. tin
in solder area, with entire contact
underplated .000050 [0.00127] min.
nickel
Hold-downs—Phosphor Bronze,
.000100 [0.00254] min. tin over
.000050 [0.00127] min. nickel
.156
[3.97] Ref.
Contact
C
.050±.003
[1.27±0.08] Typ.
.118
3.00 Typ.
Circuit 1
.100±.003
[2.54±0.08]
.126
[3.20]
.065±.003
[1.65±0.08] 2 Plc.
Related Product Data
Mateable Housings:
.143
[3.635]
Single Row Receptacle Housing—
page 23
.135±.003
[3.43±0.08] 2 Plc.
B
Recommended PC Board Layout*
Number of
Circuits
2
3
4
5
6
7
8
9
10
11
12
Dimensions
Header Part Numbers
A
B
C
.394
10.00
.512
13.00
.630
16.00
.748
19.00
.866
22.00
.984
25.00
1.102
28.00
1.220
31.00
1.339
34.00
1.457
37.00
1.575
40.00
.410
10.41
.528
13.41
.646
16.41
.765
19.41
.882
22.41
1.001
25.41
1.119
28.41
1.237
31.41
1.355
34.41
1.473
37.41
1.591
40.41
.118
3.00
.236
6.00
.354
9.00
.472
12.00
.591
15.00
.709
18.00
.827
21.00
.945
24.00
1.063
27.00
1.181
30.00
1.299
33.00
Plating A
Plating B
Plating C
Mates with
Receptacle Housing
Part Number
2-1445053-2
2-1445087-2
2-1445096-2
1445022-2
2-1445053-3
2-1445087-3
2-1445096-3
1445022-3
2-1445053-4
2-1445087-4
2-1445096-4
1445022-4
2-1445053-5
2-1445087-5
2-1445096-5
1445022-5
2-1445053-6
2-1445087-6
2-1445096-6
1445022-6
2-1445053-7
2-1445087-7
2-1445096-7
1445022-7
2-1445053-8
2-1445087-8
2-1445096-8
1445022-8
2-1445053-9
2-1445087-9
2-1445096-9
1445022-9
3-1445053-0
3-1445087-0
3-1445096-0
1-1445022-0
3-1445053-1
3-1445087-1
3-1445096-1
1-1445022-1
3-1445053-2
3-1445087-2
3-1445096-2
1-1445022-2
*Always consult customer drawing for PC Board layout dimensions.
Note: All part numbers are RoHS Compliant.
33
Catalog 82181
Revised 4-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
High Density
.364
[9.24] Ref.
Vertical Header Assemblies
Soft Shell
Pin and Socket Connectors
AMP
High Density
PageHead_12_HelvCdBd
Micro
MATE-N-LOK 3 mm(Continued)
Connector System (Continued)
.270
[6.86]
Vertical Header Assemblies
(Continued)
.118
[3.00]
Z
Dual Row, Through-Hole,
with Retention Feature
on Soldertail
Micro MATE-N-LOK 3 mm Connector System
.118 [3.00] Centerline
.364
[9.24]
Material and Finish
Housing — High Temperature Nylon,
Black
Flammability Rating — UL 94V-0
Z
Contacts—Brass
Plating A—.000100 [0.00254] min. tin
over .000050 [0.00127] min. nickel
Plating B—.000015 [0.00038] gold in
mating area, .000100 [0.00254] min. tin
in solder area, with entire contact
underplated .000050 [0.00127] min.
nickel
Plating C—.000030 [0.00076] gold in
mating area, .000100 [0.00254] min. tin
in solder area, with entire contact
underplated .000050 [0.00127] min.
nickel
.118
[3.00]
.125
[3.18]
Section Z-Z
A
Retention Feature Located
On End Contacts Only
4 Plc. Ref.
.341
[8.67]
B
.138
[3.50] Min.
.118
[3.00] Typ.
Hold-downs—Phosphor Bronze,
.000100 [0.00254] min. tin over
.000050 [0.00127] min. nickel
.118
[3.00]
Related Product Data
Mateable Housings:
.079
[2.00] Min.
.040
[1.02] Dia. Typ.
Dual Row Receptacle Housing—page 24
Recommended PC Board Layout*
Number of
Circuits
2
4
6
8
10
12
14
16
18
20
22
24
A
B
Plating A
Plating B
Plating C
Mates with
Receptacle Housing
Part Number
.276
7.00
.394
10.00
.512
13.00
.630
16.00
.748
19.00
.866
22.00
.984
25.00
1.102
28.00
1.220
31.00
1.339
34.00
1.457
37.00
1.575
40.00
—
3-794630-2
3-794631-2
3-794632-2
794617-2
.118
3.00
.236
6.00
.354
9.00
.472
12.00
.591
15.00
.709
18.00
.827
21.00
.945
24.00
1.063
27.00
1.181
30.00
1.299
33.00
3-794630-4
3-794631-4
3-794632-4
794617-4
3-794630-6
3-794631-6
3-794632-6
794617-6
3-794630-8
3-794631-8
3-794632-8
794617-8
4-794630-0
4-794631-0
4-794632-0
1-794617-0
4-794630-2
4-794631-2
4-794632-2
1-794617-2
4-794630-4
4-794631-4
4-794632-4
1-794617-4
4-794630-6
4-794631-6
4-794632-6
1-794617-6
4-794630-8
4-794631-8
4-794632-8
1-794617-8
5-794630-0
5-794631-0
5-794632-0
2-794617-0
5-794630-2
5-794631-2
5-794632-2
2-794617-2
5-794630-4
5-794631-4
5-794632-4
2-794617-4
Dimensions
Header Part Numbers
*Recommended PC Board thickness .062 [1.57]. Always consult customer drawing for PC Board layout dimensions.
Note: All part numbers are RoHS Compliant.
34
Catalog 82181
Revised 4-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
Soft Shell
Pin and Socket Connectors
AMP
PageHead_12_HelvCdBd
Micro
MATE-N-LOK 3 mm(Continued)
Connector System (Continued)
.118
[3.00]
Z
(Continued)
Dual Row, Through-Hole,
with Retention Feature
on Soldertail and
Metal Through-Hole Hold-down
High Density
.270
[6.86]
Vertical Header Assemblies
.364
[9.24]
Contact
Micro MATE-N-LOK 3 mm Connector System
.118 [3.00] Centerline
Material and Finish
Housing—High Temperature Nylon,
Black
Flammability Rating—UL 94V-0
.125
[3.18]
.118
[3.00]
Z
Section Z-Z
A
Contacts—Brass
Plating A—.000100 [0.00254] min. tin
over .000050 [0.00127] min. nickel
Plating B—.000015 [0.00038] gold in
mating area, .000100 [0.00254] min. tin
in solder area, with entire contact
underplated .000050 [0.00127] min.
nickel
Plating C—.000030 [0.00076] gold in
mating area, .000100 [0.00254] min. tin
in solder area, with entire contact
underplated .000050 [0.00127] min.
nickel
Hold-downs—Phosphor Bronze,
.000100 [0.00254] min. tin over
.000050 [0.00127] min. nickel
Hold-down
Retention Feature Located
On End Contacts Only
4 Plc. Ref.
.341
[8.67]
B
.084
[2.13]
.118
[3.00]
.059
[1.50]
.118
[3.00]
.095
[2.41] Dia. Typ.
Related Product Data
Mateable Housings:
.040
[1.02] Dia. Typ.
.087
[2.20] Min.
.079
[2.00] Min.
C
Dual Row Receptacle Housing—page 24
Recommended PC Board Layout*
Number of
Circuits
2
4
6
8
10
12
14
16
18
20
22
24
Dimensions
Header Part Numbers
Mates with
Receptacle Housing
Part Number
A
B
C
Plating A
Plating B
Plating C
.276
7.00
.394
10.00
.512
13.00
.630
16.00
.748
19.00
.866
22.00
.984
25.00
1.102
28.00
1.220
31.00
1.339
34.00
1.457
37.00
1.575
40.00
—
.169
4.30
.287
7.30
.406
10.30
.524
13.30
.642
16.30
.760
19.30
.878
22.30
.996
25.30
1.114
28.30
1.232
31.30
1.350
34.30
1.469
37.30
3-794680-2
3-794681-2
3-794682-2
794617-2
3-794680-4
3-794681-4
3-794682-4
794617-4
3-794680-6
3-794681-6
3-794682-6
794617-6
3-794680-8
3-794681-8
3-794682-8
794617-8
4-794680-0
4-794681-0
4-794682-0
1-794617-0
4-794680-2
4-794681-2
4-794682-2
1-794617-2
4-794680-4
4-794681-4
4-794682-4
1-794617-4
4-794680-6
4-794681-6
4-794682-6
1-794617-6
4-794680-8
4-794681-8
4-794682-8
1-794617-8
5-794680-0
5-794681-0
5-794682-0
2-794617-0
5-794680-2
5-794681-2
5-794682-2
2-794617-2
5-794680-4
5-794681-4
5-794682-4
2-794617-4
.118
3.00
.236
6.00
.354
9.00
.472
12.00
.591
15.00
.709
18.00
.827
21.00
.945
24.00
1.063
27.00
1.181
30.00
1.299
33.00
*Recommended PC Board thickness .062 [1.57]. Always consult customer drawing for PC Board layout dimensions.
Note: All part numbers are RoHS Compliant.
35
Catalog 82181
Revised 4-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
Soft Shell
Pin and Socket Connectors
AMP
High Density
PageHead_12_HelvCdBd
Micro
MATE-N-LOK 3 mm(Continued)
Connector System (Continued)
.118
[3.00] Typ.
Vertical Header Assemblies
(Continued)
.431
[10.94]
Micro MATE-N-LOK 3 mm Connector System
.118 [3.00] Centerline
Dual Row, Surface Mount,
with Metal Through-Hole
Hold-down
.236
[6.00] Dia.
Material and Finish
Housing—High Temperature Nylon,
Black
Flammability Rating—UL 94V-0
Contacts—Brass
Plating A—.000100 [0.00254] min. tin
over .000050 [0.00127] min. nickel
Plating B—.000015 [0.00038] gold in
mating area, .000100 [0.00254] min. tin
in solder area, with entire contact
underplated .000050 [0.00127] min.
nickel
Plating C—.000030 [0.00076] gold in
mating area, .000100 [0.00254] min. tin
in solder area, with entire contact
underplated .000050 [0.00127] min.
nickel
B
6
8
10
12
14
16
18
20
22
24
.185
[4.70]
.370
[9.40]
.050
[1.27]
.095
[2.41] Dia. 2 Plc.
.098
[2.50] Min.
.087
[2.20] Min.
Circuit 1
.084
[2.14]
C
Dual Row Receptacle Housing—page 24
4
.025
[0.635]
.100
[2.54] Typ.
Related Product Data
Mateable Housings:
Hold-down
.118
[3.00]
.050
[1.27] Typ.
Pick-up Button—Kapton
2
Contact
.364
.477 [9.24]
[12.12]
Hold-downs—Phosphor Bronze,
.000100 [0.00254] min. tin over
.000050 [0.00127] min. nickel
Number of
Circuits
.270
[6.86]
.010
[0.25]
A
Recommended PC Board Layout*
Dimensions
A
.276
7.00
.394
10.00
.512
13.00
.630
16.00
.748
19.00
.866
22.00
.984
25.00
1.10
28.00
1.220
31.00
1.339
34.00
1.457
37.00
1.575
40.00
Header Part Numbers
Mates with
Receptacle Housing
Part Number
B
C
Plating A
Plating B
Plating C
—
.169
4.30
.287
7.30
.406
10.30
.524
13.30
.642
16.30
.760
19.30
.878
22.30
.996
25.30
1.114
28.30
1.232
31.30
1.350
34.30
1.469
37.30
3-794633-2
3-794634-2
3-794635-2
794617-2
3-794633-4
3-794634-4
3-794635-4
794617-4
3-794633-6
3-794634-6
3-794635-6
794617-6
3-794633-8
3-794634-8
3-794635-8
794617-8
4-794633-0
4-794634-0
4-794635-0
1-794617-0
4-794633-2
4-794634-2
4-794635-2
1-794617-2
4-794633-4
4-794634-4
4-794635-4
1-794617-4
4-794633-6
4-794634-6
4-794635-6
1-794617-6
4-794633-8
4-794634-8
4-794635-8
1-794617-8
5-794633-0
5-794634-0
5-794635-0
2-794617-0
5-794633-2
5-794634-2
5-794635-2
2-794617-2
5-794633-4
5-794634-4
5-794635-4
2-794617-4
.118
3.00
.236
6.00
.354
9.00
.472
12.00
.591
15.00
.709
18.00
2.827
21.00
0.945
24.00
1.063
27.00
1.181
30.00
1.299
33.00
*Recommended PC Board thickness .062 [1.57]. Always consult customer drawing for PC Board layout dimensions.
Note: All part numbers are RoHS Compliant.
36
Catalog 82181
Revised 4-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
Soft Shell
Pin and Socket Connectors
AMP
PageHead_12_HelvCdBd
Micro
MATE-N-LOK 3 mm(Continued)
Connector System (Continued)
High Density
Vertical Header Assemblies
.118
[3.00] Typ.
(Continued)
Dual Row, Surface Mount,
with Surface Mount Hold-down
.431
[10.94]
Housing — High Temperature Nylon,
Black
Flammability Rating — UL 94V-0
.236
[6.00] Dia.
A
Contacts—Brass
Plating A—.000100 [0.00254] min. tin
over .000050 [0.00127] min. nickel
Plating B—.000015 [0.00038] gold in
mating area, .000100 [0.00254] min. tin
in solder area, with entire contact
underplated .000050 [0.00127] min.
nickel
Plating C—.000030 [0.00076] gold in
mating area, .000100 [0.00254] min. tin
in solder area, with entire contact
underplated .000050 [0.00127] min.
nickel
Hold-downs—Phosphor Bronze,
.000100 [0.00254] min. tin over
.000050 [0.00127] min. nickel
Hold-down
.050
[1.27] Typ.
.025
.068 [.635]
[1.715]
6
8
10
12
14
16
18
20
22
24
.118
[3.00]
.100
[2.54]
.050
[1.27]
.370
[9.40] .185
[4.70]
.032
[0.825]
.098
[2.50] Min.
.065
[1.65] Typ.
Circuit 1
.118
[3.00] Min.
.135
[3.43] Typ.
C
Dual Row Receptacle Housing—page 24
4
Contact
B
Related Product Data
Mateable Housings:
2
.270
[6.86]
.010
[0.25]
.364
[9.24]
Pick-up Button — Kapton
Number of
Circuits
Micro MATE-N-LOK 3 mm Connector System
.118 [3.00] Centerline
Material and Finish
Recommended PC Board Layout*
Dimensions
A
.276
7.00
.394
10.00
.512
13.00
.630
16.00
.748
19.00
.866
22.00
.984
25.00
1.102
28.00
1.220
31.00
1.339
34.00
1.457
37.00
1.575
40.00
Header Part Numbers
Mates with
Receptacle Housing
Part Number
B
C
Plating A
Plating B
Plating C
—
.286
7.27
.404
10.27
.522
13.27
.640
16.27
.758
19.27
.876
22.27
.994
25.27
1.112
28.27
1.230
31.27
1.349
34.27
1.467
37.27
1.585
40.27
3-794636-2
3-794637-2
3-794638-2
794617-2
3-794636-4
3-794637-4
3-794638-4
794617-4
3-794636-6
3-794637-6
3-794638-6
794617-6
3-794636-8
3-794637-8
3-794638-8
794617-8
4-794636-0
4-794637-0
4-794638-0
1-794617-0
4-794636-2
4-794637-2
4-794638-2
1-794617-2
4-794636-4
4-794637-4
4-794638-4
1-794617-4
4-794636-6
4-794637-6
4-794638-6
1-794617-6
4-794636-8
4-794637-8
4-794638-8
1-794617-8
5-794636-0
5-794637-0
5-794638-0
2-794617-0
5-794636-2
5-794637-2
5-794638-2
2-794617-2
5-794636-4
5-794637-4
5-794638-4
2-794617-4
.118
3.00
.236
6.00
.354
9.00
.472
12.00
.591
15.00
.709
18.00
.827
21.00
.945
24.00
1.063
27.00
1.181
30.00
1.299
33.00
*Always consult customer drawing for PC Board layout dimensions.
Note: All part numbers are RoHS Compliant.
37
Catalog 82181
Revised 4-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
Soft Shell
Pin and Socket Connectors
AMP
High Density
PageHead_12_HelvCdBd
Micro
MATE-N-LOK 3 mm(Continued)
Connector System (Continued)
Right-Angle Header
Assemblies
A
.051
[1.30]
.152
[3.86]
Hold-down
Single Row, Through-Hole,
with Metal Through-Hole
Hold-down
Contact
.285
[7.25] Ref.
Micro MATE-N-LOK 3 mm Connector System
.118 [3.00] Centerline
Circuit 1
.020
[0.51]
.351
[8.92] Ref.
Material and Finish
.118
[3.00] Ref.
Housing—High Temperature Nylon,
Black
Flammability Rating—UL 94V-0
Contacts—Brass
Plating A—.000100 [0.00254] min. tin
over .000050 [0.00127] min. nickel
Plating B—.000015 [0.00038] gold in
mating area, .000100 [0.00254] min. tin
in solder area, with entire contact
underplated .000050 [0.00127] min.
nickel
Plating C—.000030 [0.00076] gold in
mating area, .000100 [0.00254] min. tin
in solder area, with entire contact
underplated .000050 [0.00127] min.
nickel
C
.170
[4.32]
Hold-downs—Phosphor Bronze,
.000100 [0.00254] min. tin over
.000050 [0.00127] min. nickel
Related Product Data
Mateable Housings:
Circuit 1
.095
[2.41] Dia. 2 Plc.
Single Row Receptacle Housing—
page 23
Number of
Circuits
2
3
4
5
6
7
8
9
10
11
12
.040
[1.02] Dia. Typ.
.118
[3.00] Typ.
.085
[2.15]
B
Recommended PC Board Layout*
Dimensions
Header Part Numbers
A
B
C
.399
10.14
.517
13.14
.635
16.14
.754
19.14
.871
22.14
.990
25.14
1.108
28.14
1.226
31.14
1.344
34.14
1.462
37.14
1.580
40.14
.293
7.43
.411
10.43
.529
13.43
.647
16.43
.765
19.43
.883
22.43
1.001
25.43
1.119
28.43
1.237
31.43
1.356
34.43
1.474
37.43
.118
3.00
.236
6.00
.354
9.00
.472
12.00
.591
15.00
.709
18.00
.827
21.00
.945
24.00
1.063
27.00
1.181
30.00
1.299
33.00
Plating A
Plating B
Plating C
Mates with
Receptacle Housing
Part Number
2-1445054-2
2-1445088-2
2-1445097-2
1445022-2
2-1445054-3
2-1445088-3
2-1445097-3
1445022-3
2-1445054-4
2-1445088-4
2-1445097-4
1445022-4
2-1445054-5
2-1445088-5
2-1445097-5
1445022-5
2-1445054-6
2-1445088-6
2-1445097-6
1445022-6
2-1445054-7
2-1445088-7
2-1445097-7
1445022-7
2-1445054-8
2-1445088-8
2-1445097-8
1445022-8
2-1445054-9
2-1445088-9
2-1445097-9
1445022-9
3-1445054-0
3-1445088-0
3-1445097-0
1-1445022-0
3-1445054-1
3-1445088-1
3-1445097-1
1-1445022-1
3-1445054-2
3-1445088-2
3-1445097-2
1-1445022-2
*Recommended PC Board thickness .062 [1.57]. Always consult customer drawing for PC Board layout dimensions.
Note: All part numbers are RoHS Compliant.
38
Catalog 82181
Revised 4-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
Soft Shell
Pin and Socket Connectors
AMP
PageHead_12_HelvCdBd
Micro
MATE-N-LOK 3 mm(Continued)
Connector System (Continued)
High Density
Right-Angle Header
Assemblies (Continued)
A
.051
[1.30]
.152
[3.86]
Circuit 1
Single Row, Through-Hole,
with Plastic Boardlock
.002
[0.51]
Material and Finish
Housing — High Temperature Nylon,
Black
Flammability Rating — UL 94V-0
Contacts—Brass
Plating A—.000100 [0.00254] min. tin
over .000050 [0.00127] min. nickel
Plating B—.000015 [0.00038] gold in
mating area, .000100 [0.00254] min. tin
in solder area, with entire contact
underplated .000050 [0.00127] min.
nickel
Plating C—.000030 [0.00076] gold in
mating area, .000100 [0.00254] min. tin
in solder area, with entire contact
underplated .000050 [0.00127] min.
nickel
Single Row Receptacle Housing—
page 23
.118
[3.00]
Circuit 1
.118
[3.00] Dia.
2
3
4
5
6
7
8
9
10
11
12
.236
[6.00]
.118
[3.00]
.118
[3.00] Typ.
.170
[4.32]
.040 Dia.
[1.02] 3 Plc.
Circuit 1
.118 Dia.
[3.00] 2 Plc.
.170
[4.32]
.059
[1.50]
Circuit 1
.085
[2.15]
B
.118
[3.00] Dia.
Recommended PC Board Layout
2 Position*
Number of
Circuits
C
.040
[1.02] Dia.Typ.
.170
[4.32]
Related Product Data
Mateable Housings:
.351
[8.92] Ref.
.118
[3.00] Ref.
.040 Dia.
[1.02] 2 Plc.
Micro MATE-N-LOK 3 mm Connector System
.118 [3.00] Centerline
.310
[7.88] Ref.
Recommended
PC Board Layout
3 Position*
Dimensions
Recommended PC Board Layout
4-12 Position*
Header Part Numbers
Plating A
Plating B
Plating C
Mates with
Receptacle Housing
Part Number
A
B
C
.399
10.14
.517
13.14
.635
16.14
.754
19.14
.871
22.14
.990
25.14
1.108
28.14
1.226
31.14
1.344
34.14
1.462
37.14
1.580
40.14
—
—
2-1445055-2
2-1445089-2
2-1445098-2
1445022-2
—
—
2-1445055-3
2-1445089-3
2-1445098-3
1445022-3
.185
4.70
.303
7.70
.421
10.70
.539
13.70
.657
16.70
.775
19.70
.894
22.70
1.012
25.70
1.300
28.70
.354
9.00
.472
12.00
.591
15.00
.709
18.00
.827
21.00
.945
24.00
1.063
27.00
1.181
30.00
1.299
33.00
2-1445055-4
2-1445089-4
2-1445098-4
1445022-4
2-1445055-5
2-1445089-5
2-1445098-5
1445022-5
2-1445055-6
2-1445089-6
2-1445098-6
1445022-6
2-1445055-7
2-1445089-7
2-1445098-7
1445022-7
2-1445055-8
2-1445089-8
2-1445098-8
1445022-8
2-1445055-9
2-1445089-9
2-1445098-9
1445022-9
3-1445055-0
3-1445089-0
3-1445098-0
1-1445022-0
3-1445055-1
3-1445089-1
3-1445098-1
1-1445022-1
3-1445055-2
3-1445089-2
3-1445098-2
1-1445022-2
*Recommended PC Board thickness .062 [1.57]. Always consult customer drawing for PC Board layout dimensions.
Note: All part numbers are RoHS Compliant.
39
Catalog 82181
Revised 4-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
Soft Shell
Pin and Socket Connectors
AMP
High Density
PageHead_12_HelvCdBd
Micro
MATE-N-LOK 3 mm(Continued)
Connector System (Continued)
Right-Angle Header
Assemblies (Continued)
A
.152
[3.86]
Single Row, Surface Mount,
with Metal Through-Hole
Hold-down
Micro MATE-N-LOK 3 mm Connector System
.118 [3.00] Centerline
.051
[1.30]
Circuit 1
Hold-down
Contact
.285
[7.25] Ref.
.020
[0.51]
Material and Finish
.439
[11.16] Ref.
Housing — High Temperature Nylon,
Black
Flammability Rating — UL 94V-0
Contacts—Brass
Plating A—.000100 [0.00254] min. tin
over .000050 [0.00127] min. nickel
Plating B—.000015 [0.00038] gold in
mating area, .000100 [0.00254] min. tin
in solder area, with entire contact
underplated .000050 [0.00127] min.
nickel
Plating C—.000030 [0.00076] gold in
mating area, .000100 [0.00254] min. tin
in solder area, with entire contact
underplated .000050 [0.00127] min.
nickel
.118
[3.00] Ref.
C
.050
[1.27] Typ.
.118
[3.00] Typ.
.115
[2.92]
Hold-downs—Phosphor Bronze,
.000100 [0.00254] min. tin over
.000050 [0.00127] min. nickel
Related Product Data
Mateable Housings:
.216
[5.48]
Circuit 1
.095
[2.41] Dia. 2 Plc.
.085
[2.15]
Single Row Receptacle Housing—
page 23
B
Recommended PC Board Layout*
Number of
Circuits
2
3
4
5
6
7
8
9
10
11
12
Dimensions
Header Part Numbers
A
B
C
.394
10.00
.512
13.00
.630
16.00
.748
19.00
.866
22.00
.984
25.00
1.102
28.00
1.220
31.00
1.339
34.00
1.457
37.00
1.575
40.00
.293
7.43
.411
10.43
.529
13.43
.647
16.43
.765
19.43
.883
22.43
1.001
25.43
1.119
28.43
1.237
31.43
1.356
34.43
1.474
37.43
.118
3.00
.236
6.00
.354
9.00
.472
12.00
.591
15.00
.709
18.00
.827
21.00
0.945
24.00
1.063
27.00
1.181
30.00
1.299
33.00
Plating A
Plating B
Plating C
Mates with
Receptacle Housing
Part Number
2-1445056-2
2-1445090-2
2-1445099-2
1445022-2
2-1445056-3
2-1445090-3
2-1445099-3
1445022-3
2-1445056-4
2-1445090-4
2-1445099-4
1445022-4
2-1445056-5
2-1445090-5
2-1445099-5
1445022-5
2-1445056-6
2-1445090-6
2-1445099-6
1445022-6
2-1445056-7
2-1445090-7
2-1445099-7
1445022-7
2-1445056-8
2-1445090-8
2-1445099-8
1445022-8
2-1445056-9
2-1445090-9
2-1445099-9
1445022-9
3-1445056-0
3-1445090-0
3-1445099-0
1-1445022-0
3-1445056-1
3-1445090-1
3-1445099-1
1-1445022-1
3-1445056-2
3-1445090-2
3-1445099-2
1-1445022-2
*Recommended PC Board thickness .062 [1.57]. Always consult customer drawing for PC Board layout dimensions.
Note: All part numbers are RoHS Compliant.
40
Catalog 82181
Revised 4-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
Soft Shell
Pin and Socket Connectors
AMP
PageHead_12_HelvCdBd
Micro
MATE-N-LOK 3 mm(Continued)
Connector System (Continued)
A
High Density
Right-Angle Header
Assemblies (Continued)
.051
[1.30]
Circuit 1
.152
[3.86]
Hold-down
Single Row, Surface Mount,
with Surface Mount
Hold-down
Contact
.020
[0.51]
Micro MATE-N-LOK 3 mm Connector System
.118 [3.00] Centerline
.439
[11.16] Ref.
Material and Finish
Housing — High Temperature Nylon,
Black
Flammability Rating — UL 94V-0
Contacts—Brass
Plating A—.000100 [0.00254] min. tin
over .000050 [0.00127] min. nickel
Plating B—.000015 [0.00038] gold in
mating area, .000100 [0.00254] min. tin
in solder area, with entire contact
underplated .000050 [0.00127] min.
nickel
Plating C—.000030 [0.00076] gold in
mating area, .000100 [0.00254] min. tin
in solder area, with entire contact
underplated .000050 [0.00127] min.
nickel
Hold-downs—Phosphor Bronze,
.000100 [0.00254] min. tin over
.000050 [0.00127] min. nickel
.118
[3.00] Ref.
C
.118
[3.00] Typ.
.050
[1.27] Typ.
3
4
5
6
7
8
9
10
11
12
.135
[3.43] 2 Plc.
.143
[3.635]
.065
[1.65]
B
Single Row Receptacle Housing—
page 23
2
.115
[2.92]
.216
[5.48]
Related Product Data
Mateable Housings:
Number of
Circuits
Circuit 1
Recommended PC Board Layout*
Dimensions
Header Part Numbers
A
B
C
.394
10.00
.512
13.00
.630
16.00
.748
19.00
.866
22.00
.984
25.00
1.102
28.00
1.220
31.00
1.339
34.00
1.457
37.00
1.575
40.00
.410
10.41
.528
13.41
.646
16.41
.764
19.41
.882
22.41
1.000
25.41
1.119
28.41
1.237
31.41
1.355
34.41
1.472
37.41
1.591
40.41
.118
3.00
.236
6.00
.354
9.00
.472
12.00
.591
15.00
.709
18.00
.827
21.00
.945
24.00
1.063
27.00
1.181
30.00
1.299
33.00
Plating A
Plating B
Plating C
Mates with
Receptacle Housing
Part Number
2-1445057-2
2-1445091-2
2-1445100-2
1445022-2
2-1445057-3
2-1445091-3
2-1445100-3
1445022-3
2-1445057-4
2-1445091-4
2-1445100-4
1445022-4
2-1445057-5
2-1445091-5
2-1445100-5
1445022-5
2-1445057-6
2-1445091-6
2-1445100-6
1445022-6
2-1445057-7
2-1445091-7
2-1445100-7
1445022-7
2-1445057-8
2-1445091-8
2-1445100-8
1445022-8
2-1445057-9
2-1445091-9
2-1445100-9
1445022-9
3-1445057-0
3-1445091-0
3-1445100-0
1-1445022-0
3-1445057-1
3-1445091-1
3-1445100-1
1-1445022-1
3-1445057-2
3-1445091-2
3-1445100-2
1-1445022-2
*Always consult customer drawing for PC Board layout dimensions.
Note: All part numbers are RoHS Compliant.
41
Catalog 82181
Revised 4-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
Soft Shell
Pin and Socket Connectors
AMP
High Density
PageHead_12_HelvCdBd
Micro
MATE-N-LOK 3 mm(Continued)
Connector System (Continued)
Right-Angle Header
Assemblies (Continued)
A
.051
[1.30]
.152
[3.86]
Circuit 1
Single Row, Surface Mount,
with Plastic Boardlock
.310
[7.88] Ref.
Micro MATE-N-LOK 3 mm Connector System
.118 [3.00] Centerline
.020
[0.51]
Material and Finish
.181
[4.60] Ref.
Housing — High Temperature Nylon,
Black
Flammability Rating — UL 94V-0
Contacts—Brass
Plating A—.000100 [0.00254] min. tin
over .000050 [0.00127] min. nickel
Plating B—.000015 [0.00038] gold in
mating area, .000100 [0.00254] min. tin
in solder area, with entire contact
underplated .000050 [0.00127] min.
nickel
Plating C—.000030 [0.00076] gold in
mating area, .000100 [0.00254] min. tin
in solder area, with entire contact
underplated .000050 [0.00127] min.
nickel
Related Product Data
Mateable Housings:
.439
[11.16] Ref.
.118
[3.00] Ref.
C
.059
[1.50]
.050
[1.27] Typ.
.236
[6.00]
.118
[3.00]
.118
[3.00]
.050
[1.27] Typ.
.115
[2.92]
.216
[5.48]
Circuit 1
.216
[5.48]
Recommended PC Board Layout *
2 Position
.118
[3.00] Dia. 2 Plc.
Circuit 1
.118
[3.00] Dia.
.118
[3.00] Dia.
.118
[3.00] Typ.
.115
[2.92]
.216
[5.48]
Circuit 1
Single Row Receptacle Housing—
page 23
.050
[1.27] Typ.
.115
[2.92]
.085
[2.15]
B
Recommended PC Board Layout *
3 Position
Recommended PC Board Layout*
4-12 Positions
Number of
Circuits
2
3
4
5
6
7
8
9
10
11
12
Dimensions
Header Part Numbers
Plating A
Plating B
Plating C
Mates with
Receptacle Housing
Part Number
A
B
C
.394
10.00
.512
13.00
.630
16.00
.748
19.00
.866
22.00
.984
25.00
1.102
28.00
1.220
31.00
1.339
34.00
1.457
37.00
1.575
40.00
—
—
2-1445058-2
2-1445092-2
2-1445101-2
1445022-2
—
—
2-1445058-3
2-1445092-3
2-1445101-3
1445022-3
.185
4.70
.303
7.70
.421
10.70
.539
13.70
.657
16.70
.776
19.70
.894
22.70
1.012
25.70
1.130
28.70
.354
9.00
.472
12.00
.591
15.00
.709
18.00
.827
21.00
.945
24.00
1.063
27.00
1.181
30.00
1.299
33.00
2-1445058-4
2-1445092-4
2-1445101-4
1445022-4
2-1445058-5
2-1445092-5
2-1445101-5
1445022-5
2-1445058-6
2-1445092-6
2-1445101-6
1445022-6
2-1445058-7
2-1445092-7
2-1445101-7
1445022-7
2-1445058-8
2-1445092-8
2-1445101-8
1445022-8
2-1445058-9
2-1445092-9
2-1445101-9
1445022-9
3-1445058-0
3-1445092-0
3-1445101-0
1-1445022-0
3-1445058-1
3-1445092-1
3-1445101-1
1-1445022-1
3-1445058-2
3-1445092-2
3-1445101-2
1-1445022-2
*Recommended PC Board thickness .062 [1.57]. Always consult customer drawing for PC Board layout dimensions.
Note: All part numbers are RoHS Compliant.
42
Catalog 82181
Revised 4-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
Soft Shell
Pin and Socket Connectors
AMP
PageHead_12_HelvCdBd
Micro
MATE-N-LOK 3 mm(Continued)
Connector System (Continued)
A
High Density
Right-Angle Header
Assemblies (Continued)
.051
[1.30]
Dual Row, Through-Hole,
with Metal Through-Hole
Hold-down
.290
[7.37]
.404
[10.25]
Micro MATE-N-LOK 3 mm Connector System
.118 [3.00] Centerline
Material and Finish
Housing — High Temperature Nylon,
Black
Flammability Rating — UL 94V-0
.351
[8.92] .469
[11.92]
Contacts—Brass
Plating A—.000100 [0.00254] min. tin
over .000050 [0.00127] min. nickel
Plating B—.000015 [0.00038] gold in
mating area, .000100 [0.00254] min. tin
in solder area, with entire contact
underplated .000050 [0.00127] min.
nickel
Plating C—.000030 [0.00076] gold in
mating area, .000100 [0.00254] min. tin
in solder area, with entire contact
underplated .000050 [0.00127] min.
nickel
.118
[3.00]
C
.085
[2.16]
.118
[3.00]
.040
[1.02] Dia. Typ.
.118
[3.00]
.170
[4.32]
.095
[2.41] Dia. 2 Plc.
Hold-downs—Phosphor Bronze,
.000100 [0.00254] min. tin over
.000050 [0.00127] min. nickel
Related Product Data
Mateable Housings:
B
Dual Row Receptacle Housing—page 24
Number of
Circuits
2
4
6
8
10
12
14
16
18
20
22
24
Recommended PC Board Layout*
Dimensions
A
B
.276
7.00
.394
10.00
.512
13.00
.630
16.00
.748
19.00
.866
22.00
.984
25.00
1.102
28.00
1.220
31.00
1.339
34.00
1.457
37.00
1.575
40.00
.169
4.30
.287
7.30
.406
10.30
.524
13.30
.642
16.30
.760
19.30
.878
22.30
.996
25.30
1.114
28.30
1.232
31.30
1.350
34.30
1.469
37.30
Header Part Numbers
Mates with
Receptacle Housing
Part Number
C
Plating A
Plating B
Plating C
—
3-794677-2
3-794678-2
3-794679-2
794617-2
.118
3.00
.236
6.00
.354
9.00
.472
12.00
.591
15.00
.709
18.00
.827
21.00
.945
24.00
1.063
27.00
1.181
30.00
1.299
33.00
3-794677-4
3-794678-4
3-794679-4
794617-4
3-794677-6
3-794678-6
3-794679-6
794617-6
3-794677-8
3-794678-8
3-794679-8
794617-8
4-794677-0
4-794678-0
4-794679-0
1-794617-0
4-794677-2
4-794678-2
4-794679-2
1-794617-2
4-794677-4
4-794678-4
4-794679-4
1-794617-4
4-794677-6
4-794678-6
4-794679-6
1-794617-6
4-794677-8
4-794678-8
4-794679-8
1-794617-8
5-794677-0
5-794678-0
5-794679-0
2-794617-0
5-794677-2
5-794678-2
5-794679-2
2-794617-2
5-794677-4
5-794678-4
5-794679-4
2-794617-4
*Recommended PC Board thickness .062 [1.57]. Always consult customer drawing for PC Board layout dimensions.
Note: All part numbers are RoHS Compliant.
43
Catalog 82181
Revised 4-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
Soft Shell
Pin and Socket Connectors
AMP
High Density
PageHead_12_HelvCdBd
Micro
MATE-N-LOK 3 mm(Continued)
Connector System (Continued)
Right-Angle Header
Assemblies (Continued)
A
.051
[1.30]
Micro MATE-N-LOK 3 mm Connector System
.118 [3.00] Centerline
Dual Row, Through-Hole,
with Plastic Boardlock
.428
[10.88]
.290
[7.37]
Material and Finish
Housing — High Temperature Nylon,
Black
Flammability Rating — UL 94V-0
.351
[8.92]
Contacts—Brass
Plating A—.000100 [0.00254] min. tin
over .000050 [0.00127] min. nickel
Plating B—.000015 [0.00038] gold in
mating area, .000100 [0.00254] min. tin
in solder area, with entire contact
underplated .000050 [0.00127] min.
nickel
Plating C—.000030 [0.00076] gold in
mating area, .000100 [0.00254] min. tin
in solder area, with entire contact
underplated .000050 [0.00127] min.
nickel
.469
[11.92]
.118
[3.00]
8 Thru 24 Position
6 Position
4 Position
2 Position
.118
[3.00]
.236
[6.00]
.118
[3.00]
C
.118
[3.00]
.040
[1.02] Dia. Typ.
.118
[3.00]
.118
[3.00]
.170
[4.32]
.170
[4.32]
.181
[4.60] Min.
.181
[4.60] Min.
Related Product Data
Mateable Housings:
.138
[3.50] Min.
Dual Row Receptacle Housing—page 24
.197
[5.00] Min.
.059 .118
[1.50] [3.00]
.256
[6.50] Min.
B
.085
[2.16]
.222
[5.65] Min.
.118
[3.00] Dia. Typ.
Recommended PC Board Layout*
Number of
Circuits
2
4
6
8
10
12
14
16
18
20
22
24
Dimensions
Header Part Numbers
Mates with
Receptacle Housing
Part Number
C
Plating A
Plating B
Plating C
—
—
3-794618-2
3-794619-2
3-794620-2
794617-2
—
.118
3.00
.236
6.00
.354
9.00
.472
12.00
.591
15.00
.709
18.00
.827
21.00
.945
24.00
1.063
27.00
1.181
30.00
1.299
33.00
3-794618-4
3-794619-4
3-794620-4
794617-4
3-794618-6
3-794619-6
3-794620-6
794617-6
3-794618-8
3-794619-8
3-794620-8
794617-8
4-794618-0
4-794619-0
4-794620-0
1-794617-0
4-794618-2
4-794619-2
4-794620-2
1-794617-2
4-794618-4
4-794619-4
4-794620-4
1-794617-4
4-794618-6
4-794619-6
4-794620-6
1-794617-6
4-794618-8
4-794619-8
4-794620-8
1-794617-8
5-794618-0
5-794619-0
5-794620-0
2-794617-0
5-794618-2
5-794619-2
5-794620-2
2-794617-2
5-794618-4
5-794619-4
5-794620-4
2-794617-4
A
B
.276
7.00
.394
10.00
.512
13.00
.630
16.00
.748
19.00
.866
22.00
.984
25.00
1.102
28.00
1.220
31.00
1.339
34.00
1.457
37.00
1.575
40.00
—
.185
4.70
.303
7.70
.421
10.70
.539
13.70
.657
16.70
.776
19.70
.894
22.70
1.012
25.70
1.130
28.70
*Recommended PC Board thickness .062 [1.57]. Always consult customer drawing for PC Board layout dimensions.
Note: All part numbers are RoHS Compliant.
44
Catalog 82181
Revised 4-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
Soft Shell
Pin and Socket Connectors
AMP
PageHead_12_HelvCdBd
Micro
MATE-N-LOK 3 mm(Continued)
Connector System (Continued)
High Density
Right-Angle Header
Assemblies (Continued)
Contacts
.404
[10.25]
Dual Row, Surface Mount,
with Metal Through-Hole
Hold-down
.290
[7.37]
.051
[1.30]
.118
[3.00]
Material and Finish
Micro MATE-N-LOK 3 mm Connector System
.118 [3.00] Centerline
.439
[11.16]
Hold-down
.615
[15.63]
Housing — High Temperature Nylon,
Black
Flammability Rating — UL 94V-0
A
Contacts—Brass
Plating A—.000100 [0.00254] min. tin
over .000050 [0.00127] min. nickel
Plating B—.000015 [0.00038] gold in
mating area, .000100 [0.00254] min. tin
in solder area, with entire contact
underplated .000050 [0.00127] min.
nickel
Plating C—.000030 [0.00076] gold in
mating area, .000100 [0.00254] min. tin
in solder area, with entire contact
underplated .000050 [0.00127] min.
nickel
C
.118
[3.00]
.025
[0.635]
.050
[1.27] Typ.
.085
[2.15]
.115
[2.92]
.057
[1.46]
.398
[10.10]
Hold-downs—Phosphor Bronze,
.000100 [0.00254] min. tin over
.000050 [0.00127] min. nickel
Circuit 1
.216
[5.48]
.222
[5.65] Min.
.095
[2.41] Dia. 2 Plc.
Related Product Data
Mateable Housings:
B
.087
[2.20] Min.
Dual Row Receptacle Housing—page 24
Number of
Circuits
2
4
6
8
10
12
14
16
18
20
22
24
Recommended PC Board Layout*
Dimensions
Header Part Numbers
Mates with
Receptacle Housing
Part Number
A
B
C
Plating A
Plating B
Plating C
.276
7.00
.394
10.00
.512
13.00
.630
16.00
.748
19.00
.866
22.00
.984
25.00
1.102
28.00
1.220
31.00
1.339
34.00
1.457
37.00
1.575
40.00
.169
4.30
.287
7.30
.406
10.30
.524
13.30
.642
16.30
.760
19.30
.878
22.30
.996
25.30
1.114
28.30
1.232
31.30
1.350
34.30
1.469
37.30
—
3-794624-2
3-794625-2
3-794626-2
794617-2
.118
3.00
.236
6.00
.354
9.00
.472
12.00
.591
15.00
.709
18.00
.827
21.00
.945
24.00
1.063
27.00
1.181
30.00
1.299
33.00
3-794624-4
3-794625-4
3-794626-4
794617-4
3-794624-6
3-794625-6
3-794626-6
794617-6
3-794624-8
3-794625-8
3-794626-8
794617-8
4-794624-0
4-794625-0
4-794626-0
1-794617-0
4-794624-2
4-794625-2
4-794626-2
1-794617-2
4-794624-4
4-794625-4
4-794626-4
1-794617-4
4-794624-6
4-794625-6
4-794626-6
1-794617-6
4-794624-8
4-794625-8
4-794626-8
1-794617-8
5-794624-0
5-794625-0
5-794626-0
2-794617-0
5-794624-2
5-794625-2
5-794626-2
2-794617-2
5-794624-4
5-794625-4
5-794626-4
2-794617-4
*Recommended PC Board thickness .062 [1.57]. Always consult customer drawing for PC Board layout dimensions.
Note: All part numbers are RoHS Compliant.
45
Catalog 82181
Revised 4-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
Soft Shell
Pin and Socket Connectors
AMP
High Density
PageHead_12_HelvCdBd
Micro
MATE-N-LOK 3 mm(Continued)
Connector System (Continued)
Right-Angle Header
Assemblies (Continued)
A
Dual Row, Surface Mount,
with Plastic Boardlock
Micro MATE-N-LOK 3 mm Connector System
.118 [3.00] Centerline
.428
[10.88]
.290
[7.37]
.051
[1.30]
Material and Finish
.439
[11.16]
Housing — High Temperature Nylon,
Black
Flammability Rating — UL 94V-0
.615
[15.63]
Contacts—Brass
Plating A—.000100 [0.00254] min. tin
over .000050 [0.00127] min. nickel
Plating B—.000015 [0.00038] gold in
mating area, .000100 [0.00254] min. tin
in solder area, with entire contact
underplated .000050 [0.00127] min.
nickel
Plating C—.000030 [0.00076] gold in
mating area, .000100 [0.00254] min. tin
in solder area, with entire contact
underplated .000050 [0.00127] min.
nickel
.118
[3.00]
6 Position
4 Position
2 Position
.118
[3.00]
.236
[6.00]
8 Thru 24 Position
C
.118
[3.00]
.118
[3.00]
.115
[2.92]
.398
[10.10]
Related Product Data
Mateable Housings:
Dual Row Receptacle Housing—page 24
.216
[5.48]
.216
[5.48]
.181
[4.60] Min.
.398
[10.10]
.181
[4.60] Min.
.059
[1.50]
.138
[3.50] Min.
.256
[6.50]
Min.
.197
[5.00] Min.
.118
[3.00] Dia. Typ.
.118
.085
[3.00] [2.15]
.222
[5.65] Min.
B
Recommended PC Board Layout*
Number of
Circuits
2
4
6
8
10
12
14
16
18
20
22
24
Dimensions
Header Part Numbers
Mates with
Receptacle Housing
Part Number
C
Plating A
Plating B
Plating C
—
—
3-794621-2
3-794622-2
3-794623-2
794617-2
—
.118
3.00
.236
6.00
.354
9.00
.472
12.00
.591
15.00
.709
18.00
.827
21.00
.945
24.00
1.063
27.00
1.181
30.00
1.299
33.00
3-794621-4
3-794622-4
3-794623-4
794617-4
3-794621-6
3-794622-6
3-794623-6
794617-6
3-794621-8
3-794622-8
3-794623-8
794617-8
4-794621-0
4-794622-0
4-794623-0
1-794617-0
4-794621-2
4-794622-2
4-794623-2
1-794617-2
4-794621-4
4-794622-4
4-794623-4
1-794617-4
4-794621-6
4-794622-6
4-794623-6
1-794617-6
4-794621-8
4-794622-8
4-794623-8
1-794617-8
5-794621-0
5-794622-0
5-794623-0
2-794617-0
5-794621-2
5-794622-2
5-794623-2
2-794617-2
5-794621-4
5-794622-4
5-794623-4
2-794617-4
A
B
.276
7.00
.394
10.00
.512
13.00
.630
16.00
.748
19.00
.866
22.00
.984
25.00
1.102
28.00
1.220
31.00
1.339
34.00
1.457
37.00
1.575
40.00
—
.185
4.70
.303
7.70
.421
10.70
.539
13.70
.657
16.70
.776
19.70
.894
22.70
1.012
25.70
1.130
28.70
*Recommended PC Board thickness .062 [1.57]. Always consult customer drawing for PC Board layout dimensions.
Note: All part numbers are RoHS Compliant.
46
Catalog 82181
Revised 4-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
Soft Shell
Pin and Socket Connectors
AMP
PageHead_12_HelvCdBd
Micro
MATE-N-LOK 3 mm(Continued)
Connector System (Continued)
High Density
Right-Angle Header
Assemblies (Continued)
.051
[1.30]
A
Hold-down
Contacts
.290
[7.37]
Dual Row, Surface Mount,
with Surface Mount Hold-down
Material and Finish
Housing — High Temperature Nylon,
Black
Flammability Rating — UL 94V-0
Contacts—Brass
Plating A—.000100 [0.00254] min. tin
over .000050 [0.00127] min. nickel
Plating B—.000015 [0.00038] gold in
mating area, .000100 [0.00254] min. tin
in solder area, with entire contact
underplated .000050 [0.00127] min.
nickel
Plating C—.000030 [0.00076] gold in
mating area, .000100 [0.00254] min. tin
in solder area, with entire contact
underplated .000050 [0.00127] min.
nickel
4
6
8
10
12
14
16
18
20
22
24
.115
[2.92]
.057
[1.46]
.398
[10.10]
Circuit 1
.216
[5.48]
.222
[5.65] Min.
.118
[3.00] Min.
.065
[1.65]
.032
[0.83]
.068
[1.72]
.135
[3.43] Typ.
.153
[3.90]
B
Recommended PC Board Layout*
Dual Row Receptacle Housing—page 24
2
.050
[1.27]
.025
[0.64]
.118
[3.00]
Related Product Data
Mateable Housings:
Number of
Circuits
C
.118
[3.00]
Hold-downs—Phosphor Bronze,
.000100 [0.00254] min. tin over
.000050 [0.00127] min. nickel
Micro MATE-N-LOK 3 mm Connector System
.118 [3.00] Centerline
.439
[11.16]
.615
[15.63]
Dimensions
Header Part Numbers
Mates with
Receptacle Housing
Part Number
A
B
C
Plating A
Plating B
Plating C
.276
7.00
.394
10.00
.512
13.00
.630
16.00
.748
19.00
.866
22.00
.984
25.00
1.102
28.00
1.220
31.00
1.339
34.00
1.457
37.00
1.575
40.00
.276
7.27
.394
10.27
.512
13.27
.630
16.27
.748
19.27
.866
22.27
.984
25.27
1.102
28.27
1.220
31.27
1.339
34.27
1.457
37.27
1.575
40.27
—
3-794627-2
3-794628-2
3-794629-2
794617-2
.118
3.00
.236
6.00
.354
9.00
.472
12.00
.591
15.00
.709
18.00
.827
21.00
.945
24.00
1.063
27.00
1.181
30.00
1.299
33.00
3-794627-4
3-794628-4
3-794629-4
794617-4
3-794627-6
3-794628-6
3-794629-6
794617-6
3-794627-8
3-794628-8
3-794629-8
794617-8
4-794627-0
4-794628-0
4-794629-0
1-794617-0
4-794627-2
4-794628-2
4-794629-2
1-794617-2
4-794627-4
4-794628-4
4-794629-4
1-794617-4
4-794627-6
4-794628-6
4-794629-6
1-794617-6
4-794627-8
4-794628-8
4-794629-8
1-794617-8
5-794627-0
5-794628-0
5-794629-0
2-794617-0
5-794627-2
5-794628-2
5-794629-2
2-794617-2
5-794627-4
5-794628-4
5-794629-4
2-794617-4
*Always consult customer drawing for PC Board layout dimensions.
Note: All part numbers are RoHS Compliant.
47
Catalog 82181
Revised 4-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
Soft Shell
Pin and Socket Connectors
AMP
Engineering Notes
48
Catalog 82181
Revised 4-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
Soft Shell
Pin and Socket Connectors
AMP
Grace Inertia Connectors (GIC), 3.5 mm Centerline
(Wire-to-Wire Connectors)
Product Facts
Grace Inertia Connectors
.137 [3.50] Centerline
wire-to-wire
connectors (3.5 mm
centerline) can handle
18 AWG wire
■ Locking mechanism helps
prevent connectors from
being disconnected during
movement or transportation
■ Four kinds of keying per
color-coded housing
■ Improved housing shape
offers easier mating
■ Complies with lead free
requirements
■ Recognized under the
Component Program
of Underwriters
Laboratories Inc.,
File No. E28476
■ Certified by
Canadian Standards
Association,
File No. E28476
High Density
■ Small
R
R
Performance
Characteristics
Voltage Rating—300 VAC
Current Rating—7 A (max.)
Centerline—3.5 mm
Applicable Wire—26 to 18 AWG
Temperature Rating—
-30˚C to 105˚C
This connector employs the
inertia locking mechanism,
which simultaneously locks
when mated to help prevent
mismating. It is widely used
for large-sized household
electric appliances, such as
refrigerators, washing
machines, or dispensers.
Depending on the working
environment, a locking
sound is difficult to confirm
during mating of a connector. However, this connector
supports secure mating
operation even in such a
working environment.
Material and Finish
Technical Documents
Housing—6/6 Nylon UL94V-0
(CTI 600 V or more)
Terminal—Pre-tin Copper alloy
Product Specification
108-5810
Application Specification
114-5306
Note: All dimensions shown are metric.
49
Catalog 82181
Revised 4-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
Soft Shell
Pin and Socket Connectors
AMP
Grace Inertia Connectors (GIC), 3.5 mm Centerline
(Wire-to-Wire Connectors) (Continued)
High Density
Contacts
Material and Finish
Pre-tinned Copper Alloy
1.2
PM A
1.9
Grace Inertia Connectors
.137 [3.50] Centerline
PM A
Tab Contact (For Cap Housing)
2.8
Receptacle Contact (For Plug Housing)
13.4
16.5
0.5 MAX
CUT OFF TAB
6
0.5 MAX
CUT OFF TAB
0.5
2.04
2.04
2.3
Wire Range
AWG
26-22
22-18
Insulation Dia.
mm
mm2
0.13-0.34
0.3-0.9
1.3-2.0
1.5-2.7
Contact Part Number
Receptacle
1612334-1
1565079-1
Tool Part Number
Tab
1612335-1
1565080-1
Terminator/Applicator
**
**
CERTI-CRIMP Hand Tool
——
1596277-1
*Cut the contact carrier strip when using a hand tool.
** Contact the Tooling Assistance Center (TAC) at 1-800-722-1111 for Terminator or Applicator Part Numbers.
Double Lock Plates
Material
6/6 Nylon glass filled (UL94V-0)
2 Position
3 Position
tyco
13.25
2.95
3.5
7
9.75
2.95
3.5
tyco
A
A
3.7
(8)
3.7
4.31
4.31
8.03
P/N 1565089-1
*Two four-positions are used.
P/N 1565090-1
*Two six-positions are used.
Note: All dimensions shown are metric.
Note: All part numbers are RoHS Compliant.
50
Catalog 82181
Revised 4-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
Soft Shell
Pin and Socket Connectors
AMP
Grace Inertia Connectors (GIC), 3.5 mm Centerline
(Wire-to-Wire Connectors) (Continued)
2 Position
High Density
Material
6/6 Nylon, UL94V-0 (CTI 600 V or more)
Plug Housing (For Receptacles)
Cap Housing (For Tabs)
26.4
19.4
14
9.05
9.1
7.75
2
1
7.75
1
tyco
2
Grace Inertia Connectors
.137 [3.50] Centerline
CIRCUIT NO.
7.85
CAVITY MARK
R2
3.5
R1
3.5
R1
A
9.3
6.45
R0
.9
R1
R1
R1
7.4
9.55
A
Part Number
Related Product Data
Receptacle and Tab Contacts—page 50
Double Lock Plate—page 50
Color
Keying
Natural
Red
Blue
Yellow
A
B
C
D
Plug Housing
1565081-1
1-1565081-2
2-1565081-3
3-1565081-4
Cap Housing
1565085-1
1-1565085-2
2-1565085-3
3-1565085-4
3 Position
Material
6/6 Nylon, UL94V-0 (CTI 600 V or more)
Plug Housing (For Receptacles)
Cap Housing (For Tabs)
26.4
12.6
2
CIRCUIT NO.
tyco
2
11.25
1
3
12.55
11.25
3
TRADE MARK
1
7
11.35
R1
3.5
CAVITY MARK
9.3
6.45
R0
R1
R1
.9
R1
7.4
9.55
A
3.5
7
Part Number
Note: All dimensions shown are metric.
Color
Keying
Natural
Red
Blue
Yellow
A
B
C
D
Plug Housing
1565082-1
1-1565082-2
2-1565082-3
3-1565082-4
Cap Housing
1565086-1
1-1565086-2
2-1565086-3
3-1565086-4
Note: All part numbers are RoHS Compliant.
51
Catalog 82181
Revised 4-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
Soft Shell
Pin and Socket Connectors
AMP
Grace Inertia Connectors (GIC), 3.5 mm Centerline
(Wire-to-Wire Connectors) (Continued)
High Density
4 Position
Plug Housing (For Receptacles)
Cap Housing (For Tabs)
26.4
9.05
7.75
9.1
1
tyco
2
7.75
19.4
Grace Inertia Connectors
.137 [3.50] Centerline
7.85
R1
3.5
R0
R1
R1
13.95
R1
.9
4.8
14.2
A
11.1
4.8
12.05
A
3.5
Part Number
Material
6/6 Nylon, UL94V-0 (CTI 600 V or more)
Related Product Data
Receptacle and Tab Contacts—page 50
Double Lock Plate—page 50
Color
Keying
Natural
Red
Blue
Yellow
A
B
C
D
Plug Housing
1565083-1
1-1565083-2
2-1565083-3
3-1565083-4
Cap Housing
1565087-1
1-1565087-2
2-1565087-3
3-1565087-4
6 Position
Plug Housing (For Receptacles)
Cap Housing (For Tabs)
26.4
19.4
26.4
19.4
CIRCUIT NO.
12.55
11.25
12.6
2
AMP
2
11.25
3
3
1
1
7
11.35
R2
CAVITY MARK
R1
3.5
A
13.95
R1
.9
4.8
11.1
R1
R1
14.2
12.05
4.8
A
R0
3.5
7
Material
6/6 Nylon, UL94V-0 (CTI 600 V or more)
Note: All dimensions shown are metric.
Part Number
Color
Keying
Natural
Red
Blue
Yellow
A
B
C
D
Plug Housing
1565084-1
1-1565084-2
2-1565084-3
3-1565084-4
Cap Housing
1565088-1
1-1565088-2
2-1565088-3
3-1565088-4
Note: All part numbers are RoHS Compliant.
52
Catalog 82181
Revised 4-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
Soft Shell
Pin and Socket Connectors
AMP
.062 [1.57] Commercial Pin and Socket Connectors
Product Facts
Cavity identification
■
Low contact-mating force
■
Dual locking lances
■
Detent and positive locking
■
Contacts available in brass
and phosphor bronze with
tin and gold plating
■
Panel mount and freehanging styles
■
“F” crimp contacts
■
Applicator and hand tool
available
■
Economical commercialgrade connectors
■
Compatible with high-speed
application machinery and
most other manufacturers’
soft shells
■
Wire range 30 to 18 AWG
[0.05 to 0.9 mm2]
■
Accepts wires with insulation diameters as large as
.110 [2.79]
■
Housings available in 1 to 9
positions
■
.062 plug and receptacle
housings accept pin or
socket contacts. The preferred convention is to use
socket contacts with receptacle housings
■
Not for interrupting current
■
Recognized under the
Component Program of
Underwriters
Laboratories Inc.,
File No. E28476
Certified by
Canadian Standards
Association,
File No. LR 7189
Technical Documents
The .062 Commercial Pin and Socket
Connectors performance characteristics
found on pages 53-54 are based on
free-hanging and panel mount
connectors, loaded with contacts
crimped on stranded wire.
Product Specification
108-1037 .062 Commercial Pin and
Socket Connectors
Application Specification
114-1013 .062 Commercial Pin and
Socket Connectors
Durability—10 mating cycles
Dielectric Withstanding Voltage—
1.0 kVAC
Insulation Resistance—1000
megohms min. initial
Voltage Rating—250 V AC or DC
R
■
Performance Characteristics
.062 [1.57] Commercial Pin and Socket Connectors
.145 [3.68] Centerline
Polarized
■
High Density
■
Connector Mating—2.5 lb. [11.1 N]
max. per contact
Connector Unmating—0.3 lb. [1.3 N]
min. per contact
R
Contact Insertion Force—
4.0 lb. [17.8 N] max. per contact
Contact Retention—
7 lb. [31.1 N] min.
15 lb. [66.6 N] min. for contacts
770983-1 and 794380-1
53
Catalog 82181
Revised 4-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
Soft Shell
Pin and Socket Connectors
AMP
.062 [1.57] Commercial Pin and Socket Connectors (Continued)
Performance Characteristics
Current Rating Verification for 30°C Maximum Temperature Rise 100% Energized
(Continued)
.062 [1.57] Commercial Pin and Socket Connectors
.145 [3.68] Centerline
High Density
Maximum Current—Maximum current rating of .062 Commercial Pin and
Socket connectors is limited by the
maximum operating temperature of the
housings which is 105°C including the
temperature rise of the contacts which is
a maximum of 30°C. There are several
variables which have a direct effect on
this maximum current-carrying capability for a given connector and must be
considered for each application. These
variables are:
Wire Size—Larger wire will carry
more current since it has less internal
resistance to current flow and thus generates less heat. Longer wire lengths
also enhance current-carrying capabilities since the wire conducts heat away
from the connector.
Wire-to-Wire
.062 Commercial Pin and Socket Connectors Calculated Current Table
Wire Gauge
Number of
Circuits
18
7.00
7.00
6.00
6.00
6.00
5.00
2
3
4
4
6
9
20
6.00
6.00
6.00
5.00
5.00
4.00
22
5.00
5.00
5.00
4.00
4.00
4.00
24
4.00
4.00
4.00
3.00
3.00
3.00
Values are based on initial Temperature Rise versus Current Testing and are intended to be a guide in the selection of
a connector family. All applications should be tested by the end user. The values listed are per circuit for fully loaded
housings being 100% energized. Note: All combinations were not tested, and this chart contains interpolated and
extrapolated values.
Connector Size—In general, the more
circuits in a connector, the less current
can be carried.
Ambient Temperature—The higher
the ambient temperature, the less current can be carried in any given connector.
Related Product Data
Product Specification —
108-1037
Application Specification —
114-1013
Minimum Wire Lengths for T-Rise vs. Current Testing
AWG
30
28
26
24
20
Min. Length (in.)
2.6
3.2
4.1
5.1
7.8
AWG
18
16
14
12
10
Min. Length (in.)
9.4
11.3
13.7
16.4
19.3
Note: If wire lengths used are less than those listed above, the current-carrying ability of the system will be reduced due to less heat being conducted
away from the connector. The customer should fully test all applications.
Termination Resistance/Contact Crimp Tensile Force
Wire Size
AWG
mm2
24
22
20
18
0.2
0.3–0.4
0.5–0.6
0.8–0.9
Termination
Resistance
Test
Resistance
Current
Milliohms
(Amps)
(Max. Init.)
1.5
3.0
4.5
6.0
3.50
3.50
3.00
3.00
Contact
Crimp
Tensile Force
Force (Min.)
lbs.
N
10
44.5
10
44.5
13
57.8
14
62.3
Note: This is the total resistance between wire crimps of a mated pin
and socket.
54
Catalog 82181
Revised 4-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
Soft Shell
Pin and Socket Connectors
AMP
.062 [1.57] Commercial Pin and Socket Connectors (Continued)
Contacts
Pin Diameter .062 [1.57]
Material
.665
[16.89]
Pin
Related Product Data
Wire Size
AWG
mm2
Ins. Dia.
Socket
Material
& Finish
Brass
Pre-tin
.060
Brass,
30-24 0.05-0.2 1.52
Max. Select Gold1
Phos. Brz.,
Pre-tin
Brass
Pre-tin
24-18
0.2-0.9 .050-.110
1.27-2.79
Phos. Brz.,
Pre-tin
Brass,
Select Gold1
Phos. Brz.,
Select Gold1
.062 [1.57] Commercial Pin and Socket Connectors
.145 [3.68] Centerline
Performance Characteristics—
pages 53-54
Housings—pages 56-57
Panel Cutouts—page 57
Technical Documents—pages 53
and 205-206
Application Tooling—pages 207-210
Product Specification—
108-1037-1
.660
[16.76]
High Density
.008 [0.20] Stock Thickness
Pin and socket contacts can be used in
either plug or receptacle housings.
It is preferred to use socket contacts in
receptacle housings.
Contact Part Numbers
HDM
Hand Tool
Pin
Socket
Applicator
Part No.
Strip Form Loose Pieces Strip Form Loose Pieces Part No.
640391-1 794018-1 640392-1 794019-1
—
—
794046-12
—
466686-13
1
1
640391-5
—
640392-5
—
466686-23 90870-1
466686-33
—
—
640392-2
—
350629-1
794017-1
350628-1 794016-1
794380-14
—
794103-12
770983-14
—
350629-8
—
350628-2
—
350629-51
—
350628-51
—
—
—
350628-61
—
687996-13
687996-23 90869-1
687996-33
1Select
Gold—.000030 [.000762] min. in mating area over .000050 [.00127] nickel.
Socket for Overmolding.
3HDM Applicator part number ending in -1 is used on AMPOMATOR CLS Machine with T or G Terminators, -2 is
used on AMP-O-LECTRIC Model K Machine, -3 is used on AMP-O-LECTRIC Model G Machine. See pages 207210 for further information.
4Contact Retention 15 lbs. [66.6 N] min.
2Lanceless
Note: Phosphor bronze contacts should be used in high-temperature/humidity cycling applications.
Note: All part numbers are RoHS Compliant.
Contact Insertion Tool
(for Pins and Sockets)
Part No. 91002-1
IS 408-7347
Contact Extraction Tool
Part No. 318831-1
IS 408-4370
55
Catalog 82181
Revised 4-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
Soft Shell
Pin and Socket Connectors
AMP
.062 [1.57] Commercial Pin and Socket Connectors (Continued)
Housings
1 Circuit
Free-Hanging or Panel Mount
.203
[5.16] Min. Dia.
.145 [3.68] Centerline spacing
High Density
Material
Housing —Nylon, natural color
Flammability Rating —UL94V-2
.200
[5.08] Max. Dia.
Related Product Data
C
.300
[7.62] Dia.
Receptacle
C
Plug
Contacts — page 55
.062 [1.57] Commercial Pin and Socket Connectors
.145 [3.68] Centerline
Product Specification —
108-1037
2, 3, and 4 Circuit, In-Line
Panel-Mount
Flange
.145
[3.68] Typ.
.145
[3.68] Typ.
Panel-Mount
Flange
A
A
B
C
B
Receptacle
Plug
Dimensions
No. of
Circuits
Receptacle Part Numbers
Receptacle
Plug
A
B
C
A
B
C
1
—
—
—
—
2
.340
8.64
.490
12.45
.635
16.13
.345
8.76
.345
8.76
.490
12.45
.199
5.05
.199
5.05
.199
5.05
.345
8.76
.495
12.57
.495
12.57
.785
19.94
.820
20.83
.785
19.94
.785
19.94
.878
22.30
.785
19.94
.790
20.07
.440
11.18
.590
14.99
.733
18.62
.445
11.30
.445
11.30
.590
14.99
.300
7.62
.300
7.62
.300
7.62
.445
11.30
.600
15.24
.600
15.24
.750
19.05
.780
19.81
.750
19.05
.750
19.05
.868
22.04
.750
19.05
.750
19.05
3
4
(In-Line)
4
(Matrix)
6
9
C
Plug Part Numbers
Panel
Mount
FreeHanging
Panel
Mount
FreeHanging
—
770277-1
—
770278-1
770343-1
770342-1
770419-11
770341-1
770340-1
770326-1
770333-1
770332-1
770331-1
770335-1
770274-1
770334-1
770275-1
770441-1
770442-1
770443-1
770433-1
770354-1
770356-1
770353-1
770355-1
770427-1
770429-1
770426-1
770428-1
1
Positive Lock
Note: All part numbers are RoHS Compliant.
56
Catalog 82181
Revised 4-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
Soft Shell
Pin and Socket Connectors
AMP
.062 [1.57] Commercial Pin and Socket Connectors (Continued)
Housings
4, 6, and 9 Circuit, Matrix
Free-Hanging or Panel Mount
.145 [3.68] Centerline spacing
.145
[3.68] Typ.
Housing — Nylon, natural color
Flammability Rating — UL94V-2
Panel-Mount
Flange
.145
[3.68]
Related Product Data
High Density
.145
[3.68] Typ.
Material
Panel-Mount
Flange
.145
[3.68]
A
A
Contacts — page 55
C
Recommended
Panel Cutouts
Plug
Maximum panel thickness is
.060 [1.52].
2
3
Related Product Data
Product Specification —
108-1037
Panel Cutout Dimensions
Receptacle
No. of
Circuits
A
B
C
B
Receptacle
.062 [1.57] Commercial Pin and Socket Connectors
.145 [3.68] Centerline
B
4
(In-Line)
4
(Matrix)
6
9
A
.265
6.73
.265
6.73
.260
6.60
.400
10.16
.505
12.83
.552
14.02
B
.505
12.83
.650
16.51
.785
19.94
.506
12.85
.552
14.02
.650
16.51
A
.318
8.08
.318
8.08
.312
7.92
.465
11.81
.607
15.42
.615
15.62
Plug
B
.609
15.47
.754
19.15
.865
21.97
.615
15.62
.615
15.62
.752
19.10
Note: The panel should be punched so that the housing enters in the same
direction as the punch.
Note: All part numbers are RoHS Compliant.
57
Catalog 82181
Revised 4-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
Soft Shell
Pin and Socket Connectors
AMP
Engineering Notes
58
Catalog 82181
Revised 4-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
Soft Shell
Pin and Socket Connectors
AMP
Power Double Lock (PDL) Connectors (Wire-to-Board and Wire-to-Wire)
Product Facts
■ Power
R
Power Double Lock
Connectors are compact
connectors designed for use
in power circuit applications
and are ideally suited for
wiring in refrigerators, air
conditioners, washing
machines, gas equipment,
copying machines and
automatic vending
machines. These connectors can be used alone by
inserting wire-terminated
crimp snap-in contacts into
the housing. However, to
achieve more positive contact mounting, plug and cap
housings can be equipped
with a double lock plate
that helps to completely
insert contacts. There are
three contact centerline
spacings available: 3.96 mm,
6.5 mm and 7.92 mm. Of
these, the 7.92 mm centerline contact arrangement is
for 2-position board-mounted
headers. The mating wiremounted plug connector
uses the second circuit of
the 3-position 3.96 mm
centerline housing with no
contact loaded. Available
with the 3.96 mm centerline
contact arrangement are
wire-mounted plug housings
and the mating wire-mounted
cap housings (for freehanging and panel mounted
applications) and boardmounted tab headers.
The 6.5 mm centerline contact arrangement is used in
wire-mounted plug housings and the mating boardmounted tab headers. The
plug housings are loaded
with receptacle contacts
and the cap housings with
tab contacts. The tab headers for board mounting are
preloaded with solder-dipping tab contacts with tail.
Contacts accept two wire
size ranges: 28-22 AWG
(with insulation outer diameter of 1.3 to 2.0 mm) and
20-18 AWG (with insulation
outer diameter of 2.0 to
3.1 mm).
The tab header for board
mounting has a locking
mechanism where it is compatible with resin coating
that is applied to the board
for waterproof.
It is designed to work with
the plug locking function.
The solder tail section of tab
contact has kink feature.
Interacting with the mounting boss with kink feature,
the solder tab secures the
header on the board firmly
during soldering.
Power Double Lock (PDL) Connectors
.156 [3.96], .256 [6.50], .312 [7.92] and .512 [13.00] Centerlines
R
High Density
circuit connectors of
compact design
■ Uses double lock plate on
the wire side that helps prevent partial mating of contacts
■ Double lock plate compatible with high-count positions
of more than 3 rows
■ Tab and receptacle contacts
resist scooping of contacts
at mating / unmating
■ Locking of plug to cap housings and plug to boardmounted headers made by
the semi-inner locking system that helps preclude the
possibility of disengagement
by external pressure
■ Both wire-to-wire and wireto-board applications available from the same Series
lineup
■ Board-mounted header compatible with resin coating,
causing no hindrance with
the plug locking function
■ Design complies with a
range of safety standards
■ The housing lance design
provides no lance on contacts and helps prevent
entanglement of contacts
with one another
■ Fully polarized
■ The following contact centerline by row centerline
arrangements available:
• For wire-to-wire
application:
3.96 mm x 4.6 mm
6.5 mm x 6.5 mm
• For wire-to-board
application:
3.96 mm x 4.6 mm
7.92 mm x 4.6 mm
6.5 mm x 6.5 mm
■ Recognized under the
Component Program of
Underwriters
Laboratories Inc.,
File No. E28476
■ Certified by Canadian
Standards Association,
File No. LR7189
■ VDE Approved,
File No. B 04 11
39175010
The double lock plate is
compatible with high-count
positions of more than
3 rows. Also, the housing
lance design of this connector, featuring no lance on
contacts, makes handling
of the connector very easy,
as there is minimal entanglement of contacts with
one another.
Performance Characteristics
Voltage Rating—300 VAC (for
3.96 mm wire-to-wire, 6.5 mm wire-toboard and 7.92 mm wire-to-board
applications)
50 VAC (for 3.96 mm wire-to-board
application)
Current Rating—14A max. (Based on
initial t-rise vs. current testing using 16
AWG wire in a 2-position connector
Fine Rating—1 mV, 1∝A min.
Operating Temperature—
-30° ~ +105˚C
Technical Documents
Product Specifications
108-5410
108-5439 (SMT)
Application Specification
114-5175
Instruction Sheet
411-5638
59
Catalog 82181
Revised 4-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
Soft Shell
Pin and Socket Connectors
AMP
Power Double Lock (PDL) Connectors (Wire-to-Board and Wire-to-Wire) (Continued)
Quick Reference Chart for Mating Part Numbers
Quick Reference Chart
Mating Connectors (Wire and PC Board Mount Side)
Plug Connector (Wire Side)
Housing
High Density
No. of
Pos.
Part No.
Part No. of
Applicable
Double Lock Plate
No. of
Pos.
316770-1x1
1
2
Power Double Lock (PDL) Connectors
.156 [3.96], .256 [6.50], .312 [7.92] and .512 [13.00] Centerlines
■ 3.96 mm and 7.92 mm Centerline
1
316768-첸
2
177898-첸
177918-1x1
3
177899-첸
177919-1x1
4 (1 Row)
316501-첸
177920-1x1
2
4
4 (2 Rows)
177900-첸
177918-1x2
4
6
177901-첸
177919-1x2
6
8
177902-첸
177920-1x2
8
9
10
177903-첸
177904-첸
177919-1x3
177921-1x2
9
10
12
177905-첸
177920-1x3
12
316061-1x1
2
■ 6.5 mm and 13.0 mm Centerline
2
1939344-1
3
3
179938-첸
316062-1x1
3
—
—
—
2
4 (1 Row)
179939-첸
316063-1x1
4 (2 Rows)
179861-첸
316061-1x2
6
179862-첸
316062-1x2
6
12
917354-첸
353891-1x2
12
4
Part No. of
Cap Housing and
Tab Header
Part No. of
Applicable
Double Lock Plate
316769-첸 (Free-Hanging)
316770-1x1
179463-첸 (Free-Hanging)
177918-1x1
177906-첸 (Panel Mount)
179838-첸 (PC Board Mount)
—
179464-첸 (Free-Hanging)
177919-1x1
177907-첸 (Panel Mount)
179839-첸 (PC Board Mount)
—
179844-첸 (PC Board Mount 7.92 mm Centerline)
316502-첸 (Panel Mount)
177920-1x1
179465-첸 (Free-Hanging)
177918-1x2
177908-첸 (Panel Mount)
179840-첸 (PC Board Mount)
—
179466-첸 (Free-Hanging)
177919-1x2
177909-첸 (Panel Mount)
179841-첸 (PC Board Mount)
—
179467-첸 (Free-Hanging)
177920-1x2
917845-첸 (PC Board Mount)
177911-첸 (Panel Mount)
177919-1x3
177912-첸 (Panel Mount)
177921-1x2
177913-첸 (Panel Mount)
177920-1x3
179843-첸 (PC Board Mount)
—
1903720-1 (Free-Hanging)
177920-1x3
1939343-1 (Panel Mount)
179846-첸 (PC Board Mount)
179944-첸 (PC Board Mount/SMT)
917745-첸 (PC Board Mount 13 mm Centerline)
9139343-1-첸 (Panel Mount)
179847-첸 (PC Board Mount)
179945-첸 (PC Board Mount/SMT)
179848-첸 (PC Board Mount)
1903486-1 (Panel Mount)
179849-첸 (PC Board Mount)
1903487-1 (Panel Mount)
917353-첸 (PC Board Mount)
—
—
—
—
—
—
*For details on 6.5 mm and 13.0 mm Centerline products, contact Technical Support
Note: All part numbers are RoHS Compliant.
Note: All dimensions shown are metric.
60
Catalog 82181
Revised 4-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
Soft Shell
Pin and Socket Connectors
AMP
Power Double Lock (PDL) Connectors (Wire-to-Board and Wire-to-Wire) (Continued)
Contacts and
Product Composition
Contacts
Material and Finish
Pre-tinned copper alloy
High Density
Receptacle for Plug Housing,
Tab for Cap Housing
Receptacle
Ins. Dia.
(Note)
AWG
mm2
26-22
0.14~0.34
1.30~2.00
20-16
0.51~1.38
2.00~3.10
Contact Part No.
Receptacle
Strip
Form
177914-1
177914-2*
177915-1
177915-2*
Loose
Piece
179592-1
179592-2*
179593-1
179593-2*
Tab
Applicator
Part No.
CERTI-CRIMP II
Hand Tool
Part No.
Strip
Form
Loose
Piece
177916-1
179594-1
680283-X
91567-1
177917-1
179595-1
680286-X
91569-1
Power Double Lock (PDL) Connectors
.156 [3.96], .256 [6.50], .312 [7.92] and .512 [13.00] Centerlines
Wire Range
Tab
Note: Maximum diameter is 2.8 mm when Double Lock Plate is used.
*Part Number suffix -2 represents high contact pressure type.
Extraction Tool P/N : 234912-1 (For receptacle contact)
234914-1 (For tab contact)
Note: Contact the Tooling Assistance Center (TAC) at 1-800-722-1111 for Applicator Part Number.
Positive mounting achieved
with Double Lock mechanism.
Product Composition
Contact is partially-mounted.
Double Lock Plate is set.
Power Double Lock Connector is composed
of the components listed below:
■ Tab and receptacle contacts
■ Free-hanging plug housing
■ Free-hanging cap housing
■ Panel mount cap housing
■ PC Board-mount tab header
■ Double Lock Plate
Contact is fully pushed in as
Double Lock Plate is pressed.
Note: All dimensions shown are metric.
Note: All part numbers are RoHS Compliant.
61
Catalog 82181
Revised 4-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
Soft Shell
Pin and Socket Connectors
AMP
Power Double Lock (PDL) Connectors (Wire-to-Board and Wire-to-Wire) (Continued)
3.96 mm Centerline Free-Hanging Plug Housing
1 Circuit
Wire-to-Wire
Material—UL94V-0, 6/6 Nylon
High Density
Part Number
316768-1 (Natural)
316768-2 (Red)
316768-4 (Yellow)
316768-6 (Blue)
316768-9 (Black)
Related Product Data
Receptacle Contacts—page 61
Mating Cap Housings
(Free-Hanging)—pages 65-66
Double Lock Plate—page 71
Section X-X
Power Double Lock (PDL) Connectors
.156 [3.96] Centerlines
2 Circuits
Wire-to-Board and Wire-to-Wire
Material—UL94V-0, 6/6 Nylon
Part Number
177898-1 (Natural)
177898-2 (Red)
177898-4 (Yellow)
177898-6 (Blue)
177898-9 (Black)
Related Product Data
Receptacle Contacts—page 61
Mating Cap Housings
(Free-Hanging)—pages 65-66
(Panel Mount)—pages 67-70
Double Lock Plate—page 71
Mating Tab Headers—
pages 72-74
Lock Type II—3-177898-1 (Natural)
Section X-X
3 Circuits
Wire-to-Board and Wire-to-Wire
Material—UL94V-0, 6/6 Nylon
Part Number
177899-1 (Natural)
177899-2 (Red)
177899-4 (Yellow)
177899-6 (Blue)
177899-9 (Black)
Related Product Data
Receptacle Contacts—page 61
Mating Cap Housings
(Free-Hanging)—pages 65-66
(Panel Mount)—pages 67-70
Double Lock Plate—page 71
Mating Tab Headers—
pages 72-74 and
(2 circuit, 7.92 mm
centerline)—page 74
Lock Type II—3-177899-1 (Natural)
Section X-X
4 Circuits (1 Row)
Wire-to-Wire
Material—UL94V-0, 6/6 Nylon
Part Number
316501-1 (Natural)
316501-4 (Yellow)
316501-6 (Blue)
Related Product Data
Receptacle Contacts—page 61
Mating Cap Housings
(Panel Mount)—pages 67-70
Double Lock Plate—page 71
Lock Type II—3-316501-1 (Natural)
Note: All dimensions shown are metric.
Note: All part numbers are RoHS Compliant.
Section X-X
62
Catalog 82181
Revised 4-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
Soft Shell
Pin and Socket Connectors
AMP
Power Double Lock (PDL) Connectors (Wire-to-Board and Wire-to-Wire) (Continued)
3.96 mm Centerline Free-Hanging Plug Housing
4 Circuits (2 Rows)
Wire-to-Board and Wire-to-Wire
Part Number
177900-1 (Natural)
177900-4 (Yellow)
177900-6 (Blue)
High Density
Related Product Data
Receptacle Contacts—page 61
Mating Cap Housings
(Free-Hanging)—pages 65-66
(Panel Mount)—pages 67-70
Double Lock Plate—page 71
Mating Tab Headers—
pages 72-74
Material
UL94V-0, 6/6 Nylon
Lock Type II
3-177900-1 (Natural)
Power Double Lock (PDL) Connectors
.156 [3.96] Centerlines
Section X-X
6 Circuits
Wire-to-Board and Wire-to-Wire
Related Product Data
Receptacle Contacts—page 61
Mating Cap Housings
(Free-Hanging)—pages 65-66
(Panel Mount)—pages 67-70
Double Lock Plate—page 71
Mating Tab Headers—
pages 72-74
Material
UL94V-0, 6/6 Nylon
Part Number
177901-1 (Natural)
177901-4 (Yellow)
177901-6 (Blue)
Lock Type II
3-177901-1 (Natural)
Section X-X
8 Circuits
Wire-to-Board and Wire-to-Wire
Related Product Data
Receptacle Contacts—page 61
Mating Cap Housings
(Free-Hanging)—pages 65-66
Double Lock Plate—page 71
Mating Tab Headers—pages 72-74
Material
UL94V-0, 6/6 Nylon
Part Number
177902-1 (Natural)
177902-4 (Yellow)
177902-6 (Blue)
Lock Type II
3-177902-1 (Natural)
Section X-X
Note: All dimensions shown are metric.
Note: All part numbers are RoHS Compliant.
63
Catalog 82181
Revised 4-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
Soft Shell
Pin and Socket Connectors
AMP
Power Double Lock (PDL) Connectors (Wire-to-Board and Wire-to-Wire) (Continued)
3.96 mm Centerline Free-Hanging Plug Housing
9 Circuits
Wire-to-Wire
Related Product Data
Receptacle Contacts—page 61
Mating Cap Housings
(Panel Mount)—pages 67-70
Double Lock Plate—page 71
High Density
Material
UL94V-0, 6/6 Nylon
Part Number
177903-1 (Natural)
177903-4 (Yellow)
177903-6 (Blue)
Power Double Lock (PDL) Connectors
.156 [3.96] Centerlines
Lock Type II
3-177903-1 (Natural)
Section X-X
10 Circuits
Wire-to-Wire
Related Product Data
Receptacle Contacts—page 61
Mating Cap Housings
(Panel Mount)—pages 67-70
Double Lock Plate—page 71
Material
UL94V-0, 6/6 Nylon
Part Number
177904-1 (Natural)
177904-4 (Yellow)
177904-6 (Blue)
Section X-X
12 Circuits
Wire-to-Board and Wire-to-Wire
Related Product Data
Receptacle Contacts—page 61
Mating Cap Housings
(Panel Mount)—pages 67-70
Double Lock Plate—page 71
Mating Tab Headers—pages 72-74
Material
UL94V-0, 6/6 Nylon
Part Number
177905-1 (Natural)
177905-4 (Yellow)
177905-6 (Blue)
Note: All dimensions shown are metric.
Note: All part numbers are RoHS Compliant.
Section X-X
64
Catalog 82181
Revised 4-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
Soft Shell
Pin and Socket Connectors
AMP
Power Double Lock (PDL) Connectors (Wire-to-Wire)
3.96 mm Centerline Free-Hanging Cap Housing
1 Circuit
Wire-to-Wire
Part Number
316769-1 (Natural)
316769-2 (Red)
316769-4 (Yellow)
316769-6 (Blue)
316769-9 (Black)
High Density
Related Product Data
Tab Contacts—page 61
Mating Plug Housings
(Free-Hanging)—pages 62-64
Double Lock Plate—page 71
Material
UL94V-0, 6/6 Nylon
Power Double Lock (PDL) Connectors
.156 [3.96] Centerlines
Section X-X
2 Circuits
Wire-to-Wire
Related Product Data
Tab Contacts—page 61
Mating Plug Housings
(Free-Hanging)—pages 62-64
Double Lock Plate—page 71
Material
UL94V-0, 6/6 Nylon
Part Number
179463-1 (Natural)
179463-2 (Red)
179463-4 (Yellow)
179463-6 (Blue)
179463-9 (Black)
Section X-X
3 Circuits
Wire-to-Wire
Related Product Data
Tab Contacts—page 61
Mating Plug Housings
(Free-Hanging)—pages 62-64
Double Lock Plate—page 71
Material
UL94V-0, 6/6 Nylon
Part Number
179464-1 (Natural)
179464-2 (Red)
179464-4 (Yellow)
179464-6 (Blue)
179464-9 (Black)
Note: All dimensions shown are metric.
Section X-X
Note: All part numbers are RoHS Compliant.
65
Catalog 82181
Revised 4-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
Soft Shell
Pin and Socket Connectors
AMP
Power Double Lock (PDL) Connectors (Wire-to-Wire) (Continued)
3.96 mm Centerline Free-Hanging Cap Housing
4 Circuits (2 Rows)
Wire-to-Wire
Related Product Data
Tab Contacts—page 61
Mating Plug Housings
(Free-Hanging)—pages 62-64
Double Lock Plate—page 71
High Density
Material
UL94V-0, 6/6 Nylon
Part Number
179465-1 (Natural)
179465-4 (Yellow)
179465-6 (Blue)
Section X-X
Power Double Lock (PDL) Connectors
.156 [3.96] Centerlines
6 Circuits
Wire-to-Wire
Related Product Data
Tab Contacts—page 61
Mating Plug Housings
(Free-Hanging)—pages 62-64
Double Lock Plate—page 71
Material
UL94V-0, 6/6 Nylon
Part Number
179466-1 (Natural)
179466-4 (Yellow)
179466-6 (Blue)
Section X-X
8 Circuits
Wire-to-Wire
Related Product Data
Tab Contacts—page 61
Mating Plug Housings
(Free-Hanging)—pages 62-64
Double Lock Plate—page 71
Material
UL94V-0, 6/6 Nylon
Part Number
179467-1 (Natural)
179467-4 (Yellow)
179467-6 (Blue)
Section X-X
12 Circuits
26.1
Circuit #
Wire-to-Board
Related Product Data
Tab Contacts—page 61
Mating Plug Housings
(Free-Hanging)—pages 62-64
Double Lock Plate—page 71
Material
UL94V-0, 6/6 Nylon
Part Number
1903720-1 (Natural)
17.86
12
17.8 +0.15
-0
4.6
Centerline
Note: All dimensions shown are metric.
3.96 Centerline
Note: All part numbers are RoHS Compliant.
Section X-X
66
Catalog 82181
Revised 4-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
Soft Shell
Pin and Socket Connectors
AMP
Power Double Lock (PDL) Connectors (Wire-to-Wire) (Continued)
3.96 mm Centerline Panel Mount Cap Housing
2 Circuits
Wire-to-Wire
Material—UL94V-0, 6/6 Nylon
High Density
Part Number
177906-1 (Natural)
177906-2 (Red)
177906-4 (Yellow)
177906-6 (Blue)
177906-9 (Black)
Panel Cutout
(Applicable Board Thickness: 0.8~2.0 mm)
Panel Mounting Direction
Power Double Lock (PDL) Connectors
.156 [3.96] Centerlines
Related Product Data
Tab Contacts—page 61
Mating Plug Housings
(Free-Hanging)—pages 62-64
Double Lock Plate—page 71
Section X-X
3 Circuits
Wire-to-Wire
Material—UL94V-0, 6/6 Nylon
Part Number
177907-1 (Natural)
177907-2 (Red)
177907-4 (Yellow)
177907-6 (Blue)
177907-9 (Black)
Panel Cutout
(Applicable Board Thickness: 0.8~2.0 mm)
Panel Mounting Direction
Related Product Data
Tab Contacts—page 61
Mating Plug Housings
(Free-Hanging)—pages 62-64
Double Lock Plate—page 71
Section X-X
4 Circuits (1 Row)
Wire-to-Wire
Material—UL94V-0, 6/6 Nylon
Part Number
316502-1 (Natural)
316502-4 (Yellow)
316502-6 (Blue)
Related Product Data
Tab Contacts—page 61
Mating Plug Housings
(Free-Hanging)—pages 62-64
Double Lock Plate—page 71
Panel Cutout
(Applicable Board Thickness: 0.8~2.0 mm)
Panel Mounting Direction
Note: All dimensions shown are metric.
Note: All part numbers are RoHS Compliant.
Section X-X
67
Catalog 82181
Revised 4-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
Soft Shell
Pin and Socket Connectors
AMP
Power Double Lock (PDL) Connectors (Wire-to-Wire) (Continued)
3.96 mm Centerline Panel Mount Cap Housing
4 Circuits (2 Rows)
Wire-to-Wire
High Density
Material
UL94V-0, 6/6 Nylon
Part Number
177908-1 (Natural)
177908-4 (Yellow)
177908-6 (Blue)
Power Double Lock (PDL) Connectors
.156 [3.96] Centerlines
Related Product Data
Tab Contacts—page 61
Mating Plug Housings
(Free-Hanging)—pages 62-64
Double Lock Plate—page 71
Panel Cutout
(Applicable Board Thickness: 0.8앑2.0 mm)
Panel Mounting Direction
Section X-X
6 Circuits
Wire-to-Wire
Material
UL94V-0, 6/6 Nylon
Part Number
177909-1 (Natural)
177909-4 (Yellow)
177909-6 (Blue)
Related Product Data
Tab Contacts—page 61
Mating Plug Housings
(Free-Hanging)—pages 62-64
Double Lock Plate—page 71
Panel Cutout
(Applicable Board Thickness: 0.8앑2.0 mm)
Panel Mounting Direction
Section X-X
Note: All dimensions shown are metric.
Note: All part numbers are RoHS Compliant.
68
Catalog 82181
Revised 4-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
Soft Shell
Pin and Socket Connectors
AMP
Power Double Lock (PDL) Connectors (Wire-to-Wire) (Continued)
3.96 mm Centerline Panel Mount Cap Housing
9 Circuits
Wire-to-Wire
Material
UL94V-0, 6/6 Nylon
High Density
Part Number
177911-1 (Natural)
177911-4 (Yellow)
177911-6 (Blue)
Panel Cutout
(Applicable Board Thickness: 0.8앑2.0 mm)
Related Product Data
Tab Contacts—page 61
Mating Plug Housings
(Free-Hanging)—pages 62-64
Double Lock Plate—page 71
Panel Mounting Direction
Power Double Lock (PDL) Connectors
.156 [3.96] Centerlines
Section X-X
For 10 Circuits
Wire-to-Wire
Material
UL94V-0, 6/6 Nylon
Part Number
177912-1 (Natural)
177912-4 (Yellow)
177912-6 (Blue)
10.85
Related Product Data
Tab Contacts—page 61
Mating Plug Housings
(Free-Hanging)—pages 62-64
Double Lock Plate—page 71
8.1
Panel Cutout
(Applicable Board Thickness: 0.8앑2.0 mm)
Panel Mounting Direction
Note: All dimensions shown are metric.
Section X-X
Note: All part numbers are RoHS Compliant.
69
Catalog 82181
Revised 4-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
Soft Shell
Pin and Socket Connectors
AMP
Power Double Lock (PDL) Connectors (Wire-to-Wire) (Continued)
3.96 mm Centerline Panel Mount Cap Housing
12 Circuits
Wire-to-Wire
High Density
Material
UL94V-0, 6/6 Nylon
Part Number
177913-1 (Natural)
177913-4 (Yellow)
177913-6 (Blue)
Power Double Lock (PDL) Connectors
.156 [3.96] Centerlines
Related Product Data
Tab Contacts—page 61
Mating Plug Housings
(Free-Hanging)—pages 62-64
Double Lock Plate—page 71
Panel Cutout
(Applicable Board Thickness: 0.8앑2.0 mm)
Panel Mounting Direction
Section X-X
Note: All dimensions shown are metric.
Note: All part numbers are RoHS Compliant.
70
Catalog 82181
Revised 4-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
Soft Shell
Pin and Socket Connectors
AMP
Power Double Lock (PDL) Connectors (Wire-to-Board and Wire-to-Wire)
3.96 mm Centerline Double-Lock Plates
Double Lock Plates
For 1 Circuit
For 2 Circuits
For 3 Circuits
Material
UL94V-0, glass filled 6/6 Nylon,
natural color
High Density
Part Number
316770-1 (1 Pos.)
177918-1 (2 Pos.)
177919-1 (3 Pos.)
177920-1 (4 Pos.)
177921-1 (5 Pos.)
For 4 Circuits
No. of
Pos.
1
2
3
4 (1 Row)
4 (2 Rows)
6
8
9
10
12
For 5 Circuits
Applicable Housing Part No.
Cap Housing
Free-Hanging
Panel Mount
316768-첸
316769-첸
——
177898-첸
179463-첸
177906-첸
177899-첸
179464-첸
177907-첸
316501-첸
——
316502-첸
177900-첸
179465-첸
177908-첸
177901-첸
179466-첸
177909-첸
177902-첸
179467-첸
——
177903-첸
——
177911-첸
177904-첸
——
177912-첸
177905-첸
——
177913-첸
Plug
Housing
Power Double Lock (PDL) Connectors
.156 [3.96] Centerlines
Related Product Data
Plug Housings—pages 62-64
Cap Housings —pages 65-70
Double Lock Plate
Part Number
316770-1
177918-1
177919-1
177920-1
177918-1
177919-1
177920-1
177919-1
177921-1
177920-1
(1
(2
(3
(4
(2
(3
(4
(3
(5
(4
Pos.)
Pos.)
Pos.)
Pos.)
Pos.)
Pos.)
Pos.)
Pos.)
Pos.)
Pos.)
Required Qty.
1
1
1
1
2
2
2
3
2
3
Note: All dimensions shown are metric.
Note: All part numbers are RoHS Compliant.
71
Catalog 82181
Revised 4-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
Soft Shell
Pin and Socket Connectors
AMP
Power Double Lock (PDL) Connectors (Wire-to-Board)
3.96 mm Centerline for PC Board Mount Tab Header, Vertical
2 Circuits
Wire-to-Board
High Density
Material and Finish
Housing—UL 94V-0,
glass filled 6/6 Nylon
Contact—Copper alloy, Tin plated
Power Double Lock (PDL) Connectors
.156 [3.96] Centerlines
Part Number
179838-1 (Natural)
179838-2 (Red)
179838-4 (Yellow)
179838-6 (Blue)
179838-9 (Black)
Section X-X
Section Y-Y
Tube (53 ea.)—316299-첸
Related Product Data
Mating Plug Housing
(Free-Hanging)—pages 62-64
*Extent of resin coating
PC Board Layout
(Applicable Board Thickness: 1.6 mm)
3 Circuits
Wire-to-Board
Material and Finish
Housing—UL 94V-0,
glass filled 6/6 Nylon
Contact—Copper alloy, Tin plated
Part Number
179839-1 (Natural)
179839-2 (Red)
179839-4 (Yellow)
179839-6 (Blue)
179839-9 (Black)
Section X-X
Section Y-Y
Related Product Data
Mating Plug Housing
(Free-Hanging)—pages 62-64
PC Board Layout
(Applicable Board Thickness: 1.6 mm)
*Extent of resin coating
Note: All dimensions shown are metric.
Note: All part numbers are RoHS Compliant.
72
Catalog 82181
Revised 4-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
Soft Shell
Pin and Socket Connectors
AMP
Power Double Lock (PDL) Connectors (Wire-to-Board) (Continued)
3.96 mm Centerline for PC Board Mount Tab Header, Vertical (Continued)
4 Circuits (2 Rows)
Wire-to-Board
Part Number
179840-1 (Natural)
179840-4 (Yellow)
179840-6 (Blue)
Section X-X
Section Y-Y
Power Double Lock (PDL) Connectors
.156 [3.96] Centerlines
Related Product Data
Mating Plug Housings
(Free-Hanging)—pages 62-64
High Density
Material and Finish
Housing—UL 94V-0, glass filled
6/6 Nylon.
Contact—Copper alloy, Tin plated
PC Board Layout
(Applicable Board Thickness: 1.6 mm)
*Extent of resin coating
6 Circuits
Wire-to-Board
Material and Finish
Housing—UL 94V-0, glass filled
6/6 Nylon.
Contact—Copper alloy, Tin plated
Part Number
179841-1 (Natural)
179841-4 (Yellow)
179841-6 (Blue)
Section X-X
Section Y-Y
Related Product Data
Mating Plug Housings
(Free-Hanging)—pages 62-64
PC Board Layout
(Applicable Board Thickness: 1.6 mm)
*Extent of resin coating
8 Circuits
Wire-to-Board
Material and Finish
Housing—UL 94V-0, glass filled
6/6 Nylon.
Contact—Copper alloy, Tin plated
Part Number
917845-1 (Natural)
917845-4 (Yellow)
917845-6 (Blue)
Section X-X
Related Product Data
Mating Plug Housings
(Free-Hanging)—pages 62-64
Section Y-Y
PC Board Layout
(Applicable Board Thickness: 1.6 mm)
Note: All dimensions shown are metric.
Note: All part numbers are RoHS Compliant.
*Extent of resin coating
Catalog 82181
Revised 4-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
73
Soft Shell
Pin and Socket Connectors
AMP
Power Double Lock (PDL) Connectors (Wire-to-Board) (Continued)
3.96 mm Centerline for PC Board Mount Tab Header, Vertical
12 Circuits
Wire-to-Board
High Density
Material and Finish
Housing—UL 94V-0,
glass filled 6/6 Nylon
Contact—Copper alloy, Tin plated
Part Number
179843-1 (Natural)
179843-4 (Yellow)
179843-6 (Blue)
Power Double Lock (PDL) Connectors
.156 [3.96] and .312 [7.92] Centerlines
Related Product Data
Mating Plug Housings
(Free-Hanging)—pages 62-64
Section X-X
Section Y-Y
PC Board Layout
(Applicable Board Thickness: 1.6 mm)
*Extent of resin coating
3.96 mm Centerline (2 Pos. = 7.92 mm Centerline) for PC Board Mount Tab Header, Vertical
2 Circuits
Wire-to-Board
Material and Finish
Housing—UL 94V-0,
glass filled 6/6 Nylon
Contact—Copper alloy, Tin plated
Part Number
With kink
179844-1 (Natural)
179844-2 (Red)
179844-4 (Yellow)
179844-6 (Blue)
179844-9 (Black)
Without kink
9-179844-1 (Natural)
9-179844-6 (Blue)
Section X-X
Related Product Data
Mating 3-Circuit Plug Housings
(Free-Hanging)—page 62
PC Board Layout
(Applicable Board Thickness: 1.6 mm)
Section Y-Y
*Extent of resin coating
Note: All dimensions shown are metric.
Note: All part numbers are RoHS Compliant.
74
Catalog 82181
Revised 4-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
Soft Shell
Pin and Socket Connectors
AMP
Power Double Lock (PDL) Connectors (Wire-to-Board and Wire-to-Wire) (Continued)
6.5 mm Centerline Free-Hanging Plug Housing
2 Circuits
12.5 ±0.1
Wire-to-Board
17.2 ±0.1
Related Product Data
Receptacle Contacts—page 61
Double Lock Plate—page 77
Mating Tab Headers—pages 79-81
Material
UL 94V-0, 6/6 Nylon
Circuit #
High Density
Part Number
1939344-1 (Natural)
1.35 REF
6.45 REF
4.1 +0.1
-0
6.5
Centerline
20.6 +0.25
-0
0.85 +0.1
-0.03
3 Circuits
Wire-to-Board
Material
UL 94V-0, 6/6 Nylon
Power Double Lock (PDL) Connectors
.256 [6.50] Centerlines
Related Product Data
Receptacle Contacts—page 61
Double Lock Plate—page 77
Mating Tab Headers—pages 79-81
Part Number
179938-1 (Natural)
179938-2 (Red)
179938-4 (Yellow)
179938-6 (Blue)
179938-9 (Black)
4 Circuits (1 Row)
Wire-to-Board
Related Product Data
Receptacle Contacts—page 61
Double Lock Plate—page 77
Mating Tab Headers—pages 79-81
Material
UL 94V-0, 6/6 Nylon
Part Number
179939-1 (Natural)
179939-4 (Yellow)
179939-6 (Blue)
179939-9 (Black)
4 Circuits (2 Rows)
Wire-to-Board
Related Product Data
Receptacle Contacts—page 61
Double Lock Plate—page 77
Mating Tab Headers—pages 79-81
Material
UL 94V-0, 6/6 Nylon
Housing Lock Type B
Part Number
Housing Lock Type A
179861-1 (Natural)
179861-4 (Yellow)
179861-6 (Blue)
Housing Lock Type B
2-179861-1 (Natural)
2-179861-4 (Yellow)
2-179861-6 (Blue)
Section X-X
Note: All dimensions shown are metric.
Note: All part numbers are RoHS Compliant.
75
Catalog 82181
Revised 4-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
Soft Shell
Pin and Socket Connectors
AMP
Power Double Lock (PDL) Connectors (Wire-to-Board and Wire-to-Wire) (Continued)
6.5 mm Centerline Free-Hanging Plug Housing
6 Circuits
Housing Lock Type B
Wire-to-Board
High Density
Material
UL 94V-0, 6/6 Nylon
Part Number
Housing Lock Type A
179862-1 (Natural)
179862-4 (Yellow)
179862-6 (Blue)
Power Double Lock (PDL) Connectors
.256 [6.50] Centerlines
Housing Lock Type B
2-179862-1 (Natural)
2-179862-4 (Yellow)
2-179862-6 (Blue)
Related Product Data
Receptacle Contacts—page 61
Double Lock Plate—page 77
Mating Tab Headers—pages 79-81
Section X-X
12 Circuits
Housing Lock Type B
Wire-to-Board
Material
UL 94V-0, 6/6 Nylon.
Part Number
Housing Lock Type A
917354-1 (Natural)
Housing Lock Type B
2-917354-1 (Natural)
Related Product Data
Receptacle Contacts—page 61
Double Lock Plate—page 77
Mating Tab Headers—pages 79-81
Section X-X
Note: All dimensions shown are metric.
Note: All part numbers are RoHS Compliant.
76
Catalog 82181
Revised 4-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
Soft Shell
Pin and Socket Connectors
AMP
Power Double Lock (PDL) Connectors (Wire-to-Board and Wire-to-Wire) (Continued)
6.5 mm Centerline Double-Lock Plates
Material
UL94V-0, glass filled
6/6 Nylon, natural color
For 2 Circuits
For 3 Circuits
Wire-to-Board
Wire-to-Board
High Density
Part Number
316061-1 (2-Circuits)
316062-1 (3-Circuits)
316063-1 (4-Circuits)
353891-1 (6-Circuits)
Related Product Data
Plug Housings
(Free-Hanging)—pages 75-76
Power Double Lock (PDL) Connectors
.256 [6.50] Centerlines
For 4 Circuits
Wire-to-Board
For 6 Circuits
Wire-to-Board
No. of
Pos.
Applicable Plug
Housing Part No.
3
4 (1 Row)
4 (2 Rows)
6
12
179938-첸
179939-첸
179861-첸
179862-첸
917354-첸
Double Lock Plate
Part Number
316062-1
316063-1
316061-1
316062-1
353891-1
Required Qty.
1
1
2
2
2
Note: All dimensions shown are metric.
Note: All part numbers are RoHS Compliant.
77
Catalog 82181
Revised 4-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
Soft Shell
Pin and Socket Connectors
AMP
PageHead_12_HelvCdBd
Power
Double Lock (PDL)(Continued)
Connectors (Wire-to-Board) (Continued)
6.5 mm Centerline Panel Mount Cap Housing
26.1
(9.6)
(4.2)
2.1
2 Circuits
10.4 ± 0.13
Wire-to-Wire
10.35 ± 0.13
High Density
Material and Finish
Housing—UL 94V-0,
glass filled 6/6 Nylon
Contact—Copper alloy, Tin plated
12.5
7.8 ± 0.13
8.4 ± 0.13
12
Part Number
1939343-1 (Natural)
(2.45)
9.2
Power Double Lock (PDL) Connectors
.256 [6.50] Centerlines
7.1
Pitch
6.5
4 Circuits
26.1
(9.6)
(4.2)
12.8 ± 0.13
10.4 ± 0.13
Wire-to-Wire
Material and Finish
Housing—UL 94V-0,
glass filled 6/6 Nylon
Contact—Copper alloy, Tin plated
(2.1)
16.1 ± 0.13
12.5
10.1 ± 0.13
13.15 ± 0.13
Part Number
1903486-1 (Natural)
12.8 ± 0.13
1.35 ± 0.13
18.3 ± 0.13
12
(2.45)
15.8
Pitch
6.5
13.6
Pitch
6.5
6 Circuits
(9.6)
(4.2)
Wire-to-Wire
19.3 ± 0.13
(2.1)
10.4 ± 0.13
Material and Finish
Housing—UL 94V-0,
glass filled 6/6 Nylon
Contact—Copper alloy, Tin plated
16.1 ± 0.13
10.1 ± 0.13
19
13.15 ± 0.13
Part Number
1903487-1 (Natural)
1.35 ± 0.13
19.3 ± 0.13
24.85 ± 0.13
12
(2.45)
15.8
Pitch
6.5
Note: All dimensions shown are metric.
Note: All part numbers are RoHS Compliant.
13.6
Pitch
6.5
26.1
13
78
Catalog 82181
Revised 4-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
Soft Shell
Pin and Socket Connectors
AMP
PageHead_12_HelvCdBd
Power
Double Lock (PDL)(Continued)
Connectors (Wire-to-Board) (Continued)
6.5 mm Centerline (2 Pos.=13 mm Centerline) PC Board Mount Tab Header, Vertical
3 Circuits
Wire-to-Board
Section Y-Y
Section X-X
Part Number
179846-1 (Natural)
179846-4 (Yellow)
179846-6 (Blue)
PC Board Layout
(Applicable Board Thickness: 1.6 mm)
*Extent of resin coating
2 Circuits
(13 mm Centerline)
Wire-to-Board
Material and Finish
Housing—UL 94V-0,
glass filled 6/6 Nylon
Contact—Copper alloy, Tin plated
Section X-X
Section Y-Y
Part Number
917745-1 (Natural)
917745-4 (Yellow)
917745-6 (Blue)
Tube (26 ea.)—917746-첸
Related Product Data
Mating 3-Circuit Plug Housings
(Free-Hanging)—page 75
PC Board Layout
(Applicable Board Thickness: 1.6 mm)
*Extent of resin coating
4 Circuits (1 Row)
Wire-to-Board
Material and Finish
Housing—UL 94V-0,
glass filled 6/6 Nylon
Contact—Copper alloy, Tin plated
Part Number
179847-1 (Natural)
179847-4 (Yellow)
179847-6 (Blue)
Section Y-Y
Section X-X
Related Product Data
Mating Plug Housings
(Free-Hanging)—pages 75-76
PC Board Layout
(Applicable Board Thickness: 1.6 mm)
*Extent of resin coating
Note: All dimensions shown are metric.
Note: All part numbers are RoHS Compliant.
79
Catalog 82181
Revised 4-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
Power Double Lock (PDL) Connectors
.256 [6.50] and .512 [13.00] Centerlines
Related Product Data
Mating Plug Housings
(Free-Hanging)—pages 75-76
High Density
Material and Finish
Housing—UL 94V-0,
glass filled 6/6 Nylon
Contact—Copper alloy, Tin plated
Soft Shell
Pin and Socket Connectors
AMP
PageHead_12_HelvCdBd
Power
Double Lock (PDL)(Continued)
Connectors (Wire-to-Board) (Continued)
6.5 mm Centerline PC Board Mount Tab Header, Vertical
4 Circuits (2 Rows)
Wire-to-Board
High Density
Material and Finish
Housing—UL 94V-0,
glass filled 6/6 Nylon
Contact—Copper alloy, Tin plated
Power Double Lock (PDL) Connectors
.256 [6.50] Centerlines
Part Number
179848-1 (Natural)
179848-4 (Yellow)
179848-6 (Blue)
Tube (40 ea.)—917747-첸
Section X-X
Section Y-Y
Related Product Data
Mating Plug Housings
(Free-Hanging)—pages 75-76
PC Board Layout
(Applicable Board Thickness: 1.6 mm)
*Extent of resin coating
6 Circuits
Wire-to-Board
Material and Finish
Housing—UL 94V-0,
glass filled 6/6 Nylon
Contact—Copper alloy, Tin plated
Part Number
179849-1 (Natural)
179849-4 (Yellow)
179849-6 (Blue)
Section X-X
Section Y-Y
Related Product Data
Mating Plug Housings
(Free-Hanging)—pages 75-76
PC Board Layout
(Applicable Board Thickness: 1.6 mm)
*Extent of resin coating
Note: All dimensions shown are metric.
Note: All part numbers are RoHS Compliant.
80
Catalog 82181
Revised 4-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
Soft Shell
Pin and Socket Connectors
AMP
PageHead_12_HelvCdBd
Power
Double Lock (PDL)(Continued)
Connectors (Wire-to-Board) (Continued)
6.5 mm Centerline PC Board Mount Tab Header, Vertical
12 Circuits
Wire-to-Board
Section X-X
Section Y-Y
Power Double Lock (PDL) Connectors
.256 [6.50] Centerlines
Part Number
With Boss, With kink
917353-1 (Natural)
Without Boss, Without kink
3-917353-1 (Natural)
High Density
Material and Finish
Housing—UL 94V-0,
glass filled 6/6 Nylon
Contact—Copper alloy, Tin plated
Related Product Data
Mating Plug Housings
(Free-Hanging)—pages 75-76
*Extent of resin coating
PC Board Layout
(Applicable Board Thickness: 1.6 mm)
Note: All dimensions shown are metric.
Note: All part numbers are RoHS Compliant.
81
Catalog 82181
Revised 4-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
Soft Shell
Pin and Socket Connectors
AMP
Engineering Notes
82
Catalog 82181
Revised 4-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
Soft Shell
Pin and Socket Connectors
AMP
Mini-Universal MATE-N-LOK Connectors
Product Facts
Compact, durable housings
■
Pins and sockets can be
accommodated in the same
housings
■
Contacts fully protected in
the housings. Both pins and
sockets can be used on the
power supply wiring
■
Fully polarized to provide
proper plug-to-cap mating
incorporating a positive
locking mechanism to
help prevent accidental
disengagement of mated
connectors. Also facilitates
panel mounting
■
Free-hanging or panel
mount
■
Housings available in 1, 2,
3, 4, 6, 9, 12 and 15 circuit
configuration for wire-towire connection
■
Connectors can be mounted
to .031-.079 [0.79-2.00]
thick panels
■
Printed circuit board pin
headers are available in 2
thru 24 circuit vertical and
right-angle configurations
Hermaphroditic housings
available in 2, 3 and 4
circuits for free-hanging
applications
■
Low insertion/extraction
forces
■
Contacts accept wire
size range 30-16 AWG
[.05-1.2 mm2]
Performance Characteristics
Technical Documents
The Mini-Universal MATE-N-LOK
Connector performance characteristics
found on pages 83-84 are based on
free-hanging and panel mount connectors, loaded with contacts crimped on
stranded wire.
Product Specifications
108-1542 Mini-Universal MATE-N-LOK
Connectors
108-1543 Mini-Universal MATE-N-LOK
Headers
108-5151 Mini-Universal MATE-N-LOK
Connectors (UL94V-2)
108-5138 Mini-Universal MATE-N-LOK
Connectors (UL94V-0)
Low Level Termination Resistance
20 milliohms max. total resistance
between wire crimps of a mated pin and
socket
Mini-Universal MATE-N-LOK Connectors
.163 [4.14] Centerline
■
High Density
■
Application Specification
114-16017 Mini-Universal MATE-N-LOK
Connectors
Instruction Sheets
408-3234 Mini-Universal MATE-N-LOK
Connectors
411-5105 Mini-Universal MATE-N-LOK
Connectors
Dielectric Withstanding Voltage—
1.5 KVAC between adjacent circuits
■
Test probe contacts available
■
.163 [4.14] centerline
spacing
■
Not for interrupting current
■
Recognized under the
Component
Program of
Underwriters Laboratories
Inc., File No. E28476
Insulation Resistance—
1000 megohms minimum between
adjacent circuits
Voltage Rating—600 V AC or DC
Contact Retention—8 lb. min.
per contact
Durability—20 cycles, mating and
unmating
R
■
Certified by Canadian
Standards Association,
File No. LR 7189
R
83
Catalog 82181
Revised 4-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
Soft Shell
Pin and Socket Connectors
AMP
Mini-Universal MATE-N-LOK Connectors (Continued)
Performance
Characteristics (Continued)
High Density
Maximum Current—Maximum
current rating of Mini-Universal
MATE-N-LOK connectors is limited by
the maximum operating temperature of
the housings which is 105°C including
the temperature rise of the contacts
which is a maximum of 30°C. There are
several variables which have a direct
effect on this maximum current-carrying
capability for a given connector and
must be considered for each application.
These variables are:
Mini-Universal MATE-N-LOK Connectors
.163 [4.14] Centerline
Wire Size—Larger diameter wire will
carry more current since it has less
internal resistance to current flow and
thus generates less heat. Longer wire
lengths also enhance current-carrying
capabilities since the wire conducts heat
away from the connector.
Current Rating Verification for 30°C Maximum Temperature Rise 100% Energized
Wire-to-Wire
Mini-Universal MATE-N-LOK Connectors — Calculated Current Table
Number of
Circuits
16
18
20
Wire AWG
22
24
26
30
2
3
4
6
9
12
15
9.50
8.50
8.00
7.00
6.00
6.00
5.50
9.00
8.00
7.00
6.50
5.50
5.50
5.00
7.50
7.00
6.00
5.50
4.50
4.50
4.00
6.00
5.50
5.00
4.50
4.00
3.50
3.50
5.00
4.50
4.50
4.00
3.50
3.00
3.00
4.00
4.00
3.50
3.00
3.00
2.50
2.50
3.00
3.00
2.50
2.50
2.00
2.00
2.00
Values are based on initial Temperature Rise versus Current Testing and are intended to be a guide in the selection of
a connector family. All applications should be tested by the end user. The values listed are per circuit, for fully loaded
housings being 100% energized. Note: All combinations above were not tested and this chart contains interpolated
and extrapolated values.
Connector Size—In general, the more
circuits in a connector, the less current
can be carried.
Ambient Temperature—The higher
the ambient temperature, the less current
can be carried in any given connector.
Minimum Wire Lengths for T-Rise vs. Current Testing
AWG
30
28
26
24
20
Printed Wiring Board Conductor
Size—The finished trace conductor
width and thickness should be maximized to allow for the greatest currentcarrying capacity and heat dissipation.
Mini-Universal MATE-N-LOK connectors
also will withstand the following tests:
Housing Panel Retention—
26 lb. min.
Housing Lock Strength—9 lb. min.
Thermal Shock— –55°C to +105°C
Temperature-Humidity Cycling—
25°C to 65°C at 95 RH
Vibration—10-55-10 cycles per
minute at .06 inch total excursion
Physical Shock—18 drops,
50 G half-sine at 11 milliseconds
Min. Length (in.)
2.6
3.2
4.1
5.1
7.8
AWG
18
16
14
12
10
Min. Length (in.)
9.4
11.3
13.7
16.4
19.3
Note: If wire lengths used are less than those listed above, the currentcarrying ability of the system will be reduced due to less heat being
conducted away from the connector. The customer should fully test
all applications.
Wire-to-Board
Due to the vast differences in trace geometry and printed circuit board configurations, we are unable to provide a
separate current carrying chart for our printed circuit board header products. However, the above Wire-to-Wire charts
may be used as a guideline for headers if the trace width and thickness is equal to the listed wire gauge. For vertical
headers, only 95% of the Wire-to-Wire value should be used. For right-angle headers, only 75% of the Wire-to-Wire
value should be used. The chart values are only a tool for connector selection and will require the customer to fully
test their application.
Termination Resistance/Contact Crimp Tensile Force
Wire Size
AWG
mm2
30
28
26
24
22
20
18
16
.05
.08
.12
.2
.3
.5
.8
1.2
Termination
Resistance
Test
Resistance
Current
Milliohms
(Amps)
(Max. Init.)
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
Contact
Crimp
Tensile Force
Force (Min.)
lbs.
N
—
—
—
—
4
18
7
31
11
49
13
58
15
67
18
80
84
Catalog 82181
Revised 4-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
Soft Shell
Pin and Socket Connectors
AMP
Mini-Universal MATE-N-LOK Connectors (Continued)
Mini-Universal MATE-N-LOK Connector Mating Combinations
Connector Part Number
Number
of
Circuits
Flammability
Rating
Style
Plug1 Housing
Part No.
Cap1 Housing
Part No.
UL94V-2
In-Line
172335-1
172327-14
UL94V-0
In-Line
172164-1
1
UL94V-2
In-Line
UL94V-0
In-Line
172159-12
794805-17
172339-1
794939-12,7
172331-12
172168-1
172160-12
794895-17
794940-12,7
794894-17
172808-13
UL94V-2
In-Line
UL94V-0
In-Line
UL94V-2
Dual Row
UL94V-0
Dual Row
3
173957-13
4
6
8
9
10
12
14
172337-1
UL94V-2
Dual Row
UL94V-0
Dual Row
UL94V-0
Dual Row
172166-1
770579-1
—
794941-12,7
172332-12
172161-12
UL94V-2
Matrix
794821-17
172340-1
UL94V-0
Matrix
172169-1
UL94V-0
Dual Row
UL94V-2
770580-1
—
Matrix
794781-17
172341-1
794942-12,7
172333-12
Matrix
172170-1
172162-12
Dual Row
770581-1
—
Dual Row
770582-1
—
UL94V-0
UL94V-0
UL94V-2
Matrix
172342-1
172334-12
UL94V-0
Matrix
172171-1
172163-12
16
UL94V-0
Dual Row
770583-1
—
18
UL94V-0
Dual Row
770584-1
—
20
UL94V-0
Dual Row
770585-1
—
22
UL94V-0
Dual Row
770586-1
—
24
UL94V-0
Dual Row
770587-1
—
15
Mini-Universal MATE-N-LOK Connectors
.163 [4.14] Centerline
172167-1
172165-1
—
Tin6
Duplex5
—
—
—
—
Tin6
Duplex5
Tin/Duplex
—
Tin
Duplex5
—
Tin
Duplex5
—
—
—
Tin
Duplex5
Tin/Duplex
—
Tin
Duplex5
Tin/Duplex
Tin
Duplex5
Tin/Duplex
—
Tin
Duplex5
Tin
Duplex5
Tin/Duplex
—
Tin
Duplex5
Tin
Duplex5
Tin
Duplex5
—
Tin
Duplex5
Tin
Duplex5
Tin
Duplex5
Tin
Duplex5
Tin
Duplex5
Tin
Duplex5
Right-Angle
With
Board Lock
—
1-794374-0
1-794374-1
—
—
—
—
1-770966-0
1-770966-1
1-770966-1
—
—
—
—
1-770967-0
1-770967-1
—
—
—
1-770968-0
1-770968-1
1-770968-1
—
1-770969-0
1-770969-1
1-770969-1
1-770970-0
1-770970-1
1-770970-1
—
—
—
1-770971-0
1-770971-1
1-770971-1
—
—
—
1-770972-0
1-770972-1
1-770973-0
1-770973-1
—
—
—
1-770974-0
1-770974-1
1-794105-0
1-794105-1
1-794106-0
1-794106-1
1-794107-0
1-794107-1
1-794108-0
1-794108-1
High Density
172809-13
172338-1
173958-13
172336-1
172807-13
173956-13
2
172156-14
172328-12
172343-14
172807-13
173956-13
172157-12
172233-14
794896-12,7
172808-13
172329-12
172344-14
173957-13
172158-12
172234-14
172809-13
172330-12
173958-13
Plating
Mating Connector Part Number
PC Board Pin Headers
Vertical
With
Without
Blindmate
Drain Holes
Drain Holes
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
1-770166-0
1-770872-0
—
1-770166-1
1-770872-1
—
1-770166-1
1-770872-1
—
—
—
—
—
—
—
—
—
—
—
—
—
1-770170-0
1-770873-0
—
1-770170-1
1-770873-1
—
—
—
—
—
—
—
—
—
—
1-770174-0
1-770874-0
1-794325-0
1-770174-1
1-770874-1
1-794325-1
1-770174-1
1-770874-1
—
—
—
—
1-770178-0
1-770875-0
1-794326-0
1-770178-1
1-770875-1
1-794326-1
1-770178-1
1-770875-1
—
1-794065-0
1-794073-0
1-794327-0
1-794065-1
1-794073-1
1-794327-1
1-794065-1
1-794073-1
—
—
—
—
1-770182-0
1-770876-0
1-794432-0
1-770182-1
1-770876-1
1-794432-1
1-770743-0
1-770858-0
1-794328-0
1-770743-1
1-770858-1
1-794328-1
1-770743-1
1-770858-1
—
—
—
—
1-770186-0
1-794040-0
1-794329-0
1-770186-1
1-794040-1
1-794329-1
1-794066-0
1-770621-0
—
1-794066-1
1-770621-1
—
1-794067-0
1-794074-0
—
1-794067-1
1-794074-1
—
—
—
—
1-770190-0
1-770859-0
1-794330-0
1-770190-1
1-770859-1
1-794330-1
1-794068-0
1-794075-0
—
1-794068-1
1-794075-1
—
1-794069-0
1-794076-0
—
1-794069-1
1-794076-1
—
1-794070-0
1-794077-0
—
1-794070-1
1-794077-1
—
1-794071-0
1-794078-0
—
1-794071-1
1-794078-1
—
1-794072-0
1-794079-0
—
1-794072-1
1-794079-1
—
1Mini-Universal
MATE-N-LOK plug and cap housings accept pin or socket contacts. Use the appropriate contacts in the plug housing as required by the mating
connector. All Plugs are free-hanging and Caps are free-hanging or panel mount, unless otherwise noted.
2Panel mount only.
3Hermaphroditic: Mates to itself.
4Free-hanging only.
5Duplex Finish — Plated with .000030 [.000762] min. gold in mating area and matte tin on solder tail end over .000050 [.00127] min. nickel underplate on entire contact.
6Tin Finish — Plated with .000150 [.00381] min. tin over .000050 [.00127] min. nickel underplate on entire contact.
7For Splash-Proof Sealing.
Note: All part numbers are RoHS Compliant.
85
Catalog 82181
Revised 4-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
Soft Shell
Pin and Socket Connectors
AMP
Mini-Universal MATE-N-LOK Connectors (Continued)
Contacts
.6592
[16.74]
.6712
[17.04]
Pin diameter .039 [0.99]
Material
High Density
Brass or Phosphor bronze
Stock Thickness .008 [0.20]
These contacts are to be used in MiniUniversal MATE-N-LOK Plug or Cap
housings only.
Pin
Wire Size Ins. Dia.
Range
Range
AWG [mm2]
Related Product Data
Product Specifications
108-1542 Mini-Universal MATE-N-LOK
Connectors
108-1543 Mini-Universal MATE-N-LOK
Headers
Mini-Universal MATE-N-LOK Connectors
.163 [4.14] Centerline
Application Specification
114-16017 Mini-Universal MATE-N-LOK
Connectors
Performance Characteristics—
pages 83-84
Housings — pages 87-89
Technical Documents— pages 83
and 205-206
Application Tooling— pages 207210
30 -26
[.05 -.12]
.035 -.050
.889 -1.27
26 -22
[.12 -.3]
.047 -.069
1.19 -1.75
22 -18
[.3 -.8]
or
22 x (2)
[.3]
.059 -.094
1.50 -2.39
or
.067 x (2)
3.38
20-16
[.5-1.2]
or
20 x (2)
[.5]
.079 -.126
2.01-3.20
or
.075 x (2)
1.91
Socket
Contact Part Numbers
Pin
Socket
Material
and Finish
Strip
Form
Brass, Pre-tin
770835-1
Phos. Brz., Pre-tin
—
Brass, Duplex1 1-770835-0
Phos. Brz., Duplex1
—
Brass, Pre-tin
770901-1
Phos. Brz., Pre-tin
—
Brass, Duplex1 1-770901-0
Phos. Brz., Duplex1
—
Brass, Pre-tin
770903-1
Phos. Brz., Pre-tin
—
Brass, Duplex1 1-770903-0
Phos. Brz., Duplex1
—
Brass, Pre-tin
794406-12
Phos. Brz., Pre-tin
—
Brass, Duplex1 1-794406-02
Phos. Brz., Duplex1
—
Loose
Pieces
794059-1
—
1-794059-0
—
770985-1
—
1-770985-0
—
770987-1
—
1-770987-0
—
171638-12
—
—
—
Strip
Form
770834-1
770834-4
1-770834-0
1-770834-1
770902-1
770902-4
1-770902-0
1-770902-1
770904-1
770904-4
1-770904-0
1-770904-1
794407-12
794407-42
1-794407-02
1-794407-12
Loose
Pieces
794058-1
—
1-794058-0
—
770986-1
—
1-770986-0
—
770988-1
—
1-770988-0
—
171639-12
—
—
—
HDM
Hand
Applicator
Tool
Part No. Part No.
567418-13
3
567418-2
567418-33
90717-2
567066-34
567066-44
567066-54
91529-1
567067-13
567067-23
567067-33
91522-1
680582-23
680582-33
91536-1
Duplex Finish — Plated with .000030 [.000762] min. gold in mating area and .000100 [.00254] min. tin in crimping
area over .000050 [.00127] min. nickel underplate on entire contact.
2 .671 [17.04] and .659 [16.74] dimensions are .689 [17.50] for indicated part numbers.
3 HDM Applicator part number ending in -1 is used on AMPOMATOR CLS Machine with T or G Terminators, -2 is used
on AMP-O-LECTRIC Model K Machine, -3 is used on AMP-O-ELECTRIC Model G Machine. See pages 207-210 for
further information.
4 HDM Applicator part number ending in -3 is used on AMPOMATOR CLS Machine with T or G Terminators, -4 is used
on AMP-O-LECTRIC Model K Machine, -5 is used on AMP-O-LECTRIC Model G Machine. See pages 207-210 for
further information.
Note: All part numbers are RoHS Compliant.
1
Keying Plug
1.004
[2.55]
Material
UL94V-0 Nylon, white color
Part Number
174670-1
Test Probe Contact
1.378
[35.00]
Material and Finish
Phosphor bronze, nickel plated
Part Number
172971-1
Notes:
1. The test probe is inserted into the housing in the
same direction as indicated by the arrow shown
to the right.
2. The test probe can be used in the Cap or Plug
Housing.
3. Test probes are supplied unassembled.
Contact Extraction Tool
No. 189727-1
IS 408-4118
Contact Insertion Tool
(For inserting contacts applied to small diameter wire)
No. 91002-1
IS 408-7347
86
Catalog 82181
Revised 4-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
Soft Shell
Pin and Socket Connectors
AMP
Mini-Universal MATE-N-LOK Connectors (Continued)
Housings
1 Circuit, Free-Hanging
Free-Hanging or Panel Mount
.933
[23.70]
.163 [4.14] Centerline spacing
Related Product Data
.110
[2.79]
.933
[23.70]
.110
[2.79]
.323
[8.20]
.272
[6.91]
.220
[5.59]
.220
[5.59]
.110
[2.79]
Plug
.110
[2.79]
2 and 3 Circuit,
In-Line
.933
.933
[2.37]
[23.70]
.220
[5.59]
.220
[5.59]
[.559]
.110
[2.79]
[.279]
.163
[.414]
[4.14]
.163
[4.14]
A
A
B
B
Cap
High Density
.933
[23.70]
.110
[2.79]
C
Mini-Universal MATE-N-LOK Connectors
.163 [4.14] Centerline
Product Specifications
108-1542 Mini-Universal MATE-N-LOK
Connectors
108-1543 Mini-Universal MATE-N-LOK
Headers
108-5151 Mini-Universal MATE-N-LOK
Connectors (UL94V-2)
108-5138 Mini-Universal MATE-N-LOK
Connectors (UL94V-0)
Performance Characteristics—
pages 83-84
Contacts — page 86
Keying Plug — page 86
Test Probe Contact — page 86
Panel Cutout Recommendations—
page 89
Technical Documents— pages 83
and 205-206
Mating Headers — pages 90-92
.220
[5.59]
.220
[5.59]
Cap (Free-Hanging)
Plug
.220
[5.59]
.933
[23.70]
.110
[2.79]
.163
[4.14]
A
D
Cap (Panel Mount)
Number
of
Circuits
1
2
3
A
Dimensions
B
C
—
—
—
.386 .425 .488
9.80 10.79 12.39
.551 .591 .654
14.00 15.01 16.61
D
—
.464
11.78
.630
16.00
Housing Part Numbers1
UL94V-0 Nylon, White Color
UL94V-2 Nylon, Natural Color
Cap
Cap
Plug
Plug
Panel Mount Free-Hanging
Panel Mount Free-Hanging
172164-1
—
172156-1
172335-1
—
172327-1
172165-1
172157-1
172233-1
172336-1
172328-1
172343-1
172166-1
172158-1
172234-1
172337-1
172329-1
172344-1
Note: All part numbers are RoHS Compliant.
4 and 6 Circuit, Dual Row
.933
[23.70]
.386
.386
[9.80] [9.80]
A
.933
[23.70]
A
.465
[11.81]
.465
[11.81]
.163
[4.14]
Plug
Number
of
Circuits
4
6
A
Dim.
.386
9.80
.551
14.00
.163
[4.14]
Cap
Housing Part Numbers1
UL94V-0 Nylon, White Color
UL94V-2 Nylon, Natural Color
Plug
Cap
Plug
Cap
172167-1
172159-1
172338-1
172330-1
172168-1
172160-1
172339-1
172331-1
1Housing part numbers shown in both charts (above) are also available in other colors: Red, Green, Blue, Black.
To order connectors in these colors use the appropriate dash numbers as follows: Red 1-XXXXXX-2,
Green 1-XXXXXX-5, Blue 1-XXXXXX-6, Black 1-XXXXXX-9
Note: All part numbers are RoHS Compliant.
87
Catalog 82181
Revised 4-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
Soft Shell
Pin and Socket Connectors
AMP
Mini-Universal MATE-N-LOK Connectors (Continued)
Housings
9, 12 and 15 Circuit,
Free-Hanging or Panel Mount, Matrix
.163 [4.14] Centerline spacing
.933
[23.69]
Related Product Data
Mini-Universal MATE-N-LOK Connectors
.163 [4.14] Centerline
High Density
Product Specifications
108-1542 Mini-Universal MATE-N-LOK
Connectors
108-1543 Mini-Universal MATE-N-LOK
Headers
108-5151 Mini-Universal MATE-N-LOK
Connectors (UL94V-2)
108-5138 Mini-Universal MATE-N-LOK
Connectors (UL94V-0)
Performance Characteristics—
pages 83-84
Contacts — page 86
Keying Plug — page 86
Test Probe Contact — page 86
Panel Cutout Recommendations—
page 89
Technical Documents— pages 83
and 205-206
Mating Headers — pages 90-92
A
.933
[23.69]
A
.551
.551
[13.99] [13.99]
.630
[16.0]
.163
[4.14]
.630
[16.00]
.163
[4.14]
Cap
Plug
Number
of
Circuits
A
Dim.
9
.551
13.99
.716
18.19
.882
22.40
12
15
Housing Part Numbers1
UL94V-0 Nylon, White Color
UL94V-2 Nylon, Natural Color
Plug
Cap
Plug
Cap
172169-1
172161-1
172340-1
172332-1
172170-1
172162-1
172341-1
172333-1
172171-1
172163-1
172342-1
172334-1
1Housing
part numbers shown in chart are also available in other colors: Red, Green, Blue, Black. To order connectors in
these colors use the appropriate dash numbers as follows: Red 1-XXXXXX-2, Green 1-XXXXXX-5, Blue 1-XXXXXX-6,
Black 1-XXXXXX-9
Note: All part numbers are RoHS Compliant.
8 thru 24 Circuit,
Free-Hanging, Dual Row
A
.598
[15.19]
.163
[4.14]
.933
[23.70]
.163
Typ.
[4.14]
Plug
Number
of
Circuits
8
10
12
14
16
18
20
22
24
A
Dim.
.714 18.14
.877 22.28
1.040 26.42
1.203 30.56
1.366 34.70
1.529 38.84
1.692 42.98
1.855 47.12
2.018 51.26
Part Number
UL94V-0 Nylon, White Color
Plug
770579-1
770580-1
770581-1
770582-1
770583-1
770584-1
770585-1
770586-1
770587-1
Note: All part numbers are RoHS Compliant.
88
Catalog 82181
Revised 4-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
Soft Shell
Pin and Socket Connectors
AMP
Mini-Universal MATE-N-LOK Connectors (Continued)
Housings
Hermaphroditic
Free-Hanging
2, 3 and 4 Circuit
Related Product Data
.827
[21.0]
.992
[25.19]
.551
[14.0]
.228
[5.8]
.323
[8.20]
.228
[5.8]
.386
[9.80]
.551
[10.40]
.992
[25.19]
.299
[7.59]
High Density
.598
[15.2]
.598
[15.19]
.228
[5.8]
.276
[7.01]
.661
[16.79]
Mini-Universal MATE-N-LOK Connectors
.163 [4.14] Centerline
Product Specifications
108-1542 Mini-Universal MATE-N-LOK
Connectors
108-1543 Mini-Universal MATE-N-LOK
Headers
108-5151 Mini-Universal MATE-N-LOK
Connectors (UL94V-2)
108-5138 Mini-Universal MATE-N-LOK
Connectors (UL94V-0)
Performance Characteristics—
pages 83-84
Contacts — page 86
Cap Housings — pages 87-89
Technical Documents— pages 83
and 205-206
.992
[25.19]
.323
[8.20]
.504
[12.8]
Part Numbers
Number
of
Circuits
UL94V-2 Nylon,
Natural Color
172807-1
172808-1
172809-1
2
3
4
UL94V-0 Nylon,
White Color
173956-1
173957-1
173958-1
Note: Housing mates to itself; 2 required per wire-to-wire connection.
Note: All part numbers are RoHS Compliant.
Recommended Cap
Housing Panel Cutouts
A
B
C
.132
[3.35]
View is from cap entry side
Recommended Panel
Thickness .031—.079 [.79 – 2.01]
.063
[1.60]
.211
D
[5.35]
Number
of
Circuits
2
3
4
6
9
12
15
Dimensions
C
A
B
.421
10.69
.421
10.69
.587
14.91
.752
19.10
.752
19.10
.917
23.29
1.080
27.43
.242
6.15
.242
6.15
.407
10.34
.573
14.55
.573
14.55
.738
18.75
.904
22.96
.098
2.49
.181
4.60
.098
2.49
.098
2.49
.181
4.60
.181
4.60
.181
4.60
D
.407
10.3
.573
14.55
.407
10.3
.407
10.3
.573
14.55
.573
14.55
.573
14.55
89
Catalog 82181
Revised 4-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
Soft Shell
Pin and Socket Connectors
AMP
Mini-Universal MATE-N-LOK Connectors (Continued)
Vertical PC Board
Pin Headers
4, 6, 8, 10 and 12 Circuit, Dual Row
2 and 3 Circuit, In-Line
.220
[5.58]
.163 [4.14] Centerline spacing
.531
[13.49]
Housing — Nylon, white
.387
[9.83]
A
Flammability Rating— UL94V-0
Contacts — Brass
Solder tail diameter .039 [1.00]
High Density
A
.030
[0.76]
Material
9, 12 and 15 Circuit, Matrix
14, 16, 18, 20, 22 and 24 Circuit, Dual Row
A
Product Specifications
108-1542 Mini-Universal MATE-N-LOK
Connectors
108-1543 Mini-Universal MATE-N-LOK
Headers
108-5151 Mini-Universal MATE-N-LOK
Connectors (UL94V-2)
108-5138 Mini-Universal MATE-N-LOK
Connectors (UL94V-0)
.030
[.76]
.175
[4.44]
.531
[13.49]
Related Product Data
Mini-Universal MATE-N-LOK Connectors
.163 [4.14] Centerline
.175
[4.44]
A
.550
[13.97]
.387
[9.83]
.531
[13.49]
A
Dim.
Pin
Finish
In-Line
.387
9.83
3
In-Line
.550
13.97
Mating Connectors
4
Dual Row
.387
9.83
Mini-Universal MATE-N-LOK
Plug Housings — pages 87-89
6
Dual Row
.550
13.97
Mini-Universal MATE-N-LOK 2
Plug Housings — pages 101-102
8
Dual Row
.713
18.11
9
Matrix
.551
14.00
10
Dual Row
.877
22.28
Dual Row
1.039
26.39
Matrix
.713
18.11
14
Dual Row
1.202
30.53
15
Matrix
.877
22.28
16
Dual Row
1.365
34.67
18
Dual Row
1.528
38.81
20
Dual Row
1.691
42.95
22
Dual Row
1.854
47.09
24
Dual Row
2.017
51.23
Tin1
Duplex2
Tin1
Duplex2
Tin1
Duplex2
Tin1
Duplex2
Tin1
Duplex2
Tin1
Duplex2
Tin1
Duplex2
Tin1
Duplex2
Tin1
Duplex2
Tin1
Duplex2
Tin1
Duplex2
Tin1
Duplex2
Tin1
Duplex2
Tin1
Duplex2
Tin1
Duplex2
Tin1
Duplex2
Performance Characteristics—
pages 83-84
Recommended PC Board Hole
Layouts— page 93
Technical Documents— pages 83
and 205-206
Number of
Circuits
Style
2
12
1
2
.531
.531
[13.49]
[13.49]
.030
[.76]
.175
[4.44]
.030
.030
[.762]
[.76]
.175
.175
[4.44]
[4.44]
Mates with Plug Housing
Vertical Pin Header Part Numbers
Part Number
(Using Socket Contact)
With
Without
Drain Holes
Drain Holes Mini-Universal Mini-Universal
MATE-N-LOK MATE-N-LOK 2
1-770166-0
1-770872-0
172165-1
794184-1
1-770166-1
1-770872-1
1-770170-0
1-770873-0
172166-1
794186-1
1-770170-1
1-770873-1
1-770174-0
1-770874-0
172167-1
794188-1
1-770174-1
1-770874-1
1-770178-0
1-770875-0
172168-1
794190-1
1-770178-1
1-770875-1
1-794065-0
1-794073-0
770579-1
794192-1
1-794065-1
1-794073-1
1-770182-0
1-770876-0
172169-1
794194-1
1-770182-1
1-770876-1
1-770743-0
1-770858-0
770580-1
794196-1
1-770743-1
1-770858-1
1-794066-0
1-770621-0
770581-1
794198-1
1-794066-1
1-770621-1
1-770186-0
1-794040-0
172170-1
794200-1
1-770186-1
1-794040-1
1-794067-0
1-794074-0
770582-1
794202-1
1-794067-1
1-794074-1
1-770190-0
1-770859-0
172171-1
794204-1
1-770190-1
1-770859-1
1-794068-0
1-794075-0
770583-1
794206-1
1-794068-1
1-794075-1
1-794069-0
1-794076-0
770584-1
794208-1
1-794069-1
1-794076-1
1-794070-0
1-794077-0
770585-1
794210-1
1-794070-1
1-794077-1
1-794071-0
1-794078-0
770586-1
794212-1
1-794071-1
1-794078-1
1-794072-0
1-794079-0
770587-1
794214-1
1-794072-1
1-794079-1
Tin Finish—Plated with .000150 [.00381] min. tin over .000050 [.00127] min. nickel underplate on entire contact.
Duplex Finish—Plated with .000030 [.000762] min. gold in mating area and matte tin on solder tail end over
.000050 [.00127] min. nickel underplate on entire contact.
Note: All part numbers are RoHS Compliant.
90
Catalog 82181
Revised 4-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
Soft Shell
Pin and Socket Connectors
AMP
Mini-Universal MATE-N-LOK Connectors (Continued)
Vertical PC Board
Blindmate Pin Headers
4, 6, 8 and 10 Circuit,
Dual Row
A
.163 [4.14] Centerline spacing
.645
[16.38]
Material
Housing — Nylon, white
Flammability Rating— UL94V-0
Contacts — Brass
Solder tail diameter .039 [1.00]
Product Specifications
108-1693 Mini-Universal MATE-N-LOK 2
Connectors
108-1694 Mini-Universal MATE-N-LOK 2
Headers
.030
[0.76]
.215
[5.46]
.640
[16.26]
.030
[0.76]
.215
[5.46]
High Density
Related Product Data
.640
[16.26]
A
9, 12 and 15 Circuit,
Matrix
.808
[20.52]
Mating Connectors
Number of
Circuits
4
Style
A
Dim.
Pin
Finish
Pin Header Part Numbers
With Drain Holes
Dual Row
.645
16.38
Tin1
1-794325-0
Duplex2
1-794325-1
Tin1
1-794326-0
Duplex2
1-794326-1
Tin1
1-794327-0
Duplex2
1-794327-1
Tin1
1-794432-0
Duplex2
1-794432-1
Tin1
1-794328-0
Duplex2
1-794328-1
Tin1
1-794329-0
Duplex2
1-794329-1
Tin1
1-794330-0
Duplex2
1-794330-1
Mini-Universal MATE-N-LOK
Plug Housings — pages 87-89
Mini-Universal MATE-N-LOK 2
Plug Housings — pages 101-102
6
8
9
10
12
15
1 Tin
2
Dual Row
Dual Row
Matrix
Dual Row
Matrix
Matrix
.808
20.52
.971
24.66
.808
20.52
1.134
28.80
.971
24.66
1.134
28.80
Mini-Universal MATE-N-LOK Connectors
.163 [4.14] Centerline
Performance Characteristics—
pages 83-84
Recommended PC Board Hole
Layouts— page 93
Technical Documents— pages 83
and 205-206
Mates with Plug Housing
Part Number
(Using Socket Contacts)
Mini-Universal Mini-Universal
MATE-N-LOK MATE-N-LOK 2
172167-1
794188-1
172168-1
794190-1
770579-1
794192-1
172169-1
794194-1
770580-1
794196-1
172170-1
794200-1
172171-1
794204-1
Finish — Plated with .000150 [.00381] min. tin over .000050 [.00127] min. nickel underplate on entire contact.
Duplex Finish — Plated with .000030 [.000762] min. gold in mating area and matte tin on solder tail end over
.000050 [.00127] min. nickel underplate on entire contact.
Note: All part numbers are RoHS Compliant.
91
Catalog 82181
Revised 4-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
Soft Shell
Pin and Socket Connectors
AMP
Mini-Universal MATE-N-LOK Connectors (Continued)
Right-Angle PC Board
Pin Headers
With Board Lock Feature
4, 6, 8, 10 and 12 Circuit, Dual Row
1, 2 and 3 Circuit, In-Line
.163 [4.14] Centerline spacing
.500
[12.70]
Material
.500
[12.70]
A
.030
[0.76]
.145
[3.68]
A
.030
[0.76]
.145
[3.68]
Housing — Nylon, white color
.225
[5.72]
Flammability Rating — UL94V-0
.236
[5.99]
.270
[6.86]
Contacts — Brass
.270
[6.86]
.386
[9.80]
.236
[5.99]
High Density
Solder tail diameter .039 [1.00]
14, 16, 18, 20, 22 and 24 Circuit, Dual Row
Related Product Data
.500
[12.70]
Product Specification
108-1694 Mini-Universal
MATE-N-LOK 2 Headers
.386
[9.80]
Mini-Universal MATE-N-LOK Connectors
.163 [4.14] Centerline
Performance Characteristics—
pages 83-84
Recommended PC Board Hole
Layouts— page 93
Technical Documents— pages 83
and 205-206
Mating Connectors
Mini-Universal MATE-N-LOK
Plug Housings — pages 87-89
A
.030
[0.76]
.145
[3.68]
.270
[6.86]
.236
[5.99]
Number of
Circuits
Style
A
Dim.
Pin
Finish
Pin Header
Part Number
With Board Lock
1
—
.225
5.72
2
In-Line
.388
9.86
3
In-Line
.551
14.00
4
Dual Row
.388
9.86
6
Dual Row
.551
14.00
8
Dual Row
.714
18.14
10
Dual Row
.877
22.28
12
Dual Row
1.040
26.42
14
Dual Row
1.203
30.56
16
Dual Row
1.366
34.70
18
Dual Row
1.529
38.84
20
Dual Row
1.692
42.98
22
Dual Row
1.855
47.12
24
Dual Row
2.018
51.26
Tin1
Duplex2
Tin1
Duplex2
Tin1
Duplex2
Tin1
Duplex2
Tin1
Duplex2
Tin1
Duplex2
Tin1
Duplex2
Tin1
Duplex2
Tin1
Duplex2
Tin1
Duplex2
Tin1
Duplex2
Tin1
Duplex2
Tin1
Duplex2
Tin1
Duplex2
1-794374-0
1-794374-1
1-770966-0
1-770966-1
1-770967-0
1-770967-1
1-770968-0
1-770968-1
1-770969-0
1-770969-1
1-770970-0
1-770970-1
1-770971-0
1-770971-1
1-770972-0
1-770972-1
1-770973-0
1-770973-1
1-770974-0
1-770974-1
1-794105-0
1-794105-1
1-794106-0
1-794106-1
1-794107-0
1-794107-1
1-794108-0
1-794108-1
Mini-Universal MATE-N-LOK 2
Plug Housings — pages 101-102
Mates with Plug Housing
Part Number
(Using Socket Contacts)
Mini-Universal Mini-Universal
MATE-N-LOK MATE-N-LOK 2
172164-1
—
172165-1
794184-1
172166-1
794186-1
172167-1
794188-1
172168-1
794190-1
770579-1
794192-1
770580-1
794196-1
770581-1
794198-1
770582-1
794202-1
770583-1
794206-1
770584-1
794208-1
770585-1
794210-1
770586-1
794212-1
770587-1
794214-1
1Tin
Finish — Plated with .000150 [.00381] min. tin over .000050 [.00127] min. nickel underplate on entire contact.
Finish — Plated with .000030 [.000762] min. gold in mating area and matte tin on solder tail end over
.000050 [.00127] min. nickel underplate on entire contact.
2Duplex
Note: All part numbers are RoHS Compliant.
92
Catalog 82181
Revised 4-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
Soft Shell
Pin and Socket Connectors
AMP
Mini-Universal MATE-N-LOK Connectors (Continued)
Recommended PC Board
Hole Layouts for Vertical
and Blindmate Headers
2 and 3 Circuit, In-Line
.175
[4.44]
.175
[4.44]
.062 [1.57] thick board, tolerances
non-accumulative
.125
Dia.
[3.18]
.055 Dia.
[1.40] Typ.
Related Product Data
4, 6, 8, 10 and 12 Circuit, Dual Row
.163
Typ.
[4.14]
14, 16, 18, 20, 22 and 24 Circuit, Dual Row
.055 ± .003
Typ.
[1.40 ± .076]
.125
Dia.
[3.18]
.163 [4.14]
.055
Dia.
[1.40]
.152
Dia.
[3.86]
.209
[5.33]
4, 8 and 12 Circuit, Dual Row
.163
[4.14]
.0815
[2.070]
4 Plc.
.289
[7.34]
.152
Dia.
[3.86]
.209
[5.33]
.163
Typ.
[4.14]
.055
Dia.
[1.40]
Typ.
.209
[5.33]
.152
Dia.
[3.86]
22 Circuit, Dual Row
.055
Dia.
[1.40]
Typ.
.289
[7.34]
.152
[3.86] Dia.
2 Plc.
.489
[12.42]
2 Plc.
.163
[4.14]
.055
Dia.
[1.40]
Typ.
3 Plc.
.289
[7.34]
.152
Dia.
[3.86]
.209
[5.33]
14 and 18 Circuit, Dual Row
.163
Typ.
[4.14]
.163
[4.14]
.055
Dia.
[1.40]
Typ.
.289
[7.34]
.152
[3.86]
Dia. 2 Plc.
.326
[8.28]
2 Plc.
.209
[5.33]
16, 20 and 24 Circuit, Dual Row
.163
Typ.
[4.14]
.163
[4.14]
3 Circuit, In-Line
6 and 10 Circuit, Dual Row
.289
[7.34]
.209
[5.33]
.152
Dia.
[3.86]
.289
[7.34]
.055
Dia.
[1.40]
Typ.
2 Plc.
.163
[4.14]
.163
Typ.
[4.14]
.055
Dia.
[1.40]
Typ.
.0815
[2.070]
2 Plc.
Mini-Universal MATE-N-LOK Connectors
.163 [4.14] Centerline
Right-Angle Headers— page 92
.163
Typ.
[4.14]
2 Circuit, In-Line
1 Circuit
.289
[7.34]
Related Product Data
.163
[4.14]
.125
[3.18]
2 Plcs.
.163
Typ.
[4.14]
.062 [1.57] thick board, tolerances
non-accumulative
.175
[4.45]
.175
[4.45]
.163
Typ.
[4.14]
Recommended PC Board
Hole Layouts for RightAngle Headers
High Density
9, 12 and 15 Circuit, Matrix
.055 Dia.
[1.40] Typ.
.163
[4.14]
.163
[4.14]
Typ.
Vertical Headers— pages 90-91
.175
[4.44]
.125
Dia.
[3.18]
.055 Dia.
[1.40] Typ.
.209
[5.33]
.163
[4.14]
.0815
[2.070]
4 Plc.
.163
Typ.
[4.14]
.289
[7.34]
.152
Dia.
[3.86]
2 Plc.
.407
[10.35]
2 Plc.
.055
Dia.
[1.40]
Typ.
.209
[5.33]
93
Catalog 82181
Revised 4-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
Soft Shell
Pin and Socket Connectors
AMP
Mini-Universal MATE-N-LOK Connectors (Continued)
Strain Reliefs for Plug or
Cap Housings
6 and 8 Circuit
Plug or
Cap housing
Related Product Data
Housings— pages 87-89
Technical Documents— pages 83
and 205-206
Close and Lock Strain Relief
around housing.
Insert Locking Tab to firmly
secure wires.
Strain
Relief
High Density
These Strain Reliefs may also be used
with AMP-DUAC Receptacle housings
on page 126.
Locking Tab
Mini-Universal MATE-N-LOK Connectors
.163 [4.14] Centerline
Break off plastic
connecting Locking Tab
to Strain Relief
Step 2
Step 1
Style
Number of
Circuits
A
Dim.
Wire Bundle
Dia. Range
Part Numbers
UL94V-0 Nylon, White Color
6
.920
23.36
.165-.220
4.19-5.59
794423-1
8
.920
23.36
.180-.245
4.57-6.22
794370-1
Dual Row
Use With
172168-1
172160-1
172339-1
172331-1
770979-1
9 Circuit
33
20
19
19
13
6
4
9
6
2.8
2PLC
Style
Matrix
9
2.8
2PLC
Part Numbers
Part Number
Number of
Circuits
Plug
316454-1
Cap
316455-1
9
Use With
172169-1
172340-1
172161-1
172332-1
Note: All part numbers are RoHS Compliant.
94
Catalog 82181
Revised 4-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
Soft Shell
Pin and Socket Connectors
AMP
Mini-Universal MATE-N-LOK Sealed Connector System
Product Facts —
Sealed Connector System
■
Wire-to-wire and
wire-to-board
■
Dual row, 2 to 10 positions
(even only) and 16 positions
■
Mates with all standard
Mini-Universal MATE-N-LOK
connector housings and pin
headers (except Blindmate)
■
Positive, polarized keyed
and latched orientation to
ease application
■
Utilizes proven MiniUniversal MATE-N-LOK
contacts with existing
application tooling
■
Tested to Sealing Level of
IP56 and IP57 per IEC 60529
■
Primarily used in
Appliance, Vending and
HVAC applications
■
Compact, durable housings
■
Pins and sockets can be
accommodated in the same
housings
■
Contacts fully protected in
the housings. Both pins and
sockets can be used on the
power supply wiring
■
Fully polarized to provide
proper plug-to-cap mating
incorporating a positive
locking mechanism to
help prevent accidental
disengagement of mated
connectors. Also facilitates
panel mounting
■
Free-hanging or panel mount
■
Connectors can be mounted
to .031-.079 [0.79-2.00]
thick panels
■
With seals, contacts accept
wire size range 26-18 AWG
[.12-.8 mm2] with insulation
diameter of .040-.083
[1.02-2.11]
■
.163 [4.14] centerline spacing
■
Not for interrupting current
Performance Characteristics
Technical Documents
The Mini-Universal MATE-N-LOK
Connector performance characteristics
found on pages 95-96 are based on
free-hanging and panel mount connectors, loaded with contacts crimped on
stranded wire.
Product Specifications
108-1542-2 Mini-Universal MATE-N-LOK
Splash-Proof Seals
108-1542 Mini-Universal MATE-NLOK Connectors
108-1543 Mini-Universal MATE-NLOK Headers
Low Level Termination Resistance
20 milliohms max. total resistance
between wire crimps of a mated pin and
socket
Dielectric Withstanding Voltage—
1.5 KVAC between adjacent circuits
Insulation Resistance—
1000 megohms minimum between
adjacent circuits
Voltage Rating—600 V AC or DC
Contact Retention—8 lb. min.
per contact
Mini-Universal MATE-N-LOK Sealed Connector System
.163 [4.14] Centerline
Splash-proof design allows
use in areas where high
humidity, intermittent liquid
splashing or foam-in applications require a sealed
connector for improved
electrical performance
High Density
■
Application Specification
114-13089 Mini-Universal MATE-N-LOK
Sealed Connector
Instruction Sheets
408-3234 Mini-Universal MATE-N-LOK
Connectors
411-5105 Mini-Universal MATE-N-LOK
Connectors
Durability—20 cycles, mating and
unmating
95
Catalog 82181
Revised 4-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
Soft Shell
Pin and Socket Connectors
AMP
Mini-Universal MATE-N-LOK Sealed Connector System (Continued)
.320
[8.13]
Plug
Part Number 794894-1
(2 position shown)
.599
[15.22]
.486
[12.34]
.386
[9.80]
.163
[4.14]
.220
[5.59]
High Density
.933
[23.70]
Cap
Part Number 794896-1
(2 position shown)
.386
[9.80]
.472
[11.99]
.163
[4.14]
Mini-Universal MATE-N-LOK Sealed Connector System
.163 [4.14] Centerline
.220
[5.59]
.933
[23.70]
Individual Wire Seals
Single Housing Cavity Plug Seal
Single Wire Seal
Part Number 794995-1
Part Number 794758-1
.118.004
[3.0 ± 0.1]
.06.002
[1.50 ± 0.05
.38± 0.10
± 0.10
.38
[9.68
0.25]
[9.68 ±±0.25]
.06 ± .002
[1.50 ± 0.05]
∅.102
[2.6]
∅.102
[2.6]
Interface Seals
.291 ± .004
[7.4 ± 0.1]
∅.161004
[4.1 ± 0.1]
∅.157 ± .004
[4 ± 0.1]
∅.102
[2.6]
± .004
± [0.1]
.291.004
[7.4 ± 0.1]
.294± ±
0.10
.294
0.10
[7.47±±0.25]
0.25]
[7.47
Number of
Positions
2
4
6
8
10
16
Interface
Seals
794772-2
794772-4
794772-6
794772-8
1-794772-0
1-1586362-6
Plug
for Sealing
794894-1
794805-1
794895-1
794821-1
794781-1
794824-1
Cap
for Sealing
794896-1
794939-1
794940-1
794941-1
794942-1
—
Vertical Headers
for Sealing
1-770872-X
1-770874-X
1-770875-X
1-794073-X
1-770858-X
1-794075-X
Right Angle Headers
for Sealing
1-770966-X
1-770968-X
10770969-X
1-770970-X
1-770971-X
1-770974-X
-0 for tin finish, -1 for duplex. See Mini-Universal MATE-N-LOK section for details
Individual Wire Seal
Contacts
Wire Size Ins. Dia.
Range
Range
AWG [mm2]
Material
and Finish
26 -22
[.12 -.3]
.040-.060
1.02-1.52
Brass, Pre-tin
Brass, Duplex1
22 -18
[.3 -.8]
.050-.083
1.27-2.11
Brass, Pre-tin
Brass, Duplex1
Contact Part Numbers (for use with Single Wire Seals)
Pin
Socket
Strip
Form
Loose
Piece
Strip
Form
Loose
Piece
HDM
Applicator
Part No.
567066-33
770901-1 770985-1
770902-1 770986-1
567066-43
1-770901-0 1-770985-0 1-770902-0 1-770986-0
567066-53
567067-12
770903-1 770987-1
770904-1 770988-1
567067-22
1-770903-0 1-770987-0 1-770904-0 1-770988-0
567067-32
Hand
Tool
Part No.
91529-1
91522-1
1 Duplex
Finish — Plated with .000030 [.000762] min. gold in mating area and .000100 [.00254] min. tin in crimping area over
.000050 [.00127] min. nickel underplate on entire contact.
2 HDM Applicator part number ending in -1 is used on AMPOMATOR CLS Machine with T or G Terminators, -2 is used on
AMP-O-LECTRIC Model K Machine, -3 is used on AMP-O-ELECTRIC Model G Machine. See pages 207-210 for further information.
3 HDM Applicator part number ending in -3 is used on AMPOMATOR CLS Machine with T or G Terminators, -4 is used on
AMP-O-LECTRIC Model K Machine, -5 is used on AMP-O-LECTRIC Model G Machine. See pages 207-210 for further information.
Note: Ganged Wire Seals are available; contact Technical Support.
96
Catalog 82181
Revised 4-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
Soft Shell
Pin and Socket Connectors
AMP
Mini-Universal MATE-N-LOK Connectors (Continued)
New: Mini Universal
Gang Seals
No Seal Crimping
Required!
Interface Seals
.38± 0.10
± 0.10
.38
[9.68
0.25]
[9.68 ±±0.25]
.032
Max
[0.8]
Dim A
± .010
[± 0.25]
High Density
.386 ± .010
[9.8 ± 0.25]
.163
[4.14]
.294± ±
0.10
.294
0.10
[7.47±±0.25]
0.25]
[7.47
Dim B
Interface
Seals
Gang
Wire Seal
Plug
for Sealing
Cap
for Sealing
2
4
6
8
10
16
794772-2
794772-4
794772-6
794772-8
1-794772-0
1-1586362-6
1586359-2
1586359-4
1586359-6
1586359-8
1-1586359-0
1-1586359-6
794894-1
794805-1
794895-1
794821-1
794781-1
794824-1
794896-1
794939-1
794940-1
794941-1
794942-1
—
Vertical
Headers
for Sealing*
1-770872-X
1-770874-X
1-770875-X
1-794073-X
1-770858-X
1-794075-X
Right Angle
Headers
for Sealing*
1-770966-X
1-770968-X
1-770969-X
1-770970-X
1-770971-X
1-770974-X
Mini-Universal MATE-N-LOK Sealed Connector System
.163 [4.14] Centerline
Number of
Positions
*-0 for tin finish, -1 for duplex. See Mini-Universal MATE-N-LOK section for details
Gang Wire Seal Contacts
Wire Size
Range
Insulation
Range
16 AWG
.050 - .083
18 - 22 AWG
.050 - .083
22 - 26 AWG
.050 - .069
Material
Finish
Brass, Pre-tin
Brass, Duplex1
Brass, Pre-tin
Brass, Duplex
Brass, Pre-tin
Brass, Duplex1
Pin
Strip Form
Loose Piece
1586537-1
—
1586537-3
—
794440-1
—
794440-3
—
770901-1
770985-1
1-770901-0 1-770985-0
Socket
Strip Form
Loose Piece
1586538-1
—
1586538-3
—
794831-1
—
794831-3
—
770902-1
770986-1
1-770902-0 1-770986-0
1 Duplex
Finish — Plated with .000030 [.000762] min. gold in mating area and .000100 [.00254] min. tin in crimping area over
.000050 [.00127] min. nickel underplate on entire contact.
97
Catalog 82181
Revised 4-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
Soft Shell
Pin and Socket Connectors
AMP
Engineering Notes
98
Catalog 82181
Revised 4-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
Soft Shell
Pin and Socket Connectors
AMP
Mini-Universal MATE-N-LOK 2 Connectors
Product Facts
One molded piece, secondary locking plug and cap
housing assemblies
■
Three-point stabilization to
provide better terminal
position
■
Fully polarized to provide
proper plug-to-cap mating
■
Lanceless contacts for
tangle-free handling
■
Toolless contact removal
■
Tin or duplex gold plated
contacts
■
Available in 2 through 24
circuit sizes wire-to-wire
and wire-to-board
■
Mates with standard MiniUniversal MATE-N-LOK
headers and connectors
■
Contacts available in strip
and loose piece
■
Polarized housings available
in UL 94V-0 or UL 94V-2
flammability rated material
Performance Characteristics
Mini-Universal MATE-N-LOK 2
pins and sockets can be
intermixed in Mini-Universal
MATE-N-LOK 2 housings
The Mini-Universal MATE-N-LOK 2
Connector performance characteristics
found on pages 99-100 are based on
free-hanging connectors, loaded with
contacts crimped on stranded wire.
■
Mini-Universal MATE-N-LOK 2
pins and sockets can not be
used in standard MiniUniversal MATE-N-LOK
housings
Low Level Termination Resistance
20 milliohms max. total resistance
between wire crimps of a mated pin and
socket
■
Contacts accept wire
size range 30-16 AWG
[.05-1.2 mm2]
Dielectric Withstanding Voltage
1500 V AC or DC between adjacent
circuits at sea level
■
.163 [4.14] centerline spacing
Insulation Resistance—
100 megohms minimum between
adjacent circuits
■
Not for interrupting current
Voltage Rating—600 V AC or DC
■
Recognized under the
Component
Program of
Underwriters Laboratories
Inc. to US and Canadian
Standards, File No. E28476
Contact Retention—15 lb. min.
per contact
Durability—25 cycles, mating and
unmating
Current Rating—up to 10.5 amps
per circuit; 2 position
Mating Force—2.5 lb. max. per circuit
Unmating Force—0.25 lb. minimum
per circuit
Wire Size
AWG
mm2
30
28
26
24
22
20
18
16
.05
.08
.12
.2
.3
.5
.8
1.2
Termination
Resistance
Test
Resistance
Current
Milliohms
(Amps)
(Max. Init.)
—
—
—
—
—
—
—
—
Technical Documents
Product Specifications
108-1693 Mini-Universal MATE-N-LOK 2
Connectors
108-1694 Mini-Universal MATE-N-LOK 2
Headers
Application Specification
114-1111 Mini-Universal MATE-N-LOK 2
Connectors
Instruction Sheet
408-3393 Mini-Universal MATE-N-LOK 2
Connectors
—
—
—
—
—
—
—
—
Mini-Universal MATE-N-LOK 2 Connectors
.163 [4.14] Centerline
■
High Density
■
Contact
Crimp
Tensile Force
Force (Min.)
lbs.
N
—
—
—
—
4
18
—
—
11
49
13
58
15
67
18
80
Mini-Universal MATE-N-LOK 2 connectors also will withstand the following tests:
Housing Lock Strength—6 lb. min.
Thermal Shock— -55°C to +105°C
Temperature-Humidity Cycling—
25°C to 65°C at 95 RH
Vibration—10-55-10 cycles per
minute at .06 inch total excursion
Physical Shock—18 drops,
50 G half-sine at 11 milliseconds
99
Catalog 82181
Revised 4-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
Soft Shell
Pin and Socket Connectors
AMP
Mini-Universal MATE-N-LOK 2 Connectors (Continued)
Current Rating Verification for 30°C Maximum Temperature Rise 100% Energized
Mini-Universal MATE-N-LOK 2 Connectors
.163 [4.14] Centerline
High Density
Maximum Current—Maximum
current rating of Mini-Universal
MATE-N-LOK 2 connectors is limited by
the maximum operating temperature of
the housings which is 105°C (gold) or
85°C (tin) including the temperature rise
of the contacts which is a maximum of
30°C. There are several variables which
have a direct effect on this maximum
current-carrying capability for a given
connector and must be considered for
each application. These variables are:
Wire Size—Larger diameter wire will
carry more current since it has less
internal resistance to current flow and
thus generates less heat. Longer wire
lengths also enhance current-carrying
capabilities since the wire conducts heat
away from the connector.
Connector Size—In general, the more
circuits in a connector, the less current
can be carried.
Ambient Temperature—The higher
the ambient temperature, the less current
can be carried in any given connector.
Printed Wiring Board Conductor
Size—The finished trace conductor
width and thickness should be maximized to allow for the greatest currentcarrying capacity and heat dissipation.
2 Circuit Connector (Wire-to-Wire)
Temperature Rise (Degrees C)
30
30
25
20
15
10
5
0
15
18 AWG
10.5
Amps
max.
Current Rating (Amperes)
Current is limited above 75° C so
as not to exceed 105° C (maximum
operating temperature) once the
t–rise is added to the ambient
10
6.75
Amps
max.
24 AWG
5
0
-55
-45
-35
40
50
60
70
75
80
90
100
105
110
Ambient Temperature (Degrees C)
6 Circuit Connector (Wire-to-Wire)
30
30
Temperature Rise (Degrees C)
25
20
15
10
5
0
15
Current is limited above 75° C so
as not to exceed 105° C (maximum
operating temperature) once the
t–rise is added to the ambient
7.5
Amps
max.
10
18 AWG
5
5
Amps
max.
24 AWG
Current Rating (Amperes)
Performance
Characteristics (Continued)
0
-55
-45
-35
40
50
60
70
75
80
90
100
105
110
Ambient Temperature (Degrees C)
Contacts
.775
[19.69]
.775
[19.69]
Pin diameter .039 [0.99]
Material
Brass
Stock Thickness .010 [0.25]
These contacts can be used in either
Mini-Universal MATE-N-LOK 2 Plug or
Cap housings only.
Related Product Data
Product Specifications
108-1693 Mini-Universal MATE-N-LOK 2
Connectors
108-1694 Mini-Universal MATE-N-LOK 2
Headers
Application Specification
114-1111 Mini-Universal MATE-N-LOK 2
Connectors
Performance Characteristics—
pages 99-100
Housings — pages 101-102
Technical Documents— pages 99
and 205-206
Pin
Socket
Not to be used with Mini-Universal MATE-N-LOK Connectors
Contact Part Numbers
Socket
Loose
Strip
Loose
Piece
Form
Piece
HDM
Applicator
Part No.
Wire Size
Range
AWG [mm2]
Ins. Dia.
Range
30 -26
[.05 -.12]
.035 -.050
.889 -1.27
Pre-tin
794216-1
Duplex1
1-794216-0
26 -22
[.12 -.3]
.047 -.069
1.19 -1.75
Pre-tin
794218-1
Duplex1
1-794218-0
22 -18
[.3 -.8]
.059 -.094
1.50 -2.39
Pre-tin
794220-1
Duplex1
1-794220-0
1-794228-0 1-794221-0 1-794229-0
567418-12
567418-22
567418-32
567066-33
567066-43
567066-53
680854-12
680854-22
680854-32
20-16
[.5-1.2]
.079 -.126
2.01-3.20
Pre-tin
Duplex1
794222-1
1-794222-0
794230-1
794223-1
794231-1
1-794230-0 1-794223-0 1-794231-0
680582-22
680582-32
Finish
Pin
Strip
Form
794224-1
794217-1
794225-1
1-794224-0 1-794217-0 1-794225-0
794226-1
794219-1
794227-1
1-794226-0 1-794219-0 1-794227-0
794228-1
794221-1
794229-1
Hand
Tool
Part No.
90717-2
91529-1
91522-1
91594-1
1Duplex
Finish — Plated with .000030 [.000762] min. gold in mating area and .000100 [.00254] min. tin in
crimping area over .000050 [.00127] min. nickel underplate on entire contact.
2HDM Applicator part number ending in -1 is used on AMPOMATOR CLS Machine with T or G Terminators, -2 is used
on AMP-O-LECTRIC Model K Machine, -3 is used on AMP-O-ELECTRIC Model G Machine.
3HDM Applicator part number ending in -3 is used on AMPOMATOR CLS Machine with T or G Terminators, -4 is used
on AMP-O-LECTRIC Model K Machine, -5 is used on AMP-O-LECTRIC Model G Machine.
See pages 207-210 for further information.
Note: All part numbers are RoHS Compliant.
100
Catalog 82181
Revised 4-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
Soft Shell
Pin and Socket Connectors
AMP
Mini-Universal MATE-N-LOK 2 Connectors (Continued)
Housings
2 and 3 Circuit, In-Line
Free-Hanging
.163 [4.14] Centerline spacing
.679
[17.25]
Max.
.163
[4.14]
Related Product Data
.345
[8.76]
.935
[23.75]
Max.
A
Max.
A
Max.
.965
[24.51]
Max.
Cap
Plug
.844
[21.44]
.163
[4.14]
.965
[24.51]
Max.
Cap
Housing Part Numbers
UL94V-0 Nylon, White Color
UL94V-2 Nylon, Natural Color
Plug
Cap
Plug
Cap
A
Dimension
.405
10.29
.405
10.29
3
Mini-Universal MATE-N-LOK 2 Connectors
.163 [4.14] Centerline
A
Max.
Plug
2
.736
[18.69]
Max.
.163
[4.14]
.345
[8.76]
.935
[23.75]
Max.
A
Max.
Number
of
Circuits
.571
[14.50]
Max.
High Density
Product Specifications
108-1693 Mini-Universal MATE-N-LOK 2
Connectors
108-1694 Mini-Universal MATE-N-LOK 2
Headers
Performance Characteristics—
pages 99-100
Contacts — page 100
Technical Documents— pages 99
and 205-206
Mating Headers—pages 103-105
.163
[4.14]
794184-1
794185-1
794237-1
794238-1
794186-1
794187-1
794239-1
794240-1
4 and 6 Circuit, Dual Row
.679
[17.25]
Max.
.163
[4.14]
.163
[4.14]
.345
[8.76]
.935
[23.75]
Max.
A Max.
.571
[14.50]
Max.
Plug
Number
of
Circuits
4
6
Keying Plug
.965
[24.51]
Max.
A Max.
Cap
Housing Part Numbers
UL94V-0 Nylon, White Color
UL94V-2 Nylon, Natural Color
Plug
Cap
Plug
Cap
A
Dimension
.571
14.50
.736
18.70
794188-1
794189-1
794241-1
794242-1
794190-1
794191-1
794243-1
794244-1
.098
[2.49]
.098
[2.49]
Material
UL94V-0 Nylon, white color
.065
[1.65]
.920
[23.37]
.070
[1.78]
Part Number 794369-1
Note: All part numbers are RoHS Compliant.
101
Catalog 82181
Revised 4-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
Soft Shell
Pin and Socket Connectors
AMP
Mini-Universal MATE-N-LOK 2 Connectors (Continued)
Housings
9, 12 and 15 Circuit,
Matrix
Free-Hanging
.163 [4.14] Centerline spacing
.844
[21.44]
Max.
Related Product Data
High Density
Product Specifications
108-1693 Mini-Universal MATE-N-LOK 2
Connectors
108-1694 Mini-Universal MATE-N-LOK 2
Headers
Performance Characteristics—
pages 99-100
Contacts—page 100
Keying Plug—page 101
Technical Documents— pages 99
and 205-206
Mating Headers—pages 103-105
.345
[8.76]
.935
[23.75]
Max.
Number
of
Circuits
Plug
15
A
Max.
Cap
Housing Part Numbers
UL94V-0 Nylon, White Color
UL94V-2 Nylon, Natural Color
Plug
Cap
Plug
Cap
.736
18.69
.901
22.89
1.067
27.10
9
.965
[24.51]
Max.
A
Max.
A
Dimension
12
Mini-Universal MATE-N-LOK 2 Connectors
.163 [4.14] Centerline
.736
[18.69]
Max.
794194-1
794195-1
794247-1
794248-1
794200-1
794201-1
794253-1
794254-1
794204-1
794205-1
794257-1
794258-1
8 through 24 Circuit,
Dual Row
.571
Max.
[14.50]
.163
[4.14]
.163
[4.14]
A
Max.
.965
Max.
[24.51]
Cap
.679
Max.
[17.25]
.163
[4.14]
.163
[4.14]
.345
[8.76]
.935
Max.
[23.75]
A
Max.
Plug
Number
of
Circuits
8
10
12
14
16
18
20
22
24
A
Dimension
.899
22.84
1.062
26.98
1.225
31.12
1.388
35.26
1.551
39.40
1.714
43.54
1.877
47.68
2.040
51.82
2.203
55.96
Housing Part Numbers
UL94V-0 Nylon, White Color
UL94V-2 Nylon, Natural Color
Plug
Cap
Plug
Cap
794192-1
794193-1
794245-1
794246-1
794196-1
794197-1
794249-1
794250-1
794198-1
794199-1
794251-1
794252-1
794202-1
794203-1
794255-1
794256-1
794206-1
794207-1
794259-1
794260-1
794208-1
794209-1
794261-1
794262-1
794210-1
794211-1
794263-1
794264-1
794212-1
794213-1
794265-1
794266-1
794214-1
794215-1
794267-1
794268-1
Note: All part numbers are RoHS Compliant.
102
Catalog 82181
Revised 4-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
Soft Shell
Pin and Socket Connectors
AMP
Mini-Universal MATE-N-LOK 2 Connectors (Continued)
Vertical PC Board
Pin Headers
4, 6, 8, 10 and 12 Circuit, Dual Row
2 and 3 Circuit, In-Line
.220
[5.58]
.163 [4.14] Centerline spacing
.531
[13.49]
.175
[4.44]
A
.030
[0.76]
Material
.387
[9.83]
A
Housing — Nylon, white
Flammability Rating— UL94V-0
Contacts — Brass
Solder tail diameter .039 [1.00]
.030
[.762]
.175
[4.44]
.531
[13.49]
9, 12 and 15 Circuit, Matrix
14, 16, 18, 20, 22 and 24 Circuit, Dual Row
A
A
Related Product Data
.550
[13.97]
.387
[9.83]
.030
[.762]
.175
[4.44]
.531
[13.49]
Style
A
Dim.
Pin
Finish
Mating Connectors
2
In-Line
.387
9.83
Mini-Universal MATE-N-LOK 2
Plug Housings— pages 101-102
3
In-Line
.550
13.97
Mini-Universal MATE-N-LOK
Plug Housings— pages 87-89
4
Dual Row
.387
9.83
6
Dual Row
.550
13.97
8
Dual Row
.713
18.11
9
Matrix
.551
14.00
10
Dual Row
.877
22.28
Dual Row
1.039
26.39
Matrix
.713
18.11
14
Dual Row
1.202
30.53
15
Matrix
.877
22.28
16
Dual Row
1.365
34.67
18
Dual Row
1.528
38.81
20
Dual Row
1.691
42.95
22
Dual Row
1.854
47.09
24
Dual Row
2.017
51.23
Tin1
Duplex2
Tin1
Duplex2
Tin1
Duplex2
Tin1
Duplex2
Tin1
Duplex2
Tin1
Duplex2
Tin1
Duplex2
Tin1
Duplex2
Tin1
Duplex2
Tin1
Duplex2
Tin1
Duplex2
Tin1
Duplex2
Tin1
Duplex2
Tin1
Duplex2
Tin1
Duplex2
Tin1
Duplex2
12
Vertical Pin Header Part Numbers
With
Without
Drain Holes
Drain Holes
1-770166-0
1-770166-1
1-770170-0
1-770170-1
1-770174-0
1-770174-1
1-770178-0
1-770178-1
1-794065-0
1-794065-1
1-770182-0
1-770182-1
1-770743-0
1-770743-1
1-794066-0
1-794066-1
1-770186-0
1-770186-1
1-794067-0
1-794067-1
1-770190-0
1-770190-1
1-794068-0
1-794068-1
1-794069-0
1-794069-1
1-794070-0
1-794070-1
1-794071-0
1-794071-1
1-794072-0
1-794072-1
1-770872-0
1-770872-1
1-770873-0
1-770873-1
1-770874-0
1-770874-1
1-770875-0
1-770875-1
1-794073-0
1-794073-1
1-770876-0
1-770876-1
1-770858-0
1-770858-1
1-770621-0
1-770621-1
1-794040-0
1-794040-1
1-794074-0
1-794074-1
1-770859-0
1-770859-1
1-794075-0
1-794075-1
1-794076-0
1-794076-1
1-794077-0
1-794077-1
1-794078-0
1-794078-1
1-794079-0
1-794079-1
.030
[.762]
.175
[4.44]
Mates with Plug Housing
Part Number
(Using Socket Contacts)
Mini-Universal Mini-Universal
MATE-N-LOK MATE-N-LOK 2
172165-1
794184-1
172166-1
794186-1
172167-1
794188-1
172168-1
794190-1
770579-1
794192-1
172169-1
794194-1
770580-1
794196-1
770581-1
794198-1
172170-1
794200-1
770582-1
794202-1
172171-1
794204-1
770583-1
794206-1
770584-1
794208-1
770585-1
794210-1
770586-1
794212-1
770587-1
794214-1
Mini-Universal MATE-N-LOK 2 Connectors
.163 [4.14] Centerline
Number of
Circuits
.531
[13.49]
1Tin
Finish — Plated with .000150 [.00381] min. tin over .000050 [.00127] min. nickel underplate on entire contact.
Finish — Plated with .000030 [.000762] min. gold in mating area and matte tin on solder tail end over
.000050 [.00127] min. nickel underplate on entire contact.
2Duplex
Note: All part numbers are RoHS Compliant.
103
Catalog 82181
Revised 4-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
High Density
Product Specifications
108-1693 Mini-Universal MATE-N-LOK 2
Connectors
108-1694 Mini-Universal MATE-N-LOK 2
Headers
Performance Characteristics—
pages 99-100
Recommended PC Board Hole
Layout—page 106
Technical Documents— pages 99
and 205-206
Soft Shell
Pin and Socket Connectors
AMP
Mini-Universal MATE-N-LOK 2 Connectors (Continued)
Vertical PC Board
Blindmate Pin Headers
4, 6, 8 and 10 Circuit,
Dual Row
A
.163 [4.14] Centerline spacing
.645
[16.38]
Material
.640
[16.26]
.030
[0.76]
.215
[5.46]
.640
[16.26]
.030
[0.76]
.215
[5.46]
Housing — Nylon, white
Flammability Rating — UL94V-0
Contacts — Brass
Solder tail diameter .039 [1.00]
High Density
Related Product Data
Mini-Universal MATE-N-LOK 2 Connectors
.163 [4.14] Centerline
Product Specifications
108-1693 Mini-Universal MATE-N-LOK 2
Connectors
108-1694 Mini-Universal MATE-N-LOK 2
Headers
Performance Characteristics—
pages 99-100
Recommended PC Board Hole
Layout—page 106
Technical Documents— pages 99
and 205-206
A
9, 12 and 15 Circuit,
Matrix
.808
[20.52]
Number of
Circuits
4
Style
A
Dim.
Pin
Finish
Pin Header Part Numbers
with Drain Holes
Dual Row
.645
16.38
Tin1
1-794325-0
Duplex2
1-794325-1
Tin1
1-794326-0
Mating Connectors
Mini-Universal MATE-N-LOK 2
Plug Housings— pages 101-102
Mini-Universal MATE-N-LOK
Plug Housings— pages 87-89
6
Dual Row
.808
20.52
Duplex2
1-794326-1
8
Dual Row
.971
24.66
Tin1
1-794327-0
Duplex2
1-794327-1
Tin1
1-794432-0
9
Matrix
.808
20.52
Duplex2
1-794432-1
10
Dual Row
1.134
28.80
Tin1
1-794328-0
Duplex2
1-794328-1
12
Matrix
.971
24.66
Tin1
1-794329-0
Duplex2
1-794329-1
Tin1
1-794330-0
Duplex2
1-794330-1
15
Matrix
1.134
28.80
Mates with Plug Housing
Part Number
(Using Socket Contacts)
Mini-Universal Mini-Universal
MATE-N-LOK MATE-N-LOK 2
172167-1
794188-1
172168-1
794190-1
770579-1
794192-1
172169-1
794194-1
770580-1
794196-1
172170-1
794200-1
172171-1
794204-1
1Tin
Finish — Plated with .000150 [.00381] min. tin over .000050 [.00127] min. nickel underplate on entire contact.
Finish — Plated with .000030 [.000762] min. gold in mating area and matte tin on solder tail end over
.000050 [.00127] min. nickel underplate on entire contact.
2Duplex
Note: All part numbers are RoHS Compliant.
104
Catalog 82181
Revised 4-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
Soft Shell
Pin and Socket Connectors
AMP
Mini-Universal MATE-N-LOK 2 Connectors (Continued)
Right-Angle PC Board
Pin Headers
With Board Lock Feature
4, 6, 8, 10 and 12 Circuit, Dual Row
2 and 3 Circuit, In-Line
.163 [4.14] Centerline spacing
.500
[12.70]
.145
[3.68]
Material
.500
[12.70]
A
.030
[0.76]
.145
[3.68]
Housing — Nylon, white color
A
.030
[0.76]
.225
[5.72]
Flammability Rating — UL94V-0
.236
[5.99]
.270
[6.86]
Contacts — Brass
.386
[9.80]
.270
[6.86]
Solder tail diameter .039 [1.00]
.236
[5.99]
14, 16, 18, 20, 22 and 24 Circuit, Dual Row
.500
[12.70]
Mating Connectors
Mini-Universal MATE-N-LOK 2
Plug Housings— pages 101-102
A
.030
[0.76]
.145
[3.68]
.270
[6.86]
.386
[9.80]
.236
[5.99]
Number of
Circuits
Style
A
Dim.
Pin
Finish
Pin Header
Part Number
with Board Lock
2
In-line
.388
9.86
3
In-line
.551
14.00
4
Dual Row
.388
9.86
6
Dual Row
.551
14.00
8
Dual Row
.714
18.14
10
Dual Row
.877
22.28
12
Dual Row
1.040
26.42
14
Dual Row
1.203
30.56
16
Dual Row
1.366
34.70
18
Dual Row
1.529
38.84
20
Dual Row
1.692
42.98
22
Dual Row
1.855
47.12
24
Dual Row
2.018
51.26
Tin1
Duplex2
Tin1
Duplex2
Tin1
Duplex2
Tin1
Duplex2
Tin1
Duplex2
Tin1
Duplex2
Tin1
Duplex2
Tin1
Duplex2
Tin1
Duplex2
Tin1
Duplex2
Tin1
Duplex2
Tin1
Duplex2
Tin1
Duplex2
1-770966-0
1-770966-1
1-770967-0
1-770967-1
1-770968-0
1-770968-1
1-770969-0
1-770969-1
1-770970-0
1-770970-1
1-770971-0
1-770971-1
1-770972-0
1-770972-1
1-770973-0
1-770973-1
1-770974-0
1-770974-1
1-794105-0
1-794105-1
1-794106-0
1-794106-1
1-794107-0
1-794107-1
1-794108-0
1-794108-1
Mini-Universal MATE-N-LOK
Plug Housings— pages 87-89
Mini-Universal MATE-N-LOK 2 Connectors
.163 [4.14] Centerline
Product Specification
108-1694 Mini-Universal MATE-N-LOK 2
Headers
Performance Characteristics—
pages 99-100
Recommended PC Board Hole
Layout— page 106
Technical Documents— pages 99
and 205-206
High Density
Related Product Data
Mates with Plug Housing
Part Number
(Using Socket Contacts)
Mini-Universal Mini-Universal
MATE-N-LOK MATE-N-LOK 2
172165-1
794184-1
172166-1
794186-1
172167-1
794188-1
172168-1
794190-1
770579-1
794192-1
770580-1
794196-1
770581-1
794198-1
770582-1
794202-1
770583-1
794206-1
770584-1
794208-1
770585-1
794210-1
770586-1
794212-1
770587-1
794214-1
1Tin
Finish — Plated with .000150 [.00381] min. tin over .000050 [.00127] min. nickel underplate on entire contact.
Finish — Plated with .000030 [.000762] min. gold in mating area and matte tin on solder tail end over
.000050 [.00127] min. nickel underplate on entire contact.
2Duplex
Note: All part numbers are RoHS Compliant.
105
Catalog 82181
Revised 4-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
Soft Shell
Pin and Socket Connectors
AMP
Mini-Universal MATE-N-LOK 2 Connectors (Continued)
2 and 3 Circuit, In-Line
Recommended PC Board
Hole Layouts for Vertical
and Blindmate Headers
.062 [1.57] thick board, tolerances
non-accumulative
.175
[4.44]
.175
[4.44]
.125
Dia.
[3.18]
.055 Dia.
[1.40] Typ.
Related Product Data
4, 6, 8, 10 and 12 Circuit,
Dual Row
.163
Typ.
[4.14]
High Density
9, 12 and 15 Circuit, Matrix
14, 16, 18, 20, 22 and 24 Circuit, Dual Row
.055 ± .003
Typ.
[1.40 ± .076]
.125
Dia.
[3.18]
.055 Dia.
[1.40] Typ.
Mini-Universal MATE-N-LOK 2 Connectors
.163 [4.14] Centerline
2 Circuit
.163 [4.14]
Related Product Data
Right-Angle Headers— page 105
4, 8 and 12 Circuit
3 Circuit
.0815
[2.070]
2 Plc.
.289
[7.34]
.055
Dia.
[1.40]
Typ.
2 Plc.
.152
Dia.
[3.86]
.209
[5.33]
.163
[4.14]
.055
Dia.
[1.40]
Typ.
3 Plc.
.289
[7.34]
.152
Dia.
[3.86]
.163
[4.14]
.289
[7.34]
.163
Typ.
[4.14]
.163
[4.14]
.152
[3.86]
Dia. 2 Plc.
.055
Dia.
[1.40]
Typ.
.489
[12.42]
2 Plc.
.326
[8.280]
2 Plc.
.209
[5.33]
16, 20 and 24 Circuit
.163
Typ.
[4.14]
.152
[3.86] Dia.
2 Plc.
.055
Dia.
[1.40]
Typ.
.289
[7.34]
22 Circuit
.289
[7.34]
.209
[5.33]
14 and 18 Circuit
.209
[5.33]
.163
[4.14]
.163
Typ.
[4.14]
.055
Dia.
[1.40]
Typ.
.152
Dia.
[3.86]
.209
[5.33]
.163
Typ.
[4.14]
.055
Dia.
[1.40]
Typ.
.152
Dia.
[3.86]
.0815
[2.070]
4 Plc.
.289
[7.34]
6 and 10 Circuit
.163
[4.14]
.163
[4.14]
.163
Typ.
[4.14]
.125
[3.18]
2 Plcs.
.163
Typ.
[4.14]
.062 [1.57] thick board, tolerances
non-accumulative
.175
[4.45]
.175
[4.45]
.163
Typ.
[4.14]
Recommended PC Board
Hole Layouts for RightAngle Headers
.163
[4.14]
.163
[4.14]
Typ.
Vertical Headers— pages 103-104
.175
[4.44]
.125
Dia.
[3.18]
.055 Dia.
[1.40] Typ.
.209
[5.33]
.163
[4.14]
.0815
[2.070]
4 Plc.
.163
Typ.
[4.14]
.289
[7.34]
.152
Dia.
[3.86]
2 Plc.
.407
[10.35]
2 Plc.
.055
Dia.
[1.40]
Typ.
.209
[5.33]
106
Catalog 82181
Revised 4-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
Soft Shell
Pin and Socket Connectors
AMP
Mini-Universal MATE-N-LOK 2 Connectors (Continued)
Mini-Universal
MATE-N-LOK 2 Connector
Mating Combinations
Connector Part Number
Number Flammability
of
Rating
Circuits
2
3
4
8
10
Cap1
Housing
Part No.
UL94V-2
In-Line
794237-1
794238-1
UL94V-0
In-Line
794184-1
794185-1
UL94V-2
In-Line
794239-1
794240-1
UL94V-0
In-Line
794186-1
794187-1
UL94V-2
Dual Row 794241-1
794242-1
UL94V-0
Dual Row 794188-1
794189-1
UL94V-2
Dual Row 794243-1
794244-1
UL94V-0
Dual Row 794190-1
794191-1
UL94V-2
Dual Row 794245-1
794246-1
UL94V-0
Dual Row 794192-1
794193-1
UL94V-2
Matrix
794247-1
794248-1
UL94V-0
Matrix
794194-1
794195-1
UL94V-2
Dual Row 794249-1
794250-1
UL94V-0
Dual Row 794196-1
794197-1
UL94V-2
Matrix 794253-1
Dual Row 794251-1
794254-1
794252-1
12
Matrix
794200-1
794201-1
Dual Row 794198-1
794199-1
UL94V-0
14
15
16
18
20
22
24
UL94V-2
Dual Row 794255-1
794256-1
UL94V-0
Dual Row 794202-1
794203-1
UL94V-2
Matrix
794257-1
794258-1
UL94V-0
Matrix
794204-1
794205-1
UL94V-2
Dual Row 794259-1
794260-1
UL94V-0
Dual Row 794206-1
794207-1
UL94V-2
Dual Row 794261-1
794262-1
UL94V-0
Dual Row 794208-1
794209-1
UL94V-2
Dual Row 794263-1
794264-1
UL94V-0
Dual Row 794210-1
794211-1
UL94V-2
Dual Row 794265-1
794266-1
UL94V-0
Dual Row 794212-1
794213-1
UL94V-2
Dual Row 794267-1
794268-1
UL94V-0
Dual Row 794214-1
794215-1
Right-Angle
Board
Lock
—
1-770966-0
1-770966-1
—
1-770967-0
1-770967-1
—
1-770968-0
1-770968-1
—
1-770969-0
1-770969-1
—
1-770970-0
1-770970-1
—
—
—
—
1-770971-0
1-770971-1
—
—
—
—
1-770972-0
1-770972-1
—
1-770973-0
1-770973-1
—
—
—
—
1-770974-0
1-770974-1
—
1-794105-0
1-794105-1
—
1-794106-0
1-794106-1
—
1-794107-0
1-794107-1
—
1-794108-0
1-794108-1
Mini-Universal MATE-N-LOK 2 Connectors
.163 [4.14] Centerline
9
Plug1
Housing
Part No.
High Density
6
Style
Mating Connector Part Number
PC Board Pin Headers4
Vertical
Plating
With
Without
Blindmate
Drain Holes Drain Holes
—
—
—
—
Tin3 1-770166-0 1-770872-0
—
Duplex2 1-770166-1 1-770872-1
—
—
—
—
—
Tin3 1-770170-0 1-770873-0
—
Duplex2 1-770170-1 1-770873-1
—
—
—
—
—
Tin3 1-770174-0 1-770874-0 1-794325-0
Duplex2 1-770174-1 1-770874-1 1-794325-1
—
—
—
—
Tin3 1-770178-0 1-770875-0 1-794326-0
Duplex2 1-770178-1 1-770875-1 1-794326-1
—
—
—
—
Tin3 1-794065-0 1-794073-0 1-794327-0
Duplex2 1-794065-1 1-794073-1 1-794327-1
—
—
—
—
Tin3 1-770182-0 1-770876-0 1-794432-0
Duplex2 1-770182-1 1-770876-1 1-794432-1
—
—
—
—
Tin3 1-770743-0 1-770858-0 1-794328-0
Duplex2 1-770743-1 1-770858-1 1-794328-1
—
—
—
—
—
—
—
—
Tin3 1-770186-0 1-794040-0 1-794329-0
Duplex2 1-770186-1 1-794040-1 1-794329-1
—
Tin3 1-794066-0 1-770621-0
Duplex2 1-794066-1 1-770621-1
—
—
—
—
—
Tin3 1-794067-0 1-794074-0
—
Duplex2 1-794067-1 1-794074-1
—
—
—
—
—
Tin3 1-770190-0 1-770859-0 1-794330-0
Duplex2 1-770190-1 1-770859-1 1-794330-1
—
—
—
—
Tin3 1-794068-0 1-794075-0
—
Duplex2 1-794068-1 1-794075-1
—
—
—
—
—
Tin3 1-794069-0 1-794076-0
—
Duplex2 1-794069-1 1-794076-1
—
—
—
—
—
Tin3 1-794070-0 1-794077-0
—
Duplex2 1-794070-1 1-794077-1
—
—
—
—
—
Tin3 1-794071-0 1-794078-0
—
Duplex2 1-794071-1 1-794078-1
—
—
—
—
—
Tin3 1-794072-0 1-794079-0
—
Duplex2 1-794072-1 1-794079-1
—
1Mini-Universal
MATE-N-LOK 2 plug and cap housings accept pin or socket contacts. Use the appropriate contacts in
the plug housing as required by the mating connector. All Plugs and Caps are free-hanging.
2Duplex Finish — Plated with .000030 [.000762] min. gold in mating area and matte tin on solder tail end over
.000050 [.00127] min. nickel underplate on entire contact.
3Tin Finish — Plated with .000150 [.00381] min. tin over .000050 [.00127] min nickel underplate on entire contact.
4All PC Board pin headers have 94V-0 flammability rating and can mate to V-0 or V-2 plug housings.
Note: All part numbers are RoHS Compliant.
107
Catalog 82181
Revised 4-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
Soft Shell
Pin and Socket Connectors
AMP
Engineering Notes
108
Catalog 82181
Revised 4-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
Soft Shell
Pin and Socket Connectors
AMP
(MR) Miniature Rectangular Connectors
Product Facts
■
Either cap or plug housing
can be mounted in same
rectangular panel cutout
without additional hardware
■
UL94V-0 housings
■
Plug and cap design
includes molded-in polarizing feature for proper mating
■
Numbered cavities for easy
circuit identification
■
Egg crate design of plug half
fully encloses socket contacts, reducing shock hazard
■
Molded skirt extension on
cap protects pin contacts
■
Strain reliefs for 6 through
36 positions are available
■
Choice of tin or gold plated
contacts
■
Not for interrupting current
■
Socket solder tail contacts
available for hot side PC
Board mounting
■
High density achieved
through .165 [4.19] contact
centerline spacing
■
Extraction tool removes both
pins and sockets
■
Contacts accept 26-18 AWG
[.12-.8 mm2] wire sizes and
insulation diameters of
.025-.115 [.635-2.92]
■
Same applicator crimps pins
and sockets
■
Vertical PC Board pin headers are available
■
Pin header standoffs on
housings at board interface
facilitates gas venting and
cooling during soldering
■
Performance Characteristics
Technical Documents
The Miniature Rectangular Connector
performance characteristics found on
pages 109-110 are based on free-hanging
and panel mount connectors, loaded
with contacts crimped on stranded wire.
Product Specifications
108-1022 (MR) Miniature Rectangular
Connectors
108-1078 (MR) Miniature Rectangular
Headers
Dielectric Withstanding Voltage
2.5 KVAC between adjacent circuits
Insulation Resistance—
1500 megohms minimum initial between
adjacent circuits
Voltage Rating—250 V AC
(MR) Miniature Rectangular Connectors
.165 [4.20] Centerline
Housings positively lock
to help prevent accidental
disengagement
High Density
■
Application Specification
114-1014 (MR) Miniature Rectangular
Contacts
Instruction Sheet
408-3231 Pin, Socket, Housing,
Contacts, and Accessories
Connector Mating—
Split Pin — 1.0 lb. max. per circuit
Connector Unmating—
Split Pin — .25 lb. min. per circuit
Contact Insertion Force—
1.75 lb. max. per contact
Contact Retention—10 lb. min.
per contact
Durability—25 cycles, mating and
unmating
Recognized under the
Component
Program of
Underwriters Laboratories
Inc., File No. E28476
R
■
Certified by Canadian
Standards Association,
File No. LR 7189
R
109
Catalog 82181
Revised 4-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
Soft Shell
Pin and Socket Connectors
AMP
(MR) Miniature Rectangular Connectors (Continued)
Performance
Characteristics
Current Rating Verification for 30°C Maximum Temperature Rise 100% Energized
(Continued)
Maximum Current—Maximum
current rating of Miniature Rectangular
connectors is limited by the maximum
operating temperature of the housings
which is 105°C including the temperature rise of the contacts which is a
maximum of 30°C. There are several
variables which have a direct effect on
this maximum current-carrying capability for a given connector and must
be considered for each application.
These variables are:
High Density
Wire Size—Larger diameter wire will
carry more current since it has less
internal resistance to current flow and
thus generates less heat. Longer wire
lengths also enhance current-carrying
capabilities since the wire conducts heat
away from the connector.
Wire-to-Wire
MR Calculated Current Table
Number of
Circuits
2
3
4
6
9
12
15
20
24
36
18
9.00
8.50
7.00
6.00
5.00
4.50
4.50
4.00
4.00
3.50
Wire Gauge
22
6.50
6.00
5.50
5.00
4.00
4.00
3.50
3.50
3.00
2.50
20
8.00
7.00
6.50
6.00
5.00
4.50
4.00
4.00
3.50
3.00
24
5.50
5.00
5.00
4.00
4.00
3.50
3.00
3.00
2.50
2.00
26
5.00
4.50
4.00
4.00
3.50
3.00
2.50
2.50
2.00
2.00
Values are based on initial Temperature Rise versus Current Testing and are intended to be a guide in the selection
of a connector family. All applications should be tested by the end user. The values listed are per circuit for fully loaded
housings being 100% energized. Note: All combinations were not tested and this chart contains interpolated and
extrapolated values.
(MR) Miniature Rectangular Connectors
.165 [4.20] Centerline
Connector Size—In general, the more
circuits in a connector, the less current
can be carried.
Ambient Temperature—The higher
the ambient temperature, the less current
can be carried in any given connector.
Minimum Wire Lengths for T-Rise vs. Current Testing
Printed Wiring Board Conductor
Size—The finished trace conductor
width and thickness should be maximized to allow for the greatest currentcarrying capacity and heat dissipation.
AWG
30
28
26
24
20
Min. Length (in.)
2.6
3.2
4.1
5.1
7.8
AWG
18
16
14
12
10
Min. Length (in.)
9.4
11.3
13.7
16.4
19.3
Note: If wire lengths used are less than those listed above, the currentcarrying ability of the system will be reduced due to less heat being
conducted away from the connector. The customer should fully test
all applications.
Miniature Rectangular connectors also
will withstand the following tests:
Vibration—10-55-10 cycles per
minute at .06 inch total excursion
Physical Shock—18 drops, 50 G
sawtooth at 10 milliseconds
Wire-to-Board
Housing Panel Retention—
50 lb. min.
Housing Lock Strength—20 lb. min.
Thermal Shock— -55°C to +85°C
Temperature-Humidity Cycling—
25°C to 65°C at 95 RH
Due to the vast differences in trace geometry and printed circuit board configurations, we are unable to provide a
separate current carrying chart for our printed circuit board header products. However, the above Wire-to-Wire charts
may be used as a guideline for headers if the trace width and thickness is equal to the listed wire gauge. For vertical
headers, only 95% of the Wire-to-Wire value should be used. For right-angle headers, only 75% of the Wire-to-Wire
value should be used. The charted values are only a tool for connector selection and will require the customer to fully
test their application.
Corrosion—48 hr. at 5% salt
concentration
Termination Resistance/Contact Crimp Tensile Force
Related Product Data
Product Specifications
108-1022 (MR) Miniature Rectangular
Connectors
108-1078 (MR) Miniature Rectangular
Headers
Wire Size
AWG
mm2
26
24
22
20
18
Termination
Resistance
Test
Resistance
Current
Milliohms
(Amps)
(Max. Init.)
.12
.2
.3
.5
.8
1
1.5
3
4.5
6
5.00
5.00
4.50
4.00
4.00
Contact
Crimp
Tensile Force
Force (Min.)
lbs.
N
5
22
8
36
14
62
14
62
30
133
Note: This is the total resistance between wire crimps of a mated pin and socket.
110
Catalog 82181
Revised 4-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
Soft Shell
Pin and Socket Connectors
AMP
(MR) Miniature Rectangular Connectors (Continued)
(MR) Miniature Rectangular Connector Mating Combinations
Connector Part Number
Number
of
Circuits
Flammability
Rating
2
UL94V-0
In-Line
1-640507-0
1-640517-0
3
UL94V-0
In-Line
1-640508-0
1-640518-0
4
UL94V-0
Matrix
1-640509-0
1-640519-0
6
UL94V-0
Matrix
1-640510-0
1-640520-0
9
UL94V-0
Matrix
1-640511-0
1-640521-0
12
UL94V-0
Matrix
1-640512-0
1-640522-0
15
UL94V-0
Matrix
1-640513-0
1-640523-0
20
UL94V-0
Matrix
1-640514-0
1-640524-0
24
UL94V-0
Matrix
1-640515-0
1-640525-0
36
UL94V-0
Matrix
1-640516-0
1-640526-0
Mating Connector Part Number
PC Board
Vertical Pin Headers
Plating
Tin
Duplex1
Tin
Duplex1
Tin
Duplex1
Tin
Duplex1
Tin
Duplex1
Tin
Duplex1
Tin
Duplex1
Tin
Duplex1
Tin
Duplex1
Tin
Duplex1
.062 Board
640497-1
2-640497-2
640498-1
2-640498-2
640499-1
2-640499-2
640500-1
2-640500-2
640501-1
2-640501-2
640502-1
2-640502-2
640503-1
2-640503-2
640504-1
2-640504-2
640505-1
2-640505-2
640506-1
2-640506-2
.120 Board
640497-3
2-640497-4
640498-3
2-640498-4
640499-3
2-640499-4
640500-3
2-640500-4
640501-3
2-640501-4
640502-3
2-640502-4
640503-3
2-640503-4
640504-3
2-640504-4
640505-3
2-640505-4
640506-3
2-640506-4
(MR) Miniature Rectangular Connectors
.165 [4.20] Centerline
Socket Housing
(Plug)
Part No.
High Density
Style
Pin Housing
(Cap)
Part No.
1Duplex
Finish — Plated with .000030 [.000762] min. gold in mating area, matte tin on solder tail end over .000050 [.00127] min. nickel underplate on entire
contact.
Note: All part numbers are RoHS Compliant.
111
Catalog 82181
Revised 4-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
Soft Shell
Pin and Socket Connectors
AMP
(MR) Miniature Rectangular Connectors (Continued)
Contacts
.790
[20.06]
Pin diameter .068 [1.73]
.660
[16.76]
Material
Phosphor bronze
Stock thickness .008 [.203]
Standard Socket
Live Split Pin
Contact Part Numbers
High Density
Wire Size
Range
AWG [mm2]
Ins. Dia.
Range
Finish
26-24
[.12-.2]
.025-.050
.635-1.27
Pre-tin
26-182
[.12-.8]
.050-.115
1.27-2.92
Select
Live Split Pin
Gold1
Pre-tin
Select
Gold1
Standard Socket
Strip Form
Loose Piece
Strip Form
Loose Piece
350968-1
640579-1
794000-1
794001-1
350968-2
640579-2
794000-2
794001-2
350967-1
640545-1
641294-1
641300-1
350967-2
640545-2
641294-2
641300-2
HDM
Applicator
Part No.
466352-13
466352-23
466352-33
466351-13
466351-23
466351-43
Hand Tool
Part No.
91534-1
91526-1
1Select
Gold Finish — Plated with .000030 min. [.000762] gold in mating area over .000050 [.00127] min. nickel underplate on entire contact.
CMA maximum.
3HDM Applicator part number ending in -1 is used on AMPOMATOR CLS Machine with T or G Terminators, -2 is used on AMP-O-LECTRIC Model K Machine,
-3 or -4 is used on AMP-O-LECTRIC Model G Machine. See pages 207-210 for further information.
21650
Grounding Pins
(Mate first, break last, not for interrupting
current)
(MR) Miniature Rectangular Connectors
.165 [4.20] Centerline
Pin diameter .068 [1.73]
Stock thickness .008 [.203]
Wire Size
Range
AWG [mm2]
Ins. Dia.
Range
Finish
26-182
[.12-.8]
.050-.115
1.27-2.92
Material
Grounding Pin Part Numbers
Strip Form
Loose Piece
Pre-tin
350969-1
640580-1
Select Gold1
350969-2
640580-2
HDM
Hand Tool
Applicator Part No.
Part No.
466351-13
466351-23 91526-1
466351-43
1Select
Gold Finish—Plated with .000030 [.000762] min. gold in mating area over .000050
[.00127] min. nickel underplate on entire contact.
CMA maximum.
3HDM Applicator part number ending in -1 is used on AMPOMATOR CLS Machine with
T or G Terminators, -2 is used on AMP-O-LECTRIC Model K Machine, -3 or -4 is used
on AMP-O-LECTRIC Model G Machine. See pages 207-210 for further information.
Phosphor bronze
.850
[21.59]
21650
1.00
[25.4]
Solder Tail Socket
.165
Typ.
[4.19]
.165
Typ.
[4.19]
Material and Finish
Phosphor bronze, pre-tin
Stock thickness .008 [.203]
Part Number 350838-1
Note: Recommended for use with
MR Socket Housings
.055
[1.39]
Dia. Typ.
Recommended PC Board Hole Layout
.062 [1.57] or .093 [2.36] thick board
Keying Plug
IS 408-3231
.970
[24.63]
Related Product Data
Product Specification
108-1022 (MR) Miniature Rectangular
Connectors
Application Specification
114-1014 (MR) Miniature Rectangular
Contacts
Performance Characteristics—
pages 109-110
Housings—pages 113-114
Technical Documents— pages 109
and 205-206
Application Tooling— pages 207-210
Part Number 350591-1
UL94V-0 Nylon material
Note: Use in socket housings only.
Contact Extraction Tool
Part No. 455822-2
IS 408-9570
Contact Insertion Tool
(For inserting contacts applied to small diameter wire)
Part No. 455830-1
IS 408-7984
Note: All part numbers are RoHS Compliant.
112
Catalog 82181
Revised 4-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
Soft Shell
Pin and Socket Connectors
AMP
(MR) Miniature Rectangular Connectors (Continued)
Housings
Free-Hanging or Panel Mount
2 and 3 Circuit,
In-Line
1.060
[26.92]
Fingergrip
.435
[11.05]
.165 [4.19] Centerline spacing
.290
[7.37]
Material
1
Nylon, Natural (Color—Brick Red)
A
C
2
Flammability Rating — UL94V-0
3
Related Product Data
Product Specification
108-1022 (MR) Miniature Rectangular
Connectors
Pin Housing (Cap)
.840
[21.34]
.510
.290
[12.95]
[7.37]
High Density
1
B
C
2
3
Positive
Locking Device
Typical Circuit
Identification
Typical Circuit
Identification
Socket Housing (Plug)
Dimensions
Number of
Circuits
A
.455
11.56
.620
15.75
2
3
(MR) Miniature Rectangular Connectors
.165 [4.20] Centerline
Performance Characteristics—
pages 109-110
Panel Cutout Recommendations—
page 115
Contacts—page 112
Keying Plug— page 112
Strain Reliefs— page 116
Commoning Bars—page 116
Technical Documents— pages 109
and 205-206
Mating Headers—pages 117-118
Positive Locking Device
Typical Circuit
Identification
Part Numbers
B
.365
9.27
.530
13.46
C
.755
19.18
.920
23.37
Pin Housing (Cap)
Socket Housing (Plug)
1-640507-0
1-640517-0
1-640508-0
1-640518-0
Note: All part numbers are RoHS Compliant.
4 and 6 Circuit,
Matrix
1.060
[26.92]
Fingergrip
A
.435
[11.05]
.455
[19.18]
.755
[19.18]
Positive Locking
Device
Typical Circuit
Identification
Pin Housing (Cap)
.840
[21.34]
A
.755
[19.18]
.365
[9.27]
Positive Locking
Device
Typical Circuit
Identification
Socket Housing (Plug)
Number of
Circuits
A
Dim.
4
.455
11.56
.620
15.75
6
Part Numbers
Pin Housing (Cap)
Socket Housing (Plug)
1-640509-0
1-640519-0
1-640510-0
1-640520-0
Note: All part numbers are RoHS Compliant.
113
Catalog 82181
Revised 4-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
Soft Shell
Pin and Socket Connectors
AMP
(MR) Miniature Rectangular Connectors (Continued)
Housings
Free-Hanging or Panel Mount
9, 12 and 15 Circuit,
Matrix
1.060
[26.92]
Fingergrip
.435
[11.05]
A
.165 [4.19] Centerline spacing
Material
.920
[23.37]
.620
[15.75]
Nylon, Natural (Color—Brick Red)
Flammability Rating — UL94V-0
Product Specification
108-1022 (MR) Miniature Rectangular
Connectors
High Density
Performance Characteristics—
pages 109-110
Panel Cutout Recommendations—
page 115
Contacts—page 112
Keying Plug— page 112
Strain Reliefs— page 116
Commoning Bars—page 116
Technical Documents— pages 109
and 205-206
Mating Headers—pages 117-118
(MR) Miniature Rectangular Connectors
.165 [4.20] Centerline
Positive Locking Device
Typical Circuit
Identification
Related Product Data
Pin Housing (Cap)
.840
[21.34]
A
Typical Circuit
Identification
.920
[23.37]
.530
[13.46]
Positive Locking Device
Socket Housing (Plug)
20, 24 and 36 Circuit,
Matrix
1.060
[26.92]
Fingergrip
.435
[11.05]
A
1.085
[27.56]
Typical Circuit
Identification
.785
[19.94]
Positive Locking Device
Pin Housing (Cap)
.840
[21.34]
A
.695
[16.51]
1.085
[27.56]
Positive Locking Device
Typical Circuit
Identification
Socket Housing (Plug)
Number of
Circuits
9
12
15
20
24
36
A
Dim.
.620
.785
.950
.950
1.115
1.610
[15.75]
[19.94]
[24.13]
[24.13]
[28.32]
[40.89]
Part Numbers
Pin Housing (Cap)
1-640511-0
1-640512-0
1-640513-0
1-640514-0
1-640515-0
1-640516-0
Socket Housing (Plug)
1-640521-0
1-640522-0
1-640523-0
1-640524-0
1-640525-0
1-640526-0
Note: All part numbers are RoHS Compliant.
114
Catalog 82181
Revised 4-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
Soft Shell
Pin and Socket Connectors
AMP
(MR) Miniature Rectangular Connectors (Continued)
Recommended Panel
Cutouts for Pin and Socket
Housings
F
Related Product Data
Product Specification
108-1022 (MR) Miniature Rectangular
Connectors
Housings— pages 113-114
Technical Documents— pages 109
and 205-206
C
E
D
B
A
High Density
View is from housing entry side
Panel Thickness .068 [1.75] Max.
2
3
4
6
9
12
15
20
24
36
Panel Cutout Dimensions
A
.105
2.67
.105
2.67
.157
3.99
.208
5.28
.208
5.28
.225
5.72
.308
7.82
.308
7.82
.390
9.91
.625
15.86
B
.220
5.59
.220
5.59
.280
5.28
.345
8.76
.345
8.76
.475
12.07
.475
12.07
.475
12.07
.475
12.07
.500
12.70
C
.475
12.07
.640
16.26
.475
12.07
.475
12.07
.640
16.26
.640
16.26
.640
16.26
.805
20.45
.805
20.45
.800
20.32
D
.630
16.00
.795
20.19
.630
16.00
.630
16.00
.795
20.19
.795
20.19
.795
20.19
.960
24.38
.960
24.38
.950
24.13
E
.785
19.94
.950
24.13
.785
19.94
.785
19.94
.950
24.13
.950
24.13
.950
24.13
1.115
28.32
1.115
28.32
1.100
27.94
F
.430
10.92
.430
10.92
.595
15.11
.760
19.30
.760
19.30
.925
23.50
1.090
27.69
1.090
27.69
1.255
31.88
1.750
44.45
(MR) Miniature Rectangular Connectors
.165 [4.20] Centerline
Number of
Circuits
Notes:
1. When mounted in a .060 [1.52] thick panel, the cap’s mating end extends .800 [20.32] beyond the panel front; wire
end extends .220 [55.88] from the panel rear. Plug mating end extends .580 [14.73] beyond the panel front; wire
end extends .220 [55.88] from the panel rear.
2. The panel should be punched so that the housing enters the panel in the same direction as the punch for ease of
assembly.
115
Catalog 82181
Revised 4-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
Soft Shell
Pin and Socket Connectors
AMP
(MR) Miniature Rectangular Connectors (Continued)
Strain Reliefs
One Piece — Clam Shell
Strain Relief
Adapting Grommets
IS 408-3231
(Illustrated in closed position)
IS 408-3231
Material
Material
Flexible PVC (55/75 Durometer) black
color
Nylon, Natural (Color—Brick Red)
Flammability Rating — UL94V-0
I.D.
I.D.
A
B
A
Hinge
Hinge
I.D.
High Density
C
C
B
6, 9, 12, 15 and 20 Circuit
Number of
Circuits
(MR) Miniature Rectangular Connectors
.165 [4.20] Centerline
6
9
12
15
20
24
36
A
B
24 and 36 Circuit
Dimensions
I.D.
.374
9.50
.420
10.67
.420
10.67
.420
10.67
.560
14.22
.560
14.22
.560
14.22
A
.634
16.10
.800
20.32
.790
20.07
.790
20.07
.960
24.38
.900
22.86
.900
22.86
B
.760
19.30
.760
19.30
.925
23.50
1.090
27.69
1.090
27.69
1.255
31.88
1.750
44.45
Part
Numbers
C
1.000
25.4
1.000
25.4
1.000
25.4
1.000
25.4
1.280
23.51
1.280
23.51
1.280
23.51
350373-1
350522-1
Material
6
350374-1
350523-1
9, 12
& 15
480634-1
350524-1
480594-1
Notes:
1. These strain reliefs can be used with either pin or socket housings.
2. Customer supplied: One No. 6 Panhead Type B self-taping screw,
3/8 long. Plating is optional to conform to customer requirements.
3. Strain reliefs are also available in UL94V-2 nylon, black in color. To order
strain reliefs in this material use the appropriate dash numbers: 1-XXXXXX-9.
Commoning Bars
IS 408-3231
Number of
Circuits
20, 24
& 36
A
.375
9.53
.375
9.53
.375
9.53
.375
9.53
.375
9.53
.375
9.53
.500
12.70
.500
12.70
.500
12.70
B
.375
9.53
.375
9.53
.375
9.53
.420
10.67
.420
10.67
.420
10.67
.562
14.27
.562
14.27
.562
14.27
Double
Stack
4 Circuit .635
[16.12]
3 Circuit .470
[11.93]
2 Circuit .305
[7.74]
Brass
Stock thickness .008 [.203]
Dimensions
I.D.
.156
3.96
.218
5.54
.296
7.52
.218
5.54
.250
6.35
.281
7.14
.437
11.10
.375
9.53
.312
7.92
Part
Numbers
2-350377-0
2-350376-0
2-350375-0
2-350378-1
2-350379-1
2-350380-1
2-380935-0
2-380936-0
2-380937-0
Pin
Commoning
Bar
Finish
Pre-tin
Gold1
2 Circuit
350020-1
350020-2
Part Numbers
3 Circuit
350021-1
350021-2
4 Circuit
350022-1
350022-2
1Gold
Finish—Plated with .000030 [.000762] min. gold over .000050 [.00127]
min. nickel underplate on entire contact.
Related Product Data
Housings—pages 113-114
Notes:
1. Commoning bars can be used to common adjacent pin contacts in any column or row. Maximum
stack per pin is two.
2. The above illustrates the proper insertion of the Commoning Bar.
3. Use the mating socket housing to assemble the Commoning Bar onto the pins.
Note: All part numbers are RoHS Compliant.
Commoning Bar Extraction Tool
Part No. 457306-1
IS 408-3231
116
Catalog 82181
Revised 4-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
Soft Shell
Pin and Socket Connectors
AMP
(MR) Miniature Rectangular Connectors (Continued)
PC Board Vertical
Pin Headers
2 and 3 Circuit, In-Line
.165 [4.19] Centerline spacing
.030
[.762]
.055
.290
[7.36]
.530
[13.46]
[1.40]
Dia. Typ.
Material
Housing — Nylon, Natural (Color—
Brick Red)
.150
[3.81]
Flammability Rating — UL94V-0
A
.165
Typ.
[4.19]
Live Pin
Contacts — Phosphor bronze
Solder tail diameter .040 [1.02]
Recommended PC Board Hole Layout
.435
[11.05]
B
Related Product Data
High Density
4 and 6 Circuit, Matrix
.030
[.762]
.530
[13.46]
.150
[3.81]
A
.055
[1.40]
Live Pin
Dia. Typ.
.455
[11.56]
.165
Typ.
[4.19]
.165
[4.19]
.435
[11.05]
B
(MR) Miniature Rectangular Connectors
.165 [4.20] Centerline
Product Specification
108-1078 (MR) Miniature Rectangular
Headers
Dimensions A and B — page 118
Performance Characteristics—
pages 109-110
Technical Documents— pages 109
and 205-206
Mating Socket Housings— pages
113-114
Recommended PC Board Hole Layout
9, 12 and 15 Circuit,
Matrix
.530
[13.46]
.150
[3.81]
.030
[.762]
A
.055
[1.40]
Dia. Typ.
.165
Typ.
[4.19]
.620
[15.75]
Live Pin
.165 Typ.
[4.19]
B
.435
[11.05]
Recommended PC Board Hole Layout
117
Catalog 82181
Revised 4-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
Soft Shell
Pin and Socket Connectors
AMP
(MR) Miniature Rectangular Connectors (Continued)
PC Board Vertical
Pin Headers
20, 24 and 36 Circuit,
Matrix
.165 [4.19] Centerline spacing
.530
[13.46]
.030
[.76]
Material
.150
[3.81]
A
.055
Dia. Typ.
[1.40]
Housing — Nylon, Natural (Color–
Brick Red)
.165
[4.19]
Typ.
Flammability Rating — UL94V-0
Live
Pin
Contacts — Phosphor bronze
Solder tail diameter .040 [1.02]
Related Product Data
High Density
(MR) Miniature Rectangular Connectors
.165 [4.20] Centerline
.165
[4.19]
Typ.
.435
[11.05]
B
Product Specification
108-1078 (MR) Miniature Rectangular
Headers
Dimensions (2 and 3 Circuit, In-Line;
4, 6, 9, 12 and 15 Circuit, Matrix)
— page 118
Performance Characteristics—
pages 109-110
Vertical Pin Headers and
Recommended PC Board Hole
Layouts—pages 117-118
Technical Documents— pages 109
and 205-206
Mating Socket Housings— pages
113-114
.785
[19.94]
Recommended PC Board Hole Layout
Number
of
Circuits
2
In-Line
3
In-Line
4
6
9
12
15
20
24
36
Header Part Numbers
Tin
Duplex
Finish
Finish1
Dimensions
Board
Thickness
A
B
.062
1.57
.120
3.05
.062
1.57
.120
3.05
.062
1.57
.120
3.05
.062
1.57
.120
3.05
.062
1.57
.120
3.05
.062
1.57
.120
3.05
.062
1.57
.120
3.05
.062
1.57
.120
3.05
.062
1.57
.120
3.05
.062
1.57
.120
3.05
.455
11.56
.455
11.56
.620
15.75
.620
15.75
.455
11.56
.455
11.55
.620
15.75
.620
15.75
.620
15.75
.620
15.75
.785
19.94
.785
19.94
.950
24.13
.950
24.13
.950
24.13
.950
24.13
1.115
28.32
1.115
28.32
1.610
40.89
1.610
40.89
.120
3.05
.180
4.57
.120
3.05
.180
4.57
.120
3.05
.180
4.57
.120
3.05
.180
4.57
.120
3.05
.180
4.57
.120
3.05
.180
4.57
.120
3.05
.180
4.57
.120
3.05
.180
4.57
.120
3.05
.180
4.57
.120
3.05
.180
4.57
640497-1
2-640497-2
640497-3
2-640497-4
640498-1
2-640498-2
640498-3
2-640498-4
640499-1
2-640499-2
640499-3
2-640499-4
640500-1
2-640500-2
640500-3
2-640500-4
640501-1
2-640501-2
640501-3
2-640501-4
640502-1
2-640502-2
640502-3
2-640502-4
640503-1
2-640503-2
640503-3
2-640503-4
640504-1
2-640504-2
640504-3
2-640504-4
640505-1
2-640505-2
640505-3
2-640505-4
640506-1
2-640506-2
640506-3
2-640506-4
Mates with
Socket Housing
Part No.
1-640517-0
1-640518-0
1-640519-0
1-640520-0
1-640521-0
1-640522-0
1-640523-0
1-640524-0
1-640525-0
1-640526-0
1Duplex
Finish — Plated with .000030 [.000762] min. gold in mating area, matte tin on solder tail end over .000050
[.00127] min. nickel underplate on entire contact.
Note: All part numbers are RoHS Compliant.
118
Catalog 82181
Revised 4-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
Soft Shell
Pin and Socket Connectors
AMP
VAL-U-LOK Connector System
(Wire-to-Wire, Wire-to-Board and Wire-to-Panel)
Product Facts
Low cost, wire-to-wire,
wire-to-board and wire-topanel connectors with
4.2 mm centerline
■ Easy mate and unmate with
positive latch design
■ Single row, 3-5 positions:
receptacles, panel mount or
free-hanging plugs
■ Double row, 2-24 positions
(even only):
receptacles, panel mount or
free-hanging plugs, and
vertical or right-angle pin
headers
■ Available in UL 94V-2 or
UL 94V-0 flammability rated
nylon
■ Products are lead free to
help promote a cleaner
environment
■ Intermateable and
interchangeable with
Molex Mini-Fit, Jr. and
intermateable AMP-DUAC
connectors
■ Recognized under the
Component Program
of Underwriters Laboratories
Inc., File No. E28476
■ Certified by Canadian
Standards Association,
File No. 208567
■ Tyco Electronics Design For
Environment (DFE) Standard
230-5
■
Performance Characteristics
Material and Finish
Applications
Electrical
Housings—Nylon, UL 94V-2
and UL 94V-0
Contacts—Brass or Phos. Bronze with
tin plating (Lead-Free) or gold plating
■
Voltage—600 VAC
Current—9 amps max. in 2-position
applications
Dielectric Withstanding Voltage—
1500 VAC min.
Insulation Resistance—
1000 megohms min.
Operating Temperature—
–40°C to +105°C [–40°F to +221°F]
Mechanical
Technical Documents
Design Objective
108-2112
Application Specification
114-13172
Engineering Test Report
502-1204
VAL-U-LOK Connector System
.165 [4.20] Centerline
R
High Density
R
Computer
motherboards/power
supplies
■ Harness assemblies used in
the Vending, Gaming and
Appliance industries
■ Car alarm systems
■ Heating systems
Connector Mating—
1.55 lb. [6.90 N] max. per circuit
Connector Unmating—
.11 lb. [.49 N] min. per circuit
Contact Retention—
4.88 lb. [21.71 N] min. per contact
Durability—30 cycles, mating and
unmating
Molex and Mini-Fit are trademarks of Molex Incorporated.
119
Catalog 82181
Revised 4-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
Soft Shell
Pin and Socket Connectors
AMP
VAL-U-LOK Connector System
(Wire-to-Wire, Wire-to-Board and Wire-to-Panel) (Continued)
Contacts
Wire Range
(AWG)
Insulation
Range
26-22
.047 - .069
[1.2 - 1.75]
22-18
.060 - .122
[1.50 - 3.10]
16
.071 - .122
[1.8 - 3.10]
Material &
Finish
Brass, Pre-Tin
Phos. Brz., Pre-Tin
Brass, Gold
Phos. Brz., Gold
Brass, Pre-Tin
Phos. Brz., Pre-Tin
Brass, Gold
Phos. Brz., Gold
Brass, Pre-Tin
Phos. Brz., Pre-Tin
Brass, Gold
Phos. Brz., Gold
Pin
Socket
Strip Form Loose Piece
Strip Form Loose Piece
794957-1
794957-3
794957-2
794957-4
794955-1
794955-3
794955-2
794955-4
1586054-1
1586054-3
1586054-2
1586054-4
794958-1
794958-3
794958-2
794958-4
794956-1
794956-3
794956-2
794956-4
1586055-1
1586055-3
1586055-2
1586055-4
1586316-1
1586316-3
1586316-2
1586316-4
1586314-1
1586314-3
1586314-2
1586314-4
1586840-1
1586840-3
1586840-2
1586840-4
1586317-1
1586317-3
1586317-2
1586317-4
1586315-1
1586315-3
1586315-2
1586315-4
1586841-1
1586841-2
1586841-3
1586841-4
Applicator
Part Number1
PRO-CRIMPER III
Hand Tool
Part Number
1385448-X
91387-1
1852668-X
91388-1
1852294-X
1976444-1
Extraction Tool Part Number 1586343-1
For applicator and machine part numbers, contact Technical Support.
High Density
1
Socket — (used in Receptacle Housing)
.573
[14.55]
Pin — (used in Plug Housing)
.17
[4.4]
VAL-U-LOK Connector System
.165 [4.20] Centerline
.66
[16.8]
.18
[4.6]
.20
[5.0]
.05
[1.3]
.33
[8.5]
.07
[1.9]
.08
[2.0]
.053
[1.35]
.01±.00
[0.2±0.02]
120
Catalog 82181
Revised 4-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
Soft Shell
Pin and Socket Connectors
AMP
VAL-U-LOK Connector System
(Wire-to-Wire, Wire-to-Board and Wire-to-Panel) (Continued)
Housings — Single Row
No. of
Positions
Panel Mount
Plug
1586101-3
1586022-4
1586022-5
3*
4
5
UL 94V-2 Housings
Free-Hanging
Plug
1586103-3
1586024-4
1586024-5
Receptacle
Housing
1586105-3
1586026-4
1586026-5
Panel Mount
Plug
1586102-3
1586023-4
1586023-5
UL 94V-0 Housings
Free-Hanging
Plug
1586104-3
1586025-4
1586025-5
Receptacle
Housing
1586106-3
1586027-4
1586027-5
*Note: 3 position housings are First Mate/Last Break.
Note: All part numbers are RoHS Compliant.
Panel Mount Plug Housing
Receptacle Housing
Free-Hanging Plug Housing
.21 [5.4]
.76 [19.3]
High Density
.81 [20.6]
.543
[13.8]
.543 [13.8]
.165
[4.2] Typ.
.12 [3.0]
.165 [4.2]
Typ.
.17 [4.2] Typ.
VAL-U-LOK Connector System
.165 [4.20] Centerline
.15 [3.7]
.21 [5.4]
.54 [13.8]
Headers — Single Row, Vertical
No. of
3*
4
5
UL 94V-2 Housings
With Drain Holes
Without Drain Holes
2029054-3
2029058-3
2029054-4
2029058-4
2029054-5
2029058-5
UL 94V-0 Housings
With Drain Holes
2029056-3
2029056-4
2029056-5
*Note: 3 position housings are First Mate/Last Break.
Note: All part numbers are RoHS Compliant.
.165 Typ.
[4.2]
Ref.
Position #1
Identification Feature
.213
[5.4]
.138 ± .012
[3.5 ± 0.3]
.492
[12.49]
.504
[12.8]
.107
[2.73]
121
Catalog 82181
Revised 4-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
Soft Shell
Pin and Socket Connectors
AMP
VAL-U-LOK Connector System
(Wire-to-Wire, Wire-to-Board and Wire-to-Panel) (Continued)
Housings — Double Row
No. of
Positions
Panel Mount
Plug
794953-2
794953-4
794953-6
794953-8
1-794953-0
1-794953-2
1-794953-4
1-794953-6
1-794953-8
2-794953-0
2-794953-2
2-794953-4
2
4
6
8
10
12
14
16
18
20
22
24
UL 94V-2 Housings
Free-Hanging
Plug
1586000-2
1586000-4
1586000-6
1586000-8
1-1586000-0
1-1586000-2
1-1586000-4
1-1586000-6
1-1586000-8
2-1586000-0
2-1586000-2
2-1586000-4
Receptacle
Housing
794954-2
794954-4
794954-6
794954-8
1-794954-0
1-794954-2
1-794954-4
1-794954-6
1-794954-8
2-794954-0
2-794954-2
2-794954-4
Panel Mount
Plug
1586018-2
1586018-4
1586018-6
1586018-8
1-1586018-0
1-1586018-2
1-1586018-4
1-1586018-6
1-1586018-8
2-1586018-0
2-1586018-2
2-1586018-4
UL 94V-0 Housings
Free-Hanging
Plug
1586017-2
1586017-4
1586017-6
1586017-8
1-1586017-0
1-1586017-2
1-1586017-4
1-1586017-6
1-1586017-8
2-1586017-0
2-1586017-2
2-1586017-4
Receptacle
Housing
1586019-2
1586019-4
1586019-6
1586019-8
1-1586019-0
1-1586019-2
1-1586019-4
1-1586019-6
1-1586019-8
2-1586019-0
2-1586019-2
2-1586019-4
High Density
Note: Plug housings accept pin contacts and receptacle housings accept socket contacts on page 114.
Note: All part numbers are RoHS Compliant.
Panel Mount Plug Housing
Free-Hanging Plug Housing
Receptacle Housing
VAL-U-LOK Connector System
.165 [4.20] Centerline
.17 [4.2]
.94
[23.9]
.17 [4.2]
.17 [4.2]
.94
[23.9]
.39
[9.8]
.17 [4.2]
Housings — Colored
Color
No. of
Positions
Black
Red
Blue
2-24
4-24
6-24
Panel Mount
Plug
X-2029088-X
X-2029089-X
X-2029095-X
UL 94V-2 Housings
Free-Hanging
Plug
X-2029027-X
X-2029090-X
X-2029096-X
Receptacle
Housing
X-1586075-X
X-2029091-X
X-2029097-X
Panel Mount
Plug
X-2029035-X
X-2029092-X
X-2029098-X
UL 94V-0 Housings
Free-Hanging
Plug
X-2029028-X
X-2029093-X
X-2029099-X
Receptacle
Housing
X-2029029-X
X-2029094-X
X-2029100-X
Note: Plug housings accept pin contacts and receptacle housings accept socket contacts on page 114.
Note: All part numbers are RoHS Compliant.
122
Catalog 82181
Revised 4-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
Soft Shell
Pin and Socket Connectors
AMP
VAL-U-LOK Connector System
(Wire-to-Wire, Wire-to-Board and Wire-to-Panel) (Continued)
Pin Headers
No. of
Positions
w/o Pegs
1586037-2
1586037-4
1586037-6
1586037-8
1-1586037-0
1-1586037-2
1-1586037-4
1-1586037-6
1-1586037-8
2-1586037-0
2-1586037-2
2-1586037-4
2
4
6
8
10
12
14
16
18
20
22
24
UL 94V-2 Pin Headers
Right-Angle
w/Pegs
w/o Pegs
Screw Mount
1586039-2
1586041-2
1586043-2
1586039-4
1586041-4
1586043-4
1586039-6
1586041-6
1586043-6
1586039-8
1586041-8
1586043-8
1-1586039-0
1-1586041-0
1-1586043-0
1-1586039-2
1-1586041-2
1-1586043-2
1-1586039-4
1-1586041-4
1-1586043-4
1-1586039-6
1-1586041-6
1-1586043-6
1-1586039-8
1-1586041-8
1-1586043-8
2-1586039-0
2-1586041-0
2-1586043-0
2-1586039-2
2-1586041-2
2-1586043-2
2-1586039-4
2-1586041-4
2-1586043-4
UL 94V-0 Pin Headers
Vertical
Right-Angle
w/o Pegs
w/Pegs
w/o Pegs
Screw Mount
1586038-2
1586040-2
1586042-2
1586044-2
1586038-4
1586040-4
1586042-4
1586044-4
1586038-6
1586040-6
1586042-6
1586044-6
1586038-8
1586040-8
1586042-8
1586044-8
1-1586038-0
1-1586040-0
1-1586042-0
1-1586044-0
1-1586038-2
1-1586040-2
1-1586042-2
1-1586044-2
1-1586038-4
1-1586040-4
1-1586042-4
1-1586044-4
1-1586038-6
1-1586040-6
1-1586042-6
1-1586044-6
1-1586038-8
1-1586040-8
1-1586042-8
1-1586044-8
2-1586038-0
2-1586040-0
2-1586042-0
2-1586044-0
2-1586038-2
2-1586040-2
2-1586042-2
2-1586044-2
2-1586038-4
2-1586040-4
2-1586042-4
2-1586044-4
Vertical
High Density
Note: All Headers have Brass, Tin-Plated contacts.
Note: All part numbers are RoHS Compliant.
Vertical Pin Headers (Part No. 1586037 shown w/o pegs)
Right-Angle Pin Headers (Part No. 1586043 Screw Mount)
VAL-U-LOK Connector System
.165 [4.20] Centerline
Position 1 Identification Feature
.17 [4.2]
.384
[9.75]
.17 [4.2]
.165
[4.20]
Position 1
Identification Feature
.50
[12.8]
.50
[12.8]
.14 [3.5]
.165 [4.20]
.17 [4.2]
.22
[5.5]
.14 [3.5]
.165±004 [4.20±0.10]
.055±002
[1.40±0.05] Typ.
Circuit 1
∅.118±002
[∅3.00±0.05]
.018±003
[0.46±0.08]
.22±.00
[5.5±0.1]
.217±004 [5.50±0.10]
.165±004 [4.20±0.10]
Typ.
.185±003
[4.70±0.08]
2X
.165
[4.20]
Typ.
.217 [5.50]
.177 [4.50]
.165 [4.20]
∅.071
[∅1.80]
Circuit 1
∅.126
[∅3.20] 2X
PCB Layout: Component Side (screw mount shown)
Recommended Board Thickness .063 [1.60]
PCB Layout: Component Side (shown with pegs)
Recommended Board Thickness .070 [1.78]
123
Catalog 82181
Revised 4-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
Soft Shell
Pin and Socket Connectors
AMP
VAL-U-LOK Connector System
(Wire-to-Wire, Wire-to-Board and Wire-to-Panel) (Continued)
Blindmate Headers
A
B
Dimensions
C
D
E
2
—
4
4.2
[0.17]
8.4
[0.33]
12.6
[0.50]
16.8
[0.66]
21.0
[0.83]
25.2
[0.99]
29.4
[1.58]
33.6
[1.32]
37.8
[1.49]
42.0
[1.65]
46.2
[1.82]
5.4
[0.21]
9.6
[0.38]
13.8
[0.54]
18.0
[0.71]
22.2
[0.87]
26.4
[1.04]
30.6
[1.20]
34.8
[1.37]
39.0
[1.54]
43.2
[1.70]
47.4
[1.87]
51.6
[2.03]
9.4
[0.37]
13.6
[0.54]
17.8
[0.70]
22.0
[0.87]
26.2
[1.03]
30.4
[1.20]
34.6
[1.36]
38.8
[1.53]
43.0
[1.69]
47.2
[1.86]
51.4
[2.02]
55.6
[2.19]
10.8
[0.43]
15.0
[0.59]
19.2
[0.76]
23.4
[0.92]
27.6
[1.09]
31.8
[1.25]
36.0
[1.42]
40.2
[1.58]
44.4
[1.75]
48.6
[1.91]
52.0
[2.08]
57.0
[2.24]
13.2
[0.52]
17.4
[0.69]
21.6
[0.85]
25.8
[1.02]
30.0
[1.18]
34.2
[1.35]
38.4
[1.51]
42.6
[1.69]
46.8
[1.84]
51.0
[2.01]
55.2
[2.17]
59.4
[2.32]
6
8
10
12
14
16
High Density
UL 94V-2 Housings
With
Without
Drain Holes
Drain Holes
No. of
Pos.
18
20
22
24
UL 94V-0 Housings
With
Without
Drain Holes
Drain Holes
1586585-2
1586586-2
1586587-2
1586588-2
1586585-4
1586586-4
1586587-4
1586588-4
1586585-6
1586586-6
1586587-6
1586588-6
1586585-8
1586586-8
1586587-8
1586588-8
1-1586585-0
1-1586586-0
1-1586587-0
1-1586588-0
1-1586585-2
1-1586586-2
1-1586587-2
1-1586588-2
1-1586585-4
1-1586586-4
1-1586587-4
1-1586588-4
1-1586585-6
1-1586586-6
1-1586587-6
1-1586588-6
1-1586585-8
1-1586586-8
1-1586587-8
1-1586588-8
2-1586585-0
2-1586586-0
2-1586587-0
2-1586588-0
2-1586585-2
2-1586586-2
2-1586587-2
2-1586588-2
2-1586585-4
2-1586586-4
2-1586587-4
2-1586588-4
VAL-U-LOK Connector System
.165 [4.20] Centerline
Note: All part numbers are RoHS Compliant.
4.20 [.165]
Typ.
Last
Pin
A
0.50 ±0.08
[.020 ± .003]
C ± .003
15.00 ± 0.20
[.591 ± .008]
4.2 [.165]
5.6 [.22]
5.50 ± 0.10
[.217 ± .004]
Ø3.00 ± 0.05
[Ø.118 ± .002]
2X
Ø1.40 ± 0.05
[Ø.055 ± .002]
16X
4.20 ± 0.10
[.165 ± .004]
Non Cumulative
First Pin
5.4 [.21]
Circuit 1
4.70 ± 0.08
[.185 ± .003]
2X
D
Rib Indicates
Circuit 1
E
Recommended Hole Layout for
1.78 [.070] Maximum Thick PC Board
14.10 ± 0.20 [.555 ± .008]
1.80 [.071]
3.50 [.138]
B
5.50 [.217]
9.8 [.38]
124
Catalog 82181
Revised 4-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
Soft Shell
Pin and Socket Connectors
AMP
AMP-DUAC Connectors
Product Facts
■
Free-hanging or panel
mount plug housings
■
Vertical header with or
without mounting pegs and
with or without drain holes
■
Selective loading available
on vertical headers
■
4.2 mm x 4.2 mm
centerline
■
Male and female contacts
designed for 26-22 AWG
and 22-18 AWG wire
■
Receptacle housings accept
female contacts with less
orientation than competitive product
■
Right-angle headers
■
Designed for power
applications
■
Positive latch feature helps
prevent disconnection
■
AMP-DUAC (dual action)
receptacle contacts
■
Anti-stubbing contact
design
■
Polarized housings
■
Intermateable with Molex
Mini-Fit Jr. connectors
■
■
AMP-DUAC Connectors, for
power or signal applications,
belong to the broad family of
Tyco Electronics Soft Shell
connectors.
Recognized under
Component Program
of Underwriters
Laboratories Inc.,
File No. E28476
The dual action design
of the female receptacle
contact provides for low
insertion force, yet maintains
high-performance current
capacity. To help meet your
production requirements,
semiautomatic bench
machines and hand tools
are available for strip and
loose piece contacts,
respectively.
R
Certified by Canadian
Standards Association,
File No. LR7189
R
High density, 4.2 mm x
4.2 mm [.165 x .165]
centerline, dual-row
receptacle housings mate
with plug housings (freehanging or panel mount) or
pc board headers (vertical
or right-angle). Selective
contact loading is available
for vertical headers.
All housings are polarized
for easier mating and
locking latches help
maintain reliable
connections.
AMP-DUAC wire-to-board,
wire-to-panel, and wire-towire connectors are
intermateable with Molex
Mini-Fit Jr. series connectors.
Need more information?
Call Technical Support.
Technical Support is staffed
with specialists well versed
in Tyco Electronics products.
They can provide you with:
AMP-DUAC Connectors
.165 [4.20] Centerline
Wire-to-board and wire-towire connector system
High Density
■
Technical Documents
Product Specifications
108-1699—Headers
108-19099—Receptacles
Application Specification
114-19048—Use of Receptacles
Qualification Test Report
501-434
501-576
■
■
■
■
■
Technical support
Catalogs
Technical Documents
Product Samples
Tyco Electronics Authorized
Distributor Locations
Performance Data
Voltage Rating—600 VAC
Current Rating—9 amps maximum
in 2 position applications
Low Level Resistance—
10 megohms max.
Dielectric Withstanding Voltage—
1500 VAC/min.
Insulation Resistance—
1000 megohms minimum
Operating Temperature—
–55°C to +105°C [–67°F to +221°F]
125
Catalog 82181
Revised 4-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
Soft Shell
Pin and Socket Connectors
AMP
AMP-DUAC Connectors (Continued)
Receptacle Housings
N x 4.2=M
[N x .165=M]
4.2
[.165]
2-24 Position Housings
11.7
[.460]
Accept female contacts.
4.2
[.165]
Material
9.7
[.391]
Housings— Nylon
UL 94V-2, Natural color
UL 94V-0, White color
L
Related Product Data
18.7
[.736]
Number of
Positions
2
High Density
Mate with—Vertical headers (pages
128-133), right-angle headers (page
128) and plug housings (page 127).
Contacts— See below.
Strain Relief— See below
and page 127.
Technical Documents— pages 125
and 205-206
4
6
8
10
12
AMP-DUAC Connectors
.165 [4.20] Centerline
14
Strain Relief, 6 Position
Part Number 1375618-1
16
Used with plug or receptacle housings.
18
20
Wire Bundle Range— 4.19-5.59
[.165-.220]
Material— Nylon,
UL 94V-2, Natural color
22
24
Dimensions
Part Number
UL 94V-2
UL 94V-0
Natural
White
L
M
N
5.5
.216
9.7
.381
13.9
.547
18.1
.712
22.3
.877
26.5
1.043
30.7
1.208
34.9
1.374
39.1
1.539
43.3
1.704
47.5
1.870
51.7
2.035
—
1
106527-2
794657-2
4.2
.165
8.4
.330
12.6
.496
16.8
.661
21.0
.826
25.2
.992
29.4
1.157
33.6
1.322
37.8
1.488
42.0
1.653
46.2
1.818
1
106527-4
794657-4
2
106527-6
794657-6
3
106527-8
794657-8
4
1-106527-0
1-794657-0
5
1-106527-2
1-794657-2
6
1-106527-4
1-794657-4
7
1-106527-6
1-794657-6
8
1-106527-8
1-794657-8
9
2-106527-0
2-794657-0
10
2-106527-2
2-794657-2
11
2-106527-4
2-794657-4
Female Contacts
Used in receptacle housings.
14.80
Ref
14.80 Ref.
[.582]
Material— Phos. Bronze
Application Tooling— See chart and
pages 207-210
Technical Documents
Product Specifications
108-1699 AMP-DUAC Header
108-19099 AMP-DUAC Receptacle
Application Specification
114-19048 AMP-DUAC Receptacle
Contact
Ins. Dia.
Range
Plating
22-18
[.3-.8]
1.5-2.4
.059-.094
26-22
[.12-.3]
1.3-1.75
.047-.069
2@18 or 16
[.8-.9] [1.29]
Applicator Part Number
Part Number
Wire Size
Range
AWG [mm2]
3.3 Total
Max.
.130
Strip Form
Loose Piece
Tin
Gold
Tin
Gold
106529-2
1-794138-3
106528-2
1-794139-3
1-106529-2
1-794141-3
1-106528-2
1-794142-3
Tin
Gold
794418-1
1-794140-3
794421-1
1-794143-3
for
for AMP-O-MATIC CERTI-CRIMP
AMP-O-LECTRIC Stripper/Crimper
Hand Tool
Bench Machine
Machine
Part Number
680308-첸*
567959-1
734202-2
680307-첸*
567960-1
—
680350-첸*
—
90714-1
Extraction Tool Part Number 188688-1
*Part Number suffix “-2” indicates Applicator for Model K Machine and “-3” for Model G Machine.
Note: All part numbers are RoHS Compliant.
126
Catalog 82181
Revised 4-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
Soft Shell
Pin and Socket Connectors
AMP
AMP-DUAC Connectors (Continued)
Plug Housings
L
4.00
1.6
2-24 Position Housings
Accept male contacts.
[.098]
10.0
5.6
[.394]
[.220]
9.6
Material
2.5
[.157]
[.063]
M
[.38]
Recommended Cutout
for 2.00 [.079] Max. Thick Panel
Housings— Nylon
UL 94V-2, Natural color
UL 94V-0, White color
Related Product Data
23.9
Mate with—Receptacle housings
(page 126)
Contacts— See below.
Strain Relief— See below.
Technical Documents— pages 125
and 205-206
[.94]
Number of
Positions
2
4
6
8
10
12
Used with plug or receptacle housings.
14
Wire Bundle Range— 4.19-5.59
[.165-.220]
Material— Nylon,
UL 94V-2, Natural color
16
18
20
22
24
794542-2
794550-2
*794594-2
*794598-2
794542-4
794550-4
*794594-4
*794598-4
794542-6
794550-6
*794594-6
*794598-6
794542-8
794550-8
*794594-8
*794598-8
1-794542-0
1-794550-0
*1-794594-0
*1-794598-0
1-794542-2
1-794550-2
*1-794594-2
*1-794598-2
1-794542-4
1-794550-4
*1-794594-4
*1-794598-4
1-794542-6
1-794550-6
*1-794594-6
*1-794598-6
1-794542-8
1-794550-8
*1-794594-8
*1-794598-8
2-794542-0
2-794550-0
*2-794594-0
*2-794598-0
2-794542-2
2-794550-2
*2-794594-2
*2-794598-2
2-794542-4
2-794550-4
*2-794594-4
*2-794598-4
AMP-DUAC Connectors
.165 [4.20] Centerline
Strain Relief, 6 Position
Part Number 1375618-1
Part Number
UL 94V-2, Natural
UL 94V-0, White
Free-Hanging
Panel Mount
Free-Hanging
Panel Mount
High Density
Dimensions
L
M
5.4
10.8
.213
.425
9.6
15.0
.378
.591
13.8
19.2
.543
.756
18.0
23.4
.709
.921
22.2
27.6
.874
1.087
26.4
31.8
1.039
1.252
30.6
36.0
.205
1.417
34.8
40.2
1.370
1.583
39.0
44.4
1.535
1.748
43.2
48.6
1.701
1.913
47.4
52.8
1.866
2.079
51.6
57.0
2.032
2.244
*Call for availability.
Male Contacts
Used in plug housings.
16.86 Ref.
[.664]
Material— Phos. Bronze
Application Tooling— See chart and
pages 207-210
Part Number
Wire Size
Range
AWG [mm2]
Ins. Dia.
Range
Plating
22-18
[.3-.8]
1.5-2.4
.059-.094
Tin
Gold
Strip Form
Loose Piece
794576-1
794576-4
794577-1
——
Applicator Part Number
for
for AMP-O-MATIC
AMP-O-LECTRIC Stripper/Crimper
Bench Machine
Machine
680308-첸*
567959-1
26-22
1.3-1.75
Tin
794578-1
794579-1
680307-첸*
567960-1
[.12-.3]
.047-.069
Gold
794578-4
——
*Part Number suffix “-2” indicates Applicator for Model K Machine and “-3” for Model G Machine.
CERTI-CRIMP
Hand Tool
Part Number
734202-2
—
Note: All part numbers are RoHS Compliant.
127
Catalog 82181
Revised 4-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
Soft Shell
Pin and Socket Connectors
AMP
AMP-DUAC Connectors (Continued)
Vertical Header Assemblies
3.5 ±0.3
[.137 ±.012]
2, 4 and 6 Position,
with and without Pegs and
with and without Drain
Holes
8.4
Ref.
[.330]
17.8 Ref.
[.700]
4.70 ±0.08
[.185 ±.003]
8.4
Ref.
[.330]
5.5 ±0.1
[.217 ±.004]
2.9
[.114]
Material and Finish
.46 ±0.08
[.018 ±.003]
21.0
[.826] Ref.
Housing— Nylon
UL 94V-2, Natural color
UL 94V-0, White color
Contacts— 0.25 [.010] thick copper
alloy
4.2 ±0.1
[.165 ±.004]
Recommended PC Board Layout
4.2
[.165] Typ.
Related Product Data
Mate with—Receptacle housings
(page 126).
Technical Documents— pages 125
and 205-206
4.2
[.165] Typ
8.4
Ref.
[.330]
AMP-DUAC Connectors
.165 [4.20] Centerline
High Density
13.8
[.543]
Number
of
Positions
2
4
6
Part Number
PCB
Pegs
Drain
Holes
Plating
N
N
Y
Y
N
N
Y
Y
Y
Y
N
N
Y
Y
N
N
Y
Y
N
N
Y
Y
N
N
N
N
N
N
Y
Y
Y
Y
N
N
N
N
Y
Y
Y
Y
Y
Y
Y
Y
N
N
N
N
Tin
30 Gold
Tin
30 Gold
Tin
30 Gold
Tin
30 Gold
Tin
30 Gold
Tin
30 Gold
Tin
30 Gold
Tin
30 Gold
Tin
30 Gold
Tin
30 Gold
Tin
30 Gold
Tin
30 Gold
UL 94V-2, Natural
1586491-2
1586492-2
1586489-2
1586490-2
1-794349-1
1-794349-2
1-794302-1
1-794302-2
1586489-4
1586490-4
1586491-4
1586492-4
1-794303-1
1-794303-2
1-794350-1
1-794350-2
1-794304-1
1-794304-2
1-794351-1
1-794351-2
1586489-6
1586490-6
1586491-6
1586492-6
UL 94V-0, White
1586495-2
1586496-2
1586493-2
1586494-2
1-794543-1
1-794543-2
1-794540-1
1-794540-2
1586493-4
1586494-4
1586495-4
1586496-4
1-794466-1
1-794466-2
1-794484-1
1-794484-2
1-794467-1
1-794467-2
1-794485-1
1-794485-2
1586493-6
1586494-6
1586495-6
1586496-6
Note: All part numbers are RoHS Compliant.
128
Catalog 82181
Revised 4-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
Soft Shell
Pin and Socket Connectors
AMP
AMP-DUAC Connectors (Continued)
Vertical Header Assemblies
(Continued)
8 and 10 Position,
with and without Pegs and
with and without Drain
Holes
3.5 ±0.3
[.137 ±.012]
16.8
[.661] Ref.
2.9
[.114]
26.2
[1.03] Ref.
Material and Finish
4.70 ±0.08
[.185 ±.003]
29.4
[1.15] Ref.
Housing— Nylon
UL 94V-2, Natural color
UL 94V-0, White color
Contacts— 0.25 [.010] thick copper
alloy
4.2
[.165] Typ.
16.8
[.661] Ref.
5.5 ±0.1
[.217 ±.004]
.46 ±0.08
[.018 ±.003]
4.2 ±0.1
[.165 ±.004]
Related Product Data
Recommended PC Board Layout
Mate with—Receptacle housings
(page 126).
Technical Documents— pages 125
and 205-206
4.2
[.165] Typ.
16.8
Ref.
[.661]
Number
of
Positions
10
Part Number
PCB
Pegs
Drain
Holes
Plating
Y
Y
N
N
Y
Y
N
N
Y
Y
N
N
Y
Y
N
N
N
N
N
N
Y
Y
Y
Y
N
N
N
N
Y
Y
Y
Y
Tin
30 Gold
Tin
30 Gold
Tin
30 Gold
Tin
30 Gold
Tin
30 Gold
Tin
30 Gold
Tin
30 Gold
Tin
30 Gold
UL 94V-2, Natural
1586489-8
1586490-8
1586491-8
1586492-8
1-794305-1
1-794305-2
1-794352-1
1-794352-2
1-1586489-0
1-1586490-0
1-1586491-0
1-1586492-0
1-794306-1
1-794306-2
1-794353-1
1-794353-2
UL 94V-0, White
1586493-8
1586494-8
1586495-8
1586496-8
1-794468-1
1-794468-2
1-794486-1
1-794486-2
1-1586493-0
1-1586494-0
1-1586495-0
1-1586496-0
1-794469-1
1-794469-2
1-794487-1
1-794487-2
AMP-DUAC Connectors
.165 [4.20] Centerline
8
High Density
22.2
[.874]
Note: All part numbers are RoHS Compliant.
129
Catalog 82181
Revised 4-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
Soft Shell
Pin and Socket Connectors
AMP
AMP-DUAC Connectors (Continued)
Vertical Header Assemblies
(Continued)
3.5 ±0.3
[.137 ±.012]
12 Position,
with and without Pegs and
with and without Drain
Holes
21.0
[.826] Ref.
30.4
[1.19] Ref.
2.9
[.114]
4.70 ±0.08
[.185 ±.003]
33.6
[1.32] Ref.
Material and Finish
High Density
4.2 ±0.1
[.165 ±.004]
5.5 ±0.1
[.217 ±.004]
Recommended PC Board Layout
4.2
[.165] Typ.
21.0
Ref.
[.826]
26.4
[1.03]
Related Product Data
AMP-DUAC Connectors
.165 [4.20] Centerline
0.46 ±0.08
[.118 ±.003]
4.2
[.165] Typ.
Housing— Nylon
UL 94V-2, Natural color
UL 94V-0, White color
Contacts— 0.25 [.010] thick copper
alloy
Mate with—Receptacle housings
(page 126).
Technical Documents— pages 125
and 205-206
21.0
[.826] Ref.
Number
of
Positions
PCB
Pegs
Drain
Holes
Plating
12
Y
Y
N
N
Y
Y
N
N
N
N
N
N
Y
Y
Y
Y
Tin
30 Gold
Tin
30 Gold
Tin
30 Gold
Tin
30 Gold
14 Position,
with and without Pegs and
with and without Drain
Holes
3.5 ±0.3
[.137 ±.012]
Part Number
UL 94V-2, Natural
1-1586489-2
1-1586490-2
1-1586491-2
1-1586492-2
1-794307-1
1-794307-2
1-794354-1
1-794354-2
UL 94V-0, White
1-1586493-2
1-1586494-2
1-1586495-2
1-1586496-2
1-794470-1
1-794470-2
1-794488-1
1-794488-2
25.2
[.992] Ref.
34.6
[1.36] Ref.
2.9
[.114]
4.70 ±0.08
[.185 ±.003]
Material and Finish
Housing— Nylon
UL 94V-2, Natural color
UL 94V-0, White color
Contacts— 0.25 [.010] thick copper
alloy
25.2
[.992] Ref.
5.5 ±0.1
[.217 ±.004]
37.8
[1.49] Ref.
.46 ±0.08
[.018 ±.003]
4.2
[.165] Typ.
4.2 ±0.1
[.165 ±.004]
Recommended PC Board Layout
Related Product Data
Mate with—Receptacle housings
(page 126).
Technical Documents— pages 125
and 205-206
25.2
Ref.
[.992]
4.2
[.165] Typ.
30.6
[1.20]
Number
of
Positions
PCB
Pegs
Drain
Holes
Plating
Part Number
14
Y
Y
N
N
Y
Y
N
N
N
N
N
N
Y
Y
Y
Y
Tin
30 Gold
Tin
30 Gold
Tin
30 Gold
Tin
30 Gold
UL 94V-2, Natural
1-1586489-4
1-1586490-4
1-1586491-4
1-1586492-4
1-794308-1
1-794308-2
1-794355-1
1-794355-2
UL 94V-0, White
1-1586493-4
1-1586494-4
1-1586495-4
1-1586496-4
1-794453-1
1-794453-2
1-794489-1
1-794489-2
Note: All part numbers are RoHS Compliant.
130
Catalog 82181
Revised 4-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
Soft Shell
Pin and Socket Connectors
AMP
AMP-DUAC Connectors (Continued)
Vertical Header Assemblies
(Continued)
29.4
[1.15] Ref.
3.5 ±0.3
[.137 ±.012]
38.8
[1.53] Ref.
16 Position,
with and without Pegs and
with and without Drain
Holes
2.9
[.114]
4.70 ±0.08
[.185 ±.003]
42.0
[1.65] Ref.
Material and Finish
4.2 ±0.1
[.165 ±.004]
5.5 ±0.1
[.217 ±.004]
Recommended PC Board Layout
29.4
Ref.
[1.15]
34.8
[1.37]
Related Product Data
4.2
[.165] Typ.
Number
of
Positions
PCB
Pegs
Drain
Holes
Plating
Part Number
16
Y
Y
N
N
Y
Y
N
N
N
N
N
N
Y
Y
Y
Y
Tin
30 Gold
Tin
30 Gold
Tin
30 Gold
Tin
30 Gold
UL 94V-2, Natural
1-1586489-6
1-1586490-6
1-1586491-6
1-1586492-6
1-794309-1
1-794309-2
1-794356-1
1-794356-2
AMP-DUAC Connectors
.165 [4.20] Centerline
33.6
[1.32] Ref.
3.5 ±0.3
[.137 ±.012]
2.9
[.114]
33.6
[1.69] Ref.
29.4
[1.15] Ref.
4.70 ±0.08
[.185 ±.003]
Material and Finish
46.2
[1.81] Ref.
Housing— Nylon
UL 94V-2, Natural color
UL 94V-0, White color
Contacts— 0.25 [.010] thick copper
alloy
4.2
[.165] Typ.
.46 ±0.08
[.018 ±.003]
Related Product Data
Mate with—Receptacle housings
(page 126).
Technical Documents— pages 125
and 205-206
UL 94V-0, White
1-1586493-6
1-1586494-6
1-1586495-6
1-1586496-6
1-794429-1
1-794429-2
1-794490-1
1-794490-2
High Density
18 Position,
with and without Pegs and
with and without Drain
Holes
0.46 ±0.08
[.118 ±.003]
4.2
[.165] Typ.
Housing— Nylon
UL 94V-2, Natural color
UL 94V-0, White color
Contacts— 0.25 [.010] thick copper
alloy
Mate with—Receptacle housings
(page 126).
Technical Documents— pages 125
and 205-206
29.4
[1.16] Ref.
4.2
[.165] Typ.
33.6
Ref.
[1.32]
39.0
[1.53]
Number
of
Positions
PCB
Pegs
Drain
Holes
Plating
18
Y
Y
N
N
Y
Y
N
N
N
N
N
N
Y
Y
Y
Y
Tin
30 Gold
Tin
30 Gold
Tin
30 Gold
Tin
30 Gold
4.2 ±0.1
[.165 ±.004]
5.5 ±0.1
[.217 ±.004]
Recommended PC Board Layout
Part Number
UL 94V-2, Natural
1-1586489-8
1-1586490-8
1-1586491-8
1-1586492-8
1-794310-1
1-794310-2
1-794357-1
1-794357-2
UL 94V-0, White
1-1586493-8
1-1586494-8
1-1586495-8
1-1586496-8
1-794454-1
1-794454-2
1-794491-1
1-794491-2
Note: All part numbers are RoHS Compliant.
131
Catalog 82181
Revised 4-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
Soft Shell
Pin and Socket Connectors
AMP
AMP-DUAC Connectors (Continued)
Vertical Header Assemblies
3.5 ±0.3
[.137 ±.012]
37.8
[1.48] Ref.
(Continued)
20 Position,
with and without Pegs and
with and without Drain
Holes
50.4
[1.98] Ref.
4.2
[.165]Typ.
Material and Finish
Housing— Nylon
UL 94V-2, Natural color
UL 94V-0, White color
Contacts— 0.25 [.010] thick copper
alloy
47.2
[1.85] Ref.
37.8
[1.48] Ref.
4.70 ±0.08
[.185 ±.003]
2.9
[.114]
.46 ±0.08
[.018 ±.003]
4.2 ±0.1
[.165 ±.004]
5.5 ±0.1
[.217 ±.004]
Recommended PC Board Layout
4.2
[.165]Typ.
37.8
Ref.
[1.48]
43.2
[1.70]
Related Product Data
High Density
Mate with—Receptacle housings
(page 126).
Technical Documents— pages 125
and 205-206
AMP-DUAC Connectors
.165 [4.20] Centerline
High Temperature Headers
IR Reflow compatible, UL 94V-0,
Black color
22 Position,
with and without Pegs and
with and without Drain
Holes
Number
of
Positions
PCB
Pegs
Drain
Holes
Plating
20
Y
Y
N
N
Y
Y
N
N
N
N
N
N
Y
Y
Y
Y
Tin
30 Gold
Tin
30 Gold
Tin
30 Gold
Tin
30 Gold
Number
of
Positions
PCB
Pegs
Drain
Holes
Plating
20
N
N
N
N
Tin
30 Gold
3.5 ±0.3
[.137 ±.012]
UL 94V-0, White
2-1586493-0
2-1586494-0
2-1586495-0
2-1586496-0
1-794455-1
1-794455-2
1-794492-1
1-794492-2
Part Number
UL 94V-0, Black
1-794415-1
1-794415-2
42.0
[1.65] Ref.
51.4
[2.02] Ref.
42.0
[1.65] Ref.
4.70 ±0.08
[.185 ±.003]
2.9
[.114]
Material and Finish
54.6
[2.14] Ref.
4.2
[.165] Typ.
Housing— Nylon
UL 94V-2, Natural color
UL 94V-0, White color
Contacts— 0.25 [.010] thick copper
alloy
.46 ±0.08
[.018 ±.003]
4.2 ±0.1
[.165 ±.004]
5.5 ±0.1
[.217 ±.004]
Recommended PC Board Layout
4.2
Typ.
[.165]
42.0
Ref.
[1.65]
47.4
[1.87]
Related Product Data
Mate with—Receptacle housings
(page 126).
Technical Documents— pages 125
and 205-206
Part Number
UL 94V-2, Natural
2-1586489-0
2-1586490-0
2-1586491-0
2-1586492-0
1-794311-1
1-794311-2
1-794358-1
1-794358-2
Number
of
Positions
PCB
Pegs
Drain
Holes
Plating
Part Number
22
Y
Y
N
N
Y
Y
N
N
N
N
N
N
Y
Y
Y
Y
Tin
30 Gold
Tin
30 Gold
Tin
30 Gold
Tin
30 Gold
UL 94V-2, Natural
2-1586489-2
2-1586490-2
2-1586491-2
2-1586492-2
1-794312-1
1-794312-2
1-794359-1
1-794359-2
UL 94V-0, White
2-1586493-2
2-1586494-2
2-1586495-2
2-1586496-2
1-794471-1
1-794471-2
1-794493-1
1-794493-2
Note: All part numbers are RoHS Compliant.
132
Catalog 82181
Revised 4-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
Soft Shell
Pin and Socket Connectors
AMP
AMP-DUAC Connectors (Continued)
Vertical Header Assemblies
3.5 ±0.3
[.137 ±.012]
46.2
[1.81] Ref.
(Continued)
24 Position,
with and without Pegs and
with and without Drain
Holes
58.8
[2.13] Ref.
.46 ±0.08
[.018 ±.003]
4.2
[.165] Typ.
Material and Finish
4.2 ±0.1
[.165 ±.004]
Housing— Nylon
UL 94V-2, Natural color
UL 94V-0, White color
Contacts— 0.25 [.010] thick copper
alloy
Recommended PC Board Layout
Mate with—Receptacle housings
(page 126).
Technical Documents— pages 125
and 205-206
PCB
Pegs
Drain
Holes
Plating
Part Number
24
Y
Y
N
N
Y
Y
N
N
N
N
N
N
Y
Y
Y
Y
Tin
30 Gold
Tin
30 Gold
Tin
30 Gold
Tin
30 Gold
UL 94V-0, White
2-1586493-4
2-1586494-4
2-1586495-4
2-1586496-4
1-794472-1
1-794472-2
1-794494-1
1-794494-2
12.80
[.504]
1.40±0.05
[.06±.002]
2-24 Position, with Pegs
and without Drain Holes
3.20
[.126]
3.8 Ref.
[.150] 10.0
0.40
[.016]
Housing— Nylon
UL 94V-2, Natural color
UL 94V-0, White color
Contacts— Copper alloy
1.067 Sq.
[.042]
[.394]
4.2
[.165]
6.4
[.252]
5.50±0.10
[.217±0.004]
7.30±0.08
[.287±0.003]
3.5±0.5
[.14±.02]
5.50±0.10
[.22±.004]
4.2±0.1[.165±0.004] Typ.
Non-Cumulative
Recommended Mounting Hole Pattern
For 1.78 [.070] Max. Thick PC Board
(Component Side Shown)
6.4
[.252]
Number
of
Positions
2
4
6
8
10
12
14
16
18
20
22
24
Part Number
PCB
Pegs
Drain
Holes
Plating
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
N
N
N
N
N
N
N
N
N
N
N
N
Tin
Tin
Tin
Tin
Tin
Tin
Tin
Tin
Tin
Tin
Tin
Tin
UL 94V-2, Natural
1-794507-1
1-794508-1
1-794448-1
1-794509-1
1-794510-1
1-794511-1
1-794512-1
1-794513-1
1-794514-1
1-794449-1
1-794515-1
1-794516-1
UL 94V-0, White
1-794526-1
1-794527-1
1-794528-1
1-794529-1
1-794530-1
1-794531-1
1-794532-1
1-794533-1
1-794588-1
1-794534-1
1-794589-1
1-794590-1
Note: All part numbers are RoHS Compliant.
Catalog 82181
Revised 4-08
www.tycoelectronics.com
AMP-DUAC Connectors
.165 [4.20] Centerline
3.25±0.05
[.128±.002]
9.6
[.378]
Mate with—Receptacle housings
(page 126).
Technical Documents— pages 125
and 205-206
UL 94V-2, Natural
2-1586489-4
2-1586490-4
2-1586491-4
2-1586492-4
794313-3
794313-4
1-794360-1
1-794360-2
High Density
Number
of
Positions
Right-Angle Header Assemblies
Related Product Data
5.5 ±0.1
[.217 ±.004]
4.2
Typ.
[.165]
46.2
Ref.
[1.81]
51.6
[2.03]
Related Product Data
Material and Finish
55.6
[2.18] Ref.
46.2
[1.81] Ref.
4.70 ±0.08
[.185 ±.003]
2.9
[.114]
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
133
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
Soft Shell
Pin and Socket Connectors
AMP
Engineering Notes
134
Catalog 82181
Revised 4-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208