Information Sheet for Terminal Oiler 63801-7240 Information Sheet for Terminal Oiler Order No. 63801-7240 For TM3000 Press Side Loading Terminals To install a Terminal Oiler (Order No. 63801-7240) to any FineAdjust or Mini-Mac Applicator mounted in the TM3000 Press use the following procedure. 1. Open the Front Guard. 2. Remove lid assembly from the oiler jar. 3. Remove upper oiler nut from lid assembly. 4. Place the oiler mounting bracket (63801-7230) over tube and replace upper nut and tighten securely. 5. Place lid assembly with mounting bracket on the oiler jar and turn until hand tight. Do not over tighten. 6. Mount terminal oiler assembly with bracket on the side of the Plate-Quick Change (63801-7222) installed on the TM-3000 Press. See Figure 1. 7. Close the Front Guard. 8. Recommended oil: OPEN FRONT GUARD USE 63801-7230 MTG. BRACKET M5 X 10LG BHCS 63801-7240 OILER ASSEMBLY Product Name: Transdraw B-19 Vendor: Sure Lubricant, Inc. 356 South Lively Boulevard Elk Grove Village, IL 60007-2010 Phone: 888-787-3582 Fax: 847-956-6655 E-Mail: [email protected] 63801-7222 PLATE-QUICK CHANGE Figure 1 9. For replacement wicks use part no. 63890-0727 (package of 25). Americas Headquarters Far East North Headquarters Far East South Headquarters European Headquarters Corporate Headquarters -JTMF*MMJOPJT64" :BNBUP,BOBHBXB+BQBO +VSPOH4JOHBQPSF .VOJDI(FSNBOZ 8FMMJOHUPO$U .0-&9 -JTMF*-64" BNFSJOGP!NPMFYDPN GFOJOGP!NPMFYDPN GFTJOGP!NPMFYDPN FVSJOGP!NPMFYDPN 'BY Visit our Web site at http://www.molex.com Order No: ATS-638017240 Release Date: 05-24-07 Revision: B Revision Date: 05-24-07 UNCONTROLLED COPY Page 1 of 6 Information Sheet for Terminal Oiler 63801-7240 Information Sheet for Terminal Oiler Order No. 63801-7240 For TM3000 Press Rear Loading Terminals To install a Terminal Oiler (Order No. 63801-7240) to any FineAdjust or Mini-Mac Applicator mounted in the TM3000 Press use the following procedure. 1. 2. 3. 4. 5. 6. 7. 8. REMOVE REAR GUARD Remove the Rear Guard (63801-7281). Remove lid assembly from the oiler jar. Remove upper oiler nut from lid assembly. Place the oiler mounting bracket (63801-7230) over tube and replace upper nut and tighten securely. Place lid assembly with mounting bracket on the oiler jar and turn until hand tight. Do not over tighten. Mount terminal oiler assembly with bracket on the back of the Plate-Quick Change (638017222) installed on the TM-3000 Press. See Figure 1. Replace the Rear Guard. Recommended oil: 63801-7222 PLATE-QUICK CHANGE 63801-7240 OILER ASSEMBLY Product Name: Transdraw B-19 Vendor: Sure Lubricant, Inc. 356 South Lively Boulevard Elk Grove Village, IL 60007-2010 Phone: 888-787-3582 Fax: 847-956-6655 E-Mail: [email protected] M5 X 10LG BHCS USE 63801-7230 MTG. BRACKET Figure 1 9. For replacement wicks use part no. 63890-0727 (package of 25). Americas Headquarters Lisle, Illinois 60532 U.S.A. 1-800-78MOLEX [email protected] Far East North Headquarters Yamato, Kanagawa, Japan 81-462-65-2324 [email protected] Far East South Headquarters Jurong, Singapore 65-6-268-6868 [email protected] European Headquarters Munich, Germany 49-89-413092-0 [email protected] Corporate Headquarters 2222 Wellington Ct. Lisle, IL 60532 U.S.A. 630-969-4550 Fax: 630-969-1352 Visit our Web site at http://www.molex.com Order No: ATS-638017240 Revision: B Release Date: 05-24-07 Revision Date: 05-24-07 UNCONTROLLED COPY Page 2 of 6 Information Sheet for Terminal Oiler 63801-7240 Information Sheet Terminal Oiler Order No. 63801-7240 For TM2000 with Guard 63800-8310 To install a Terminal Oiler (Order No. 63801-7240) to any FineAdjust or Mini-Mac Applicator mounted in the TM2000 Press with Guard (Part No. 63800-8310), use the following procedure. 1. 2. 3. 4. 5. 6. 7. 8. Remove the Guard 63800-8310. Remove lid assembly from the oiler jar. Remove upper oiler nut from lid assembly. Place oiler mounting bracket over tube and replace upper nut and tighten securely. Place lid assembly with mounting bracket on the oiler jar and turn until hand tight. Do not over tighten. Mount terminal oiler assembly with bracket on the frame of the FineAdjust or Mini-Mac Applicator. See Figure 1 Replace the Guard. Recommended oil: 63800-8310 GUARD Product Name: Transdraw B-19 APPLICATOR Vendor: Sure Lubricant, Inc. 356 South Lively Boulevard Elk Grove Village, IL 60007-2010 Phone: 888-787-3582 Fax: 847-956-6655 E-Mail: [email protected] M5 X 10LG BHCS USE 63890-0713 MTG. BRACKET 63801-7240 OILER ASSEMBLY Figure 1 9. For replacement wicks use part no.63890-0727 (package of 25). Americas Headquarters Lisle, Illinois 60532 U.S.A. 1-800-78MOLEX [email protected] Far East North Headquarters Yamato, Kanagawa, Japan 81-462-65-2324 [email protected] Far East South Headquarters Jurong, Singapore 65-6-268-6868 [email protected] European Headquarters Munich, Germany 49-89-413092-0 [email protected] Corporate Headquarters 2222 Wellington Ct. Lisle, IL 60532 U.S.A. 630-969-4550 Fax: 630-969-1352 Visit our Web site at http://www.molex.com Order No: ATS-638017240 Revision: B Release Date: 05-24-07 Revision Date: 05-24-07 UNCONTROLLED COPY Page 3 of 6 Information Sheet for Terminal Oiler 63801-7240 Information Sheet Terminal Oiler Order No. 63801-7240 For TM2000 Press with Guard 63800-8350 To install a Terminal Oiler (Order No. 63801-7240) to a TM2000 Press, use the following procedure. 1. 2. 3. 4. 5. 6. Remove lid assembly from the oiler jar. Remove upper oiler nut from lid assembly. Place oiler mtg. bracket over tube and replace upper nut and tighten securely. Place lid assembly with mtg. bracket on the oiler jar and turn until hand tight. Do not over tighten. Mount terminal oiler assembly with bracket on the guard of the TM2000 Press. Recommended lubricant oil: GUARD Product Name: Transdraw B-19 Vendor: Sure Lubricant, Inc. 356 South Lively Boulevard Elk Grove Village, IL 60007-2010 Phone: 888-787-3582 Fax: 847-956-6655 E-Mail: [email protected] M6 X 12LG. BHCS NUT UPPER 7. For replacement wicks use part no. 63890-0727 (package of 25). USE 63890-0725 MTG. BRACKET LID ASSEMBLY JAR Americas Headquarters Lisle, Illinois 60532 U.S.A. 1-800-78MOLEX [email protected] Far East North Headquarters Yamato, Kanagawa, Japan 81-462-65-2324 [email protected] Far East South Headquarters Jurong, Singapore 65-6-268-6868 [email protected] European Headquarters Munich, Germany 49-89-413092-0 [email protected] M6 FULL NUT M6 FLAT WASHER Corporate Headquarters 2222 Wellington Ct. Lisle, IL 60532 U.S.A. 630-969-4550 Fax: 630-969-1352 Visit our Web site at http://www.molex.com Order No: ATS-638017240 Revision: B Release Date: 05-24-07 Revision Date: 05-24-07 UNCONTROLLED COPY Page 4 of 6 Information Sheet for Terminal Oiler 63801-7240 Information Sheet Terminal Oiler Order No. 63801-7240 For FineAdjust and Mini-Mac Applicators To install a Terminal Oiler (Order No. 63801-7240) to any FineAdjust or Mini-Mac Applicator, use the following procedure. 1. Remove lid assembly from the oiler jar. 2. Remove upper oiler nut from lid assembly. 3. Place oiler mtg. bracket over tube and replace upper nut and tighten securely. 4. Place lid assembly with mounting bracket on the oiler jar and turn until hand tight. Do not over tighten. FRAME 5. Mount terminal oiler assembly with bracket on the frame M5 X 10LG of the FineAdjust or Mini-Mac Applicator. BHCS 6. Recommended lubricant oil: Product Name: Transdraw B-19 Vendor: Sure Lubricant, Inc. 356 South Lively Boulevard Elk Grove Village, IL 60007-2010 Phone: 888-787-3582 Fax: 847-956-6655 E-Mail: [email protected] APPLICATOR NUT-UPPER USE 63890-0713 MTG. BRACKET 7. For replacement wicks use part no. 63890-0727 (package of 25). LID ASSEMBLY JAR Americas Headquarters Lisle, Illinois 60532 U.S.A. 1-800-78MOLEX [email protected] Far East North Headquarters Yamato, Kanagawa, Japan 81-462-65-2324 [email protected] Far East South Headquarters Jurong, Singapore 65-6-268-6868 [email protected] European Headquarters Munich, Germany 49-89-413092-0 [email protected] Corporate Headquarters 2222 Wellington Ct. Lisle, IL 60532 U.S.A. 630-969-4550 Fax: 630-969-1352 Visit our Web site at http://www.molex.com Order No: ATS-638017240 Revision: B Release Date: 05-24-07 Revision Date: 05-24-07 UNCONTROLLED COPY Page 5 of 6 Information Sheet for Terminal Oiler 63801-7240 Information Sheet Terminal Oiler Order No. 63801-7240 For a TM40/TM42 Press If your TM42 Presses was produced before 1996, it did not include provisions to mount an oiler. To install a Terminal Oiler (Order No. 63801-7240) to your press you will need to add a mounting hole. Locate this hole on the left side of the frame, with the front of press facing you, under the track. Use the following procedure to install the oiler. 1. 2. 3. Drill a 4.20mm (.165”) diameter x 17.00mm (.62”) deep in the location shown in the figure shown. Tap a M6-1.0 x 12.00mm (.47”) deep. Use a M6 BHCS and M6 flat washer to secure oiler onto frame. OR 4. 5. 6. 7. Drill .159” (#21) x .62” deep. Tap #10-32 x .62” deep. Use #10-32 x 0.50” BHSC. Recommended lubricant oil: Product Name:Transdraw B-19 Vendor: Sure Lubricant, Inc. 356 South Lively Boulevard Elk Grove Village, IL 60007-2010 Phone: 888-787-3582 Fax: 847-956-6655 E-Mail: [email protected] 8. DRILL AND TAP HERE USE 63890-0725 MTG. BRACKET M6 X 10LG. BHCS For replacement wicks use part no. 63890-0727 (package of 25). Americas Headquarters Lisle, Illinois 60532 U.S.A. 1-800-78MOLEX [email protected] 19.0mm (.75”) M6 WASHER Far East North Headquarters Yamato, Kanagawa, Japan 81-462-65-2324 [email protected] 35.0mm (1.38”) 63801-7240 OILER Far East South Headquarters Jurong, Singapore 65-6-268-6868 [email protected] European Headquarters Munich, Germany 49-89-413092-0 [email protected] Corporate Headquarters 2222 Wellington Ct. Lisle, IL 60532 U.S.A. 630-969-4550 Fax: 630-969-1352 Visit our Web site at http://www.molex.com Order No: ATS-638017240 Revision: B Release Date: 05-24-07 Revision Date: 05-24-07 UNCONTROLLED COPY Page 6 of 6