Reference Information Dimensions Note: All dimensions are shown in mm. Divide by 25.4 to convert millimeters into inches. J CJ1 Product Dimensions Unit/product Model number Width Power Supply Unit CJ1W-PA205R 80 Power Supply pp y Unit CJ1W-PA202 45 CJ1W-PD025 60 CJ1M-CPU11/12/13 31 CJ1M-CPU21/22/23 49 CJ1H-CPUjjj CJ1G-CPUjjj 62 CJ1W-TER01 14.7 CPU Unit End Cover CJ1M-CPU11/12/13 CJ1M-CPU21/22/23 J Example Rack Widths using CJ1WPA202 Power Supply Unit (AC, 14 W) No. of Units mounted t d with ith 31-mm width Rack width (mm) With CJ1MCPU12/13 With CJ1MCPU22/23 With CJ1G or CJ1H CPU Unit 1 121.7 139.7 152.7 2 152.7 170.7 183.7 3 183.7 201.7 214.7 4 214.7 232.7 245.7 5 245.7 263.7 276.7 6 276.7 294.7 307.7 7 307.7 325.7 338.7 8 338.7 356.7 369.7 9 369.7 387.7 400.7 10 400.7 418.7 431.7 Programmable Controller CJ1 B-131 Reference Information Dimensions Note: All dimensions are shown in mm. Divide by 25.4 to convert millimeters into inches. Units of Width 31 mm J Units of Width 20 mm Unit Model number Width I/O Control Module CJ1W-IC101 20 32Basic-point p I/O / Modules CJ1W-ID231/232 Unit Model number Width I/O Interface Module CJ1W-II101 31 8/16-point Basic I/O Modules CJ1W-ID201 CJ1W-ID211 CJ1W-IA111/201 CJ1W-OD201/202/203/204 CJ1W-OD211/212 CJ1W-OC201/211 CJ1W-OA201 32-point Basic I/O Modules CJ1W-MD231 CJ1W MD232 CJ1W-MD232 CJ1W-MD233 64-point Basic I/O Modules CJ1W-ID261 CJ1W-ID262 CJ1W-OD261 CJ1W-OD262 CD1W-MD262 CJ1W-OD263 CD1W-MD261 CD1W-MD263 CD1W-MD563 Interrupt Input Module CJ1W-INT01 High Speed Input Module CJ1W-IDP01 Analog I/O Module CJ1W-ADjjj CJ1W-DAjjj CJ1W-MAD42 Temperature Control Units CJ1W-TCjjj Position Control Units CJ1W-NC113/133 CJ1W-NC213/233 CJ1W-NC413/433 High-speed Counter Unit CJ1W-CT021 ID Sensor Unit CJ1W-V600C11 CJ1W-V600C12 Controller Link Module CJ1W-CLK21-V1 Serial Communications Unit CJ1W-SCU41 Ethernet Module CJ1W-ETN21 DeviceNet Module CJ1W-DRM21 ProfiBus-DP Slave CJ1W-PRT21 ProfiBus-DP Master CJ1W-PRM21 CJ1W-OD231/232 B7A Interface Unit CJ1W-B7A22 CJ1W-B7A14 CJ1W-B7A04 CompoBus/S Master Module CJ1W-SRM21 I/O Control Unit 32-point I/O Units (CJ1W-ID23j/OD23j) B-132 Programmable Controller CJ1 Reference Information Dimensions I/O Interface Unit 8/16-point Basic I/O Units, Interrupt Input Unit, and High-speed Input Unit J Mounting Height The mounting height of CJ1 Series CPU Racks and Expansion Racks is from 81.6 to 89.0 mm, depending on the Modules that are mounted. Additional height is required to connect Programming Devices (e.g., CX-Programmer or Programming Console) and Cables. Be sure to allow sufficient mounting height. Approx. 100 to 150 mm 64-point Basic I/O Units and 32-point Basic I/O Units (CJ1W-MD23j) 81.6 to 89.0 mm Note: Consider the following points when expanding the configuration: Special I/O Units and CPU Bus Units • • The total length of I/O Connecting Cable must not exceed 12 m. I/O Connecting Cables require the bending radius as indicated in the CS/CJ-series Connecting Cable. CS/CJ-series Connecting Cable R ≧ 69 mm J Mounting Dimensions Note: Outer diameter of cable: 8.6 mm. DIN Track model number A PFP-100N2 16 mm PFP-100N 7.3 mm PFP-50N 7.3 mm Programmable Controller CJ1 B-133 Reference Information CJ1 system Configuration Worksheets J Worksheet 1 CPU Rack Required Parts Qty. CPU -- Note: CJ1M-CPU1j requires 0.58 A, CJ1M-CPU2j requires 0.64 A, CJ1G requires 0.91 A, SJ1H requires 0.99 A Module Current Consumption 1 Description 1 1 2 1 3 1 4 1 5 1 6 1 7 1 8 1 9 1 10 CJ1W-IC101 1 0.02 A at 5V If CJ1 Modules exceed ten per system, an additional rack is required. The CJ1W will attach to a CJ1W-II101 in the expansion rack. TOTALS: Power Supply: 1 Optional Parts Memory Card (FLASH) Programming Cable (Peripheral cable) CX-Programmer Programming Software Remote I/O Touch Screens/Cables/Terminal Blocks/Other Software/Etc. Note: Make copies of this worksheet for system configuration and planning. B-134 Programmable Controller CJ1 Part Number(s) Selected Reference Information CJ1 system Configuration Worksheets J Worksheet 2 Expansion Rack #_____ Required Parts Qty. Part Number(s) Selected I/O Expansion Cables (CS1W-CNjj3) 1 CS1W-CN _________ I/O Expansion Module CJ1W-II101 (Current consumption 0.13 A at 5V) 1 CJ1W-II101 Module Current Consumption Description 1 1 2 1 3 1 4 1 5 1 6 1 7 1 8 1 9 1 10 CJ1W-IC101 1 0.02 A at 5V If CJ1 Modules exceed ten per system, an additional rack is required. The CJ1W will attach to a CJ1W-II101 in the expansion rack. TOTALS: Power Supply: Other Note: Make copies of this worksheet for system configuration and planning. Programmable Controller CJ1 B-135