Electronic Components Omron Electronic Components: The Quality, Flexibility and Global Support You Need Master Selection Guide For More Detailed Information… Visit Us Online: www.components.omron.com • Browse Omron’s full range of Product information and selection guides. • Download PDF’s — datasheets, brochures, and more. • Find Omron solutions for competitive products. • Locate a Distributor and search for available inventory. Call Us: 1-847-882-2288 Monday through Friday, 7:30 a.m. to 6:00 p.m. Central Time (CT) Relays Switches Photomicrosensors Micro Sensors Connectors Email Us: [email protected] OMRON ELECTRONICS COMPONENTS LLC 55 Commerce Drive • Schaumburg, IL 60173 IT IS THE BUYER’S SOLE RESPONSIBILITY TO ENSURE THAT ANY OMRON PRODUCT IS FIT AND SUFFICIENT FOR USE IN A MOTORIZED VEHICLE APPLICATION. BUYER SHALL BE SOLELY RESPONSIBLE FOR DETERMINING APPROPRIATENESS OF THE PARTICULAR PRODUCT WITH RESPECT TO THE BUYER’S APPLICATION, END PRODUCT, OR SYSTEM. BUYER SHALL TAKE THE APPLICATION RESPONSIBILITY IN ALL CASES, BUT THE FOLLOWING IS A NON-EXHAUSTIVE LIST OF APPLICATIONS FOR WHICH PARTICULAR ATTENTION MUST BE GIVEN: (i) Outdoor use; uses involving potential chemical contamination or electrical interference, or conditions or uses not described in this document. (ii) Use in consumer products or any use in significant quantities. (iii) Energy control systems, combustion systems, railroad systems, aviation systems, medical equipment, amusement machines, vehicles, safety equipment, and installations subject to separate industry or government regulations. (iv) Systems, machines, and equipment that could present a risk to life or property. NEVER USE THE PRODUCT FOR AN APPLICATION INVOLVING SERIOUS RISK TO LIFE OR PROPERTY OR IN LARGE QUANTITIES WITHOUT ENSURING THAT THE END PRODUCT AS A WHOLE HAS BEEN DESIGNED TO ADDRESS RELEVANT RISKS, AND THAT THE OMRON PRODUCT IS PROPERLY RATED AND INSTALLED FOR ITS INTENDED USE. YOI-E-03 © 2006 Omron Electronic Componenets Printed in the U.S.A. 06/2006 REQUIRED PRECAUTIONS www.components.omron.com USAcovers.indd 2-3 7/14/06 2:42:48 PM Relays - MOS FET G3VM-200 G3VM-350 G3VM High Voltage & Dielectric G3VM-400 General Attributes Dimensions mm (in) Relays - MOS FET Features Load voltage Please refer to specific data sheets for all dimensional information Please refer to specific data sheets for all dimensional information Please refer to specific data sheets for all dimensional information Please refer to specific data sheets for all dimensional information • Broad product offering • 1 & 2 channel • Broad product offering • Capable of switching • 10kV surge withstand configurations • Form A & Form B loads up to 600V models available • Ideal for Instrumentation, configurations (AC and DC) Broadband Systems, • Ideal for Instrumentation, • Ideal for Instrumentation, • 10kV surge withstand Broadband Systems, Measurement Devices, Broadband Systems, • Ideal for Measurement Devices, Data Loggers, Consumer Measurement Devices, Instrumentation, Data Loggers, Consumer Electronics, Medical Data loggers, Consumer Electronic Automatic Electronics, Security Equipment Electronics, Security Exchange Systems, Systems, Electronic Systems, Electronic Industrial Automation Automatic Exchange Automatic Exchange Systems, Measurement Systems, Industrial Systems, Industrial Devices, Security Automation Equipment, Automation Equipment, Systems, Medical Medical Equipment Medical Equipment Equipment G3VM Current Limiting Please refer to specific data sheets for all dimensional information • Current limiting of 150 to 300mA • Ideal for Electronic Automatic Exchange Systems, Multi-function Telephones, Cordless Telephones, Measurement Devices, Instrumentation 0-200V (AC or DC) 0-350V (AC or DC) 0-400V (AC or DC) 0-600V (AC or DC) 0-350V (AC or DC) 0-50mA & 0-200mA 0-90mA, 0-100mA, 0-110mA, 0-120mA, 0-150mA 0-120mA 0-100mA 0-120mA 5! & 30! 15!, 27!, 30!, 25!, 40! 17! & 18! 25! 22! Output capacitance _ _ _ _ _ Available switching configurations 1 Form A, 2 Form A 1 Form A, 1 Form B, 1 Form A + 1 Form B 2 Form A, 2 Form B 1 Form A, 2 Form A 1 Form A 1 Form A, 2 Form A 10nA (max.) & 1.0µA (max.) 1.0µA (max.) 1.0µA (max.) 1.0µA (max.) 1.0µA (max.) turn-ON time (typical) 40ms & 600ms 0.1ms, 0.25ms, 0.3ms, 0.5ms, 1.0ms 0.3ms & 0.5ms 0.2ms 0.3ms & 0.5ms turn-OFF time (typical) 100ms 0.1ms, 0.15ms, 0.5ms, 1.0ms, 3.0ms 0.1ms & 0.5ms 0.2ms 0.3ms & 0.5ms Dielectric strength (AC for 1 minute between input and output) 1,500Vrms (min.) 1,500Vrms (min.) 2,500Vrms (min.) 1,500Vrms (min.) 2,500Vrms (min.) 5,000Vrms (min.) 5,000Vrms (min.) 1,500Vrms (min.) 2,500Vrms (min.) Available packaging & terminal choices SOP 4 PIN, 6 PIN, 8 PIN PCB, SMT, SOP 4 PIN, 6 PIN, 8 PIN PCB, SMT, SOP 4 PIN, 6 PIN, 8 PIN PCB & SMT 6 PIN PCB, SMT & SOP 4 PIN, 6 PIN, 8 PIN Tape & reel Tape & reel Tape & reel Tape & reel Tape & reel UL 1577 UL 1577 UL 1577 UL 1577 UL 1577 Maximum Ratings and Electrical Characteristics Continuous load current ON resistance (typical) Leakage current Accessories Approved standards 4 ECbodyREADERS.indd 4 7/14/06 11:21:31 PM Relays - MOS FET General Attributes Dimensions mm (in) G3VM GR G3VM LR G3VM-60 G3VM-80 G3VM-22 Please refer to specific data sheets for all dimensional information Please refer to specific data sheets for all dimensional information • C x R characteristics as low as 5pF*! • Low leakage current • Very high operating speed • Ideal for IC and Memory Test Equipment, SoC Testers, Measurement Devices, Instrumentation, Medical Equipment, Broadband Systems, Data Loggers, Security Systems • Smallest MOS FET relay on the market • C x R characteristics as low as 5pF*! • Low leakage current • Very high operating speed • Ideal for IC and Memory Test Equipment, SoC Testers, Measurement Devices, Instrumentation, Medical Equipment, Broadband Systems, Data Loggers, Security Systems • High current switching • High current switching capability capability • Low ON-resistance • Low leakage current • Low leakage current • Ideal for Broadband • Cost effective solutions Systems, • Ideal for Measurement Measurement Devices, Devices, Instrumentation, Instrumentation, Medical Security Systems, Equipment, Data Medical Equipment, Loggers, Consumer Alarm Controls, Electronics Consumer Electronics • Single input channel with dual output channels • Low ON-resistance • Ideal for Inline Interface Applications, Data Loggers, ADSL Modems and Routers, Edge Routers, Data Storage Devices 0-20V (AC or DC) 0-40V (AC or DC) 0-20V (AC or DC) 0-40V (AC or DC) 0-60V (AC or DC) 0-80V (AC or DC) 0-20V (AC or DC) 0-120mA 0-160mA 0-300mA 0-120mA 0-160mA 0-300mA 0-450mA 0-400mA 0-500mA 0-1,000mA 0-2,000mA 0-2,500mA 0-350mA 0-1,250mA 0-150mA 1!, 5!, 10! 0.8!, 1!, 5!, 10! 0.12! (max.) 7! (max.) 1! (typ.) 0.11! & 1.0! 2! Output capacitance 1.0pF (typ.) 5.0pF (typ.) 10pF (typ.) 0.8pF (typ.) 1.0pF (typ.) 5.0pF (typ.) 10pF (typ.) _ _ _ Available switching configurations 1 Form A 1 Form A 1 Form A 1 Form A Dual 1 Form A 1.0nA (max.) 1.0nA (max.) 1.0nA (max.) & 1.0µA (max.) 0.2nA (typ.) & 1.2nA (typ.) 1.0µA (max.) turn-ON time (typical) 0.3ms 0.3ms 0.8ms 1.0ms 1.4ms 0.3ms 2.0ms 0.5ms turn-OFF time (typical) 0.3ms 0.3ms 0.1ms 0.2ms 0.6ms 0.3ms 0.7ms 0.5ms Dielectric strength (AC for 1 minute between input and output) 1,500Vrms (min.) 1,500Vrms (min.) 1,500Vrms (min.) 2,500Vrms (min.) 1,500Vrms (min.) 2,500Vrms (min.) Available packaging & terminal choices SOP 4 PIN SOP 4 PIN SOP, PCB, SMT 4 PIN, 6 PIN SOP 4 PIN, 6 PIN PCB & SMT 8 PIN Tape & reel Tape & reel Tape & reel Tape & reel Tape & reel UL 1577 UL 1577 UL 1577 UL 1577 UL 1577 Features Load voltage Maximum Ratings and Electrical Characteristics Continuous load current ON resistance (typical) Leakage current Accessories Approved standards Please refer to specific data sheets for all dimensional information Please refer to specific data sheets for all dimensional information Relays - MOS FET Please refer to specific data sheets for all dimensional information 5 ECbodyREADERS.indd 5 7/27/06 8:32:01 AM Relays - Low Signal General Attributes Dimensions mm (in) Switching Relays - Low Signal Features Contact Information Contact form Contact type G6J-Y G6K G6H G6S G6A 10.0 H x 10.6 L x 5.7 W (0.39 x 0.42 x 0.22) 5.30 H x 10.20 L x 6.70 W (0.21 x 0.40 x 0.26) 5.08 H x 13.97 L x 8.89 W 9.40 H x 15 L x 7.50 W (0.20 x 0.55 x 0.35) (0.37 x 0.59 x 0.30) 8.40 H x 20.20 L x 10.10 W (0.33 x 0.80 x 0.40) 1A max. 1A max. 1A max. 2A max. 2A max. • Slimline, 2 Form C, 1 Amp relay • SMT & PCB versions • 2.5kV surge withstand • Available in SMT & PCB • Latching & non-latching versions • Ideal for Telecom, Test & Measurement, Medical, Security, Computer Peripheral, Office Automation • Small real estate, 2 Form C, 1 Amp relay • 100mW power consumption • 2.5kV surge withstand • SMT & PCB versions • Latching & non-latching models • Ideal for Telecom, Test & Measurement, Medical, Security, Office Automation, Computer Peripheral • Low profile (5mm), 2 Form C, 1 Amp relay) • Available in SMT & PCB • 1.5kV surge withstand • 140mW power consumption • Ideal for Telecom, Test & Measurement, Medical, Security, Office Automation, Computer Peripheral • Industry standard, 2 Form C, 2 Amp relay • 2.5 kV surge withstand • SMT gullwing, SMT inside-L, PCB models • Latching & non-latching versions • European version available (supplementary insulation at 250V at pollution degree 2 per EN60950/EN41003) • Ideal for Telecom, Thermostats, Medical, Test & Measurement, Security • Industry standard, 2 Form C, 2 Amp relay • 200mW, 400mW versions • 2 Pole & 4 Pole models • Latching & non-latching versions • 1.5kV surge withstand • Ideal for Telecom, Test & Measurement, Security 2 Form C 2 Form C 2 Form C 2 Form C 2 Form C, 4 Form C Bifurcated crossbar Bifurcated crossbar Bifurcated crossbar Bifurcated crossbar Bifurcated crossbar Ag with Au alloy clad Ag with Au clad Ag with Au clad Ag with Au clad; AgPd with Au clad Ag with Au clad; AgPd with Au clad Rated load (under resistive load) 0.3A @ 125VAC, 1A @ 30VDC 0.3A @ 125VAC, 1A @ 30VDC 0.5A @ 125VAC, 1A @ 30VDC 0.5 @ 125VAC, 2A @ 30VDC 0.3A to 0.5A @ 125VAC, 1A to 2A @ 30VDC Max. operating voltage 125VAC, 110VDC 125VAC, 60VDC 125VAC, 110VDC 250VAC, 220VDC 250VAC, 220VDC Max. switching capacity under resistive load 37.5VA, 30W (NO) 37.5VA, 30W 62.5VA, 33W 62.5VA, 60W 125VA, 60W 100,000 100,000 100,000 100,000 500,000 10µA @ 10mVDC 10µA @ 10mVDC 10µA @ 10mVDC 10µA @ 10mVDC 10µA @ 10mVDC 3, 4.5, 5, 12, 24VDC 3, 4.5, 5, 6, 9, 12, 24VDC 3, 5, 6, 9, 12, 24, 48VDC 3, 4.5, 5, 6, 9, 12, 24VDC 3, 5, 6, 9, 12, 24, 48VDC 140mW (230mW for DC24) 100mW (standard and latching) 140mW (standard) 140mW (standard) 140mW, 200mW (latching) 200mW (DPDT standard) 180mW (DPDT latching) 360mW (4PDT standard) 1,500VAC 1,500VAC 1,000VAC 2,000VAC 1,000VAC Contact material Min. electrical service life (operations at rated load) Min. permissible load (for reference only) Coil Information Coil voltage Power consumption Characteristics Dielectric strength between coil & contacts (50/60 Hz for 1 minute) Surge withstand 2.5kV (2 x 10µs) 2.5kV (2 x 10µs) 1.5kV (10 x 160µs) 2.5kV (2 x 10µs) 1.5kV (10 x 160µs) Terminal choices SMT Gullwing, PCB SMT Gullwing, SMT Inside-L, PCB PCB (G6H), SMT Gullwing (G6H-2F) SMT Gullwing, SMT Inside-L, PCB PCB Tape & reel available Tape & reel available Tape & reel available Tape & reel available – Bellcore 2.5kV / Telcordia GR-1089-CORE 2.5kV between coil and contacts Bellcore 2.5kV / Telcordia GR-1089-CORE 2.5kV between coil and contacts UL, CSA, (FCC Part 68) Bellcore 2.5 kV / Telcordia UL, CSA, (FCC Part 68) GR-1089-CORE 2.5 kV (between coil and contacts) Packaging Approved standards 6 ECbodyREADERS.indd 6 7/23/06 6:42:10 PM Relays - Low Signal G5A General Attributes Dimensions mm (in) G5V-1 G6L G5V-2 G6E 10.0 H x 12.50 L x 7.50 W (0.39 x 0.49 x 0.30) 4.5 H x 10.6 L x 7.0 W (0.18 x 0.42 x 0.28 11.43 H x 20.32 L x 9.91 W (0.45 x 0.80 x 0.39) 8.38 H x 16 L x 9.9 W (0.33 x 0.63 x 0.39) 1A max. 1A max. 1A max. 2A max. 3A max. • General use, 2 Form C, 1 Amp relay • Semi-sealed or fullysealed construction • Ideal for Telecom, Security, Computer Peripheral, Office Automation • General use, 1 Form C, 1 Amp relay • 150mW power consumption •1.5kV surge withstand • Ideal for Telecom, Security, Computer Peripheral • Very low profile, 1 Form A, 1 Amp relay • 1.5kV surge withstand • SMT & PCB versions • Ideal for Security & General Use • 2 Form C, 1-2 Amp relay • Ideal for general use • Industry standard footprint • 150mW, 360mW & 500mW coil power versions • 1.5 kV surge withstand • General use, 1 Form C, 3 Amp relay • 2.5 kV surge withstand • 200mW, 400mW models • Latching and non-latching versions 2 Form C 1 Form C 1 Form A 2 Form C 1 Form C Bifurcated crossbar Single crossbar Single crossbar Bifurcated crossbar Bifurcated crossbar Contact material Ag with Au clad Ag with Au clad Ag with Au clad Ag with Au clad Ag with Au clad Rated load (under resistive load) 0.5A @ 24VAC, 1A @ 24VDC 0.5A @ 125VAC, 1A @ 24VDC 0.3A @ 125VAC, 1A @ 24VDC 0.5A @ 125VAC, 2A @ 30VDC 0.4A @ 125VAC, 2A @ 30VDC 125VAC, 125VDC 125VAC, 60VDC 125VAC, 60VDC 125VAC, 125VDC 250VAC, 220VDC 37.5VA, 33W 62.5VA, 30W 37.5VA, 24W 62.5VA, 60W 50VA, 60W 100,000 100,000 100,000 300,000 100,000 1mA @ 5VDC 1mA @ 5VDC 1mA @ 5VDC 10µA @ 10mVDC 10µA @ 10mVDC 5, 6, 9, 12, 24, 48VDC 5, 6, 9, 12, 24VDC 3, 4.5, 5, 12, 24VDC 3, 5, 6, 9, 12, 24, 48VDC 3, 5, 6, 9, 12, 24, 48VDC 200mW (standard & latching) 150mW 180mW (standard) 500mW (standard) 360mW (high-sensitivity) 150mW (ultra-sensitive) 200mW (standard) 400mW (standard) 1,000VAC 1,000VAC 1,000VAC 1,000VAC 1,500VAC Surge withstand _ 1.5kV (10 x 160µs) – 1.5kV (10 x 160µs) 2.5kV (2 x 10µs) Terminal choices PCB PCB PCB, SMT Gullwing PCB PCB – – Tape & reel available – – UL, CSA UL, CSA UL/CSA (FCC Part 68) UL, CSA UL/CSA (FCC Part 68) Bellcore 2.5kV / Telcordia GR-1089-CORE 2.5kV between coil and contacts Switching Features Contact Information Contact form Contact type Max. operating voltage Max. switching capacity under resistive load Min. electrical service life (operations at rated load) Min. permissible load (for reference only) Coil Information Coil voltage Power consumption Characteristics Dielectric strength between coil & contacts (50/60 Hz for 1 minute) Packaging Approved standards Relays - Low Signal 8.38 H x 16 L x 9.9 W (0.33 x 0.63 x 0.39) 7 ECbodyREADERS.indd 7 7/14/06 11:21:43 PM Relays - Low Signal RF/HF NEW! G6W General Attributes G6Y Dimensions mm (in) 8.9 H x 20 L x 9.4 W (0.35 x 0.79 x 0.37) 9.20 H x 20.70 L x 11.70 W 8.9 H x 20 L x 8.6 W (0.35 x 0.79 x 0.34) (0.36 x 0.81 x 0.46) Switching 0.5A max. Relays - Low Signal RF/HF G6Z G6K-RF G9YA 5.4 H x 10.3 L x 6.9 W (0.21 x 0.41 x 0.27) 39.0 H x 34.0 L x 13.2 W (1.54 x 1.34 x 0.52) 1A max. 0.5A max. 1A max. 100mA max. • 900MHz+ HF relay • 1 Form C • Micro strip line technology • Ideal for CATV, Digital TV tuners, Test & Measurement • 2.6GHz+ HF relay • 1 Form C • Micro strip line technology • 75 ! & 50 ! impedance models • Latching & non-latching models • Reverse terminal configurations • Y & E terminal configurations • SMT and PCB versions • Ideal for Base Station LNA & TMA switching, CATV, Digital TV tuners, Test & Measurement, Broadcast, FWA • 1GHz+ HF relay • 2 Form C • 100mW coil power • Smallest 2 Form C on the market • Ideal for Test & Measurement, CATV, Digital TV tuners • 26.5GHz bandwidth • Coaxial HF relay • 60dB isolation (26.5GHz) • Contact carry power of 120W at 3GHz • Available in failsafe & TTL-driven models • Also available in non-latching and dual latching configuraitons • Ideal for Mobile Communications Infrastructure Equipment, Broadcast Equipment, Test and Measurement Equipment, Wireless LAN 65dB (2GHz) 60dB (2.5GHz) 40dB (5.0GHz) 65dB (900MHz) 60 - 65dB (900MHz) 30 - 45dB (2.6GHz) 20 - 30dB (1GHz) 60dB (26.5GHz) 65dB (12.4GHz) Insertion loss 0.2dB (2GHz) 0.2dB (2.5GHz) 0.4dB (5.0GHz) 0.5dB (900MHz) 0.1 - 0.2dB (900MHz) 0.3 - 0.5dB (2.6GHz) 0.2dB (1GHz) 0.8dB (26.5GHz) 0.4dB (12.4GHz) 0.3dB (8GHz) 1.5 (900MHz) 1.1 - 1.2 (900MHz) 1.3 - 1.5 (2.6GHz) 0.2dB (1GHz) 1.7 (26.5GHz) 1.35 (12.4GHz) 1.25 (8GHz) 1 Form C 1 Form C 2 Form C 1 Form C Twin crossbar Twin crossbar Bifurcated crossbar Twin crossbar Contact material Au clad Cu alloy Au clad Cu alloy Au clad Cu alloy Au alloy on Ag base Au clad Cu alloy Rated load 10mA @ 30VAC (under resistive load) 10mA @ 30VDC 2.5GHz, 10W 10mA @ 30VAC; 10mA @ 30VAC; 900 MHz, 1W 10mA @ 30VAC; 10mA @ 30VDC; 900MHz, 10W 0.3A @ 125VAC; 1A @ 30VDC 100mA @ 30VDC 30VDC, 30VAC 30VDC, 30VAC 60VDC, 125VAC 30VDC 10VA, 10W 10VA, 10W 37.5VA, 30W 120W (3GHz) Min. electrical service life 300,000 300,000 300,000 300,000 5,000,000 Coil Information Coil voltage 3, 4.5, 9, 12, 24VDC 3, 4.5, 5, 6, 9, 12, 24VDC 3, 4.5, 5, 9, 12, 24VDC 3, 4.5, 5, 6, 9, 12, 24VDC 4.5, 5, 12, 15, 24, 28VDC 200mW 200mW (standard) 200mW (single latching) 360mW (dual latching) 100mW 500mW (dual latching) 700mW (failsafe) 1,000VAC 1,000VAC 750VAC 500VAC PCB PCB, SMT Gullwing SMT Gullwing SMA Terminals, Solder Terminals, Pin Terminals – Tape & reel available – Connector Cables Features • 5GHz+ HF relay • 1 Form C • Tri-plate micro strip line technology • Latching & non-latching models • SMT and PCB versions • Ideal for Base Station LNA & TMA switching, Test & Measurement, Broadcast, FWA HF Characteristics Isolation VSWR 1.2 (2GHz) 1.2 (2.5GHz) 1.5 (5.0GHz) Contact Information Contact form 1 Form C Contact type(s) Twin crossbar Max. operating voltage 30VDC, 30VAC Max. switching capacity 10VA, 10W under resistive load (operations at rated load) Power consumption 200mW (standard) 200mW (single latching) 360mW (dual latching) Characteristics Dielectric strength 1,000VAC between coil & contacts (50/60 Hz for 1 minute) Terminal choices PCB, SMT Gullwing Packaging / Options – 8 ECbodyREADERS.indd 8 www.components.omron.com 7/14/06 11:21:45 PM Relays - Power PCB NEW! NEW! G5NB General Attributes Dimensions mm (in) 15.3 H x 20.5 L x 7.2 W (0.60 x 0.81 x 0.28) NEW! G5NB-E G5SB G6D-ASI 15.8 H x 20.3 L x 10.3 W (0.62 x 0.80 x 0.41) 12.5 H x 17.5 L x 6.5 W (0.49 x 0.69 x 0.26) 3A/5A 5A(NO)/3A(NC) 5A • High capacity 5A version available • Meets EN tracking resistance CTI>250 • HA version for home appliances • Small compact form for 10 kV impulse and 5A switching capability • Meets EN tracking resistance CTI>250 • High insulation between coil & contact • Impulse withstand of 8kV • Fully Sealed • Incorporates 5A NO contact • Subminiature, slim lightweight design • Low power consumption • Fully Sealed 1 Form A 1 Form A 1 Form A 1 Form A Single button Single button Single button Single button AgNi AgSnIn AgNi/AgSnIn AgNi/AgSnIn (resistive load) 200,000 (resistive): 3A @ 125VAC/30VDC 200,000 (resistive): 3A @ 30VDC 100,000: 5A @ 250VAC For resistive loads: 300,000: 2A @ 30VDC/250VAC 200,000: 3 A (NO)/3 A (NC) at 70,000: 5A @ 30VDC/250VAC 125 VAC; 50,000: 5 A (NO)/3 A (NC) at 125 VAC; 50,000: 5 A (NO) at 250 VAC; 10,000: 3 A (NC) at 250 VAC; 10,000: 5 A (NO)/3 A (NC) at 30 VDC Max. switching capacity (and resistive load) 375VA, 90W 1,250VA, 90W 1,250VA, 150W(NO) 750VA, 30W(NC) 1,250VA, 150W Minimum permissible load (for reference only) 10mA @ 5VDC 10mA @ 5VDC 10mA @ 5VDC 10mA @ 5VDC 5, 12, 18, 24VDC 5, 9, 12, 24VDC 5, 12, 24, 48, 110/120VDC Switching 3A/5A Features Contact Information Contact form Contact type(s) Contact material(s) Electrical service life (@ 1800 ops./hr.) Coil Information Coil voltage 5, 12, 18, 24VDC Power consumption 200mW 200mW 400mW 200mW Insulation class Class A Class B Class B Class B -40 to +70°C -40 to +85°C -40 to +70°C -25 to +70°C 10kV 10kV 8kV 6kV 4,000VAC (coil-contact) 750VAC (open contacts) 4,000VAC (coil-contact) 750VAC (open contacts) 4,000VAC (coil-contact) 1,000VAC (open contacts) 3,000VAC (coil-contact) 750VAC (open contacts) PCB PCB PCB PCB Semi-sealed Semi-sealed Semi-sealed Semi-sealed N/A N/A N/A Socket for back connecting, sockets with PCB terminals UL, CSA, VDE UL, CSA, VDE UL, CSA, VDE UL, CSA, TUV, SEV Characteristics Operating temperature Impulse withstand voltage (1.2 x 50µ sec. unless noted) Dielectric strength (50/60 Hz for 1 minute) Terminal choices Protection level Accessories Approved standards Relays - Power PCB 15.3 H x 20.5 L x 7.2 W (0.60 x 0.81 x 0.28) max. 9 ECbodyREADERS.indd 9 7/14/06 11:21:49 PM Relays - Power PCB NEW! NEW! G6DS General Attributes Dimensions mm (in) 12.4 H x 20 L x 5.0 W (0.60 x 0.81 x 0.28) G2RG G6B 25.5 H x 29 L x 13 W (1.00 x 1.14 x 0.51) 9.91 H x 20.07 L x 9.91 W (0.39 x 0.79 x 0.39) 5A 8A 8A/5A • Slim 5mm for max. density mounting • Slim 5mm width, & reduced • High sensitive coil option reduces PCB area (103mm2) ideal for power consumption high-density mounting • Meets EN reinforced insulation • Highly efficient magnetic circuit requirement for control equipment for high sensitivity • Fully sealed • UL Class I, Division II approved • Resistant to mechanical shock for hazardous locations • 1.5mm contact gap x 2 poles=3mm total gap meeting UPS standards • Dimensions & mounting holes are same as G2R relay series • Sealed construction, standard • Meets EN tracking resistance CTI > 250 • UL508/CSA 22.2 • Subminiature and low power • Sealed construction standard • Single & dual coil latching available 1 Form A 1 Form A 2 Form A 1 Form A, 2 Form A, 2 Form B 1 Form A + 1 Form B Single button Single button Single button Single button AgNi Ag-Alloy AgSnO2 AgSnO2 100,000: 5A @ 30VDC/250VAC 80,000 (high sensitivity): 5A @ 30VDC/250VAC 100,000: 3A @ 30VDC/250VAC 6,000: 5A @ 250VAC/24VDC 10,000: 8A @ 250VAC 100,000: 5A @ 30 VDC/250VAC 8A @ 30 VDC/250VAC (highcapacity) Max. switching capacity (resistive load) 1,250VA, 150W 750VA, 90W 2,000 VA 1,250VA, 150W 2,000VA, 240W (high-capacity type) Minimum permissible load (for reference only) 5mA @ 24VDC 10mA @ 5VDC 10mA @ 5VDC 10mA @ 5VDC 5, 12, 24VDC 12, 24VDC 5, 6, 12, 24VDC 180mW 120mW (high-sensitivity) 120mW 800mW 200mW (1 pole) 300mW (2 pole) Class B Class B Class B Class A -40 to +85°C -40 to +85°C -40 to +70°C -25 to +70°C 6kV 5.08kV 10kV — 3,000VAC (coil-contacts) 750VAC (open contacts) 3,000VAC, (coil-contact) 750VAC, (open contacts) 5,000VAC, (coil-contact) 3,000VAC, (contacts pole-pole) 1,000VAC (open contacts) 4,000VAC (coil-contact) 2,000VAC (contacts pole-pole) 1,000VAC (open contacts) PCB PCB PCB PCB Fully Sealed Fully sealed Fully sealed Fully sealed Socket for back connecting, sockets with PCB terminals N/A N/A Sockets & clips for back connecting sockets with PCB terminals UL, CSA, VDE UL, CSA, VDE, EN, IEC 61131-2, IEC 61010 UL, CSA, VDE (O700/0110) UL, CSA, (FCC Part 68) SEV, TUV, IEC Switching 5A Features Contact Information Contact form Relays - Power PCB G6M 17.7 H x 20.3 L x 5.08 W (0.70 x 0.80 x 0.20) Contact type(s) Contact material(s) Electrical service life (@ 1800 ops./hr.) (resistive load) Coil Information Coil voltage 5, 12, 24VDC Power consumption Insulation class Characteristics Operating temperature Impulse withstand voltage (1.2 x 50µ sec. unless noted) Dielectric strength (50/60 Hz for 1 minute) Terminal choices Protection level Accessories Approved standards 10 ECbodyREADERS.indd 10 7/14/06 11:22:05 PM Relays - Power PCB NEW! G6RN General Attributes Dimensions mm (in) 15 H x 28.5 L x 10 W (0.59 x 1.12 x 0.39) Switching 8A NEW! G5LE/-E G5LB/-25 G5Q 19 H x 22.5 L x 16.5 W (0.75 x 0.89 x 0.65) 15.2 H x 19.6 L x 15.6 W (0.60 x 0.77 x 0.61) 15.8 H x 20.3 L x 10.3 W (0.62 x 0.80 x 0.41) 10A 10A (NO contacts) • Small "sugar cube" size used as common platform • Sealed construction optional • High capacity contacts:-E •Increased (0.8) contact gap:-G8 • Special application versions available • Sealed construction optional • 10A switching in low profile "sugar cube" package • Optional -25 type meets stringent EU requirements, including tracking resistance CTI > 250 & extended life • 4.5kV impulse withstand • Low power consumption • Compact PCB relay with high insulation • Withstands impulse of 8kV coil-contacts • Meets EN tracking resistance CTI >250 • Class F coil insulation standard • Low power consumption 1 Form A, 1 Form C 1 Form A, 1 Form C 1 Form A, 1 Form C 1 Form A, 1 Form C Single button Single button Single button Single button AgNi +gold plating AgSnO2 /AgSnIn (either with gold plating option) AgSnO2 AgNi Electrical service life (@ 1800 ops./hr.) (resistive load) 100,000: 8A @ 250VAC 5A @ 30VDC 100,000: 100,000: 13A @ 120VAC (@ 85°C/87°C) 10A @ 120VAC/250VAC 5A @ 250 VAC (AgSnO2) 8A @ 30VDC 6 FLA, 6 LRA @ 120VAC @ 85°C TV-5 @120VAC 50,000: 10A @ 250VAC 50,000 16A @ 250VAC 1/8 HP @ 120 VAC (@ 85°C) 30,000: 12A @ 120VAC 200,000: 3A (NO)/3 A (NC) @ 125VAC 100,000: 3A (NO)/3 A (NC) @ 250VAC 5A (NO)/3 A (NC) @ 30VDC 50,000: 10A (NO) @125VAC (900 ops. per hour) Max. switching capacity (resistive load) 2,000VA,150W 1,200VA,240W 1,200VA, 240W 2,500VA, 240W (-25 type) 1,250VA,150W (NO) 375 VA, 90W (NC) Minimum permissible load (for reference only) 10mA @ 5 VDC 100mA @ 5VDC, 100mA @ 5VDC 10mA @ 5VDC 5, 6, 9, 12, 24, 48VDC 3, 5, 6, 9, 12, 24, 36, 48VDC 5, 12, 24VDC 220mW, 250mW (DC24/48) 400mW /360mW available 360mW (standard) 400mW (“-40” style) 600mW (“-60” style) 400mW Form C 200mW Form A Class B Class B, F (UL/CSA ONLY) Class B, F (-25 type) Class F -40 to +85°C -40 to +85°C -40 to +85°C -40 to +105°C — 4.5kV 4.5kV 8kV 4,000VAC (coil-contact) 1,000 (open contacts) 2,000VAC (coil-contact) 750VAC (open contacts) 2,000VAC (coil-contact) 750VAC (open contacts) 4,000VAC (coil-contact) 1,000VAC (open contacts) PCB PCB PCB PCB Sealed Standard: Semi-sealed/vented, Option: sealed Standard: Semi-sealed/vented, Option: sealed Standard: Semi-sealed/vented, Option: sealed N/A N/A N/A N/A UL, CSA, VDE UL, CSA, TUV, VDE UL, CSA, VDE UL, CSA, VDE Contact Information Contact form Contact type(s) Contact material(s) Coil Information Coil voltage 5, 6, 12, 24, 48VDC Power consumption Insulation class Characteristics Operating temperature Impulse withstand voltage (1.2 x 50µ sec. unless noted) Dielectric strength (50/60 Hz for 1 minute) Terminal choices Protection level Accessories Approved standards Relays - Power PCB 10A (16A for Semi-sealed "E" type) • 8 mm coil/contact creepage • Low profile • Sealed construction standard • Ideal for switching contactors, solenoids & motors Features 11 ECbodyREADERS.indd 11 7/14/06 11:22:22 PM Relays - Power PCB NEW TYPES G6C General Attributes Dimensions mm (in) 9.91 H x 20.07 L x 14.99 W (0.39 x 0.79 x 0.59) Switching 10A Relays - Power PCB Features Contact Information Contact form • Low power consumption for high power switching • Low profile 10A power relay • Single & dual coil latching types available • Sealed construction available • Meets EN tracking resistance CTI > 250 G5CA G5PA-1 G8PT 11 H x 16 L x 22 W (10A) (0.43 x 0.63 x 0.87) 11 H x 22 L x 25 W (15A) 25 H x 24 L x W 10 (0.985 x 0.95 x 0.40) Multiple, refer to catalog. Basic: 20.1(H)x 32.1(L) x 27.7(W) 10A (15A high capacity) 5A (10A option) 30A (SPST) 10A-30A (SPDT) • Fully sealed or flux-sealed • High capacity versions • High sensitivity types • PCB or PCB+QC versions • Ideal for TVs, tuner, & audio power supply switching, both front panel and remote controlled. Also auxiliary switched power outlets on tuners and TVs. • A variety of versions in a single standard package meet most UL/FCC power isolation requirements • Rated to 100A inrush @ 250 VAC for minimum 40,000 operations • Industry standard form with 30A switching • UL Class F insulation standard • Wide range of coil ratings • Various sealing forms: open frame, vented/flux sealed, fully sealed • UL508/UL873 Column A spacings • Meets EN Tracking resistance CTI > 175 • High dielectric at open contacts 1 Form A + 1 Form B, 1 Form A 1 Form A 1 Form A 1 Form A, 1Form C Single button Single button Single button Single button Ag-Alloy AgSnIn AgSnO2 AgSnIn (other alloys available) 100,000: 10A @ 30VDC/250VAC 100,000: 10A @ 30VDC 15A @ 110VAC (high capacity) 10A @ 250VAC (fully sealed, std) 300,000: 10A @ 250VAC (semi-sealed) 30,000: 54@277 VAC 5A @ 30VDC / 277VAC (high capacity type) 25,000: TV-5 TV-8 (optional) 6,000: 5A @ 30VDC 100,000: 10A @ 250 VAC (high-capacity type) 100,000: 30A @ 277VAC (NO) 50,000: 30A @ 277VAC (NC) Consult catalog for other ratings Max. switching capacity 2,500VA, 300W (resistive load) 2,000VA, 240W (latching) 2,500VA, 300W N/A 1 Form A: 7,500VA, 560W Minimum permissible load (for reference only) 10mA @ 5VDC 100mA @ 5VDC 10mA @ 5 VDC 500mA @ 5VDC 3, 5, 6, 12, 24VDC 5, 12, 24VDC 5, 6, 9, 12, 24 VDC (4.5 VDC non-standard) 5, 9, 12, 24, 48, 110VDC Other coil voltages available 200mW (monostable & single coil latching) 280mW (dual coil latching) 200mW (standard & high capacity) 150mW (high sensitivity) 250mW 530mW (high capacity, extended electrical life) 150mW (under development) 900mW Class A Class B Class B Class F -40 to +70°C -25 to +70ºC -40 to +70°C -55°C to +105°C 4.5kV 4.5kV 10kV 12kV 6kV 2,000VAC (coil -contact) 2,000VAC (contacts pole-pole) 1,000VAC (open contacts) PCB, self clinching 2,500VAC (coil-contact) 1,000VAC (open contacts) 4,000VAC (coil-contacts) 1,000VAC (open contacts) 2,500VAC, (coil-contact) 1,500VAC, (open contacts) PCB Optional: PCB+quick-connect contact terminals PCB PCB (optional self-clinching) PCB coil /quick connect contact Flange mount all quick connect Semi-sealed Fully sealed option Semi-sealed Fully sealed option Semi-sealed Open frame, Vented/semi-sealed, Fully sealed Socket for QC contact terms., PCB terms., socket clip N/A N/A N/A UL, CSA, VDE, SEV UL, CSA, SEV, SEMKO, IEC/TUV UL, CSA, SEMKO TUV, VDE UL, CSA, VDE Contact type(s) Contact material(s) Electrical service life (@ 1800 ops./hr.) (resistive load) Coil Information Coil voltage Power consumption Insulation class Characteristics Operating temperature Impulse withstand voltage (1.2 x 50µ sec. unless noted) Dielectric strength (50/60 Hz for 1 minute) Terminal choices Protection level Accessories Approved standards 12 ECbodyREADERS.indd 12 1 Form C: 5000/2500VA, 560W/280W* * N.O. Contact / N.C. Contact 7/14/06 11:22:28 PM Relays - Power PCB NEW! G2R General Attributes Dimensions mm (in) G2RL NEW! G5RL G2RL-TP 15.5 H x 29 L x 12.7 W (0.61 x 1.14 x 0.50) 15.7 H x 28.8 L x 12.5 W (0.61 x 1.14 x 0.49) 15.7H x 40.4 L x 12.5 W (0.61 x 1.60 x 0.49) 16A max. 16A max. 16A max. (NO), 5A max. (NC) 16A max. Features • High dielectric withstand • 8mm coil/contact spacing • 1 & 2 pole models • 3mm contact gap version available (see G2RG) • Meets EN tracking resistance CTI > 250 • Low profile for power rating • High isolation • Class F insulation option • Low power consumption • Quick connect terminal option • Meets EN tracking resistance CTI > 250 • High dielectric due to large internal creepage distances. • AC coil in industry standard package • Increased temperature & insulation ratings in low profile package. • Simplifies PCB design by allowing removal of high power PCB tracings. • Contact/load terminals in both 5mm for RAST5 connection & 7.5mm existing standard • Single mounting/soldering process for both types of terminals reduces PCB assembly costs. Contact Information Contact form 1 Form A, 1 Form C, 2 Form A, 2 Form C 1 Form A, 1 Form C, 2 Form A, 2 Form C 1 Form C 1 Form A Single button, bifurcated button Single button (bifurcated available) Single button Single button Ag alloy AgSnO2 (1 pole); AgNi (2 pole) AgSnIn Ag alloy Electrical service life (@ 1800 ops./hr.) (resistive load) 100,000: (high-capacity type) 16A @ 30VDC/250VAC Consult catalog for other ratings 100,000: 16A @ 250VAC 6,000: 25A @ 240VAC Consult catalog for other ratings 50,000: 16A @ 24VDC/277VAC (NO) 25,000: TV-5 (NO) 50,000: 16A @ 24VDC/277VAC 20A @ 24 VAC (@ 85ºC) 25,000: TV-5 Max. switching capacity (resistive Load) 4,000VA, 480W (high-capacity 1 pole) Consult catalog for other ratings 4,000VA, 384W (high-capacity 1 pole) Consult catalog for other ratings 4,000VA, 384W (NO) 1,250VA, 120W (NC) 4,000VA, Minimum permissible load (@1800 ops./hr.) 1 pole: 100mA @ 5VDC; 2 pole: 10mA @ 5VDC 40mA, 24VDC 40mA @ 24VDC Switching Contact type(s) Contact material(s) Coil Information Coil voltage Power consumption 12, 18, 24, 48, 50, 100, 110/120, 5, 12, 24, 48VDC 110, 120, 200/220, 220, 230, 240VAC 5, 6, 9, 12, 18, 24, 48,60, 100, 110VDC — 24, 100, 115/120, 200, 230/240 VAC 12, 24VDC 5, 12, 24, 48VDC Consult catalog for other coil voltages 0.9VA, 530mW (standard) 360mW (high sensitivity) 850mW (latching set), 600mW (latching reset) 400mW (430mW for 48VDC) 0.75VA 400mW (430mW @ 48VDC) 400mW (430mW for 48VDC) Class B available Class F — Class F Characteristics Operating temperature -40 to +70°C (+85°C option) -40 to +85°C -40 to +70°C (AC coil) -40 to +85°C (DC coil) -40 to +105°C Impulse withstand voltage (1.2 x 50µ sec. unless noted) 10kV 10kV 10kV 10kV 5,000VAC (coil-contact) 1,000 VAC (open contacts) 5,000VAC (coil-contact) 1,000 VAC (open contacts) 6,000VAC (coil-contact) 1,000VAC (open contacts) 5,000 VAC, (coil-contact) 1,000 VAC, (open contacts) PCB, plug in quick-connect (flange mount) PCB, optional quick-connect contact terminals (-TP type) PCB PCB (coil terminals) Quick-connect (contact terminals) Semi-sealed Fully sealed option Semi-sealed Fully sealed option Semi-sealed Semi-sealed N/A N/A N/A N/A UL, CSA, SEV SEMKO, VDE, TUV UL, CSA, VDE UL, CSA, VDE UL, CSA, EN 60335 Insulation class Dielectric strength (50/60 Hz for 1 minute) Terminal choices Protection level Accessories Approved standards Relays - Power PCB 25.5 H x 29 L x 13 W (1 x 1.14 x 0.51) 13 ECbodyREADERS.indd 13 7/14/06 11:22:44 PM Relays - DC Power The switching and driving sections are isolated, gas injected and hermetically sealed. This advanced construction requires no arc space, saves space, & helps ensure safety. General Attributes G9EA Model G9EA-1(-B) G9EC G9EA-1(-B)-CA G9EB (-1B) G9EC-1(-B) High-current conduction Switching/current conduction Switching/current conduction Smallest in series 250VDC, 25A loads Largest capacity in series Carries/switches 400V, 200A loads SPST-NO SPST-NO SPST-NO Double-break, single Double-break, single Double-break, single 10m! max. (0.3m! typical) 30m! max. 30m! max. (0.2m! typical) 0.1V max. (for a carry current of 100A) 0.1V max (for a carry current of 25A) 0.1V max. (for a carry current of 200A) 400VDC, 30A, 1,000 operations min. 120VDC, 30A, 2,500 operations min. 250VDC, 25A, 30,000 operations min. 400VDC, 200A, 3,000 operations min. 30A 25A 200A 100A 25A 200A Short-time carry current 100A (10 min.) 150A (10 min.) 50A (5 min.), 40A (10min.) 300A (15min.) *Max. interruption current 600A @ 300VDC (5 times) — 100A @ 250VDC (5 times) 1,000A @ 400VDC (10 times) 100A @ 120VDC (150 times min.) 50A @ 250VDC (50 times min.) 700A @ 400VDC (40 times min.) — -200A @ 200VDC (1,000 times min.) 12, 24, 48, 60 & 100VDC 12, 24, 48, 60 & 100VDC 12, 24, 48, 60 & 100VDC Approx. 5 to 5.4W Approx. 2W Approx. 11W 200,000 operations min. 100,000 operations min. 200,000 operations min. Insulation resistance Between Coil & Contacts 1,000M! min. 1,000M! min. 1,000M! min. 1,000M! min. Between contacts of the same polarity 1,000M! min. 1,000M! min. 1,000M! min. 1,000M! min. Dielectric strength Between coil & contacts 2,500VAC for 1min. 2,500VAC for 1min. 2,500VAC for 1min. 2,500VAC for 1min. Between contacts of the same polarity 2,500VAC for 1min. 2,500VAC for 1min. Classification Switching/current conduction Carries 100A Features Standard compact model carries/switches 400VDC, 60A loads Low contact resistance when carrying current Contact Information Contact Form SPST-NO Contact structure Double-break, single Contact resistance 30m! max. (0.6m! typical) Switching voltage drop 0.1V max. (for a carry current of 60A) Relays - DC Power G9EB *Electrical endurance 120VDC, 100A, 3,000 operations min. 400VDC, 60A, 3,000 operations min. 400VDC, 30A, 30,000 operations min. Max. switching current 100A Rated carry current 60A *Overload interruption 180A @ 400VDC (100 times min.) Reverse polarity -60A @ 200VDC (1,000 times min.) — interruption Coil Information Rated voltage 12, 24, 48, 60 & 100VDC Power consumption Approx. 5 to 5.4W Mechanical endurance 200,000 operations min. 2,500VAC for 1min. 2,500VAC for 1min. 4,500V 4,500V 4,500V -40 to +70°C (with no icing or condensation) -40 to +70°C (with no icing or condensation) -40 to +50°C (with no icing or condensation) Terminals Screw terminals Yes Yes Yes Yes Lead wire output Yes Yes Yes Yes Impulse withstand voltage 4,500V Ambient operating -40 to +70°C temperature (with no icing or condensation) *When using a varistor as protective circuit against reverse surge in the relay coil 14 ECbodyREADERS.indd 14 7/14/06 11:22:49 PM Relays - General Purpose MY4H General Attributes Dimensions mm (in) 35 H x 28.5 L x 22 W (1.38 x 1.12 x 0.87) MK MY LY 36 H x 28 L x 21.5 W (1.42 x 1.10 x 0.85) 35.56 H x 27.94 L x 21.59 W (1.40 x 1.10 x 0.85) 10 A max. 10A (2 pole); 5 A (4 pole) 15A • Full hermetic seal for hazardous applications • UL Class1, Division II approved • Signal level switching option using bifurcated contacts • Octal base plug-in • Exceptional reliability • Push-to-test button standard • CENELEC conformity • Exceptional reliability • Push-to-test button standard • Arc barrier built into 4 pole • Built in diode (DC) or C/R Circuit • Name plate and mechanical indicator, standard • Compact power relay • LED, Push-to-test button, bifurcated contacts and other features available • Space efficient power switching • Extended life to 500,000/200,000 operations 4 Form C 2 Form C, 3 Form C 2 Form C, 4 Form C 1 Form C, 2 Form C, 3 Form C, 4 Form C Single button, bifurcated button Single button Single button, bifurcated button Single button, bifurcated AgSnIn Ag (fine silver) AgNi Ag-Alloy 100,000 min. 3A@24VDC/110VAC (50,000 min. bifurcated) 100,000 min. 10A @ 28VDC/250VAC 2P 500,000: 5A @ 30VDC/250VAC 4P 200,000: 3A @ 30VDC/250VAC 100,000: 3A@30VDC/250VAC (bifurcated) 200,000 min: 15A @ 24VDC/110VAC 10A @ 24VDC/110VAC 500,000 min: (2 pole) 10A @ 110VAC Max. switching capacity (resistive load) 330VA, 72W 2,500VA, 280W 2,500VA, 300W 1,250VA, 150W (4-pole) 1,700VA, 360W (1 pole) 1,100VA, 240W (2, 3, 4 pole) 550VA, 120W (bifurcated) Minimum permissible load (@1800 ops./hr.) 100µA @ 1VDC for MY4H 100µA @ 100mVDC for MY4ZH (Bifurcated contacts) 100mA @ 1VDC 2 pole: 1mA @ 5VDC 4 pole: 1mA @ 5VDC 10µA @ 1 VDC (bifurcated contacts) 100mA @ 5VDC 10mA @ 5VDC (bifurcated contacts) 12, 24, 110/120, 220/240VAC; 12, 24, 48, 100VDC 6, 12, 24, 48, 110/120, 220/240 VAC; 6,12, 24, 48, 100/110VDC 12, 24, 110/120, 220/240VAC, 12, 24, 48, 100VDC 900 mW; 0.9 - 1.1VA 2.7VA, 1.5W AC Coil: 0.9 to 1.2VA DC Coil: 0.9W 1.1VA, 0.9W (1 pole); 1.1VA, 0.9W (DPDT); 1.6VA, 1.4W (3PDT); 1.95VA, 1.5W (4PDT) — N/A Class A Class A -25°C to +60°C -10°C to +40°C -55°C to +70°C -25°C to +70°C — — — — 1,000VAC (coil-contact) 1,000VAC (contacts pole pole) 700VAC (open contacts) 2,500VAC (coil-contact) 1,000VAC (open contacts) 2,000VAC (coil-contact) 1,000VAC (open contacts) 2,000VAC (coil-contact) 1,000VAC (open contacts) Plug-in Plug-in PCB, plug-in Track mounted socket PCB with .187/.250 QC Unsealed, semi-sealed Switching 3A Features Contact Information Contact form Contact type(s) Contact material(s) Electrical service life (@ 1800 ops./hr.) (resistive load) Coil Information 24, 110/120VAC Coil voltage 12, 24VDC Power consumption Insulation class Characteristics Operating temperature Impulse withstand voltage (1.2 x 50µ sec. unless noted) Dielectric strength (50/60 Hz for 1 minute) Terminal choices Protection level Accessories Approved standards Hermetic seal Unsealed Unsealed PYF14A-E Socket PYC-A1 Clip Sockets & clips for track mount sockets with screw terminals, & back connecting sockets with solder & PCB terminals Sockets & clips for track mount sockets with screw terminals, & back connecting sockets with solder & PCB terminals. Note: PYF-S series screwless clamp terminal socket available Mounting rails= PFP Sockets & clips for track mount sockets with screw terminals, & back connecting sockets with solder & PCB terminals UL, CSA UL, CSA, TUV, VDE, SEMKO UL, CSA, SEV, CE, VDE, IMA UL, CSA, SEV, VDE, CE (UL, CSA only with varistors) Relays - General Purpose 52.58 H x 34.54 L x 34.54 W (2.07 x 1.36 x 1.36) 15 ECbodyREADERS.indd 15 7/14/06 11:22:57 PM Relays - General Purpose NEW! G2RV General Attributes Dimensions mm (in) 91.0 H x 94.0 L x 6.1 W (3.58 x 3.7 x 0.24) Relay & terminal block Switching 6A max. Relays - General Purpose Features G2R-S (S) G7J G7L 35.5 H x 29 L x 13 W (1.40 x 1.14 x .51) 64 H x 53.5 L x 34.5 W (2.52 x 2.11 x 1.36) 49.02 H x 68.58 L x 34.54 W (1.93 x 2.70 x 1.36) 1 pole: 10A max. 2 pole: 5A max. 25A max. 30A max. • Variety of contact forms • Ideal for 3 phase motor control • 4 pole mini contactor • DIN rail mountable • Minimal chattering • UL94V-0 • Reliable high power relay • 3 mm contact gap • Conforms to IEC 950/UL 1950 • Class B insulation standard • Most cost effective solution in its class. • Ideal for pump, motor loads • Nameplate and mechanical flag • Slimmest control relay available indicator standard • Capable of switching both electrical • LED diode, and lockable test control loads (6A) and signal level button option available loads (1mA) • Socket mount 10A relay (1-pole) • Relay available separately • Sealed for unprotected environments Contact Information Contact form 1 Form C 1 Form C 2 Form C 4 Form A, 3 Form A/1 Form B, 2 Form A/2 Form B 1 Form A-(Double Make) 2 Form A-(Double Make) Contact type(s) Crossbar Single button, bifurcated crossbar Single button Single button Ag Alloy Ag Alloy Ag Alloy Ag Alloy 6,000: 6A @ 30 VDC /250VAC 100,000 min. (at rated loads) 100,000 min. (at rated loads) 100,000 min. (at rated loads) (see data sheet for more information) (see data sheet for more information) (see data sheet for more information) 1,500VA, 18W (resistive load) 2,500VA, 300W (1-pole resistive load) 5,500VA, 750W (NO contacts) 1,760VA, 240W (NC contacts) 4,400VA 5mA @ 5VDC 100mA @ 5VDC , 10mA @ 5VDC (2 pole) 100mA @ 24VDC 100mA @ 5VDC 6, 12, 24, 48VDC; 24, 110 120, 230, 240VAC 6, 12, 24, 48, 100/110VDC; 6, 12, 24, 50, 100/120, 200/240VAC 12, 24, 48, 100VDC; 12, 24, 100/120, 200/240VAC Contact material(s) Electrical service life (@ 1800 ops./hr.) (resistive load) Maximum switching capacity Minimum permissible load (@1800 ops./hr.) 12, 24, 48VDC Coil Information Coil voltage 24, 48, 110, 230VAC Power consumption 300mW 0.9VA, 0.53W 1.8 to 2.6VA, 2.0W 1.7 to 2.5VA, 1.9W Insulation class Class A Class A Class A, Class B (available) Class B -40ºC to +60ºC -40 to +70°C -25ºC to +60°C -20ºC to +85°C 6kV 8kV 10kV (coil-contacts) 10kV (coil-contacts) 4,000VAC (coil-contacts) 1,000VAC (open contacts) 1 pole: 5,000VAC (coil-contacts) 1,000VAC (open contacts) 2 pole: 5,000VAC (coil-contacts) 3,000VAC (different polarity) 1,000VAC (open contacts) 4,000VAC (coil-contacts) 4,000VAC (different polarity) 2,000VAC (open contacts) 4,000VAC (coil-contacts) 2,000VAC (different polarity) 2,000VAC (open contacts) Quick-connect, screw, PCB Quick-connect, screw, PCB Characteristics Operating temperature Impulse withstand voltage (1.2 x 50µ sec. unless noted) Dielectric strength (50/60 Hz for 1 minute) Terminal choices Protection level Accessories Approved standards Plug-in Relay: Quick-connect Socket: screw terminals, push-in wire connections (sold separately) Semi-sealed Unsealed Unsealed Semi-sealed Unsealed Semi-sealed Socket: G2RV-SL (UL 508) SSR Option: G3MB / G3MC Sockets for track mount, sockets with screw terminals, & back connecting sockets with solder & PCB terminals. Note: P2RF-S series screwless clamp terminal socket available. SSR option: G3R. R99-04V for G5D W-bracket R99-07G5D E bracket; P7LF-D adapter; P7LF-06 front connecting socket UL, CSA UL, CSA, VDE, IEC, LR, CE UL, CSA, TUV, CE, IEC UL, CSA, TUV, CE, VDE available 16 ECbodyREADERS.indd 16 7/14/06 11:23:10 PM Relays - General Purpose NEW! G7Z General Attributes Dimensions mm (in) 84 H x 62 L x 45 W (3.31 x 2.44 x 1.77) MGN MJN Short Base: 55.88 H x 63.50 L x 63.50 W (2.20 x 2.50 x 2.50) Long Base: 60.45 H x 84.33 L x 63.50 W (2.38 x 3.32 x 2.50) 48.38 H x 35.56 L x 38.73 W (1.91 x 1.40 x 1.53) 30A max. 10A, 20A, 30A (UL ratings) • Each pole able to switch and carry 40A in parallel • Capable of switching up to 160A • Reduced power consumption & size • Low noise • Safety function included as standard • Optional auxiliary contact block enables concurrent signal (1mA) switching • 30 Amp heavy duty power relay • Class F coil insulation system for 155°C (total temperature) • Coil molded in DuPont Rynite® for environmental protection • Rugged construction rivets terminals to base • Magnetic blow-out option • Rugged power driver offers superior 3/16” through-air & 3/8” over-surface spacing • Interlocked frame & contact block prevent contact misalignment during plug-in • Indicator lamp, push-to-operate options • 10A-30A in same package • Continous duty at 125% coil voltage 4A, 3A/1B, 2A/2B 1 Form A, 1Form B, 1Form C, 2 Form A, 2 Form C (long base) 1 Form C, 2 Form C, 3 Form C (monostable); 1 Form C, 2 Form C (latching/unlatching) Bifurcated Crossbar Single button Single button AgSnIn 5/16” diameter AgCdO2 3/16” diameter AgCdO2 100,000: 5A @ 110VDC (at 1,2000 ops/hr) 80,000: 40A @ 440VAC 100,000 min. 30A @ 28VDC/240VAC 100,000 min. 10A @ 28VDC/240VAC 20A @ 28VDC/277VAC 30A @ 28VDC Max. Switching Capacity (resistive load) 17,600VA, 550W 440VA, 110W (auxiliary contact block) N/A N/A Minimum permissible load (@1800 ops./hr.) 2A @ 24VDC <1mA @ 5VDC (auxiliary contact block) N/A N/A 12, 24VDC 6, 12, 24, 120, 240, 480VAC; 6, 12, 24, 48, 110VDC 6, 12, 24, 120VAC 5, 6, 12, 24, 48, 110VDC 3.7W 9.5VA nominal; 2W nominal AC 1.7VA (1, 2PDT) 2.0VA (3PDT DC 1.2W Class B Class F Class A Characteristics Operating temperature -25ºC to +60ºC At 30Amps: -45ºC to +80°C (AC coil) -45ºC to +115°C (DC coil) -45ºC to +60°C (1 & 2 pole AC coil), + 70°C (DC coil) -45ºC to +45°C (3 pole AC coil) -45ºC to +70°C (3 pole DC coil) Impulse withstand voltage (1.2 x 50µ sec. unless noted) 10kV (coil to contacts or different polarity) 4.5kV (open contacts) N/A N/A 4,000VAC (coil-contacts) 4,000VAC (different polarity) 2,000VAC (open contacts) 2,200Vrms, 60Hz between contacts; 2,200Vrms, 60Hz between other elements 750VAC, rms 60Hz across open contacts; 2,500VAC, rms 60Hz all other mutually insulated elements Screw Screw Quick-connect plug-in Unsealed, fully sealed None Semi-sealed Auxiliary Contact Block (2 poles of 4 poles) Signal level switching capability (2 poles of 4 poles) Aluminum dust cover - sealed knock-out holes for standard conduit fittings. Relay mounts on pre-drilled base. Snap action cover release 127 W x 76.20 H x 101.60 D (5 x 3 x 4) PTF11PC Socket; PTF11QDC Socket; PTF21PC Socket; PTFPCB Socket; PYMJN-PCB Retaining Clips; PYMJN-S Retaining Clips UL, CSA, TUV, VDE UL UL, CSA Switching 40A max. (160A max. in parallel) Features Contact Information Contact form Contact material(s) Electrical service life (@ 1800 ops./hr.) (resistive load) Coil Information Coil voltage Power consumption Insulation class Dielectric strength (50/60 Hz for 1 minute) Terminal choices Protection level Accessories Approved standards Relays - General Purpose Contact type(s) (see: Electrical service life) 17 ECbodyREADERS.indd 17 7/14/06 11:23:25 PM Relays - Solid State SIP G3MB General Attributes Dimensions mm (in) G3MC DIP G3R I/O G3DZ 13.5 H x 24.5 L x 4.5 W (0.53 x 0.96 x 0.18) Input & Output modules: 28 H x 29 L x 13 W (1.10 x 1.14 x 0.51) 12.5 max. H x 18.5 L x 6.5 W (0.49 x 0.73 x 0.26) max. 2A @ 240VAC Input module: 100mA; Output module: 2A 0.6A @ 240VAC • Space saving SIP design • Industry standard footprint • Monoblock construction results in ultimate reliability •Reduced height thin profile SIP • Ideal for close PCB mounting • Monoblock construction results in ultimate reliability • Industry standard footprint • 4 kV insulation • Operation indicator standard • Interchangeable with G2R electromechanical relay • Ideal for DIN rail mount I/O operations • AC/DC & AC half-wave switching with one model • 10µA max. leakage current • Matches G6D form factor -30ºC to +80°C -30ºC to +80°C -30ºC to +80°C -30ºC to +85°C 5, 12, 24VDC 5, 12, 24VDC Input module: 5VDC; 6.6-32VDC; 60-264VAC; Output module: 4-32VDC 5, 12, 24VDC 75-264VAC 75-264VAC Input module: 4-32VDC; Output module: 75-264VAC, 4-200VDC 5, 12, 24VDC 1.5mA (at 200VAC) 1.5mA (at 200VAC) Input Module: 5µA Output Module: 1.5mA (AC) 1mA (DC) 10µA (at 125VDC) Isolation Phototriac Phototriac Photocoupler, Phototriac Phototriac Dielectric strength (50/60Hz for 1 min.) 2,500VAC 2,500VAC 4,000VAC 2,500VAC Zero crossing Optional Yes Input module: No; Output module: Yes No Snubber circuit Optional Yes Input module: No; Output module Yes (Built-in Varistor) 100,000 hours 100,000 hours 100,000 hours 100,000 hours Mounting PCB PCB Socket PCB or Socket Terminal PCB PCB Plug-in PCB 20.5 H x 24.5 L x 5.5 W (0.81 x 0.96 x 0.22) Switching 2A @ 240VAC current (resistive) Features Operating temperature Operating input Relays - Solid State DIP SIP Output voltage Leakage Current (max.) Life (MTTF) Approvals UL, CSA, TUV UL, CSA, VDE UL, CSA, TUV UL, CSA Equivalent Omron EMR footprint G2RV similar for terminal block G2RV similar for terminal block G2R G6D, G6DS Optional heat sink N/A N/A N/A N/A Socket N/A N/A P2RF-05E P6D-04P 18 ECbodyREADERS.indd 18 7/14/06 11:23:32 PM Relays - Solid State SIP G3S/G3SD General Attributes Dimensions mm (in) SIP SIP G3CN SIP G3M G3TB 20 H x 40 L x 9 W (0.79 x 1.58 x 0.35) Input module: 20.5 H x 43.5 L x 10 W (0.81 x 1.70 x 0.39) Output module: 30.5 H x 43.5 L x 10 W (1.20 x 1.70 x 0.39) 2A, 3A, @ 53VDC, 26VAC 2, 3A, 5A @ 250VAC Input module: 25mA @ 4 to 32VDC Output module: 3mA max. @ 5 to 48VDC 3mA max. @ 100 to 240 VAC 1.5 max. @ 48 to 200 VDC • AC and DC models available • Socketable • Heatsink, available • Interchanges with G6B SPST electrical mechanical relay • Flat & vertical packages • Ideal for FA & OA equipment • Multi-input SSR • Space-saving SIP design • Ideal for high density Power PCB applications • High current switching capability • Color-coded input & output modules • Industry standard footprint • 4kV dielectric strength • LED indicator -30°C to +80°C -30°C to +80°C -30°C to +80°C -30°C to +85°C Operating input 5, 12, 24VDC 5, 12, 24; 3~28VDC 5, 12, 24VDC Input module: 80-264VAC, 3-32VDC; Output module: 3-32VDC Output voltage 5, 12. 24VDC 75~264VAC 3~53VDC 75-264VAC Input module: 4-32VDC; Output module: 75-264VAC, 4-200VDC 2mA (G3S) 0.1mA @ 26VDC (G3S) 2.5/5mA Input module: 100µA max. 2mA @ 100VAC/5mA @ 200VAC (2Amp versions) Output module: 5mA @ 200VAC (AC) 1.5mA @ 200VAC (3 & 5 Amp versions) 1mA max. (DC) Phototriac (G3S) Photocoupler (G3SD) Phototriac Photocoupler Phototriac Photocoupler 2,500VAC 2,500VAC 2,000VAC (2A versions) 2,500VAC (3A and 5A versions) 4,000VAC No Optional Optional Input module: No; Output module: Yes Yes (Built-in Varistor) No Yes Input module: No; Output module: Yes Life (MTTF) 100,000 hours 100,000 hours 100,000 hours 100,000 hours Mounting PCB or Socket PCB PCB PCB PCB PCB PCB PCB UL, CSA UL (114), CSA (22.2) UL, CSA, TUV UL, CSA Equivalent Omron EMR footprint G6B N/A N/A N/A Optional heat sink Y92B-S08N N/A N/A N/A P6B-04P (PCB) N/A N/A N/A Switching 1A @ 240VAC current (resistive) (1.2A, G3S-PD & heatsink) (max.) (1.1A, G3SD-PD & heatsink) Features Operating temperature Leakage Current (max.) Isolation Dielectric strength (50/60Hz for 1 min.) Zero crossing Snubber circuit Terminal Approvals Socket Relays - Solid State 26H x 33H x 14 W (1.04 x 1.30 x .55) max. 16.5 H x 20 L x 10 W (0.65 x 0.79 x 0.39) 19 ECbodyREADERS.indd 19 7/14/06 11:23:38 PM Relays - Solid State SIP Quick Connect G3TC General Attributes Dimensions mm (in) G3NE G3NA G3PA/B 11.5 H x 47 L x 37.5 W (0.45 x 1.90 x 1.50) 27 H x 58 L x 43 W (1.06 x 2.28 x 1.69) Consult Omron 20A max.@ 240VAC (264VAC max.) Versions range from 10A to 90A max. (when using heat sink) up to 45A • Color-coded modules • Industry standard footprint • Built-in anchor screw • Optical isolation – Dielectric 4kV • Zero cross on AC output modules • High capacity • Panel Mount • Quick-connect terminals • Ideal for industrial controls & commercial cooking • "Hockey Puck" standard • Operation indicator standard • Built-in heat sink increases life and reliability • Voltage turn-on at zero crossing reduces initial inrush load currents • LED indicator when control power applied -30ºC to +80°C -30ºC to +80°C -30ºC to +80°C -30ºC to +80°C Input Module: 5, 12, 24VDC 90-140VDC/AC, 180-280 VDC/AC, 10-32VDC/AC Output Module: 5, 15, 24VDC 4-32VDC; 75-264VAC 12-24VDC Input Module: 4.5-6VDC, 12-18VDC, 20-30VDC Output Module: 75-140 VAC, 75-280VAC, 5-60 VDC, 5-200VDC 75-264VAC 19 - 264VAC 180 - 528VAC 4 - 220VDC (10A model) 400 - 600VAC (10, 25, 50A models) 75 - 264VAC 180 - 528VAC 2mA (at 100VAC) 5mA (at 200VAC) 5mA @ 100VAC 10mA @ 200VAC 20mA @ 400VAC 10mA @ 200VAC 20mA @ 400VAC AC Input, DC Input, DC Output: Photocoupler AC Output: Phototriac Phototriac Phototriac, Photocoupler Phototriac 4,000VAC 2,000VAC 2,500VAC 4000VAC (75 and 90A models) G3PA: 4,000VAC G3PB: 2,500VAC Zero crossing Yes (AC output modules only) Optional Yes Yes Snubber circuit Yes (AC output modules only) Yes (built in varistor) Yes Yes Life (MTTF) 100,000 hours 100,000 hours 100,000 hours 100,000 hours PCB with anchor screw Plug-in Panel Panel, DIN PCB Quick connect Screw Screw UL, CSA, TUV, CE UL, CSA, TUV UL, CSA, TUV UL, CSA, TUV, VDE Equivalent Omron EMR footprint N/A N/A N/A N/A Optional heat sink N/A Y92B-N50, -N100 Y92B-A Socket N/A Mounting plate Mounting plate 31.8 H x 43.2 L x 15.2 W (1.25 x 1.7 x 0.6) Switching Input Module: current (resistive) 12mA, 15mA, or 18mA (max.) (depending on model) Output Module: 3A (1A on DC output models rated< 200VDC) Features Relays - Solid State Quick Connect Operating temperature Operating input Output voltage Leakage Current (max.) Isolation Dielectric strength (50/60Hz for 1 min.) Mounting Terminal Approvals Input Module: 100µA AC Output Modules: 5mA @ 240VAC 2.5mA @ 120VAC DC Output Modules: 1mA , -B , -P N/A PFP-xxx 20 ECbodyREADERS.indd 20 7/14/06 11:23:44 PM Sockets Back Connecting Sockets Track Mount Sockets Relay Type Solder terminals PCB terminals P2RF-05 P2RF-05-E P2RF-05-S P2R-05A P2R-05P G2R-2-S P2RF-08 P2RF-08-E P2RF-08-S P2R-08A P2R-08P G2RV G2RL-SL500, -SL700 – – G6B – – P6B-04P (1-pole), P6B-26P (2-pole) G6D – – P6D-04P G6BK – – P6B-06P G6BU – – P6B-04P G6C-1, G6C-2 – – P6C-06P G6CK – – P6C-08P G6CU – – P6C-06P LY1, LY2 PTF08A-E PT08 PT08-0 LY3 PTF11A PT11 PT11-0 LY4 PTF14A-E PT14 PT14-0 MK2 PFO83A-E PL08 PLE08-0 MK3 PF113A-E PL11 PLE11-0 MY2 PYF08A-E PYF08A-N PYF08-S PY08 PY08-02 MY3 PYF11A PY11 PY11-02 MY4 PYF14A-E PYF14A-N PYF14S PY14 PY14-02 MY2K PYF14A-E PY14 PY14-02 PYF14A-E – – MY4(Z)H NOTES: Sockets G2R-1-S 1. -E and -N models are finger-protect construction. Round terminals cannot be used. Use Y-shaped terminals. 2. -S types are screwless terminal styles. Relay Type Adaptor Mounting Bracket Front Connecting Socket Track Mount/Panel Mount Track Mount/Panel Mount G7J-(ALL) R99-04-FOR-G5F W bracket – – G7L-1A-T R99-07G5D E bracket P7LF-D P7LF-06 G7L-1A-TJ P7LF-06 G7L-1A-B – G7L-1A-BJ – G7L-2A-T P7LF-06 G7L-2A-TJ P7LF-06 G7L-2A-B – G7L-2A-BJ – Terminal Cover P&LE-C Socket Bridge PYDM Mounting Track Length PFP-100N 1 meter PFP-50N .5 meter 21 ECbodyREADERS.indd 21 7/14/06 11:24:03 PM Electronic Components Omron Electronic Components: The Quality, Flexibility and Global Support You Need Master Selection Guide For More Detailed Information… Visit Us Online: www.components.omron.com • Browse Omron’s full range of Product information and selection guides. • Download PDF’s — datasheets, brochures, and more. • Find Omron solutions for competitive products. • Locate a Distributor and search for available inventory. Call Us: 1-847-882-2288 Monday through Friday, 7:30 a.m. to 6:00 p.m. Central Time (CT) Relays Switches Photomicrosensors Micro Sensors Connectors Email Us: [email protected] OMRON ELECTRONICS COMPONENTS LLC 55 Commerce Drive • Schaumburg, IL 60173 IT IS THE BUYER’S SOLE RESPONSIBILITY TO ENSURE THAT ANY OMRON PRODUCT IS FIT AND SUFFICIENT FOR USE IN A MOTORIZED VEHICLE APPLICATION. BUYER SHALL BE SOLELY RESPONSIBLE FOR DETERMINING APPROPRIATENESS OF THE PARTICULAR PRODUCT WITH RESPECT TO THE BUYER’S APPLICATION, END PRODUCT, OR SYSTEM. BUYER SHALL TAKE THE APPLICATION RESPONSIBILITY IN ALL CASES, BUT THE FOLLOWING IS A NON-EXHAUSTIVE LIST OF APPLICATIONS FOR WHICH PARTICULAR ATTENTION MUST BE GIVEN: (i) Outdoor use; uses involving potential chemical contamination or electrical interference, or conditions or uses not described in this document. (ii) Use in consumer products or any use in significant quantities. (iii) Energy control systems, combustion systems, railroad systems, aviation systems, medical equipment, amusement machines, vehicles, safety equipment, and installations subject to separate industry or government regulations. (iv) Systems, machines, and equipment that could present a risk to life or property. NEVER USE THE PRODUCT FOR AN APPLICATION INVOLVING SERIOUS RISK TO LIFE OR PROPERTY OR IN LARGE QUANTITIES WITHOUT ENSURING THAT THE END PRODUCT AS A WHOLE HAS BEEN DESIGNED TO ADDRESS RELEVANT RISKS, AND THAT THE OMRON PRODUCT IS PROPERLY RATED AND INSTALLED FOR ITS INTENDED USE. YOI-E-03 © 2006 Omron Electronic Componenets Printed in the U.S.A. 06/2006 REQUIRED PRECAUTIONS www.components.omron.com USAcovers.indd 2-3 7/14/06 2:42:48 PM Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Omron: G3CN-202P1-DC3-28 G3CN-203P1-US DC3-28 PY11 G3CN-DX02P-DC3-28 G3CN-DX03P-DC3-28 P2R-P PY11-02 G3CN-DX03P1 DC3-28 P2RM-SR