SAMSUNG CL05B104KP5NNWC

SPECIFICATION
 Supplier : Samsung electro-mechanics
 Samsung P/N : CL05B104KP5NNWC
 Product : Multi-layer Ceramic Capacitor
 Description :
CAP, 100㎋, 10V, ±10%, X7R, 0402
A. Samsung Part Number
① Series
CL
05
B
104
K
P
5
N
N
W
C
①
②
③
④
⑤
⑥
⑦
⑧
⑨
⑩
⑪
Samsung Multi-layer Ceramic Capacitor
② Size
0402 (inch code)
③ Dielectric
X7R
④ Capacitance
⑤ Capacitance
L: 1.0 ± 0.05
0.5 ± 0.05 mm
W:
⑧ Inner electrode
Ni
Termination
Cu
Plating
Sn 100%
100 ㎋
±10 %
tolerance
mm
⑨ Product
Normal
(Pb Free)
⑥ Rated Voltage
10 V
⑩ Special
Product for Network application
⑦ Thickness
0.5 ± 0.05 mm
⑪ Packaging
Cardboard Type, 7" reel
B. Samsung Reliability Test and Judgement condition
Performance
1.0±0.2Vrms
Rated Voltage
60~120 sec.
Resistance
10,000Mohm or 100Mohm㎌
Whichever is Smaller
Appearance
No abnormal exterior appearance
Withstanding
No dielectric breakdown or
Microscope (10)
250% of the rated voltage
Voltage
mechanical breakdown
Temperature
X7R
Characterisitcs
Adhesive Strength
(From -55℃ to 125℃, Capacitance change shoud be within ±15%)
No peeling shall be occur on the
500gF, for 10±1 sec.
of Termination
terminal electrode
Bending Strength
Capacitance change :
Tan δ (DF)
Insulation
Within specified tolerance
Test condition
1㎑±10%
Capacitance
0.05 max.
within ±12.5%
Bending to the limit (1mm)
with 1.0mm/sec.
Solderability
More than 75% of terminal surface
SnAg3.0Cu0.5 solder
is to be soldered newly
245±5℃, 3±0.3sec.
(preheating : 80~120℃ for 10~30sec.)
Resistance to
Capacitance change :
Soldering heat
Tan δ, IR : initial spec.
within ±7.5%
Solder pot : 270±5℃, 10±1sec.
Performance
Vibration Test
Capacitance change :
within ±5%
Test condition
Amplitude : 1.5mm
Tan δ, IR : initial spec.
From 10㎐ to 55㎐ (return : 1min.)
Moisture
Capacitance change :
2hours  3 direction (x, y, z)
With rated voltage
Resistance
Tan δ : 0.075 max
IR :
40±2℃, 90~95%RH, 500+12/-0hrs
500Mohm or 25Mohm  ㎌
Whichever is Smaller
High Temperature
Capacitance change :
Resistance
Tan δ : 0.075 max
IR :
within ±12.5%
within ±12.5%
Capacitance change :
Cycling
Tan δ, IR : initial spec.
of the rated voltage
Max. operating temperature
1000Mohm or 50Mohm  ㎌
Whichever is Smaller
Temperature
With 200%
within ±7.5%
1000+48/-0hrs
1 cycle condition
Min. operating temperature
25℃
→
25℃
→
Max. operating temperature →
5 cycle test
C. Recommended Soldering method :
Reflow ( Reflow Peak Temperature : 260+0/-5℃, 10sec. Max )
* For the more detail Specification, Please refer to the Samsung MLCC catalogue.