SAMSUNG CL10A106MP8NNNC

SPECIFICATION
 Supplier : Samsung electro-mechanics
 Samsung P/N : CL10A106MP8NNNC
 Product : Multi-layer Ceramic Capacitor
 Description :
CAP, 10㎌, 10V, ±20%, X5R, 0603
A. Samsung Part Number
① Series
CL
10
A
106
M
P
8
N
N
N
C
①
②
③
④
⑤
⑥
⑦
⑧
⑨
⑩
⑪
Samsung Multi-layer Ceramic Capacitor
② Size
0603 (inch code)
③ Dielectric
X5R
④ Capacitance
⑤ Capacitance
L: 1.6 ± 0.1
⑥ Rated Voltage
10 V
⑦ Thickness
0.8 ± 0.1
mm
0.8 ± 0.1
W:
⑧ Inner electrode
Ni
Termination
Cu
Plating
Sn 100%
10 ㎌
±20 %
tolerance
mm
mm
(Pb Free)
⑨ Product
Normal
⑩ Special
Reserved for future use
⑪ Packaging
Cardboard Type, 7" reel
B. Samsung Reliablility Test and Judgement condition
Performance
Capacitance
Tan δ (DF)
Insulation
Within specified tolerance
Test condition
1㎑±10%
0.5±0.1Vrms
60~120 sec.
0.1 max.
10,000Mohm or 100Mohm㎌
Whichever is Smaller
Rated Voltage
Resistance
Appearance
No abnormal exterior appearance
Withstanding
No dielectric breakdown or
Microscope (10)
250% of the rated voltage
Voltage
mechanical breakdown
Temperature
X5R
Characterisitcs
Adhesive Strength
(From -55℃ to 85℃, Capacitance change shoud be within ±15%)
No peeling shall be occur on the
500gF, for 10±1 sec.
of Termination
terminal electrode
Bending Strength
Capacitance change :
within ±12.5%
Bending to the limit (1mm)
with 1.0mm/sec.
Solderability
More than 75% of terminal surface
SnAg3.0Cu0.5 solder
is to be soldered newly
245±5℃, 3±0.3sec.
(preheating : 80~120℃ for 10~30sec.)
Resistance to
Capacitance change :
Soldering heat
Tan δ, IR : initial spec.
within ±7.5%
Solder pot : 270±5℃, 10±1sec.
Performance
Vibration Test
Capacitance change :
within ±5%
Test condition
Amplitude : 1.5mm
Tan δ, IR : initial spec.
From 10㎐ to 55㎐ (return : 1min.)
Moisture
Capacitance change :
2hours  3 direction (x, y, z)
With rated voltage
Resistance
Tan δ : 0.125 max
IR :
40±2℃, 90~95%RH, 500+12/-0hrs
12.5㏁·㎌ or Over
High Temperature
Capacitance change :
Resistance
Tan δ : 0.125 max
IR :
within ±12.5%
within ±12.5%
With 100%
of the rated voltage
Max. operating temperature
25㏁·㎌ or Over
1000+48/-0hrs
Temperature
Capacitance change :
Cycling
Tan δ, IR : initial spec.
within ±7.5%
1 cycle condition
Min. operating temperature
25℃
→
25℃
→
Max. operating temperature →
5 cycle test
C. Recommended Soldering method :
Reflow ( Reflow Peak Temperature : 260+0/-5℃, 10sec. Max )
* For the more detail Specification, Please refer to the Samsung MLCC catalogue.