STMICROELECTRONICS STEVAL

STEVAL-MKI116V1
MEMS microphone demonstration board based on the
MP34DB01 and STM32
Data brief
Features
■
Powered and connected to PC through USB
■
Sound card automatically recognized by the
PC as an audio device
■
The onboard microphones are digital MEMS
devices
■
MEMS microphones provide a high frequency
data stream (1 to 3.25 MHz) of 1-bit digital
samples (PDM technique)
■
Audio collected from the microphones is sent to
the PC through the USB
■
LED status indicator
■
RoHS compliant
Description
The purpose of the STEVAL-MKI116V1
demonstration board is to provide an example of
the decoding and streaming of digital MEMS
microphone outputs.
The STEVAL-MKI116V1 demonstration board
hosts the MP34DB01 (bottom-port digital
microphone), working as a sensor, and the
STM32F107RC microcontroller, working as an
audio decoder.
These microphones are analog-to-digital
transducers. They are able to sense sound
pressure and convert this signal into a digital
signal using the PDM technique.
The STM32 microcontroller decodes the PDM
signal coming from the microphones and streams
the audio via the USB.
The STEVAL-MKI116V1 demonstration board is a
sound card automatically recognized by the PC
as an audio device. Connection is made through a
USB cable which also supplies the board and
then streams the collected audio.
March 2012
Doc ID 022999 Rev 1
For further information contact your local STMicroelectronics sales office.
1/5
www.st.com
5
2/5
Doc ID 022999 Rev 1
&
Q)
,2 86%/&
,2
,2 9%86 8
*1'
,2
(
&
4
5 5
N
5 (
5
.
4
86%'3
5
5
51&
86%'0
'
/('
&
Q)
9&&B86%
'
/('
5
%($'
/
,1'8&725
&
X)
5
.
&
Q)
-3
-3
287
287
Q)
.
5
-706
&
/0/0
$'-
287
287
,1
8
5
.
287
/'6;;
9,1+
9,1
8
0LQL7\SH%
' ,' *1' %
%
&
670B,6B%,&.
5
.
9%86 ' 5
N
8&B9''
670B,6B/5&.
5
.
9
&
X)
9
&
X)
-
8&B9''
%($'
%($'
/
,1'8&725
$B9''
0,&B9''
/
,1'8&725
8&B9''
-
;B+($'(5
-803(5B3
-
.
5
5
N
9&&B86%
*1'
9&&B86%
8&B9''
5
.
8&B9''
%<3$66
86%B',6&
3RZHU6XSSO\
-567
1567
-7&.
-7$*
Figure 1.
1
Schematics
STEVAL-MKI116V1
Schematics
Schematic diagram (1 of 2)
$0Y
Doc ID 022999 Rev 1
/
%($'
&
X)
/
Q+
/('
&
Q)
&
Q)
1567
/('
3'B26&B287
8
3%
3&
3%
3&
3%
3'
3%
3%
3%
3%
3&
3&
3%
3$
3%
3$
%227
3$
3%
3$
9''B
966B
3$
73
B&.
0,&B'$7$
63,B&ORFN
-3
-3
966B
670B/4)3
86%B',6&
73
73
670B,6B'$7$
&
Q)
5
5
966B&$3
670B,6B/5&.
8&B9''
670B,6B%,&.
670B,6B0&/.
73
966B&$3
0&2
86%'0
86%'3
&
X)
-706
5
5
&
Q)
8&B9''
&
X)
-7&.
0&2
-567
6&/
6'$
670B,6B/5&.
670B,6B%,&.
670B,6B'$7$
&
X)
3%
3%
3%
3%
3&
3&
3&
3&
3$
3$
3$
3$
3$
3$
966B
9''B
9''B
&
X)
3$
3$
3$:.83
9''$
966$
3&
3&
3&
3&
1567
&
X)
0DQJXVWDRSWLRQ
3$
3&
&
Q)
8&B9''
/('
0,&B&.
/('
)$,/
087(
67%<
5(6(7
3'B26&B,1
3&26&B287
3%
/('
9''B
8&B26&B287
966B
3%
8&B26&B,1
5
.
3&26&B,1
3&7$03(557&
9%$7
5
.
5
N
&
Q)
&
X)
5
N
8&B9'' 8&B9''
8&B9''
&
Q)
8&B9''
8&B9''
'
/('
5
5
51&
5
N
-
0&/.
-3
-3
9
,6B/5&.
,6B%,&.
,6B'$7B
5 5
5 5
5 5
5 5
&
S)
&
S)
670B,6B/5&.
670B,6B%,&.
670B,6B'$7$
670B,6B'$7$
0,&B9''
0,&B'$7$
0,&B&.
-
&21
-
&21
B&.
670B,6B0&/.
&
S)
&
16
-
,6B%,&.
5
5 5
<
0+]
,6B'$7B
&
Q)
8&B26&B287
8&B26&B,1
&
S)
,6B'$7B
-
&21
-
&21
67%<
5(6(7
)$,/
6'$
0,&B'$7$
0,&&.
0,&B'$7$
'$7$
9''
8
'$7$
&/.
*1'
8
0,&/5
0,&B9''
0,&B'$7$
0,&B9''
03'7
9''
/5
&/.
/5
*1'
03'%
0,&B'$7$
0,&B9''
0,&B&.
,6B/5&.
5 &ORFNJHQHUDWRUV
,6B'$7B
087(
6&/
,6B'$7B
0,&B9''
;7B$&7,9(
8
&RQQHFWRUV
B&.
8&B9''
-803(5B3
3$
$B9''
'
/('
5
'
/('
5
/('
8&B9''
0,&/5
-
'$7$
9''
8
5
5
0,&B9''
0,&/5
-
0,&B9''
&/.
'287
9''
0,&&.
03'7
*1'
/5
*1'
8
&/.
'287
9''
03'7
*1'
/5
*1'
8
03'%
&/.
/5
5
5
0LFURSKRQHV
*1'
966B&$3
'$7$
&/.
&
S)
&
S)
5
03'7
9''
/5
5
& S)
&
X)
0,&B9''
&
S)
&
X)
0,&B9''
8
*1'
-803(5B3
0,&&.
0,&&.
0,&B9''
0,&/5
0,&B&.
0,&B'$7$
&
Q)
0,&B&.
0,&B'$7$
&
Q)
Figure 2.
X&RQWUROOHU670
STEVAL-MKI116V1
Schematics
Schematic diagram (2 of 2)
-803(5B3
7$&7
%87
$0Y
3/5
Revision history
2
STEVAL-MKI116V1
Revision history
Table 1.
4/5
Document revision history
Date
Revision
27-Mar-2012
1
Changes
Initial release.
Doc ID 022999 Rev 1
STEVAL-MKI116V1
Please Read Carefully:
Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries (“ST”) reserve the
right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any
time, without notice.
All ST products are sold pursuant to ST’s terms and conditions of sale.
Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no
liability whatsoever relating to the choice, selection or use of the ST products and services described herein.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this
document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products
or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such
third party products or services or any intellectual property contained therein.
UNLESS OTHERWISE SET FORTH IN ST’S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED
WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED
WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS
OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT.
UNLESS EXPRESSLY APPROVED IN WRITING BY TWO AUTHORIZED ST REPRESENTATIVES, ST PRODUCTS ARE NOT
RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING
APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY,
DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS "AUTOMOTIVE
GRADE" MAY ONLY BE USED IN AUTOMOTIVE APPLICATIONS AT USER’S OWN RISK.
Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void
any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any
liability of ST.
ST and the ST logo are trademarks or registered trademarks of ST in various countries.
Information in this document supersedes and replaces all information previously supplied.
The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners.
© 2012 STMicroelectronics - All rights reserved
STMicroelectronics group of companies
Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan Malaysia - Malta - Morocco - Philippines - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America
www.st.com
Doc ID 022999 Rev 1
5/5