Bussmann® Time-Delay Axial Leaded C515 5mm x 15mm Glass Fuses R Dimensional Data 33.5 ± 1.5mm 5.0mm (Typ.) 15.0 ± 0.5mm 0.6mm Dia. (Typ.) Markings: Manufacturer’s Symbol, Product Symbol, Voltage, Ampere, Testing Agency Mark (Optional) Dimensions are in Millimeters (mm) Agency File Numbers: UL Listing: Guide # JDYX, File E75865. CSA Certification: Class 1422-01, File LR65063. UL Recognized: Guide # JDYX2, File E75865. Product Symbol: C515 Physical Fuse Size: 5 x 15mm Limits for Pre-arcing Time/UL Listed Fuses. Amp Ratings 125mA - 7A 135% MAX 60 min. 200% MIN 3 sec. MAX 2 min. Limits for Pre-arcing Time/UL Recognized Fuses. Amp Ratings 350mA 350mA MIN 240 min. 600mA MAX 90 sec. 2A MAX 2 sec. 6A MAX 500 millisec. Mechanical Characteristics: Materials: Endcaps are silver-plated brass; leads are tinplated copper and tube is glass. Optional sleeve is flexible fluoropolymer (UL Flammability rating VW-1). The tube will self extinguish within one minute. 25% maximum flag burn per ASTM Flammability Test ASTM D2671 Procedure C. Lead Pull: Lead Bend: Leads will withstand a seven pound pull applied axially to the lead for five seconds. Leads will be bent 90 degrees in one direction, back to original direction, then 90 degrees in the opposite direction and return to the cycle. Leads will withstand two cycles. The bending is to be done with a two pound weight attached to the end of the lead. Temp. Range: -55°C to +85°C with proper derating. Weight: 1000 = 1.33kg. 5.2 ± 0.3mm 33.5 ± 1.5mm Telecommunication Capabilities: UL 1459: Telephone Equipment Fuses successfully opened: 600 Volts (AC) 40 Amps 600 Volts (AC) 7 Amps 600 Volts (AC) 2.2 Amps UL 497: Protectors for Paired Conductor Communication Circuits Fuses successfully passed without opening: 10 x 1000 microsecond waveform †50 pulses/1 pulse every 8 seconds @ 1000V Fuse Rating Peak Current (A) 250mA 12.5 350mA 19.5 375mA 20.0 500mA 28.5 600mA 36.5 750mA 49.0 1A 66.5 1.25A 100.0 † Fuse resistance was not allowed to vary by more than five percent after completion of the test. Packaging & Ordering Information: C515 Product Symbol Package Code BK/ Bulk Package (100 pcs) TR/ Tape & Reel (500 pcs) TR1/ Tape & Reel (1,000 pcs) TR2/ Tape & Reel (1,500 pcs) NOTE: Tape & Reel Packaging per EIA 296-E (10.2mm Component Pitch and 52.4mm Tape-to-Tape Spacing) Blank - Standard S - Transparent sleeve for sealed fuses. Ampere Rating 125mA 250mA 350mA 375mA 500mA 600mA 750mA 1A 1.25A 1.5A 1.6A 2A 2.25A 2.5A 3A 3.5A 4A 5A 7A CE logo denotes compliance with European Union Low Voltage Directive (50-1000V AC, 75-1500V DC). Refer to BIF document #8002 or contact Bussmann Application Engineering at 314-527-1270 for more information. 12-17-98 SB98107 Rev. A Form No. C515 Page 1 of 2 BIF Doc #2006 Bussmann® Time-Delay Axial Leaded C515 5mm x 15mm Glass Fuses R 100 AMPERE RATING 10 TIME IN SECONDS 10 1 1 CURRENT IN AMPERES 10 100 1 .1 10 .01 .01 100 .1 .1 1 TIME IN SECONDS 3.5A 5A 4A 7A AMPERE RATING Time-Current Characteristic Curves–Average Melt (Full Size Curves Available) .1 100 250mA 350mA 500mA 750mA 1A 1.25A 1.5A 2.5A 3A Time-Current Characteristic Curves–Average Melt (Full Size Curves Available) CURRENT IN AMPERES 375mA 500mA 600mA 750mA 1A 1.25A 1.5A 1.6A 2A 2.25A 2.5A 3A 3.5A 4A 5A 7A 250V 35A/250V AC 10kA/125V AC p.f. = 0.7 - 0.8 100A/250V AC 10ka/125V AC p.f. = 0.7 - 0.8 125V 400A/125V AC p.f. = 1.0 Pre-arcing Value (I2t) (A2s) Typ. 0.039 0.18 0.9 490 410 350 300 250 220 200 200 200 200 190 190 180 150 150 140 0.9 1.1 2.7 2.7 6.4 7.6 13 14 27 31 42 94 94 145 230 540 • • CSA AIR 35A/250V 10kA/125V AC p.f. = 0.7 - 0.8 35A/250V 10kA/125V AC 25A/600V p.f. = 0.7 - 0.8 Voltage Drop (mV) max. 1200 630 520 U.R. Rated Voltage (V)AC Current Rating 125mA 250mA 350mA U.L. Electrical Characteristics: • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • The only controlled copy of this BIF document is the electronic read-only version located on the Bussmann Network Drive. All other copies of this BIF document are by definition uncontrolled. This bulletin is intended to clearly present comprehensive product data and provide technical information that will help the end user with design applications. Bussmann reserves the right, without notice, to change design or construction of any products and to discontinue or limit distribution of any products. Bussmann also reserves the right to change or update, without notice, any technical information contained in this bulletin. Once a product has been selected, it should be tested by the user in all possible applications. 12-17-98 SB98107 Rev. A Form No.C515 Page 2 of 2 BIF Doc #2006