Bussmann® Fast-Acting Axial Leaded C518 5mm x 15mm Glass Fuses Dimensional Data 15.0 ± 0.5mm 5.2 ± 0.3mm 5.0mm (Typ.) 0.6mm Dia. (Typ) Markings: Manufacturer’s Symbol, Product Symbol, Voltage, Ampere, Testing Agency Mark (Optional) Dimensions are in Millimeters (mm) Physical Fuse Size: 5 x 15mm Mechanical Characteristics: Materials: Endcaps are silver-plated brass; leads are tin-plated copper and tube is glass. Optional sleeve is flexible fluoropolymer (UL Flammability rating VW-1). The tube will self extinguish within one minute. 25% maximum flag burn per ASTM Flammability Test ASTM D2671 Procedure C. Leads will withstand a seven pound pull applied axially to the lead for five seconds. Lead Bend: 1.5A 2A 2.5A 3A 3.5A 5A 4A .1 .01 .1 Lead Pull: 1 Leads will be bent 90 degrees in one direction, back to original direction, then 90 degrees in the opposite direction and return to the cycle. Leads will withstand two cycles. The bending is to be done with a two pound weight attached to the end of the lead. CURRENT IN AMPERES 100 C518 10 10 Agency File Numbers: UL Listing. File E75865, Guide # JDYX. CSA Certification. File LR65063 Class 1422-01. Product Symbol: AMPERE RATING 200% MAX 2 sec. 1 110% MIN 4 hr. TIME IN SECONDS 135% MAX 1 hr. Amp Ratings 100mA - 7A 100 250mA 375mA 500mA 750mA Limits for Pre-arcing Time/UL Listed Fuses. 100mA 125mA Time-Current Characteristic Curves–Average Melt (Full Size Curves Available) C518 Axial Leaded Fast-Acting Fuses. CE logo denotes compliance with European Union Low Voltage Directive (50-1000V AC, 75-1500V DC). Refer to BIF document #8002 or contact Bussmann Application Engineering at 314-527-1270 for more information. Temp. Range: -55°C to +85°C with proper derating. Weight: 12-17-98 SB98107 1000 = 1.33kg. Rev. A Form No. C518 Page 1 of 2 BIF Doc #2026 Bussmann® Fast-Acting Axial Leaded C518 5mm x 15mm Glass Fuses Rated Voltage Drop Pre-arcing Voltage (V AC) (mV) max (at 100% Rated Current.) Value (I2t) (A2s) Typ. AIR 100mA 125mA 250mA 35A/250V AC 375mA 10kA/125V AC 500mA p.f. = 0.7 - 0.8 750mA 250V 2A 100A/250V AC 2A 10kA/125V AC 3A p.f. = 0.7 - 0.8 3.5A 4A 200A/250V 10kA/125V AC 5A p.f. =.7 - .8 149 1.56 135 4.75 122 7.5 CSA Current Rating U.L. Electrical Characteristics: • • • • • • • • • • • • • • • • • • • • • • Packaging & Ordering Information: C518 Product Symbol Blank - Standard S - Transparent sleeve for sealed fuses. Package Code BK/ Bulk Package (100 pcs) TR/ Tape & Reel (500 pcs) TR1/ Tape & Reel (1,000 pcs) TR2/ Tape & Reel (1,500 pcs) NOTE: Tape & Reel Packaging per EIA 296-E (10.2mm Component Pitch and 52.4mm Tape-to-Tape Spacing) Ampere Rating 100mA 125mA 250mA 375mA 500mA 750mA 2A 3A 3.5A 4A 5A The only controlled copy of this BIF document is the electronic read-only version located on the Bussmann Network Drive. All other copies of this BIF document are by definition uncontrolled. This bulletin is intended to clearly present comprehensive product data and provide technical information that will help the end user with design applications. Bussmann reserves the right, without notice, to change design or construction of any products and to discontinue or limit distribution of any products. Bussmann also reserves the right to change or update, without notice, any technical information contained in this bulletin. Once a product has been selected, it should be tested by the user in all possible applications. 12-17-98 SB98107 Rev. A Form No. C518 Page 2 of 2 BIF Doc #2026