APT8043BLL
APT8043SLL
800V 20A 0.430W
POWER MOS 7TM
BLL
D3PAK
Power MOS 7TM is a new generation of low loss, high voltage, N-Channel
enhancement mode power MOSFETS. Both conduction and switching
losses are addressed with Power MOS 7TM by significantly lowering RDS(ON)
and Qg. Power MOS 7TM combines lower conduction and switching losses
along with exceptionally fast switching speeds inherent with APT's
patented metal gate structure.
• Lower Input Capacitance
• Lower Miller Capacitance
• Lower Gate Charge, Qg
VDSS
ID
SLL
D
• Increased Power Dissipation
• Easier To Drive
• TO-247 or Surface Mount D3PAK Package
MAXIMUM RATINGS
Symbol
TO-247
G
S
All Ratings: TC = 25°C unless otherwise specified.
Parameter
APT8043
UNIT
800
Volts
Drain-Source Voltage
20
Continuous Drain Current @ TC = 25°C
1
Amps
IDM
Pulsed Drain Current
VGS
Gate-Source Voltage Continuous
±30
Gate-Source Voltage Transient
±40
Total Power Dissipation @ TC = 25°C
400
Watts
Linear Derating Factor
3.2
W/°C
VGSM
PD
TJ,TSTG
80
-55 to 150
Operating and Storage Junction Temperature Range
TL
Lead Temperature: 0.063" from Case for 10 Sec.
IAR
Avalanche Current
1
20
1
Repetitive Avalanche Energy
EAS
Single Pulse Avalanche Energy
°C
300
(Repetitive and Non-Repetitive)
EAR
Volts
Amps
30
4
mJ
1300
STATIC ELECTRICAL CHARACTERISTICS
RDS(on)
IDSS
IGSS
VGS(th)
Drain-Source Breakdown Voltage (VGS = 0V, I D = 250µA)
800
Volts
20
Amps
On State Drain Current
2
(VDS > I D(on) x R DS(on) Max, VGS = 10V)
Drain-Source On-State Resistance
2
(VGS = 10V, 0.5 ID[Cont.])
TYP
MAX
0.43
Zero Gate Voltage Drain Current (VDS = VDSS, VGS = 0V)
100
Zero Gate Voltage Drain Current (VDS = 0.8 VDSS, VGS = 0V, TC = 125°C)
500
Gate-Source Leakage Current (VGS = ±30V, VDS = 0V)
Gate Threshold Voltage (VDS = VGS, ID = 1mA)
UNIT
Ohms
µA
±100
nA
5
Volts
3
CAUTION: These Devices are Sensitive to Electrostatic Discharge. Proper Handling Procedures Should Be Followed.
APT Website - http://www.advancedpower.com
USA
405 S.W. Columbia Street
Bend, Oregon 97702 -1035
Phone: (541) 382-8028
FAX: (541) 388-0364
EUROPE
Chemin de Magret
F-33700 Merignac - France
Phone: (33) 5 57 92 15 15
FAX: (33) 5 56 47 97 61
9-2001
ID(on)
MIN
Rev A
BVDSS
Characteristic / Test Conditions
050-7056
Symbol
DYNAMIC CHARACTERISTICS
Symbol
APT8043 BLL - SLL
Characteristic
MIN
Test Conditions
TYP
Ciss
Input Capacitance
VGS = 0V
2480
Coss
Output Capacitance
VDS = 25V
475
Crss
Reverse Transfer Capacitance
f = 1 MHz
68
Qg
Total Gate Charge
VGS = 10V
85
Q gs
Gate-Source Charge
3
Q gd
Gate-Drain ("Miller ") Charge
td(on)
Turn-on Delay Time
tr
VDD = 0.5 VDSS
12.4
ID = ID[Cont.] @ 25°C
53
VGS = 15V
9.1
VDD = 0.5 VDSS
5.7
ID = ID[Cont.] @ 25°C
27.2
RG = 0.6W
5.7
Rise Time
td(off)
Turn-off Delay Time
tf
Fall Time
MAX
UNIT
pF
nC
ns
SOURCE-DRAIN DIODE RATINGS AND CHARACTERISTICS
Symbol
IS
MIN
Characteristic / Test Conditions
TYP
20
Continuous Source Current (Body Diode)
ISM
Pulsed Source Current
1
V SD
Diode Forward Voltage
2
MAX
(Body Diode)
80
(VGS = 0V, IS = -ID[Cont.])
1.3
UNIT
Amps
Volts
t rr
Reverse Recovery Time (IS = -ID[Cont.], dl S/dt = 100A/µs)
685
ns
Q
Reverse Recovery Charge (IS = -ID[Cont.], dl S/dt = 100A/µs)
10.6
µC
dv /
rr
Peak Diode Recovery
dt
dv/
dt
5
10
V/ns
MAX
UNIT
THERMAL CHARACTERISTICS
Symbol
Characteristic
RqJC
Junction to Case
RqJA
Junction to Ambient
MIN
TYP
0.31
40
1 Repetitive Rating: Pulse width limited by maximum junction
temperature.
2 Pulse Test: Pulse width < 380 µs, Duty Cycle < 2%
°C/W
3 See MIL-STD-750 Method 3471
4 Starting T = +25°C, L = 6.5mH, R = 25W, Peak I = 20A
j
G
L
5 dv/ numbers reflect the limitations of the test circuit rather than the
dt
device itself. IS £ -ID Cont. di/dt £ 700A/µs VR £ VDSS TJ £ 150°C
[
]
APT Reserves the right to change, without notice, the specifications and information contained herein.
3
TO-247 Package Outline
15.49 (.610)
16.26 (.640)
6.15 (.242) BSC
Drain
Drain
(Heat Sink)
4.69 (.185)
5.31 (.209)
1.49 (.059)
2.49 (.098)
D PAK Package Outline
5.38 (.212)
6.20 (.244)
4.98 (.196)
5.08 (.200)
1.47 (.058)
1.57 (.062)
15.95 (.628)
16.05 (.632)
Revised
4/18/95
20.80 (.819)
21.46 (.845)
1.04 (.041)
1.15 (.045)
13.79 (.543)
13.99 (.551)
13.41 (.528)
13.51 (.532)
Revised
8/29/97
11.51 (.453)
11.61 (.457)
3.50 (.138)
3.81 (.150)
0.46 (.018)
0.56 (.022) {3 Plcs}
050-7056
Rev A
9-2001
4.50 (.177) Max.
0.40 (.016)
0.79 (.031)
1.65 (.065)
2.13 (.084)
19.81 (.780)
20.32 (.800)
1.01 (.040)
1.40 (.055)
2.21 (.087)
2.59 (.102)
0.020 (.001)
0.178 (.007)
2.67 (.105)
2.84 (.112)
2.87 (.113)
3.12 (.123)
1.27 (.050)
1.40 (.055)
1.22 (.048)
1.32 (.052)
5.45 (.215) BSC
{2 Plcs.}
Gate
Drain
Source
Source
Drain
Gate
Dimensions in Millimeters (Inches)
5.45 (.215) BSC
2-Plcs.
Dimensions in Millimeters and (Inches)
APT's devices are covered by one or more of the following U.S.patents:
1.98 (.078)
2.08 (.082)
4,895,810
5,256,583
5,045,903
4,748,103
5,089,434
5,283,202
5,182,234
5,231,474
5,019,522
5,434,095
5,262,336
5,528,058
3.81 (.150)
4.06 (.160)
(Base of Lead)
Heat Sink (Drain)
and Leads
are Plated