5706 Data Sheet 29306.1C 5706 QUAD PERIPHERAL/POWER DRIVER QUAD 2-INPUT PERIPHERAL/POWER DRIVER —TRANSIENT-PROTECTED OUTPUTS This 16-lead quad 2-input peripheral/power driver is a bipolar monolithic integrated circuit containing logic gates, high-current switching transistors, and transient-suppression diodes on the same chip. The four output transistors are capable of simultaneously sinking 300 mA continuously at ambient temperatures of up to +70°C. In the OFF state, this driver will withstand at least 80 V. T C U Y D L O N R O P E D C E N U E N ER I T N EF O R C R S I O D F — The UDQ5706A quad driver is ideally suited for interface between low-level or high-level logic and high-current/high-voltage loads. Typical applications include driving peripheral loads such as incandescent lamps, light-emitting diodes, memories, and heaters. The integral transient-suppression diodes allow its use with inductive loads such as relays, solenoids, or stepping motors without the need of discrete diodes. This device is furnished in a 16-pin DIP package with a copper leadframe for improved thermal characteristics. Dwg. No. A-9866 ABSOLUTE MAXIMUM RATINGS at TA = +25°C FEATURES ■ DTL/TTL/PMOS/CMOS Compatible Inputs ■ Low Input Current ■ 300 mA Continuous Output Current ■ Standoff Voltage of 80 V Supply Voltage, VCC ............................. 7.0 V Input Voltage, VIN ................................... 30 V Output Off-State Voltage, VOFF ................................................ 80 V Output On-State Sink Current, ION ............................................. 600 mA Suppression Diode Off-StateVoltage, VOFF ................................................ 80 V Suppression Diode On-State Current, ION ............................................. 600 mA Power Dissipation, PD ........................ 2.0 W* Each Driver ................................... 0.8 W Operating Free-Air Temperature Range, TA .................................. -40°C to +85°C Storage Temperature Range, TS ................................ -55°C to +150°C *Derate at the rate of 16.7 mW/°C above TA = +25°C Always order by complete part number, e.g., UDQ5706A . 5706 QUAD PERIPHERAL/POWER DRIVER RECOMMENDED OPERATING CONDITIONS Min. Nom. Max. Units 4. 75 5.0 5.25 V Operating Temperature Range -40 +25 +85 °C Current into any output (ON state) — — 300 mA Supply Voltage (VCC) Dwg. No. A-7628C Dwg. No. A-7878A INPUT TEST PULSE CHARACTERISTICS VIN(0) = 0 V tf = 7 ns VIN(1) = 3.5 V tr = 14 ns tp = 1µs PRR = 500 kHz 115 115 Northeast Northeast Cutoff, Cutoff, Box Box 15036 15036 Worcester, Massachusetts Worcester, Massachusetts 01615-0036 01615-0036 (508) (508) 853-5000 853-5000 Copyright © 1995, 1996 Allegro MicroSystems, Inc. 5706 QUAD PERIPHERAL/POWER DRIVER ELECTRICAL CHARACTERISTICS over operating temperature range (unless otherwise noted). Test Conditions Characteristic “1” Output Reverse Current “0” Output Voltage Limits Symbol Temp. VCC Driven Input Other Input Output Min. Typ. lOFF — MIN 2.0 V 2.0 V 80 V — — 100 µA — — OPEN 2.0 V 2.0 V 80 V — — 100 µA — — MIN 0.8 V VCC 150 mA — 0.35 0.5 V — — MIN 0.8 V VCC 300 mA — 0.5 0.7 V — VON Max. Units Notes “1” Input Voltage VIN(1) — MIN — — — 2.0 — — V — “0” Input Voltage VIN(0) — MIN — — — — — 0.8 V — “0” Input Current IIN(0) — MAX 0.4 V 30 V — — -50 -100 µA 2 “1” Input Current IIN(1) — MAX 30 V 0V — — — 10 µA 2 Input Clamp Voltage VLK — MIN -12 mA — — — — -1.5 V — Diode Leakage Current IR NOM NOM 0V 0V OPEN — — 200 µA 3 Diode Forward Voltage Drop VF NOM NOM VCC VCC — — 1.5 1.75 V 4 “1” Level Supply Current lCC(1) NOM MAX 5.0 V 5.0 V — — 16 24 mA 5 “0” Level Supply Current lCC(0) NOM MAX 0V 0V — — 70 98 mA 5 SWITCHING CHARACTERISTICS at VCC = 5.0 V, TA = 25°C Limits Characteristic Turn-on Delay Time Symbol tpd0 Test Conditions VS = 70 V, RL = 465 Ω (10 Watts), Min. Typ. Max. Units — 200 — ns — 300 — ns CL = 15 pF (including probe and test fixture) Turn-off Delay Time tpd1 VS = 70 V, RL = 465 Ω (10 Watts), CL = 15 pF (including probe and test fixture) NOTES: 1. Typical values are at VCC = 5.0 V, TA = 25°C. 2. Each input tested separately. 3. Diode leakage current measured at VR = Voff (min). 4. Diode forward voltage drop measured at IF = 300 mA. 5. Per package. Notes 5706 QUAD PERIPHERAL/POWER DRIVER Dimensions in Inches 0.014 0.008 9 16 0.430 MAX 0.280 0.240 0.300 BSC 1 0.070 0.045 0.100 0.775 0.735 8 0.005 BSC MIN 0.210 MAX 0.015 0.150 0.115 MIN 0.022 0.014 Dwg. MA-001-16A in Dimensions in Millimeters (Based on 1” = 25.4 mm) 0.355 0.204 9 16 10.92 MAX 7.11 6.10 7.62 BSC 1 1.77 1.15 2.54 19.68 18.67 BSC 8 0.13 MIN 5.33 MAX 0.39 3.81 2.93 MIN 0.558 0.356 NOTES: 1. Lead thickness is measured at seating plane or below. 2. Lead spacing tolerance is non-cumulative. 3. Exact body and lead configuration at vendor’s option within limits shown. Dwg. MA-001-16A mm Allegro MicroSystems, Inc. reserves the right to make, from time to time, such departures from the detail specifications as may be required to permit improvements in the design of its products. Components made under military approvals will be in accordance with the approval requirements. The information included herein is believed to be accurate and reliable. However, Allegro MicroSystems, Inc. assumes no responsibility for its use; nor for any infringements of patents or other rights of third parties which may result from its use. 115 Northeast Cutoff, Box 15036 Worcester, Massachusetts 01615-0036 (508) 853-5000