SeriesOne DR Single Channel 3 Amps

SeriesOne DR Single Channel 3 Amps
AC/DC Output
•
•
•
OUTPUT SPECIFICATIONS (A)
3 Amps output power rating
60 & 100 VDC, 24 to 600 VAC operating voltage ratings
4-32 VDC, 24, 120 & 230 VAC control input options available
IP20 housing with unique integrated heat sink design
AC Output versions with Zero Voltage Turn-On for resistive
loads and Random Turn-On for inductive loads
High power density for multiple units
UL & cUL Listed
CE & RoHS compliant
DR06x03
DR10x03
DR24x03
DR48x03
1-60 VDC
1-100 VDC
24-280 VAC
48-600 VAC
Operating Voltage (47-63Hz AC Only)
3 ADC
3 ADC
3 Arms
3 Arms
UL Motor Controller Ratings @ 240 VAC [HP / FLA]
N/A
N/A
1/4 / 2.9
1/4 / 2.9
UL Motor Controller Ratings @ 380 VAC [HP / FLA]
N/A
N/A
N/A
1/3 / 2.3
UL Motor Controller Ratings @ 480 VAC [HP / FLA]
N/A
N/A
N/A
1/2 / 2.5
Min. Load Current
2.5 mA DC
2.5 mA DC
0.15 Arms
0.15 Arms
Max. Off-State Leakage Current @ Rated Voltage
General Use Current Rating (B) (Resistive Load)
0.1 mADC
0.1 mA DC
0.1 mArms
0.1 mArms
Max. Surge Current [Apk] (Duration in ms)
60 (10)
60 (10)
300 (16.6)
300 (16.6)
Max. Surge Current [Apk] (Duration in ms)
N/A
N/A
285 (20)
285 (20)
Transient Overvoltage [Vpk]
N/A
N/A
600
1200
Max. On-StateVoltage Drop @ Rated Current [Vpk]
0.6
0.6
1.3
1.3
On-State Resistence at rated load current [Ohm]
0.1
0.1
N/A
N/A
Max. l2t for Fusing (10/8.3 ms) [A2sec]
N/A
N/A
410/375
410/375
Min. Off-State dv/dt @ Max. Rated Voltage [V/µsec] (C)
Maximum Turn-On Time (D)
N/A
N/A
500
500
600 (µsec)
600 (µsec)
1/2 cycle
1/2 cycle
Maximum Turn-Off Time (E)
300 (µsec)
300 (µsec)
1/2 cycle
1/2 cycle
N/A
N/A
0.5
0.5
Power Factor (Minimum) with Maximum Load
INPUT SPECIFICATIONS (A)
DRxxD03
DRxxE03
DRxxB03
DRxxA03
4-32 VDC
18-36 VAC
90-140 VAC
200-265 VAC
Control Voltage Range
Minimum Turn-On Voltage
4 VDC
18 VAC
90 VAC
200 VAC
Minimum Turn-Off Voltage
1 VDC
4 VAC
10 VAC
90 VAC
Reverse Polarity Protection
Yes
N/A
N/A
N/A
6 mA @ 24 VAC
5 mA @ 120 VAC
3 mA @ 230 VAC
10 mA @ 24 VDC (F)
Typical Input Current
DRxxx03
Installed Single Unit and Multiple Units
3.0
Load Current (Amp)
•
•
•
•
•
1.0
0
0
10
20
30
40
50
60
70
Ambient Temperature (°C)
2.88
[73]
0.43
[11]
2.02
[51.2]
3.40
[86.4]
1.37
[34.8]
3.3
[83.7]
DRxxx03
GENERAL SPECIFICATIONS (A)
Dielectric Strength, Input to Output. AC Output Versions (50/60Hz) [Vrms]
4000
Dielectric Strength, Input to Output. DC Output Versions [Vrms]
2500
Dielectric Strength, Input-Output to Case (50/60Hz) [Vrms]
2500
Minimum Insulation Resistance (@ 500 VDC) [Ohm]
10
Maximum Capacitance, Input/Output [pF]
10
1.77 [45]
9
Ambient Operating Temperature Range [ºC]
-30 to 80
Ambient Storage Temperature Range [ºC]
-40 to125
2.59 [65.9]
3.45 [87.6]
1.76 (50)
UL 94 V0 Self-extinguishing
03
R
(H,J)
Switching Type
Blank: Zero Voltage Turn-On
(AC Output Only)
R: Random Turn-On
(AC Output Only)
General Notes
(A) All parameters at 25ºC unless otherwise specified
(B) Minimum spacing required between devices (see derating curves)
(C) Off-State dv/dt test method per EIA/NAR< standard RS-433, paragraph 13.11.1
(D) Turn-On time for Random-type AC output is 0.1 ms for DC control models and
20 ms for AC control models
Tel.: +1 (877) 502 5500
[email protected]
EMEA
AC/DC SUPPLY
2/T1
1/L1
Control Voltage
D: 4-32 VDC
A: 208-265 VAC
AC
Output
B: 90-140 VAC
Only
E: 18-36 VAC
INPUT
STATUS
Required for valid part number
For options only and not required for valid part number
D
2
24
4/A2
DR
AC/DC CONTROL
VOLTAGE
Rated Load Current
03: 3 Amps
06: 6 Amps
12: 12 Amps
+3/A1
Series
Operating Voltage
06: 1-60 VDC
10: 1-100 VDC
24: 24-280 VAC
48: 48-600 VAC
4/A
Part Number Nomenclature
(G)
1
Housing Material
+3/A
Weight (typical) [oz] (gr)
America
2.0
d
Loa
(E) Turn-Off time for AC Ootput versions with AC control is 30 ms
(F) Input circuit incorporates active current limitation
(G) No grounding wire required. DC inductive loads must be diode suppressed.
(H) 4 Terminal screws Pozidrive #1, 3/16 in (4.8 mm).
(J) Minimum wire insulation strip length 0.20 in (5.1 mm), maximum 0.28 in (7.1 mm).
Tel.: +44 (0) 1202 606030
[email protected]
Asia Pacific
Tel.: +86 (0) 21 6065 7725
[email protected]
HO/CR/SO/EN
Rev.030813
80