SPS8050 Semiconductor NPN Silicon Transistor Features • • • • • Low saturation medium current application Extremely low collector saturation voltage Suitable for low voltage large current drivers High DC current gain and large current capability Low on resistance : RON=0.6Ω(Max.) (IB=1mA) Ordering Information Type NO. SPS8050 Marking SPS8050 Package Code TO-92 Outline Dimensions unit : mm 1 2 3 PIN Connections 1. Emitter 2. Base 3. Collector KST-9104-002 1 SPS8050 Absolute maximum ratings Characteristic Symbol Ratings Unit Collector-Base voltage VCBO 15 V Collector-Emitter voltage VCEO 12 V Emitter-base voltage VEBO 6.5 V Collector current IC 1.5 A Collector dissipation PC 625 mW Junction temperature TJ 150 °C Storage temperature Tstg -55~150 °C Electrical Characteristics Characteristic Symbol Test Condition Min. Typ. Max. Unit Collector-base breakdown voltage BVCBO IC=50µA, IE=0 15 - - V Collector-Emitter breakdown voltage BVCEO IC=1mA, IB=0 12 - - V Emitter-base breakdown voltage BVEBO IE=50µA, IC=0 6.5 - - V Collector cut-off current ICBO VCB=15V, IE=0 - - 0.1 µA Emitter cut-off current IEBO VEB=6V, IC=0 - - 0.1 µA DC current gain hFE VCE=1V, IC=100mA 200 - 450 - IC=800mA, IB=80mA - - 0.5 V VCE=5V, IC=50mA - 260 - MHz Collector-Emitter saturation voltage Transistor frequency VCE(sat) fT Collector output capacitance Cob VCB=10V, IE=0, f=1MHz - 5 - pF On resistance RON f=1KHz, IB=1mA, VIN=0.3V - 0.6 - Ω KST-9104-002 2 SPS8050 Electrical Characteristic Curves Fig. 1 VCE(sat)-IC Fig. 3 hFE-IC Fig. 1 COb-VCB Fig. 4 RON-IB KST-9104-002 3 SPS8050 These AUK Corp. products are intended for usage in general electronic equipment (Office and communication equipment, measuring equipment, domestic electrification, etc.) Please make sure that you consult with us before you use these AUK products in equipm ents which require high quality and/or reliability, and in equipments which could have major impact to the welfare of human life(atomic energy control, airplane, spaceship, traffic signal, combustion central, all types of safety device, etc.) AUK cannot accept liability to any damage which may occur in case these AUK products were used in the mentioned equipments without prior consultation with AUK. KST-9104-002 4