STD361 Semiconductor NPN Silicon Transistor Description • Extremely low collector-to-emitter saturation voltage ( VCE(SAT)=0.2V Typ. @IC/IB=3A/150 ㎃) • Suitable for low voltage large current drivers • Switching Application Ordering Information Type NO. STD361 Marking Package Code YA SOT-89 Outline Dimensions unit : mm PIN Connections 1. Base 2. Collector 3. Emitter KST-8007-002 1 STD361 Absolute maximum ratings (Ta=25°C) Characteristic Symbol Ratings Unit Collector-Base voltage VCBO 40 V Collector-Emitter voltage VCEO 15 V Emitter-Base voltage VEBO 7 V IC 5 A PC 0.5 PC* 2 Junction temperature TJ 150 °C Storage temperature Tstg -55~150 °C Collector current Collector power dissipation W * : When mounted on 40×40×0.8 ㎜ ceramic substate Electrical Characteristics Characteristic (Ta=25°C) Symbol Test Condition Min. Typ. Max. Unit Collector-Base breakdown voltage BVCBO IC=50 ㎂, IE=0 40 - - V Collector-Emitter breakdown voltage BVCEO IC=1 ㎃, IB=0 15 - - V Emitter-Base breakdown voltage BVEBO IE=50 ㎂, IC=0 7 - - V Collector cut-off current ICBO VCB=30V, IE=0 - - 0.1 ㎂ Emitter cut-off current IEBO VEB=5V, IC=0 - - 0.1 ㎂ hFE1 VCE=2V, IC=500 ㎃ 160 - 320 - hFE2 VCE=2V, IC=3A 40 - - - DC current gain Collector-Emitter saturation voltage Transition frequency Collector output capacitance VCE(sat) IC=3A, IB=150 ㎃ - - 0.3 V fT VCE=6V, IE=-50 ㎃ - 150 - ㎒ VCB=20V, IE=0, f=1 ㎒ - - 50 ㎊ Cob KST-8007-002 2 STD361 Electrical Characteristic Curves Fig. 2 hFE - IC ㎽ Fig. 1 Pc - Ta ㎃ Fig. 4 fT - IC ㎷ ㎒ Fig. 3 VCE(sat) - IC ㎃ ㎃ ㎊ Fig. 5 Cob - VCB ㎒ KST-8007-002 3 STD361 These AUK products are intended for usage in general electronic equipments(Office and communication equipment, measuring equipment, domestic electrification, etc.). Please make sure that you consult with us before you use these AUK products in equipments which require high quality and/or reliability, and in equipments which could have major impact to the welfare of human life(atomic energy control, airplane, spaceship, traffic signal, combustion central, all types of safety device, etc.). AUK cannot accept liability to any damage which may occur in case these AUK products were used in the mentioned equipments without prior consultation with AUK. KST-8007-002 4