SBT5401F Semiconductor PNP Silicon Transistor Description • General purpose amplifier • High voltage application Features • High collector breakdown voltage : VCBO = -160V, VCEO = -160V • Low collector saturation voltage : VCE(sat)=-0.5V(MAX.) • Complementary pair with SBT5551F Ordering Information Type NO. SBT5401F Marking Package Code NFN SOT-23F Outline Dimensions unit : mm 1 3 2 PIN Connections 1. Base 2. Emitter 3. Collector KST-2096-001 1 SBT5401F Absolute maximum ratings (Ta=25°C) Characteristic Symbol Ratings Unit Collector-Base voltage VCBO -160 V Collector-Emitter voltage VCEO -160 V Emitter-Base voltage VEBO -5 V Collector current IC -600 mA Collector dissipation PC 200 mW Junction temperature Tj 150 °C Storage temperature Tstg -55~150 °C Electrical Characteristics Characteristic (Ta=25°C) Symbol Test Condition Min. Typ. Max. Unit Collector-Base breakdown voltage BVCBO IC=-100µA, IE=0 -160 - - V Collector-Emitter breakdown voltage BVCEO IC=-1mA, IB=0 -160 - - V Emitter-Base breakdown voltage BVEBO IE=-10µA, IC=0 -5 - - V Collector cut-off current ICBO VCB=-120V, IE=0 - - -100 nA Emitter cut-off current IEBO VEB=-3V, IC=0 - - -100 nA DC current gain hFE (1) VCE=-5V, IC=-1mA 50 - DC current gain hFE (2) VCE=-5V, IC=-10mA 60 - DC current gain hFE (3) 240 - VCE=-5V, IC=-50mA 50 - Collector-Emitter saturation voltage * VCE(sat)(1) IC=-10mA, IB=-1mA - - -0.2 V Collector-Emitter saturation voltage VCE(sat)(2)* IC=-50mA, IB=-5mA - - -0.5 V Base-Emitter saturation voltage * VBE(sat)(1) IC=-10mA, IB=-1mA - - -1 V Base-Emitter saturation voltage VBE(sat)(2)* IC=-50mA, IB=-5mA - - -1 V fT VCE=-10V, IC=-10mA 100 - 400 MHz - - 6 pF Transition frequency Collector output capacitance * Cob VCB=-10V, IE=0, f=1MHz - : Pulse Tester : Pulse Width ≤300µs, Duty Cycle ≤2.0% KST-2096-001 2 SBT5401F Electrical Characteristic Curves Fig. 1 hFE - IC Fig. 2 IC - VBE Fig. 3 fT - IC Fig. 4 VCE(sat), VBE(sat) - IC Fig. 5 Cob - VCB KST-2096-001 3 SBT5401F These AUK products are intended for usage in general electronic equipments(Office and communication equipment, measuring equipment, domestic electrification, etc.). Please make sure that you consult with us before you use these AUK products in equipments which require high quality and/or reliability, and in equipments which could have major impact to the welfare of human life(atomic energy control, airplane, spaceship, traffic signal, combustion central, all types of safety device, etc.). AUK cannot accept liability to any damage which may occur in case these AUK products were used in the mentioned equipments without prior consultation with AUK. KST-2096-001 4