CM2021 HDMI Receiver Port Protection and Interface Device Features Product Description • The CM2021 HDMI Receiver Port Protection and Interface Device is specifically designed for next generation HDMI Host interface protection. • • • • 0.05pF matching capacitance between the TMDS intra-pair Level shifting circuitry, including ±8kV ESD protection on all TMDS lines Matched 0.5mm trace spacing (TSSOP) Simplified layout for HDMI connectors Backdrive protection The CM2021 part is specifically designed to complement the CM2020 protection part in HDMI receivers (Displays, CE devices, etc.) Applications • • • • An integrated package provides all ESD, level shift and backdrive protection for an HDMI port in a single 38Pin TSSOP package. PC Consumer Electronics Set Top Box Displays and Digital Television Electrical Schematic TMDS_BYP 5V_SUPPLY TMDS_D2+ TMDS_D1+ TMDS_D0+ TMDS_CK+ TMDS_GND TMDS_GND TMDS_GND TMDS_GND TMDS_D2- TMDS_D1- TMDS_D0- TMDS_CK- 3.3V SUPPLY TMDS_BYP CE_REMOTE_IN 3.3V SUPPLY 3.3V SUPPLY CE_REMOTE_OUT DDC_DAT_OUT 3.3V SUPPLY TMDS_BYP DDC_CLK_IN DDC_DAT_IN DDC_CLK_OUT TMDS_BYP HOTPLUG_DET_IN TMDS_BYP HOTPLUG_DET_OUT © 2005 California Micro Devices Corp. All rights reserved. 03/22/05 430 N. McCarthy Blvd., Milpitas, CA 95035-5112 ● Tel: 408.263.3214 ● Fax: 408.263.7846 ● www.calmicro.com 1 CM2021 PACKAGE / PINOUT DIAGRAM TOP VIEW 5V_SUPPLY 1 38 NC 3.3V_SUPPLY 2 37 TMDS_BYP GND 3 36 GND TMDS_D2+ 4 35 NC TMDS_GND 5 34 TMDS_GND NC 6 TMDS_D2- TMDS_D1+ 7 33 32 TMDS_GND 8 31 TMDS_GND NC 9 30 TMDS_D1- TMDS_D0+ 10 29 NC TMDS_GND 11 28 TMDS_GND NC 12 27 TMDS_D0- TMDS_CK+ 13 26 NC TMDS_GND 25 TMDS_GND NC 14 15 24 TMDS_CK- CE_REMOTE_IN 16 23 CE_REMOTE_OUT DDC_CLK_IN 17 22 DDC_CLK_OUT DDC_DAT_IN 18 21 DDC_DAT_OUT HOTPLUG_DET_IN 19 20 HOTPLUG_DET_OUT NC 38-PIN TSSOP PACKAGE Note: This drawing is not to scale. PIN DESCRIPTIONS PINS NAME 37 TMDS_BYP DESCRIPTION This input pin is used to connect an optional external 0.1uF ceramic bypass capacitor only to enhance the ESD protection level. Note: Do not connect this pin to GND or any power rail. 4 TMDS_D2+ TMDS 0.9pF ESD protection. 33 TMDS_D2- TMDS 0.9pF ESD protection. 7 TMDS_D1+ TMDS 0.9pF ESD protection. 30 TMDS_D1- TMDS 0.9pF ESD protection. 10 TMDS_D0+ TMDS 0.9pF ESD protection. 27 TMDS_D0- TMDS 0.9pF ESD protection. 13 TMDS_CK+ TMDS 0.9pF ESD protection. 24 TMDS_CK- TMDS 0.9pF ESD protection. 16 CE_REMOTE_IN 23 CE_REMOTE_OUT 17 DDC_CLK_IN 22 DDC_CLK_OUT 18 DDC_DAT_IN 3.3V_SUPPLY referenced logic level in. 5V_SUPPLY referenced logic level out plus 3.5pF ESD. 3.3V_SUPPLY referenced logic level in. 5V_SUPPLY referenced logic level out plus 3.5pF ESD. 3.3V_SUPPLY referenced logic level in. 21 DDC_DAT_OUT 19 HOTPLUG_DET_IN 20 HOTPLUG_DET_OUT 2 3.3V_SUPPLY 1 5V_SUPPLY 6, 9, 12, 15, 26, 29, 32, 35, 38 NC 3, 5, 8, 11, 14, 25, 28, 31, 34, 36 GND / TDMS_GND 5V_SUPPLY referenced logic level out plus 3.5pF ESD. 3.3V_SUPPLY referenced logic level in. 5V_SUPPLY referenced logic level out plus 3.5pF ESD. Bias for CE / DDC / HOTPLUG level shifters. Bias for CE / DDC / HOTPLUG level shifters plus current source for 5V_OUT. No connect. GND reference. © 2005 California Micro Devices Corp. All rights reserved. 2 430 N. McCarthy Blvd., Milpitas, CA 95035-5112 ● Tel: 408.263.3214 ● Fax: 408.263.7846 ● www.calmicro.com 03/22/05 CM2021 Ordering Information PART NUMBERING INFORMATION Standard Finish Lead-free Finish Pins Package Ordering Part Number1 Part Marking Ordering Part Number1 Part Marking 38 TSSOP-38 CM2021-00TS CM2021-00TS CM2021-00TR CM2021-00TR Note 1: Parts are shipped in Tape & Reel form unless otherwise specified. Specifications ABSOLUTE MAXIMUM RATINGS PARAMETER RATING UNITS 6.0 V [GND - 0.5] to [VCC + 0.5] V VCC5, VCC3 DC Voltage at any Channel Input Storage Temperature Range -65 to +150 °C Operating Temperature Range -40 to +85 °C STANDARD (RECOMMENDED) OPERATING CONDITIONS SYMBOL PARAMETER 5V_SUPPLY Operating Supply Voltage 3V_SUPPLY Bias Supply Voltage MIN 1 TYP MAX UNITS 5 5.5 V 3.3 5.5 V © 2005 California Micro Devices Corp. All rights reserved. 03/22/05 430 N. McCarthy Blvd., Milpitas, CA 95035-5112 ● Tel: 408.263.3214 ● Fax: 408.263.7846 ● www.calmicro.com 3 CM2021 Specifications (cont’d) ELECTRICAL OPERATING CHARACTERISTICS SYMBOL PARAMETER CONDITIONS ICC5 Operating Supply Current 5V_SUPPLY = 5.0V ICC3 Bias Supply Current 3.3V_SUPPLY = 3.3V IOFF OFF state leakage current, level shifting NFET TYP MAX UNITS 110 130 µA 1 5 µA 3.3V_SUPPLY = 0V 0.1 5 µA Current conducted from output pins to V_SUPPLY rails when powered down 5V_SUPPLY < VCH_OUT; Signal pins: TMDS_[2:0]+/-, TMDS_CK+/-, CE_REMOTE_OUT, DDC_DAT_OUT, DDC_CLK_OUT, HOTPLUG_DET_OUT Only 0.1 5 µA VOLTAGE drop across level shifting NFET when ON 3.3V_SUPPLY = 2.5V, VS = GND, IDS = 3mA 75 95 140 mV Diode Forward Voltage Top Diode Bottom Diode IF = 8mA, TA = 25°C, Note 2 0.6 0.6 0.85 0.85 0.95 0.95 V V VESD ESD Withstand Voltage (IEC) Pins 4, 7,10,13, 20, 21, 22, 23, 24, 27, 30, 33; Notes 2 and 3 ±8 kV VESD ESD Withstand Voltage (HBM) Pins 1, 2, 16, 17, 18, 19, 37; Notes 2 and 4 ±2 kV Channel Clamp Voltage @ 8kV HBM ESD Positive Transients Negative Transients TA = 25°C, Notes 2 and 4 RDYN Dynamic Resistance Positive Transients Negative Transients I = 1A, TA = 25°C, Note 5 ILEAK TMDS Channel Leakage Current TA = 25°C, Note 2 0.01 1 µA TMDS Channel Input Capacitance 5V_SUPPLY = 5.0V, Measured at 1MHz, VBIAS=2.5V, Note 2 0.9 1.2 pF CIN Matching Capacitance 5V_SUPPLY = 5.0V, Measured at 1MHz, VBIAS=2.5V, Note 2, 6 0.05 pF CMUTUAL Mutual Capacitance between signal pin and NC pin 5V_SUPPLY= 0V, Measured at 1MHz, VBIAS=2.5V, Note 2 0.07 pF CIN, DDC Level Shifting Input Capacitance, Capacitance to GND 5V_SUPPLY = 0V, Measured at 100KHz, VBIAS=2.5V, Note 2 3.5 IBACKDRIVE VON VF VCL CIN, TMDS ∆CIN, TMDS MIN 9.0 -9.0 V V 3.0 1.5 Ω Ω 4 pF © 2005 California Micro Devices Corp. All rights reserved. 4 430 N. McCarthy Blvd., Milpitas, CA 95035-5112 ● Tel: 408.263.3214 ● Fax: 408.263.7846 ● www.calmicro.com 03/22/05 CM2021 ELECTRICAL OPERATING CHARACTERISTICS CIN, CEC Level Shifting Input Capacitance, Capacitance to GND 5V_SUPPLY = 0V, Measured at 100KHz, VBIAS=2.5V, Note 2 3.5 4 pF CIN, HP Level Shifting Input Capacitance, Capacitance to GND 5V_SUPPLY = 0V, Measured at 100KHz, VBIAS=2.5V, Note 2 3.5 4 pF Note 1: Operating Characteristics are over Standard Operating Conditions unless otherwise specified. Note 2: This parameter is guaranteed by design and verified by device characterization. Note 3: Standard IEC 61000-4-2, CDISCHARGE=150pF, RDISCHARGE=330Ω. Note 4: Human Body Model per MIL-STD-883, Method 3015, CDISCHARGE=100pF, RDISCHARGE=1.5kΩ Note 5: These measurements performed with no external capacitor on TMDS_BYP. Note 6: Intra-pair matching, each TMDS pair (i.e. D+, D-) © 2005 California Micro Devices Corp. All rights reserved. 03/22/05 430 N. McCarthy Blvd., Milpitas, CA 95035-5112 ● Tel: 408.263.3214 ● Fax: 408.263.7846 ● www.calmicro.com 5 CM2021 Performance Information Typical Filter Performance (TA=25°C, DC Bias=0V, 50 Ohm Environment) Figure 1. Insertion Loss vs. Frequency (TMDS_D1- to GND) © 2005 California Micro Devices Corp. All rights reserved. 6 430 N. McCarthy Blvd., Milpitas, CA 95035-5112 ● Tel: 408.263.3214 ● Fax: 408.263.7846 ● www.calmicro.com 03/22/05 CM2021 Application Information TMDS_D2+ TMDS_GND TMDS_D2TMDS_D1+ TMDS_GND TMDS_D1TMDS_D0+ TMDS_GND TMDS_D0TMDS_CK+ TMDS_GND TMDS_CKCE REMOTE N/C DDC_CLK DDC_DAT GND +5V IN HOTPLUG_DET 38 TSSOP HDMI CONN Figure 2. Typical Application for CM2021 © 2005 California Micro Devices Corp. All rights reserved. 03/22/05 430 N. McCarthy Blvd., Milpitas, CA 95035-5112 ● Tel: 408.263.3214 ● Fax: 408.263.7846 ● www.calmicro.com 7 CM2021 Mechanical Details TSSOP-38 Mechanical Specifications Mechanical Package Diagrams CM2021 devices are supplied in 38-pin TSSOP packages. Dimensions are presented below. For complete information on the TSSOP-38, see the California Micro Devices TSSOP Package Information document. TOP VIEW D 38 37 36 35 34 33 32 31 30 29 28 27 26 25 24 23 22 21 20 PACKAGE DIMENSIONS E Package TSSOP JEDEC No. MO-153 (Variation BD-1) Pins 38 Dimensions 1 Millimeters Min Max Min — 1.20 — 0.047 0.05 0.15 0.002 0.006 b 0.17 0.27 0.007 0.011 c 0.09 0.20 0.004 0.008 D 9.60 9.80 0.378 0.386 E1 e L # per tape and reel 4.30 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 SIDE VIEW A SEATING PLANE A1 b e 0.252 BSC 4.50 0.50 BSC 0.45 3 Max A 6.40 BSC 2 Inches A1 E E1 Pin 1 Marking 0.169 0.177 0.020 BSC 0.75 0.018 END VIEW c 0.030 2500 pieces L Controlling dimension: millimeters Package Dimensions for TSSOP-38 © 2005 California Micro Devices Corp. All rights reserved. 8 430 N. McCarthy Blvd., Milpitas, CA 95035-5112 ● Tel: 408.263.3214 ● Fax: 408.263.7846 ● www.calmicro.com 03/22/05