Solid State Relay OCMOS FET PS7241-2B 8-PIN SOP, 400 V BREAK DOWN VOLTAGE NORMALLY CLOSE TYPE 2-ch Optical Coupled MOS FET DESCRIPTION The PS7241-2B is a solid state relay containing GaAs LEDs on the light emitting side (input side) and normally close (N.C.) contact MOS FETs on the output side. It is suitable for analog signal control because of their low offset and high linearity. FEATURES • 2 channel type (1 b + 1 b output) • Low LED operating current (IF = 2 mA) • Designed for AC/DC switching line changer • Small and thin package (8-pin SOP, Height = 2.1 mm) • Low offset voltage • Ordering number of taping product: PS7241-2B-F3, F4 • UL approved: File No. E72422 (S) • BSI approved: No. 8241/8242 • CSA approved: No. CA 101391 APPLICATIONS • Exchange equipment • Measurement equipment • FA/OA equipment Document No. PN10305EJ01V1DS (1st edition) (Previous No. P13265EJ4V0DS00) Date Published February 2003 CP(K) The mark shows major revised points. PS7241-2B PACKAGE DIMENSIONS 0.4±0.3 (in millimeters) 9.08±0.5 TOP VIEW 8 7 6 5 1 2 3 4 7.0±0.3 0.05+0.08 –0.05 2.05+0.08 –0.05 0.15+0.10 –0.05 4.4 2 0.5±0.3 2.54 0.40+0.10 –0.05 0.25 M Data Sheet PN10305EJ01V1DS 1. LED Anode 2. LED Cathode 3. LED Anode 4. LED Cathode 5. MOS FET 6. MOS FET 7. MOS FET 8. MOS FET PS7241-2B ORDERING INFORMATION (Solder Contains Lead) Part Number PS7241-2B Package Packing Style 8-pin SOP Magazine case 45 pcs PS7241-2B -F3 Application Part Number *1 PS7241-2B Embossed Tape 1 500 pcs/reel PS7241-2B -F4 *1 For the application of the Safety Standard, following part number should be used. ORDERING INFORMATION (Pb-Free) Part Number PS7241-2B-A Package Packing Style 8-pin SOP Magazine case 45 pcs PS7241-2B -F3-A Application Part Number *1 PS7241-2B Embossed Tape 1 500 pcs/reel PS7241-2B -F4-A *1 For the application of the Safety Standard, following part number should be used. ABSOLUTE MAXIMUM RATINGS (TA = 25 °C, unless otherwise specified) Parameter Symbol Ratings Unit Forward Current (DC) IF 50 mA Reverse Voltage VR 5 V PD 50 mW/ch IFP 1 A Break Down Voltage VL 400 V Continuous Load Current IL 120 mA Pulse Load Current (AC/DC Connection) ILP 200 mA Power Dissipation PD 180 mW/ch BV 1 500 Vr.m.s. Total Power Dissipation PT 460 mW Operating Ambient Temperature TA −40 to +85 °C Storage Temperature Tstg −40 to +100 °C Diode Power Dissipation Peak Forward Current MOS FET *1 *2 Isolation Voltage *3 *1 PW = 100 µs, Duty Cycle = 1 % *2 PW = 100 ms, 1 shot *3 AC voltage for 1 minute at TA = 25 °C, RH = 60 % between input and output Data Sheet PN10305EJ01V1DS 3 PS7241-2B RECOMMENDED OPERATING CONDITIONS (TA = 25 °C) Parameter Symbol MIN. TYP. MAX. Unit LED Operating Current IF 2 10 20 mA LED Off Voltage VF 0 0.5 V ELECTRICAL CHARACTERISTICS (TA = 25 °C) Parameter Diode MOS FET Symbol Conditions MIN. TYP. MAX. Unit 1.2 1.4 V 5 µA 1.0 µA Forward Voltage VF IF = 10 mA Reverse Current IR VR = 5 V Off-state Leakage ILoff IF = 10 mA, VD = 400 V 0.03 Output Capacitance Cout IF = 10 mA, VD = 0 V, f = 1.0 MHz 185 LED Off-state Current IFoff IL = 120 mA On-state Resistance Ron1 IF = 0 mA, IL = 10 mA Current Coupled pF/ch 2.0 mA 21 30 Ω Ron2 IF = 0 mA, IL = 120 mA, t ≤ 10 ms 16 25 Turn-on Time *1 ton IF = 10 mA, VO = 5 V, RL = 500 Ω, 0.02 0.2 Turn-off Time *1 toff PW ≥ 10 ms 0.1 1.0 Isolation Resistance RI-O VI-O = 1.0 kVDC Isolation Capacitance CI-O V = 0 V, f = 1.0 MHz 10 ms Ω 9 0.4 pF/ch *1 Test Circuit for Switching Time IF Pulse Input VL Input 50 % 0 VO = 5 V Input monitor 90 % VO monitor Output Rin RL 10 % toff 4 Data Sheet PN10305EJ01V1DS ton PS7241-2B TYPICAL CHARACTERISTICS (TA = 25 °C, unless otherwise specified) MAXIMUM FORWARD CURRENT vs. AMBIENT TEMPERATURE MAXIMUM LOAD CURRENT vs. AMBIENT TEMPERATURE 300 Maximum Load Current IL (mA) Maximum Forward Current IF (mA) 100 80 60 40 20 0 –25 0 25 7585 50 200 100 0 –25 100 0 25 75 85 50 Ambient Temperature TA (˚C) Ambient Temperature TA (˚C) FORWARD VOLTAGE vs. AMBIENT TEMPERATURE OUTPUT CAPACITANCE vs. APPLIED VOLTAGE 1.6 100 200 IF = 50 mA 30 mA 20 mA 10 mA 5 mA 1.2 1.0 1 mA 0.8 –25 25 50 75 150 100 50 0 100 20 40 60 80 100 120 Ambient Temperature TA (˚C) Applied Voltage VD (V) OFF-STATE LEAKAGE CURRENT vs. APPLIED VOLTAGE LOAD CURRENT vs. LOAD VOLTAGE 10–5 Off-state Leakage Current ILoff (A) 0 Output Capacitance Cout (pF) 1.4 200 IF = 10 mA IF = 0 mA TA = 85 ˚C 10–6 Load Current IL (mA) Forward Voltage VF (V) f = 1 MHz 10–7 25 ˚C 10–8 10–9 0 100 200 300 400 100 –4.0 500 –2.0 0 2.0 4.0 –100 –200 Load Voltage VL (V) Applied Voltage VD (V) Data Sheet PN10305EJ01V1DS 5 PS7241-2B NORMALIZED ON-STATE RESISTANCE vs. AMBIENT TEMPERATURE ON-STATE RESISTANCE DISTRIBUTION 30 Normalized to 1.0 at TA = 25 ˚C, IF = 0 mA, IL = 10 mA 2.5 2.0 1.5 1.0 n = 50 pcs, IF = 0 mA, IL = 10 mA 25 Number (pcs) Normalized On-state Resistance Ron 3.0 20 15 10 5 0.5 0.0 –25 0 25 50 75 0 100 19 20 21 22 Ambient Temperature TA (˚C) On-state Resistance Ron (Ω) TURN-ON TIME vs. FORWARD CURRENT TURN-OFF TIME vs. FORWARD CURRENT 0.30 1.2 VO = 5 V VO = 5 V 1.0 Turn-off Time toff (ms) Turn-on Time ton (ms) 0.25 0.20 0.15 0.10 0 5 10 15 20 25 30 0.4 5 10 15 20 25 Forward Current IF (mA) Forward Current IF (mA) TURN-ON TIME DISTRIBUTION TURN-OFF TIME DISTRIBUTION 30 n = 50 pcs, IF = 10 mA, VO = 5 V 25 20 15 10 n = 50 pcs, IF = 10 mA, VO = 5 V 25 Number (pcs) Number (pcs) 0.6 0 30 20 15 10 5 5 0 0.8 0.2 0.05 0.02 0.04 0 0.1 0.2 Turn-off Time toff (ms) Turn-on Time ton (ms) 6 23 Data Sheet PN10305EJ01V1DS 30 PS7241-2B NORMALIZED TURN-OFF TIME vs. AMBIENT TEMPERATURE NORMALIZED TURN-ON TIME vs. AMBIENT TEMPERATURE 3.0 Normalized to 1.0 at TA = 25 ˚C, IF = 10 mA, VO = 5 V 2.5 2.0 1.5 1.0 0.5 0.0 –25 0 25 50 75 100 Normalized Turn-off Time toff Normalized Turn-on Time ton 3.0 Normalized to 1.0 at TA = 25 ˚C, IF = 10 mA, VO = 5 V 2.5 2.0 1.5 1.0 0.5 0.0 –25 0 25 50 75 100 Ambient Temperature TA (˚C) Ambient Temperature TA (˚C) Remark The graphs indicate nominal characteristics. Data Sheet PN10305EJ01V1DS 7 PS7241-2B TAPING SPECIFICATIONS (in millimeters) 1.55±0.1 2.8 MAX. 9.6±0.1 7.5±0.1 1.55 +0.1 –0 16.0±0.3 2.0±0.05 4.0±0.1 1.75±0.1 Outline and Dimensions (Tape) 2.3±0.1 7.6±0.1 12.0±0.1 0.3 Tape Direction PS7241-2B-F3 PS7241-2B-F4 Outline and Dimensions (Reel) 2.0±0.5 R 1.0 100±1.0 330±2.0 2.0±0.5 13.0±0.2 21.0±0.8 17.5±1.0 21.5±1.0 Packing: 1 500 pcs/reel 8 Data Sheet PN10305EJ01V1DS 15.9 to 19.4 Outer edge of flange PS7241-2B RECOMMENDED SOLDERING CONDITIONS (1) Infrared reflow soldering • Peak reflow temperature 260°C or below (package surface temperature) • Time of peak reflow temperature 10 seconds or less • Time of temperature higher than 220°C 60 seconds or less • Time to preheat temperature from 120 to 180°C 120±30 s • Number of reflows Three • Flux Rosin flux containing small amount of chlorine (The flux with a maximum chlorine content of 0.2 Wt% is recommended.) Package Surface Temperature T (˚C) Recommended Temperature Profile of Infrared Reflow (heating) to 10 s 260˚C MAX. 220˚C to 60 s 180˚C 120˚C 120±30 s (preheating) Time (s) (2) Wave soldering • Temperature 260°C or below (molten solder temperature) • Time 10 seconds or less • Preheating conditions 120°C or below (package surface temperature) • Number of times One • Flux Rosin flux containing small amount of chlorine (The flux with a maximum chlorine content of 0.2 Wt% is recommended.) (3) Cautions • Fluxes Avoid removing the residual flux with freon-based and chlorine-based cleaning solvent. Data Sheet PN10305EJ01V1DS 9 4590 Patrick Henry Drive Santa Clara, CA 95054-1817 Telephone: (408) 919-2500 Facsimile: (408) 988-0279 Subject: Compliance with EU Directives CEL certifies, to its knowledge, that semiconductor and laser products detailed below are compliant with the requirements of European Union (EU) Directive 2002/95/EC Restriction on Use of Hazardous Substances in electrical and electronic equipment (RoHS) and the requirements of EU Directive 2003/11/EC Restriction on Penta and Octa BDE. CEL Pb-free products have the same base part number with a suffix added. The suffix –A indicates that the device is Pb-free. The –AZ suffix is used to designate devices containing Pb which are exempted from the requirement of RoHS directive (*). In all cases the devices have Pb-free terminals. All devices with these suffixes meet the requirements of the RoHS directive. This status is based on CEL’s understanding of the EU Directives and knowledge of the materials that go into its products as of the date of disclosure of this information. Restricted Substance per RoHS Concentration Limit per RoHS (values are not yet fixed) Concentration contained in CEL devices -A Not Detected Lead (Pb) < 1000 PPM Mercury < 1000 PPM Not Detected Cadmium < 100 PPM Not Detected Hexavalent Chromium < 1000 PPM Not Detected PBB < 1000 PPM Not Detected PBDE < 1000 PPM Not Detected -AZ (*) If you should have any additional questions regarding our devices and compliance to environmental standards, please do not hesitate to contact your local representative. Important Information and Disclaimer: Information provided by CEL on its website or in other communications concerting the substance content of its products represents knowledge and belief as of the date that it is provided. CEL bases its knowledge and belief on information provided by third parties and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. CEL has taken and continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals. CEL and CEL suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release. In no event shall CEL’s liability arising out of such information exceed the total purchase price of the CEL part(s) at issue sold by CEL to customer on an annual basis. See CEL Terms and Conditions for additional clarification of warranties and liability.