CPC1822 4V Output Solar Cell Open Circuit Voltage CPC1822 4 Units V Short Circuit Current 50 uA Description The CPC1822 is a monolithic photovoltaic string of solar cells with switching circuitry. When operating in sunlight or a bright artificial light environment the optical energy will activate the cell array and generate a voltage at the output. The solar cells are capable of generating a floating source voltage and current sufficient to drive and power CMOS IC’s, logic gates and/or provide “trickle charge” for battery applications. * Direct sunlight (Approximately 6000 lux) Features Ordering Information Description 8-Pin Clear Molded SOIC Package A Part # CPC1822N Pin Configuration Applications EL IM Portable Electronics Solar Battery Chargers Battery Operated Equipment Consumer Electronics Off-Grid Installation Wireless Sensors and Detection Self Powered Sunlight/ Light Detection Self Powered Products Remote Installation 1 2 8 V+ 7 3 6 4 5 V- 8-Pin SOIC PR • • • • • • • • • RY 4V Output Triggers with Natural Sunlight Provides True Wireless Power No EMI/RFI Generation Wave Solderable Replacement of Discrete Components Solid State Reliability Small 8-Pin Surface Mount SOIC IN • • • • • • • • DS-CPC1822-R0B www.clare.com 1 CPC1822 Absolute Maximum Ratings Parameter Reverse Voltage Ratings 10 Units V Operational Temperature -40 to +85 °C Storage Temperature -40 to +125 °C Absolute Maximum Ratings are stress ratings. Stresses in excess of these ratings can cause permanent damage to the device. Functional operation of the device at conditions beyond those indicated in the operational sections of this data sheet is not implied. Electrical absolute maximum ratings are at 25°C Parameter Output Characteristics @ 25°C Open Circuit Voltage Symbol Direct Sun (6000 lux) VOC High Intensity Lamp VOC Direct Sun (6000 lux) ISC Min Typ Max Units - 4.2 - V - 4.5 - V - 50 - µA PR EL IM IN A Short Circuit Current Conditions RY Electrical Characteristics 2 www.clare.com R0B CPC1822 PERFORMANCE DATA* Normalized Output Current Normalized Output Voltage 4.5 4.0 3.5 3.0 2.5 2.0 1.5 1.0 0.5 0 0 2 4 6 8 10 2.50 2.25 2.00 1.75 1.50 1.25 1.00 0.75 0.50 0.25 0.00 CPC1822 Normalized Short Circuit Output Current vs. Light Intensity 0 CPC1822 Normalized Open Circuit Output Voltage vs. Incident Angle of Light to Photodiode Surface 0.6 0.4 0.2 0.0 60 80 100 1.0 0.8 0.6 0.4 0.2 0.0 IM 40 0 20 40 60 80 100 Incident Angle (Degrees) PR EL Incident Angle (Degrees) 10 IN 0.8 20 8 A 1.2 1.0 0 6 CPC1822 Normalized Short Curcuit Output Current vs. Incident Angle of Light to Photodiode Surface Normalized Output Current Normalized Output Voltage 4 Light Intensity (lux X 1000) Light Intensity (lux X 1000) 1.2 2 RY CPC1822 Normalized Open Circuit Output Voltage vs. Light Intensity *The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written specifications, please contact our application department. R0B www.clare.com 3 Manufacturing Information Soldering Recommended soldering processes are limited to 245ºC component body temperature for 10 seconds. Washing Clare does not recommend ultrasonic cleaning or the use of chlorinated solvents. RY MECHANICAL DIMENSIONS 8-Pin SOIC 5.8014 MIN - 6.1976 MAX (0.2284 MIN - 0.2440 MAX) 3.8024 MIN - 3.9980 MAX (0.1497 MIN - 0.1574 MAX) 7° ± 1° top and bottom 4 places 0.2515 MIN - 0.4978 MAX x 45° (0.0099 MIN - 0.0196 MAX x 45°) 1.3513 MIN - 1.7475 MAX (0.0532 MIN - 0.0688 MAX) 0.3302 MIN - 0.5080 MAX (0.0130 MIN - 0.0200 MAX) PR EL 0.1016 MIN - 0.2489 MAX (0.0040 MIN - 0.0098 MAX) 0.6706 MIN - 0.8230 MAX (0.0264 MIN - 0.0324 MAX) IM 4.8006 MIN - 4.9987 MAX (0.1890 MIN - 0.1968 MAX) IN PIN 1 A PIN 8 0.1905 MIN - 0.2489 MAX (0.0075 MIN - 0.0098 MAX) 0°-8° 0.4064 MIN - 1.2700 MAX (0.0160 MIN - 0.0500 MAX) 1.2192 MIN - 1.3208 MAX (0.0480 MIN - 0.0520 MAX) Dimensions: mm (inches) For additional information please visit our website at: www.clare.com Clare, Inc. makes no representations or warranties with respect to the accuracy or completeness of the contents of this publication and reserves the right to make changes to specifications and product descriptions at any time without notice. Neither circuit patent licenses nor indemnity are expressed or implied. Except as set forth in Clare’s Standard Terms and Conditions of Sale, Clare, Inc. assumes no liability whatsoever, and disclaims any express or implied warranty, relating to its products including, but not limited to, the implied warranty of merchantability, fitness for a particular purpose, or infringement of any intellectual property right. The products described in this document are not designed, intended, authorized or warranted for use as components in systems intended for surgical implant into the body, or in other applications intended to support or sustain life, or where malfunction of Clare’s product may result in direct physical harm, injury, or death to a person or severe property or environmental damage. Clare, Inc. reserves the right to discontinue or make changes to its products at any time without notice. Specification: DS-CPC1822-R0B ©Copyright 2005, Clare, Inc. All rights reserved. Printed in USA. 8/23/05