TI SN75116

SN55116, SN75116, SN75117, SN75118, SN75119
DIFFERENTIAL LINE TRANSCEIVERS
SLLS073D – MAY 1976 – REVISED MAY 1998
features common to all types
D
D
D
D
D
D
D
additional features of the SN55116/SN75116
Single 5-V Supply
3-State Driver Output Circuitry
TTL-Compatible Driver Inputs
TTL-Compatible Receiver Output
Differential Line Operation
Receiver Output Strobe (SN55116,
SN75116, SN75117) or Enable (SN75118,
SN75119)
Designed for Party-Line (Data-Bus)
Applications
D
D
D
D
D
D
D
Choice of Ceramic or Plastic Packages
Independent Driver and Receiver
Choice of Open-Collector or Totem-Pole
Outputs on Both Driver and Receiver
Dual Data Inputs on Driver
Optional Line-Termination Resistor in
Receiver
± 15-V Receiver Common-Mode Capability
Receiver Frequency-Response Control
additional features of the SN75117
D
Driver Output Internally Connected to
Receiver Input
The SN75118 is an SN75116 With 3-State Receiver Output Circuitry
The SN75119 is an SN75117 With 3-State Receiver Output Circuitry
description
These integrated circuits are designed for use in interfacing between TTL-type digital systems and differential
data-transmission lines. They are especially useful for party-line (data-bus) applications. Each of these circuit
types combine in one package a 3-state differential line driver and a differential-input line receiver, both of which
operate from a single 5-V power supply. The driver inputs and the receiver outputs are TTL compatible. The
driver employed is similar to the SN55113 and SN75113 3-state line drivers, and the receiver is similar to the
SN55115 and SN75115 line receivers.
The SN55116, SN75116, and SN75118 offer all the features of the SN55113 and SN75113 drivers and the
SN55115 and SN75115 receivers combined. The driver performs the dual input AND and NAND functions when
enabled or presents a high impedance to the load when in the disabled state. The driver output stages are similar
to TTL totem-pole outputs, but have the current-sinking portion separated from the current-sourcing portion and
both are brought out to adjacent package terminals. This feature allows the user the option of using the driver
in the open-collector output configuration, or, by connecting the adjacent source and sink terminals together,
of using the driver in the normal totem-pole output configuration.
The receiver portion of the SN55116, SN75116, and SN75118 features a differential-input circuit having a
common-mode voltage range of ± 15 V. An internal 130-Ω equivalent resistor also is provided, which optionally
can be used to terminate the transmission line. A frequency-response control terminal allows the user to reduce
the speed of the receiver or to improve differential noise immunity. The receivers of the SN55116 and SN75116
have an output strobe and a split totem-pole output. The receiver of the SN75118 has an output-enable for the
3-state split totem-pole output. The receiver section of either circuit is independent of the driver section except
for the VCC and ground terminals.
The SN75117 and SN75119 provide the basic driver and receiver functions of the SN55116, SN75116, and
SN75118, but use a package that is only half as large. The SN75117 and SN75119 are intended primarily for
party-line or bus-organized systems because the driver outputs are internally connected to the receiver inputs.
The driver has a single data input and a single enable input. The SN75117 receiver has an output strobe, while
the SN75119 receiver has a 3-state output enable. However, these devices do not provide output connection
options, line-termination resistors, or receiver frequency-response controls.
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
Copyright  1998, Texas Instruments Incorporated
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of Texas Instruments
standard warranty. Production processing does not necessarily include
testing of all parameters.
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
1
SN55116, SN75116, SN75117, SN75118, SN75119
DIFFERENTIAL LINE TRANSCEIVERS
SLLS073D – MAY 1976 – REVISED MAY 1998
description (continued)
The SN55116 is characterized for operation over the full military temperature range of – 55°C to 125°C. The
SN75116, SN75117, SN75118, and SN75119 are characterized for operation from 0°C to 70°C.
SN55116 . . . J PACKAGE
SN75116 . . . D OR N PACKAGE
(TOP VIEW)
1
DZP
DZS
DYS
DYP
RA
RT
RB
GND
16
2
15
3
14
4
13
5
12
6
11
7
10
8
9
SN75118 . . . D OR N PACKAGE
(TOP VIEW)
DZP
DZS
DYS
DYP
RA
RT
RB
GND
VCC
DB
DA
DE
RYP
RYS
RS
RTC
SN55116 . . . FK PACKAGE
(TOP VIEW)
DZS
DZP
NC
VCC
DB
4
3 2 1 20 19
18
5
17
6
16
7
15
8
14
9 10 11 12 13
16
2
15
3
14
4
13
5
12
6
11
7
10
8
9
VCC
DB
DA
DE
RYP
RYS
RE
RTC
SN75117 . . . D OR P PACKAGE
(TOP VIEW)
DI
B
A
GND
DA
DE
NC
RYP
RYS
1
8
2
7
3
6
4
5
VCC
DE
RY
RS
SN75119 . . . D OR P PACKAGE
(TOP VIEW)
DI
B
A
GND
RB
GND
NC
RTC
RS
DYS
DYP
NC
RA
RT
1
1
8
2
7
3
6
4
5
VCC
DE
RY
RE
NC – No internal connection
Function Tables
’116, SN75118
DRIVER
INPUTS
DE
DA
DB
L
H
H
H
X
L
X
H
X
X
L
H
SN75117, SN75119
DRIVER
INPUTS
OUTPUTS
DY
DZ
Z
H
H
L
Z
L
L
H
DI
DE
H
L
X
H
H
L
DIFF
INPUT
L
H
H
X
L
H
L
H
Z
INPUTS
OUTPUTS RY
’116
SN75118
H
H
L
H
L
Z
SN75117, SN75119
RECEIVER
’116, SN75118
RECEIVER
RS/RE
OUTPUTS
A
B
Z
H
L
A
B
H
L
X
L
H
X
OUTPUT RY
RS/RE SN75117 SN75119
H
H
L
H
L
H
H
L
Z
H = high level (VI ≥ VIH min or VID more positive than VTH max), L = low level (VI ≤ VIL max or VID more negative than VTL max),
X = irrelevant, Z = high impedance (off)
2
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
SN55116, SN75116, SN75117, SN75118, SN75119
DIFFERENTIAL LINE TRANSCEIVERS
SLLS073D – MAY 1976 – REVISED MAY 1998
logic symbol†
logic diagram (positive logic)
’116‡
4
&
DE
DA
DB
RB
RA
RT
RS
RTC
13
14
3
EN
1
2
15
7
DE
DYS
RT
11
DZS
DB
DA
DB
RB
RA
RT
RE
RTC
14
DI
RS
RY
15
1
RYP
2
RYS
RB
4
3
EN
1
2
15
DYP
RA
DYS
RT
DZP
RTC
DZS
RS
7
RE
RY
DZP (pullup)
DZS (sink)
12
5
11
6
RYP (pullup)
RYS (sink)
9
10
5
6
10
9
12
RT
11
EN
RESP
SN75118 Receiver‡
RYP
RE
RYS
RB
RA
RT
7
1
3
EN
5
RTC
2
10
7
12
5
11
6
1
SN75117 Driver and Receiver‡
B
RS
&
DE
5
6
EN
RYS (sink)
A
6
7
RYP (pullup)
9
5
7
6
1
3
SN75119‡
DI
DYS (sink)
7
DI
DE
DYP (pullup)
’116 Receiver‡
SN75117‡
DE
14
RESP
&
13
4
3
SN75118‡
DE
13
DZP
DA
12
10
9
DYP
&
5
6
’116 and SN75118‡
2
3
2
RY
A
B
BUS
A
B
RE
EN
DE
DI
5
SN75119 Driver and Receiver‡
7
1
6
3
2
RY
A
B
BUS
† These symbols are in accordance with ANSI/IEEE Std 91-1984 and IEC Publication 617-12.
‡ Pin numbers shown for the SN55116 and SN75116 are for the D, J, and N packages, those shown for the SN75118 are for the D and N packages,
and those shown for SN75117 and SN75119 are for the D and P packages.
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
3
SN55116, SN75116, SN75117, SN75118, SN75119
DIFFERENTIAL LINE TRANSCEIVERS
SLLS073D – MAY 1976 – REVISED MAY 1998
schematics of inputs and outputs
EQUIVALENT OF
EACH DRIVER INPUT
AND EACH RE AND RS INPUT
VCC
4 kΩ
NOM
TYPICAL OF ALL OUTPUTS
EQUIVALENT OF
EACH RECEIVER INPUT
(EXCLUDING ENABLES AND STROBES)
VCC
VCC
1 pF NOM
Input
Input
7 kΩ
NOM
8 kΩ
NOM
R
Pullup
output†
Sink
output†
130 Ω
NOM
Driver output R = 9 Ω NOM
Receiver output R = 20 Ω NOM
† On SN75117 and SN75119, common outputs
replace the separate pullup and sink outputs.
absolute maximum ratings over operating free-air temperature (unless otherwise noted)‡
Supply voltage, VCC (see Notes 1 and 2) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 V
Input voltage, VI: DA, DB, DE, DI, RE, and RS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5.5 V
RA, RB, RT for ’116, SN75118 only . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ±25 V
A and B for SN75117, SN75119 only . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0 to 6 V
Off-state voltage applied to open-collector outputs: ’116, SN75118 only . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 V
Continuous total power dissipation (see Note 2) . . . . . . . . . . . . . . . . . . . . . . . . . . See Dissipation Rating Table
Storage temperature range, Tstg . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . – 65°C to 150°C
Case temperature for 60 seconds, TC: FK package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 260°C
Lead temperature 1,6 mm (1/16 inch) from case for 60 seconds: J package . . . . . . . . . . . . . . . . . . . . . 300°C
Lead temperature 1,6 mm (1/16 inch) from case for 10 seconds: D, N, or P package . . . . . . . . . . . . . 260°C
‡ Stresses beyond those listed under “absolute maximum ratings” may cause permanent damage to the device. These are stress ratings only, and
functional operation of the device at these or any other conditions beyond those indicated under “recommended operating conditions” is not
implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
NOTES: 1. All voltage values are with respect to the network ground terminal.
2. In the FK and J packages, the SN55116 chip is alloy mounted. The SN75116, SN75117, SN75118, and SN75119 chips are glass
mounted.
4
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
SN55116, SN75116, SN75117, SN75118, SN75119
DIFFERENTIAL LINE TRANSCEIVERS
SLLS073D – MAY 1976 – REVISED MAY 1998
DISSIPATION RATING TABLE
PACKAGE
TA ≤ 25°C
POWER RATING
DERATING FACTOR
ABOVE TA = 25°C
TA = 70°C
POWER RATING
TA = 125°C
POWER RATING
D (8 pin)
725 mW
5.8 mW/°C
464 mW
—
D (16 pin)
950 mW
7.6 mW/°C
608 mW
—
FK
1375 mW
11.0 mW/°C
880 mW
275 mW
J
1375 mW
11.0 mW/°C
880 mW
275 mW
N
1150 mW
9.2 mW/°C
736 mW
—
P
1000 mW
8.0 mW/°C
640 mW
—
recommended operating conditions
Supply voltage, VCC
High-level input voltage, VIH
Low-level input voltage, VIL
High level output current,
High-level
current IOH
Low level output current,
current IOL
Low-level
Receiver input voltage,
voltage VI
Common mode receiver input voltage,
Common-mode
voltage VICR
SN75116, SN75117,
SN75118, SN75119
SN55116
PARAMETER
All inputs except differential
inputs
UNIT
MIN
NOM
MAX
MIN
NOM
MAX
4.5
5
5.5
4.5
5
5.5
2
2
V
0.8
0.8
– 40
– 40
Receivers
–5
–5
Drivers
40
40
Receivers
15
15
± 15
± 15
Drivers
’116, SN75118
SN75117, SN75119
0
Operating free-air temperature, TA
POST OFFICE BOX 655303
0
± 15
’116, SN75118
SN75117, SN75119
6
6
± 15
0
6
0
6
– 55
125
0
70
• DALLAS, TEXAS 75265
V
V
mA
mA
V
V
°C
5
VIK
VOH
VOL
VOK
’116, SN75118
MAX
TYP‡
TEST CONDITIONS†
PARAMETER
Input clamp voltage
VCC = MIN,
High-level output voltage
VCC = MIN
MIN,
VIL = 0.8 V,
IIH = 2 V
Low-level output voltage
VCC = MIN,
VCC = MAX,
Output clamp voltage
MIN
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
Off-state open-collector
o en-collector out
output
ut current
VCC = MAX,
VO = 12 V
VCC = MAX,
IOZ
II
Off-state
Off
state (high-impedance-state)
(high impedance state)
output current
Input current at maximum
input voltage
Driver or
enable input
VCC = MAX
MAX,
DE at 0.8 V,
TA = MAX
– 0.9
V
IOH = – 10 mA
2.4
3.4
2.4
3.4
IOH = – 40 mA
2
3
2
3
TA = – 55°C to 125°C
(SN55116)
IOH = – 10 mA
IOH = – 40 mA
2
2
1.8
1.8
VIL = 0.8 V, IOL = 40 mA
DE at 0.8 V
TA = 25°C
IO(off)
UNIT
II = – 12 mA
TA = 25°C (SN55116),
TA = 0°C to 70°C
(SN75116, SN75117,
SN75118, SN75119)
VIH = 2 V,
IO = – 40 mA,
– 0.9
SN75117, SN75119
MIN TYP‡ MAX
1
– 1.5
V
0.4
0.4
V
– 1.5
– 1.5
V
10
SN55116
200
SN75116,
SN75118
20
DE at 0.8 V, TA = 25°C
SN55116
– 300
TA = MAX
VO = 0 to VCC,
VO = 0
– 1.5
µA
± 10
VO = 0.4 V to VCC
SN55116
± 150
VO = 0 to VCC
SN75116,
SN75118
± 20
µA
VCC = MAX
MAX,
VI = 5
5.5
5V
1
40
40
µA
– 1.6
– 1.6
mA
IIH
IIL
High-level input current
Low-level input current
VCC = MAX,
VCC = MAX,
VI = 2.4 V
VI = 0.4 V
IOS
Short-circuit output current§
VCC = MAX,
VO = 0,
ICC
Supply
y current ((driver and receiver
combined)
VCC = MAX
MAX,
TA = 25°C
TA = 25°C
– 40
42
1
mA
– 120
– 40
– 120
mA
60
42
60
mA
† All parameters with the exception of off-state open-collector output current are measured with the active pullup connected to the sink output. For conditions shown as MIN or MAX,
use the appropriate value specified under recommended operating conditions.
‡ All typical values are at VCC = 5 V and TA = 25°C.
§ Not more than one output should be shorted at a time, and duration of the short circuit should not exceed one second.
SN55116, SN75116, SN75117, SN75118, SN75119
DIFFERENTIAL LINE TRANSCEIVERS
driver section
SLLS073D – MAY 1976 – REVISED MAY 1998
6
electrical characteristics over recommended operating free-air temperature range (unless otherwise noted)
SN55116, SN75116, SN75117, SN75118, SN75119
DIFFERENTIAL LINE TRANSCEIVERS
SLLS073D – MAY 1976 – REVISED MAY 1998
switching characteristics, VCC = 5 V, CL = 30 pF, TA = 25°C
driver section
PARAMETER
TEST CONDITIONS
TYP
MAX
14
30
12
30
See Figure 14
8
20
ns
See Figure 15
17
40
ns
RL = 180 Ω,
See Figure 14
16
30
ns
RL = 250 Ω,
See Figure 15
20
35
ns
tPLH
tPHL
Propagation-delay time, low-to-high level output
tPZH
tPZL
Output-enable time to high level
RL = 180 Ω,
Output-enable time to low level
RL = 250 Ω,
tPHZ
tPLZ
Output-disable time from high level
Output-disable time from low level
Propagation-delay time, high-to-low level output
POST OFFICE BOX 655303
See Figure 13
• DALLAS, TEXAS 75265
MIN
UNIT
ns
7
TEST CONDITIONS†
PARAMETER
VIT +
VIT –
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
VI
VOH
VOL
II(rec)
( )
II
Positive going threshold voltage§
Positive-going
Negative going threshold voltage§
Negative-going
VO = 0.4 V,
See Note 3
VO = 2.4 V,
See Note 3
Input voltage
g range
g #
VCC = 5 V,
High level output voltage
High-level
IOH = – 5 mA,
See Note 3
IOL = 15 mA,
See Note 3
Low level output voltage
Low-level
VCC = MAX,
MAX
See Note 3
Receiver input current
IInputt currentt att maximum
i
in
ut voltage
input
Strobe
VCC = MIN,
Vstrobe = 4.5 V
IOL = 15 mA,
’116, SN75118
MIN TYP‡
MAX
SN75117, SN75119
MIN TYP‡
MAX
05
0.5
05
0.5
VCC = MIN, VICR = 0,
See Note 4
V
VCC = 5 V, VICR = MAX,
See Note 5
VCC = MIN, VICR = 0,
See Note 4
1
1
– 0.5¶
– 0.5¶
VCC = 5 V, VICR = MAX,
See Note 5
– 1¶
– 1¶
VID = – 1 V or 1 V,
See Note 3
15
to
– 15
6
to
0
VCC = MIN,
VICR = 0,
VID = – 0.5 V,
See Notes 4 and 6
24
2.4
24
2.4
VCC = 5 V,
VICR = MAX,
VID = – 1 V,
See Note 5
24
2.4
24
2.4
VCC = MIN,
VICR = 0,
VID = 0.5 V,
See Notes 4 and 7
04
0.4
04
0.4
VCC = 5 V,
VICR = MAX,
VID = 1 V,
See Note 5
04
0.4
04
0.4
VI = 0,
VI = 0.4 V,
Other input at 0 V
– 0.5
– 0.9
– 0.5
–1
Other input at 2.4 V
– 0.4
– 0.7
– 0.4
– 0.8
VI = 2.4 V,
VID = – 0.5 V,
Other input at 0.4 V
0.1
0.3
0.1
0.4
IOL = – 5 mA,
’116 SN75117
’116,
UNIT
V
V
V
V
5
5
mA
µA
Enable VCC = MAX,
VI = 5.5 V
SN75118, SN75119
1
1
mA
† Unless otherwise noted, Vstrobe = 2.4 V. All parameters, with the exception of off-state open-collector output current, are measured with the active pullup connected to the sink output.
For conditions shown as MIN or MAX, use the appropriate value specified under recommended operating conditions.
‡ All typical values are at VCC = 5 V, TA = 25°C, and VIC = 0.
§ Differential voltages are at the B input terminal with respect to the A input terminal. Neither receiver input of the SN75117 or SN75119 should be taken negative with respect to GND.
¶ The algebraic convention, where the less positive (more negative) limit is designated as minimum, is used in this data sheet for threshold voltages only.
# Input voltage range is the voltage range that, if exceeded at either input, will cause the receiver to cease functioning properly.
NOTES: 3. Measurement of these characteristics on the SN75117 and SN75119 requires the driver to be disabled with the driver enable at 0.8 V.
4. This applies with the less positive receiver input grounded.
5. For ’116 and SN75118, this applies with the more positive receiver input at 15 V or the more negative receiver input at – 15 V. For SN75117 and SN75119, this applies
with the more positive receiver input at 6 V.
6. For SN55116, VID = – 1 V
7. For SN55116, VID = 1 V
SN55116, SN75116, SN75117, SN75118, SN75119
DIFFERENTIAL LINE TRANSCEIVERS
receiver section
SLLS073D – MAY 1976 – REVISED MAY 1998
8
electrical characteristics over recommended operating free-air temperature range (unless otherwise noted)
receiver section (continued)
TEST CONDITIONS†
PARAMETER
IIH
High-level input current
II
Low-level input current
I(RTC)
IO(off)
( )
RT
SN75117, SN75119
MIN TYP‡
MAX
40
40
Enable
VCC = MAX,
VI = 2.4 V
SN75118, SN75119
Strobe
VCC = MAX,,
Vstrobe = 0.4 V,
VID = 0.5 V,,
See Notes 4 and 7
’116 SN75117
’116,
– 2.4
24
– 2.4
24
Enable
VCC = MAX,
VI = 0.4 V
SN75118, SN75119
– 1.6
– 1.6
Response time control current (RTC)
Response-time-control
VCC = MAX,,
RC at 0 V,
VID = 0.5 V,,
See Notes 4 and 7
TA = 25°C
TA = 25°C
Off-state open-collector output current
VCC = MAX,
VO = 12 V,
VID = – 1 V
VCC = MAX,
VO = 0 to VCC,
RE at 0.4 V
TA = 25°C
Off-state
Off
t t (hi
(high-impedance-state)
hi
d
t t )
out
ut current
output
TA = MAX
TA = MAX
Line-terminating resistance
VCC = 5 V
IOS
Sh t i it output
Short-circuit
t t currentt§
VCC = MAX,,
VID = – 0.5 V,
ICC
Short current ((driver and
receiver combined)
VCC = MAX,,
VID = 0.5 V,,
See Notes 4 and 7
VO = 0,,
See Notes 4 and 6
– 1.2
12
µA
mA
mA
1
SN55116
10
µA
200
SN75116, SN75118
20
SN75118, SN75119
± 10
SN75118
± 20
± 10
µA
± 20
SN75119
TA = 25°C
77
167
TA = 25°C
– 15
– 80
TA = 25°C
UNIT
42
60
Ω
– 15
42
– 80
mA
60
mA
† Unless otherwise noted, Vstrobe = 2.4 V. All parameters, with the exception of off-state open-collector output current, are measured with the active pullup connected to the sink output.
For conditions shown as MIN or MAX, use the appropriate value specified under recommended operating conditions.
‡ All typical values are at VCC = 5 V, TA = 25°C, and VIC = 0.
§ Not more than one output should be shorted at a time.
NOTES: 4. This applies with the less positive receiver input grounded.
6. For SN55116, VID = – 1 V
7. For SN55116, VID = 1 V
SLLS073D – MAY 1976 – REVISED MAY 1998
9
SN55116, SN75116, SN75117, SN75118, SN75119
DIFFERENTIAL LINE TRANSCEIVERS
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
IOZ
’116, SN75118
MIN TYP‡
MAX
SN55116, SN75116, SN75117, SN75118, SN75119
DIFFERENTIAL LINE TRANSCEIVERS
SLLS073D – MAY 1976 – REVISED MAY 1998
switching characteristics, VCC = 5 V, CL = 30 pF, TA = 25°C
receiver section
PARAMETER
TEST CONDITIONS
tPLH
tPHL
Propagation-delay time, low-to-high-level output
tPZH
tPZL
Output-enable time to high level
tPHZ
tPLZ
Output-disable time from high level
Propagation-delay time, high-to-low-level output
Output-enable time to low level
Output-disable time from low level
SN75118
and
SN75119
only
l
MIN
TYP
MAX
20
75
UNIT
ns
17
75
ns
RL = 400 Ω
Ω,
See Figure 16
RL = 480 Ω,
See Figure 14
9
20
ns
RL = 250 Ω,
See Figure 15
16
35
ns
RL = 480 Ω,
See Figure 14
12
30
ns
RL = 250 Ω,
See Figure 15
17
35
ns
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
11
SN55116, SN75116, SN75117, SN75118, SN75119
DIFFERENTIAL LINE TRANSCEIVERS
SLLS073D – MAY 1976 – REVISED MAY 1998
TYPICAL CHARACTERISTICS†
DRIVER
DRIVER
OUTPUT VOLTAGE
vs
INPUT VOLTAGE
OUTPUT VOLTAGE
vs
INPUT VOLTAGE
ÁÁÁÁ
ÁÁÁÁ ÎÎÎÎÎ
ÎÎÎÎ
ÎÎÎÎÎ
ÎÎÎÎÎ
ÎÎÎÎ
ÎÎÎÎÎ
6
6
No Load
TA = 25°C
ÁÁ
ÁÁ
VCC = 5 V
No Load
5
VCC = 5.5 V
4
VO
VO – Output Voltage – V
VO
VO – Output Voltage – V
5
VCC = 5 V
VCC = 4.5 V
3
ÎÎÎÎÎ
ÁÁÁÁÁ
ÁÁÁÁÁ
ÎÎÎÎÎ
4
ÎÎÎÎÎÎ
ÎÎÎÎÎÎ
ÎÎÎÎÎ
ÎÎÎÎÎ
ÎÎÎÎÎ
ÎÎÎÎÎ
3
TA = – 55°C
ÁÁÁ
ÁÁÁ
2
2
TA = 25°C
1
1
TA = 125°C
0
0
0
1
3
2
0
4
1
VI – Input Voltage – V
2
Figure 2
DRIVER
DRIVER
HIGH-LEVEL OUTPUT VOLTAGE
vs
HIGH-LEVEL OUTPUT CURRENT
LOW-LEVEL OUTPUT VOLTAGE
vs
LOW-LEVEL OUTPUT CURRENT
VOL
VOL – Low-Level Output Voltage – V
TA = 25°C
VVOH
OH – High-Level Output Voltage – V
ÎÎÎÎ
ÎÎÎÎ
0.6
6
5
ÎÎÎÎÎ
ÎÎÎÎ
ÎÎÎÎÎ
ÎÎÎÎ
VCC = 5.5 V
4
VCC = 5 V
3
VCC = 4.5 V
2
4
VI – Input Voltage – V
Figure 1
ÁÁ
ÁÁ
3
ÁÁ
ÁÁ
1
TA = 25°C
0.5
ÎÎÎÎÎ
ÎÎÎÎ
ÎÎÎÎ
VCC = 4.5 V
0.4
0.3
VCC = 5.5 V
0.2
0.1
0
0
0
– 20
– 40
– 60
– 80
– 100
0
20
40
50
80
100
120
IOL – Low-Level Output Current – mA
IOH – High-Level Output Current – mA
Figure 3
Figure 4
† Operation of the device at these or any other conditions beyond those indicated under ‘‘recommended operating conditions” is not implied.
12
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
SN55116, SN75116, SN75117, SN75118, SN75119
DIFFERENTIAL LINE TRANSCEIVERS
SLLS073D – MAY 1976 – REVISED MAY 1998
TYPICAL CHARACTERISTICS†
t pd – Propagation Delay Time – ns
18
16
14
12
10
DRIVER
OUTPUT-ENABLE AND DISABLE TIME
vs
FREE-AIR TEMPERATURE
ÁÁÁÁ
ÎÎÎÎ
ÁÁÁÁ
ÎÎÎÎ
ÁÁÁÁ
ÎÎÎ
ÁÁÁÁ
ÎÎÎ
ÎÎÎ
ÁÁÁÁÁ
ÎÎÎÎ
ÁÁÁÁÁ
ÎÎÎÎ
ÁÁÁÁÁ
ÎÎÎ
ÎÎÎ
ÎÎÎ
30
VCC = 5 V
CL = 30 pF
See Figure 13
Output Enable and Disable Time – ns
20
DRIVER
PROPAGATION-DELAY TIME
vs
FREE-AIR TEMPERATURE
tPLH
tPHL
8
6
4
VCC = 5 V
See Note A
25
tPLZ
ÎÎÎ
ÎÎÎ
ÎÎÎ
ÎÎÎ
20
tPZL
tPHZ
15
10
tPZH
5
2
0
–75 – 50
0
– 25
25
50
75
100
0
–75 – 50
125
Figure 5
100
RECEIVER
RECEIVER
OUTPUT VOLTAGE
vs
DIFFERENTIAL INPUT VOLTAGE
ÎÎÎÎ ÁÁÁÁÁÁÁ
ÁÁÁÁÁÁÁ
ÎÎÎÎ ÁÁÁÁÁÁÁ
VCC = 5.5 V
Load = 2 kΩ to VCC
TA = 25°C
125
VCC = 4.5 V
3
ÁÁÁ
ÁÁÁ
2
1
ÁÁÁÁÁÁ
ÎÎÎÎÎÎ
ÎÎÎÎÎÎÎ
ÁÁÁÁÁÁ
ÎÎÎÎÎÎÎ
ÁÁÁÁÁÁ
ÎÎÎÎ
ÎÎÎÎ
ÎÎÎÎ
ÁÁ ÎÎÎÎ
ÎÎÎÎ
ÁÁ ÎÎÎÎ
6
VCC = 5 V
Load = 2 kΩ to VCC
5
VO
VO – Output Voltage – V
VO – Output Voltage – V
VO
75
Figure 6
4
0
– 0.2
50
OUTPUT VOLTAGE
vs
DIFFERENTIAL INPUT VOLTAGE
VCC = 5 V
5
25
TA – Free-Air Temperature – °C
NOTE A: For tPZH and tPHZ: RL = 480 Ω, see Figure 14. For tPZL
and tPLZ: RL = 250 Ω, see Figure 15.
TA – Free-Air Temperature – °C
6
0
– 25
4
TA = 125°C
3
TA = 25°C
2
TA = – 55°C
1
– 0.1
0
0.1
0.2
0
– 0.2
– 0.1
0
0.1
0.2
VID – Differential Input Voltage – V
VID – Differential Input Voltage – V
Figure 7
Figure 8
† Operation of the device at these or any other conditions beyond those indicated under ‘‘recommended operating conditions” is not implied.
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
13
SN55116, SN75116, SN75117, SN75118, SN75119
DIFFERENTIAL LINE TRANSCEIVERS
SLLS073D – MAY 1976 – REVISED MAY 1998
TYPICAL CHARACTERISTICS†
RECEIVER
RECEIVER
OUTPUT-ENABLE AND DISABLE TIME
vs
FREE-AIR TEMPERATURE
PROPAGATION-DELAY TIME
vs
FREE-AIR TEMPERATURE
25
ÎÎÎÎ
ÁÁÁÁÁ
ÎÎÎÎÎ
ÁÁÁÁÁ
ÎÎÎÎÎ
ÁÁÁÁÁÎÎÎ
ÎÎÎ
ÎÎ
ÎÎ
30
VCC = 5 V
RL = 400 Ω
See Figure 16
Output Enable and Disable Time – ns
t pd – Propagation Delay Time – ns
30
tPLH
20
15
tPHL
10
5
0
–75
– 50
0
25
50
75
100
– 25
TA – Free-Air Temperature – °C
ÁÁÁÁ
ÎÎÎÎ
ÁÁÁÁ
ÎÎÎÎ
ÁÁÁÁ
VCC = 5 V
See Note A
25
20
15
tPHZ
10
tPZH
5
0
–75 – 50
0
25
50
75
100 125
– 25
TA – Free-Air Temperature – °C
NOTE A: For tPZH and tPHZ :RL= 480 Ω, see Figure 14. For tPZL
and tPLZ: RL = 250 Ω, see Figure 15.
125
ÁÁ
ÁÁ
60
Figure 10
DRIVER AND RECEIVER
DRIVER AND RECEIVER
SUPPLY CURRENT
vs
SUPPLY VOLTAGE
SUPPLY CURRENT
vs
FREE-AIR TEMPERATURE
ÎÎÎÎÎ
ÁÁÁÁ
ÎÎÎÎ
ÁÁÁÁ
ÎÎÎÎÎ
ÎÎÎÎ
50
No Load
TA = 25°C
VCC = 5 V
45
40
IICC
CC – Supply Current – mA
IICC
CC – Supply Current – mA
70
tPLZ
tPZL
Figure 9
80
ÎÎÎ
ÎÎÎ
ÎÎÎ
ÎÎÎ
ÎÎÎ
ÎÎÎ
50
40
ÁÁ
ÁÁ
30
20
10
35
30
25
20
15
10
5
0
0
1
2
3
4
5
6
VCC – Supply Voltage – V
7
8
0
–75 – 50
Figure 11
0
25
50
75
100
– 25
TA – Free-Air Temperature – °C
125
Figure 12
† Operation of the device at these or any other conditions beyond those indicated under ‘‘recommended operating conditions” is not implied.
14
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
SN55116, SN75116, SN75117, SN75118, SN75119
DIFFERENTIAL LINE TRANSCEIVERS
SLLS073D – MAY 1976 – REVISED MAY 1998
PARAMETER MEASUREMENT INFORMATION
From Output
Under Test
Test
Point
CL = 30 pF
(see Note A)
≤ 5 ns
90%
1.5 V
Input
≤ 5 ns
3V
90%
1.5 V
10%
10%
Input
0V
tPHL
NAND
Output
RL = 180 Ω
LOAD CIRCUIT
LOAD CIRCUIT
≤ 5 ns
Test
Point
From Output
Under Test
CL = 30 pF
(see Note A)
tPLH
10%
VOH
10%
VOH
Output
tPHL
1.5 V
VOH
AND
Output
1.5 V
VOL
VOLTAGE WAVEFORMS
VOLTAGE WAVEFORMS
tPLH and tPHL (drivers only)
tPZH and tPHZ
Figure 13
Figure 14
5V
From Output
Under Test
90%
1.5 V
See Note B
LOAD CIRCUIT
≤ 5 ns
90%
1.5 V
3V
10%
0V
tPZL
tPLZ
Output
RL = 400 Ω
CL = 30 pF
(see Note A)
LOAD CIRCUIT
Input
10%
5V
Test
Point
RL = 250 Ω
Test
Point
CL = 30 pF
(see Note A)
≤ 5 ns
0.5 V
Voff = 0 V
tPHZ
1.5 V
From Output
Under Test
0V
tPZH
VOL
tPLH
3V
90%
1.5 V
90%
1.5 V
1.5 V
1.5 V
≤ 5 ns
1.5 V
≤ 5 ns
B Input
(see Note C)
10%
≤ 5 ns
VH
90%
50%
90%
50%
10%
tPHL
V =5V
0.5 V off
Output
1.5 V
See Note C
VL
tPLH
VOH
1.5 V
VOL
VOL
VOLTAGE WAVEFORMS
VOLTAGE WAVEFORMS
tPZL and tPLZ
(SN75118 and SN75119 receivers only)
tPLH and tPHL (receivers only)
Figure 16
Figure 15
NOTES: A. CL includes probe and jig capacitance.
B. All diodes are 1N3064 or equivalent.
C. For ’116 and SN75118, VH = 3 V, VL = – 3 V, the A input is at 0 V.
For SN75117 and SN75119, VH = 3 V, VL = 0, the A input is at 1.5 V.
D. When testing the ’116 and SN75118 receiver sections, the response-time control and the termination resistor pins are left open.
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
15
IMPORTANT NOTICE
Texas Instruments and its subsidiaries (TI) reserve the right to make changes to their products or to discontinue
any product or service without notice, and advise customers to obtain the latest version of relevant information
to verify, before placing orders, that information being relied on is current and complete. All products are sold
subject to the terms and conditions of sale supplied at the time of order acknowledgement, including those
pertaining to warranty, patent infringement, and limitation of liability.
TI warrants performance of its semiconductor products to the specifications applicable at the time of sale in
accordance with TI’s standard warranty. Testing and other quality control techniques are utilized to the extent
TI deems necessary to support this warranty. Specific testing of all parameters of each device is not necessarily
performed, except those mandated by government requirements.
CERTAIN APPLICATIONS USING SEMICONDUCTOR PRODUCTS MAY INVOLVE POTENTIAL RISKS OF
DEATH, PERSONAL INJURY, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE (“CRITICAL
APPLICATIONS”). TI SEMICONDUCTOR PRODUCTS ARE NOT DESIGNED, AUTHORIZED, OR
WARRANTED TO BE SUITABLE FOR USE IN LIFE-SUPPORT DEVICES OR SYSTEMS OR OTHER
CRITICAL APPLICATIONS. INCLUSION OF TI PRODUCTS IN SUCH APPLICATIONS IS UNDERSTOOD TO
BE FULLY AT THE CUSTOMER’S RISK.
In order to minimize risks associated with the customer’s applications, adequate design and operating
safeguards must be provided by the customer to minimize inherent or procedural hazards.
TI assumes no liability for applications assistance or customer product design. TI does not warrant or represent
that any license, either express or implied, is granted under any patent right, copyright, mask work right, or other
intellectual property right of TI covering or relating to any combination, machine, or process in which such
semiconductor products or services might be or are used. TI’s publication of information regarding any third
party’s products or services does not constitute TI’s approval, warranty or endorsement thereof.
Copyright  1998, Texas Instruments Incorporated