SLOS250G − JUNE 1999 − REVISED JANUARY 2005 D Wide Range of Supply Voltages, Single D D D D D DBV PACKAGE (TOP VIEW) Supply 3 V to 30 V, or Dual Supplies Class AB Output Stage True Differential-Input Stage Low Input Bias Current Internal Frequency Compensation Short-Circuit Protection IN+ VCC−/GND IN− 1 5 VCC+ 4 OUT 2 3 description/ordering information The TL343 is a single operational amplifier similar in performance to the µA741, but with several distinct advantages. It is designed to operate from a single supply over a range of voltages from 3 V to 30 V. Operation from split supplies also is possible, provided the difference between the two supplies is 3 V to 30 V. The common-mode input range includes the negative supply. Output range is from the negative supply to VCC − 1.5 V. ORDERING INFORMATION TA VIOMAX AT 25°C −40°C to 125°C 10 mV ORDERABLE PART NUMBER PACKAGE† SOT-23-5 (DBV) Reel of 3000 TL343IDBVR Reel of 250 TL343IDBVT TOP-SIDE MARKING‡ T4I_ † Package drawings, standard packing quantities, thermal data, symbolization, and PCB design guidelines are available at www.ti.com/sc/package. ‡ The actual top-side marking has one additional character that designates the assembly/test site. symbol − IN− + IN+ OUT Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet. Copyright 2005, Texas Instruments Incorporated ! "#$ %!& % "! "! '! ! !( ! %% )*& % "!+ %! !!$* $%! !+ $$ "!!& POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 1 SLOS250G − JUNE 1999 − REVISED JANUARY 2005 schematic VCC+ 5 pF IN+ OUT IN− 2.4 kΩ VCC−/GND NOTE A: Component values shown are nominal. absolute maximum ratings over operating free-air temperature range (unless otherwise noted) MAX VCC+ VCC− Supply voltage (see Note 1) Supply voltage, VCC+ with respect to VCC− UNIT 18 −18 V 36 V Differential input voltage (see Note 2) ±36 V Input voltage (see Notes 1 and 3) ±18 V Package thermal impedance, θJA (see Notes 4 and 5) 206 °C/W 150 °C −65 to 150 °C Operating virtual junction temperature, TJ Storage temperature range, Tstg NOTES: 1. 2. 3. 4. These voltage values are with respect to the midpoint between VCC+ and VCC−. Differential voltages are at IN+ with respect to IN−. Neither input must ever be more positive than VCC+ or more negative than VCC−. Maximum power dissipation is a function of TJ(max), θJA, and TA. The maximum allowable power dissipation at any allowable ambient temperature is PD = (TJ(max) − TA)/θJA. Selecting the maximum of 150°C can affect reliability. 5. The package thermal impedance is calculated in accordance with JESD 51-7. 2 POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 SLOS250G − JUNE 1999 − REVISED JANUARY 2005 recommended operating conditions VCC VCC+ VCC− TA Single-supply voltage Dual-supply voltage Operating free-air temperature MIN MAX 3 30 1.5 15 −1.5 −15 −40 125 UNIT V V °C electrical characteristics at specified free-air temperature, VCC± = ±15 V (unless otherwise noted) TEST CONDITIONS† PARAMETER MIN 25°C VIO Input offset voltage See Note 6 aV Temperature coefficient of input offset voltage See Note 6 IIO Input offset current See Note 6 aI Temperature coefficient of input offset current See Note 6 IIB Input bias current See Note 6 VICR Common-mode input voltage range‡ VOM Peak output-voltage swing IO IO 12 Full range 10 25°C 30 −200 VCC− to 13 VCC− to 13.5 25°C ±12 ±13.5 25°C ±10 ±13 Full range ±10 25°C 20 Full range 15 AVD Large-signal differential voltage amplification VO = ±10 V, RL = 2 kΩ BOM Maximum-output-swing bandwidth VOPP = 20 V, THD ≤ 5%, AVD = 1, RL = 2 kΩ 25°C B1 φm Unity-gain bandwidth VO = 50 mV, CL = 200 pF, RL = 10 kΩ Phase margin RL = 2 kΩ ri Input resistance f = 20 Hz 25°C ro Output resistance f = 20 Hz 25°C CMRR Common-mode rejection ratio 25°C kSVS Supply-voltage sensitivity (∆VIO/∆VCC) Short-circuit output current§ VIC = VICR(min) VCC± = ±2.5 to ±15 V −500 nA V V 200 V/mV 9 kHz 25°C 1 MHz 25°C 44 Deg 1 MΩ 0.3 75 Ω 70 90 dB 30 150 µV/V ±10 ±30 ±55 mA 0.7 2.8 25°C 25°C mA † All characteristics are measured under open-loop conditions, with zero common-mode voltage, unless otherwise specified. Full range for TA is −40°C to 125°C. ‡ The VICR limits are linked directly, volt-for-volt, to supply voltage; the positive limit is 2 V less than VCC+. § Temperature and/or supply voltages must be limited to ensure that the dissipation rating is not exceeded. NOTE 6: VIO, IIO, IIB, and ICC are defined at VO = 0. POST OFFICE BOX 655303 See Note 6 nA pA/°C −800 25°C mV 50 50 Full range UNIT µV/°C 200 Full range RL = 2 kΩ No load, 10 Full range RL = 10 kΩ Total supply current MAX 2 Full range 25°C IOS ICC TYP • DALLAS, TEXAS 75265 25°C 3 SLOS250G − JUNE 1999 − REVISED JANUARY 2005 electrical characteristics, VCC+ = 3 V and 5 V, VCC− = 0 V, TA = 25°C (unless otherwise noted) TEST CONDITIONS† PARAMETER VIO IIO Input offset voltage IIB VOM Input bias current MIN VO = 1.5 V and 2.5 V VO = 1.5 V and 2.5 V Input offset current Peak output voltage swing‡ VO = 1.5 V and 2.5 V RL = 10 kΩ AVD Large-signal differential voltage amplification VO = 1.7 V to 3.3 V, kSVS Supply-voltage sensitivity (∆VIO/∆VCC±) RL = 2 kΩ TYP MAX UNIT 2 10 mV 30 50 nA −200 −500 nA 3.3 3.5 V 20 200 V/mV VCC± = ±2.5 V to ±15 V VO = 1.5 V and 2.5 V, 150 ICC Supply current No load 0.7 1.75 † All characteristics are measured under open-loop conditions, with zero common-mode input voltage, unless otherwise specified. ‡ Output swings essentially to ground. µV/V mA operating characteristics, VCC± = ±15 V, TA = 25°C, AVD = 1 (unless otherwise noted) PARAMETER TYP UNIT VI = ±10 V, ∆VO = 50 mV, CL = 100 pF, RL = 2 kΩ, See Figure 1 1 V/µs CL = 100 pF, RL = 10 kΩ, See Figure 1 0.35 µs CL = 100 pF, RL = 10 kΩ, See Figure 1 0.35 µs Overshoot factor ∆VO = 50 mV, ∆VO = 50 mV, CL = 100 pF, RL = 10 kΩ, See Figure 1 20% Crossover distortion VI(PP) = 30 mV, VOPP = 2 V, f = 10 kHZ SR Slew rate at unity gain tr tf Rise time Fall time TEST CONDITIONS PARAMETER MEASUREMENT INFORMATION + − VI OUT CL = 100 pF RL Figure 1. Unity-Gain Amplifier 4 POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 1% SLOS250G − JUNE 1999 − REVISED JANUARY 2005 TYPICAL CHARACTERISTICS† INPUT BIAS CURRENT vs FREE-AIR TEMPERATURE 250 VCC± = ±15 V TA = 25°C 200 I IB − Input Bias Current − nA I IB − Input Bias Current − nA 250 INPUT BIAS CURRENT vs SUPPLY VOLTAGE 150 100 50 0 −75 −50 −25 0 25 50 75 100 200 150 100 50 0 125 0 2 TA − Free-Air Temperature − °C RL = 10 kΩ TA = 25°C 25 20 15 10 5 4 6 8 10 12 14 16 MAXIMUM PEAK-TO-PEAK OUTPUT VOLTAGE vs FREQUENCY VOPP − Maximum Peak-to-Peak Output Voltage − V VOPP − Maximum Peak-to-Peak Output Voltage − V 30 2 8 Figure 3 MAXIMUM PEAK-TO-PEAK OUTPUT VOLTAGE vs SUPPLY VOLTAGE 0 6 |VCC±| − Supply Voltage − V Figure 2 0 4 10 12 14 16 ÎÎÎÎÎ ÎÎÎÎÎ ÎÎÎÎÎ ÎÎÎÎÎ ÎÎÎÎÎ 30 VCC± = ±15 V CL = 0 RL = 10 kΩ TA = 25°C See Figure 1 25 20 15 10 5 0 1k |VCC±| − Supply Voltage − V 10 k 100 k 1M f − Frequency − Hz Figure 4 Figure 5 † Operation of the device at these or any other conditions beyond those indicated under “recommended operating conditions” is not implied. POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 5 SLOS250G − JUNE 1999 − REVISED JANUARY 2005 106 LARGE-SIGNAL DIFFERENTIAL VOLTAGE AMPLIFICATION vs FREQUENCY ÎÎÎÎÎ ÎÎÎÎÎ ÎÎÎÎÎ VOLTAGE-FOLLOWER LARGE-SIGNAL PULSE RESPONSE VCC± = ±15 V RL = 2 kΩ TA = 25°C 105 104 103 102 ÎÎÎÎÎ ÎÎÎÎÎ ÎÎÎÎÎ VCC± = ±15 V RL = 2 kΩ TA = 25°C See Figure 1 10 Input/Output Voltages − V A VD − Large-Signal Differential Voltage Amplification − dB TYPICAL CHARACTERISTICS† Output 5 0 −5 10 Input −10 1 1 10 100 1k 10 k 100 k 1M 0 10 20 30 40 50 60 70 80 90 t − Time − µs f − Frequency − Hz Figure 7 Figure 6 † Operation of the device at these or any other conditions beyond those indicated under “recommended operating conditions” is not implied. 6 POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 PACKAGE OPTION ADDENDUM www.ti.com 18-Jul-2006 PACKAGING INFORMATION Orderable Device Status (1) Package Type Package Drawing Pins Package Eco Plan (2) Qty TL343IDBVR ACTIVE SOT-23 DBV 5 3000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TL343IDBVRE4 ACTIVE SOT-23 DBV 5 3000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TL343IDBVT ACTIVE SOT-23 DBV 5 250 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TL343IDBVTE4 ACTIVE SOT-23 DBV 5 250 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM Lead/Ball Finish MSL Peak Temp (3) (1) The marketing status values are defined as follows: ACTIVE: Product device recommended for new designs. LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect. NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in a new design. PREVIEW: Device has been announced but is not in production. Samples may or may not be available. OBSOLETE: TI has discontinued the production of the device. (2) Eco Plan - The planned eco-friendly classification: Pb-Free (RoHS), Pb-Free (RoHS Exempt), or Green (RoHS & no Sb/Br) - please check http://www.ti.com/productcontent for the latest availability information and additional product content details. TBD: The Pb-Free/Green conversion plan has not been defined. Pb-Free (RoHS): TI's terms "Lead-Free" or "Pb-Free" mean semiconductor products that are compatible with the current RoHS requirements for all 6 substances, including the requirement that lead not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered at high temperatures, TI Pb-Free products are suitable for use in specified lead-free processes. Pb-Free (RoHS Exempt): This component has a RoHS exemption for either 1) lead-based flip-chip solder bumps used between the die and package, or 2) lead-based die adhesive used between the die and leadframe. The component is otherwise considered Pb-Free (RoHS compatible) as defined above. Green (RoHS & no Sb/Br): TI defines "Green" to mean Pb-Free (RoHS compatible), and free of Bromine (Br) and Antimony (Sb) based flame retardants (Br or Sb do not exceed 0.1% by weight in homogeneous material) (3) MSL, Peak Temp. -- The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications, and peak solder temperature. Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is provided. TI bases its knowledge and belief on information provided by third parties, and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. TI has taken and continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals. TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release. In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s) at issue in this document sold by TI to Customer on an annual basis. Addendum-Page 1 IMPORTANT NOTICE Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, modifications, enhancements, improvements, and other changes to its products and services at any time and to discontinue any product or service without notice. Customers should obtain the latest relevant information before placing orders and should verify that such information is current and complete. All products are sold subject to TI’s terms and conditions of sale supplied at the time of order acknowledgment. TI warrants performance of its hardware products to the specifications applicable at the time of sale in accordance with TI’s standard warranty. Testing and other quality control techniques are used to the extent TI deems necessary to support this warranty. Except where mandated by government requirements, testing of all parameters of each product is not necessarily performed. TI assumes no liability for applications assistance or customer product design. Customers are responsible for their products and applications using TI components. To minimize the risks associated with customer products and applications, customers should provide adequate design and operating safeguards. TI does not warrant or represent that any license, either express or implied, is granted under any TI patent right, copyright, mask work right, or other TI intellectual property right relating to any combination, machine, or process in which TI products or services are used. Information published by TI regarding third-party products or services does not constitute a license from TI to use such products or services or a warranty or endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual property of the third party, or a license from TI under the patents or other intellectual property of TI. Reproduction of information in TI data books or data sheets is permissible only if reproduction is without alteration and is accompanied by all associated warranties, conditions, limitations, and notices. Reproduction of this information with alteration is an unfair and deceptive business practice. TI is not responsible or liable for such altered documentation. Resale of TI products or services with statements different from or beyond the parameters stated by TI for that product or service voids all express and any implied warranties for the associated TI product or service and is an unfair and deceptive business practice. TI is not responsible or liable for any such statements. Following are URLs where you can obtain information on other Texas Instruments products and application solutions: Products Applications Amplifiers amplifier.ti.com Audio www.ti.com/audio Data Converters dataconverter.ti.com Automotive www.ti.com/automotive DSP dsp.ti.com Broadband www.ti.com/broadband Interface interface.ti.com Digital Control www.ti.com/digitalcontrol Logic logic.ti.com Military www.ti.com/military Power Mgmt power.ti.com Optical Networking www.ti.com/opticalnetwork Microcontrollers microcontroller.ti.com Security www.ti.com/security Low Power Wireless www.ti.com/lpw Mailing Address: Telephony www.ti.com/telephony Video & Imaging www.ti.com/video Wireless www.ti.com/wireless Texas Instruments Post Office Box 655303 Dallas, Texas 75265 Copyright 2006, Texas Instruments Incorporated