LP1500 1W POWER PHEMT • • FEATURES ♦ 31.5 dBm Output Power at 1-dB Compression at 18 GHz ♦ 8 dB Power Gain at 18 GHz ♦ 28 dBm Output Power at 1-dB Compression at 3.3V ♦ 45dBm Output IP3 at 18GHz ♦ 50% Power-Added Efficiency DRAIN BOND PAD (2X) SOURCE BOND PAD (2x) GATE BOND PAD (2X) DIE SIZE: 16.5X16.1 mils (420x410 µm) DIE THICKNESS: 3 mils (75 µm) BONDING PADS: 1.9X2.4 mils (50x60 µm) DESCRIPTION AND APPLICATIONS The LP1500 is an Aluminum Gallium Arsenide / Indium Gallium Arsenide (AlGaAs/InGaAs) Pseudomorphic High Electron Mobility Transistor (PHEMT), utilizing an Electron-Beam directwrite 0.25 µm by 1500 µm Schottky barrier gate. The recessed “mushroom” gate structure minimizes parasitic gate-source and gate resistances. The epitaxial structure and processing have been optimized for reliable high-power applications. The LP1500 also features Si3 N4 passivation and is available in a P100 flanged ceramic package and in the low cost plastic SOT89 package. Typical applications include commercial and other narrowband and broadband high-performance amplifiers, including SATCOM uplink transmitters, PCS/Cellular low-voltage high-efficiency output amplifiers, and medium-haul digital radio transmitters. • ELECTRICAL SPECIFICATIONS @ TAmbient = 25°°C Parameter Symbol Test Conditions Min Typ Max Units Saturated Drain-Source Current IDSS VDS = 2 V; VGS = 0 V 375 490 600 mA Power at 1-dB Compression P-1dB VDS = 8 V; IDS = 50% IDSS 30 31.5 dBm Power Gain at 1-dB Compression G-1dB VDS = 8 V; IDS = 50% IDSS 6 8 dB Output Third Intercept Point IP3 VDS = 8 V; IDS = 50% IDSS 45 dBm Power-Added Efficiency PAE VDS = 8 V; IDS = 50% IDSS 50 % Maximum Drain-Source Current IMAX VDS = 2 V; VGS = 1 V 925 mA Transconductance GM VDS = 2 V; VGS = 0 V 450 mS Gate-Source Leakage Current IGSO VGS = -5 V Pinch-Off Voltage VP VDS = 2 V; IDS = 5 mA Gate-Source Breakdown Voltage Magnitude |VBDGS| Gate-Drain Breakdown Voltage Magnitude |VBDGD| Thermal Resistivity ΘJC 385 10 75 µA -0.25 -1.2 -2.0 V IGS = 8 mA -12 -15 V IGD = 8 mA -12 -16 V 45 °C/W frequency=18 GHz Phone: (408) 988-1845 Fax: (408) 970-9950 http:// www.filss.com Revised: 1/18/01 Email: [email protected] LP1500 1W POWER PHEMT • ABSOLUTE MAXIMUM RATINGS Notes: • • • Parameter Symbol Test Conditions Drain-Source Voltage VDS Gate-Source Voltage Min Max Units TAmbient = 22 ± 3 °C 12 V VGS TAmbient = 22 ± 3 °C -5 V Drain-Source Current IDS TAmbient = 22 ± 3 °C 2xIDSS mA Gate Current IG TAmbient = 22 ± 3 °C 15 mA RF Input Power PIN TAmbient = 22 ± 3 °C 750 mW Channel Operating Temperature TCH TAmbient = 22 ± 3 °C 175 ºC Storage Temperature TSTG — 175 ºC Total Power Dissipation PTOT TAmbient = 22 ± 3 °C 3.33 W -65 Operating conditions that exceed the Absolute Maximum Ratings could result in permanent damage to the device. Power Dissipation defined as: PTOT ≡ (PDC + PIN) – POUT, where PDC: DC Bias Power PIN: RF Input Power POUT: RF Output Power Absolute Maximum Power Dissipation to be de-rated as follows above 25°C: PTOT= 3.33W – (0.022W/°C) x THS where THS = heatsink or ambient temperature. • HANDLING PRECAUTIONS To avoid damage to the devices care should be exercised during handling. Proper Electrostatic Discharge (ESD) precautions should be observed at all stages of storage, handling, assembly, and testing. These devices should be treated as Class 1A (0-500 V). Further information on ESD control measures can be found in MIL-STD-1686 and MIL-HDBK-263. • ASSEMBLY INSTRUCTIONS The recommended die attach is gold/tin eutectic solder under a nitrogen atmosphere. Stage temperature should be 280-290°C; maximum time at temperature is one minute. The recommended wire bond method is thermo-compression wedge bonding with 0.7 or 1.0 mil (0.018 or 0.025 mm) gold wire. Stage temperature should be 250-260°C. • APPLICATIONS NOTES & DESIGN DATA Applications Notes are available from your local Filtronic Sales Representative or directly from the factory. Complete design data, including S-parameters, noise data, and large-signal models are available on the Filtronic web site. All information and specifications are subject to change without notice. Phone: (408) 988-1845 Fax: (408) 970-9950 http:// www.filss.com Revised: 1/18/01 Email: [email protected]