55 Commerce Way Woburn, MA 01801 (781) 935 - 4442 (781) 938 - 5867 www.gilway.com GHB-GW20-YG Features Description ?SUBMINIATURE PACKAGE. The Mega Green source color devices are made ?WIDE VIEWING ANGLE. ?LONG LIFE - SOLID STATE RELIABILITY. SUBMINIATURE SOLID STATE LAMP ?LOW PACKAGE PROFILE. ?PACKAGE : with DH InGaAlP on GaAs substrate Light Emitting Diode. 1000PCS / REEL. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is 0.25(0.01") unless otherwise noted. 3. Lead spacing is measured where the lead emerge package. 4. Specifications are subject to change without notice. REV NO: V.2 DATE: NOV/13/2002 PAGE: 1 OF 4 Selection Guide P Pa a art rt N No. No o.. MEGA GREEN (InGaAIP) GHB-GW20-YG m c dd) v ((mcd) IIv (mc @ 20 mA Lens Typ L e ens nss T Tyy p e Diic ce WATER CLEAR ng ew iin V Viewin Viiiew Angle Miin n. in. T Typ Tyyyp pp.. 280 600 its Un nit t io nss o n d iition T Test e est ss t C Cond 20° Note: 1. 1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. Electrical / Optical Characteristics at TA=25 C S Sy yymbo ymbol mb o l P Pa a aramete r a m e t er ev ic e De evic TTyyyp pp.. peak Peak Wavelength Mega Green 574 nm I F =20mA D Dominate Wavelength Mega Green 568 nm I F =20mA 1/2 Spectral Line Half-width Mega Green 26 nm I F =20mA C Capacitance Mega Green 20 pF V F =0V;f =1MHz VF Forward Voltage Mega Green 2.1 2.5 V I F =20mA IR Reverse Current Mega Green 10 uA V R = 5V xx.. ax Ma Absolute Maximum Ratings at TA=25 C Mega Green its Un nit Power dissipation 105 mW DC Forward Current 30 mA Peak Forward Current [1] 150 mA Reverse Voltage 5 V Operating/Storage Temperature -40 C To +85 C P Pa a arameter r am e t er Note: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. REV NO: V.2 DATE: NOV/13/2002 PAGE: 2 OF 4 REV NO: V.2 DATE: NOV/13/2002 PAGE: 3 OF 4 SMT Reflow Soldering Instructions Number of reflow process shall be less than 2 times and cooling process to normal temperature is required between first and second soldering process. Recommended Soldering Pattern (Units : mm) Tape Specifications (Units : mm) REV NO: V.2 DATE: NOV/13/2002 PAGE: 4 OF 4