1N4001 THRU 1N4007 GENERAL PURPOSE PLASTIC RECTIFIER Reverse Voltage - 50 to 1000 Volts Forward Current - 1.0 Ampere Features The plastic package carries Underwriters Laboratory Flammability Classification 94V-0 Construction utilizes void-free molded plastic technique Low reverse leakage High forward surge current capability High temperature soldering guaranteed: 250 /10 seconds, 0.375 (9.5mm) lead length, 5 lbs. (2.3Kg) tension Mechanical Data DIM ENSIONS Case: DO-41 molded plastic body Terminals: Plated axial leads, solderable per MIL-STD-750, method 2026 Polarity: Color band denotes cathode end Mounting Position: Any Weight: 0.012 ounce, 0.33 gram DIM inches mm Note Min. Max. Min. Max. A 0.165 0.205 4.2 5.2 B 0.079 0.106 2.0 2.7 C 0.028 0.034 0.71 0.86 D 1.000 - 25.40 - 1N4003 1N4004 1N4005 1N4006 1N4007 Units Maximum Ratings and Electrical Characteristics Ratings at 25 ambient temperature unless otherwise specified. Symbols 1N4001 1N4002 Maximum repetitive peak reverse voltage VRRM 50 100 200 400 600 800 1000 Volts Maximum RMS voltage VRMS 35 70 140 280 420 560 700 Volts Maximum DC blocking voltage VDC 50 100 200 400 600 800 1000 Volts Maximum average forward rectified current 0.375" (9.5mm) lead length at TA=75 I(AV) 1.0 Amp Peak forward surge current 8.3mS single half sine-wave superimposed on rated load (MIL-STD-750D 4066 method) TA=75 IFSM 30.0 Amps Maximum instantaneous forward voltage at 1.0A VF 1.1 Volts IR 5.0 50.0 A Maximum DC reverse current at rated DC blocking voltage TA=25 TA=100 Typical reverse recovery time (Note 1) Trr 2.0 S Typical junction capacitance (Note 2) CJ 15.0 ¦ÑF Typical thermal resistance (Note 3) Maximum DC blocking voltage temperature Operating junction and storage temperature range R R 50.0 25.0 JA JL TA +150 TJ, TSTG -50 to +175 Notes: (1) Reverse recovery test conditions: IF=0.5A, IR=1.0A, Irr=0.25A (2) Measured at 1.0MHz and applied reverse voltage of 4.0 volts (3) Thermal resistance from junction to ambient and from junction to lead at 0.375 (9.5mm) lead length, P.C.B. mounted 1 /W RATINGS AND CHARACTERISTIC CURVES 2