TI SN74AUC2G86DCTR

SN74AUC2G86
DUAL 2-INPUT EXCLUSIVE-OR GATE
SCES479 – AUGUST 2003
D
D
D
D
D
D
D
D
D
DCT OR DCU PACKAGE
(TOP VIEW)
Available in the Texas Instruments
NanoStar and NanoFree Packages
Optimized for 1.8-V Operation and Is 3.6-V
I/O Tolerant to Support Mixed-Mode Signal
Operation
Ioff Supports Partial-Power-Down Mode
Operation
Sub 1-V Operable
Max tpd of 1.7 ns at 1.8 V
Low Power Consumption, 10-µA Max ICC
±8-mA Output Drive at 1.8 V
Latch-Up Performance Exceeds 100 mA Per
JESD 78, Class II
ESD Protection Exceeds JESD 22
– 2000-V Human-Body Model (A114-A)
– 200-V Machine Model (A115-A)
– 1000-V Charged-Device Model (C101)
1A
1B
2Y
GND
1
8
2
7
3
6
4
5
VCC
1Y
2B
2A
YEP OR YZP PACKAGE
(BOTTOM VIEW)
GND
2Y
1B
1A
4 5
3 6
2 7
1 8
2A
2B
1Y
VCC
description/ordering information
This dual 2-input exclusive - OR gate is operational at 0.8-V to 2.7-V VCC, but is designed specifically for 1.65-V
to 1.95-V VCC operation.
The SN74AUC2G86 performs the Boolean function Y = A ⊕ B or Y = AB + AB in positive logic.
A common application is as a true/complement element. If the input is low, the other input is reproduced in true
form at the output. If the input is high, the signal on the other input is reproduced inverted at the output.
ORDERING INFORMATION
NanoStar – WCSP (DSBGA)
0.23-mm Large Bump – YEP
–40 C to 85
C
–40°C
85°C
ORDERABLE
PART NUMBER
PACKAGE†
TA
TOP-SIDE
MARKING‡
SN74AUC2G86YEPR
Tape and reel
NanoFree – WCSP (DSBGA)
0.23-mm Large Bump – YZP (Pb-free)
_ _ _UH_
SN74AUC2G86YZPR
SSOP – DCT
Tape and reel
SN74AUC2G86DCTR
U86_ _ _
VSSOP – DCU
Tape and reel
SN74AUC2G86DCUR
U86_
† Package drawings, standard packing quantities, thermal data, symbolization, and PCB design guidelines are available
at www.ti.com/sc/package.
‡ DCT: The actual top-side marking has three additional characters that designate the year, month, and assembly/test site.
DCU: The actual top-side marking has one additional character that designates the assembly/test site.
YEP/YZP: The actual top-side marking has three preceding characters to denote year, month, and sequence code, and
one following character to designate the assembly/test site.
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
NanoStar and NanoFree are trademarks of Texas Instruments.
Copyright  2003, Texas Instruments Incorporated
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of Texas Instruments
standard warranty. Production processing does not necessarily include
testing of all parameters.
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
1
SN74AUC2G86
DUAL 2-INPUT EXCLUSIVE-OR GATE
SCES479 – AUGUST 2003
description/ordering information (continued)
NanoStar and NanoFree package technology is a major breakthrough in IC packaging concepts, using the
die as the package.
This device is fully specified for partial-power-down applications using Ioff. The Ioff circuitry disables the outputs,
preventing damaging current backflow through the device when it is powered down.
FUNCTION TABLE
(each gate)
INPUTS
A
B
OUTPUT
Y
L
L
L
L
H
H
H
L
H
H
H
L
exclusive-OR logic
An exclusive-OR gate has many applications, some of which can be represented better by alternative
logic symbols.
EXCLUSIVE OR
=1
These are five equivalent exclusive-OR symbols valid for an SN74AUC2G86 gate in positive logic; negation may be shown at any two ports.
LOGIC-IDENTITY ELEMENT
=
The output is active (low) if
all inputs stand at the same
logic level (i.e., A = B).
2
EVEN-PARITY ELEMENT
2k
The output is active (low) if
an even number of inputs
(i.e., 0 or 2) are active.
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
ODD-PARITY ELEMENT
2k + 1
The output is active (high) if
an odd number of inputs
(i.e., only 1 of the 2) are
active.
SN74AUC2G86
DUAL 2-INPUT EXCLUSIVE-OR GATE
SCES479 – AUGUST 2003
absolute maximum ratings over operating free-air temperature range (unless otherwise noted)†
Supply voltage range, VCC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . –0.5 V to 3.6 V
Input voltage range, VI (see Note 1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . –0.5 V to 3.6 V
Voltage range applied to any output in the high-impedance or power-off state, VO
(see Note 1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . –0.5 V to 3.6 V
Output voltage range, VO (see Note 1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . –0.5 V to VCC + 0.5 V
Input clamp current, IIK (VI < 0) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . –50 mA
Output clamp current, IOK (VO < 0) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . –50 mA
Continuous output current, IO . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ±20 mA
Continuous current through VCC or GND . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ±100 mA
Package thermal impedance, θJA (see Note 2): DCT package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 220°C/W
DCU package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 227°C/W
YEP/YZP package . . . . . . . . . . . . . . . . . . . . . . . . . . . 102°C/W
Storage temperature range, Tstg . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . –65°C to 150°C
† Stresses beyond those listed under “absolute maximum ratings” may cause permanent damage to the device. These are stress ratings only, and
functional operation of the device at these or any other conditions beyond those indicated under “recommended operating conditions” is not
implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
NOTES: 1. The input negative-voltage and output voltage ratings may be exceeded if the input and output current ratings are observed.
2. The package thermal impedance is calculated in accordance with JESD 51-7.
recommended operating conditions (see Note 3)
VCC
VIH
Supply voltage
High-level input voltage
VCC = 0.8 V
VCC = 1.1 V to 1.95 V
VCC = 2.3 V to 2.7 V
VCC = 0.8 V
MIN
MAX
0.8
2.7
VCC
0.65 × VCC
UNIT
V
V
1.7
0
0.35 × VCC
VIL
Low-level input voltage
VI
VO
Input voltage
0
3.6
V
Output voltage
0
VCC
–0.7
V
VCC = 1.1 V to 1.95 V
VCC = 2.3 V to 2.7 V
VCC = 0.8 V
VCC = 1.1 V
IOH
IOL
∆t/∆v
High-level output current
Low-level output current
0.7
–3
VCC = 1.4 V
VCC = 1.65 V
–5
VCC = 2.3 V
VCC = 0.8 V
–9
mA
–8
0.7
VCC = 1.1 V
VCC = 1.4 V
3
VCC = 1.65 V
VCC = 2.3 V
8
Input transition rise or fall rate
V
5
mA
9
20
ns/V
TA
Operating free-air temperature
–40
85
°C
NOTE 3: All unused inputs of the device must be held at VCC or GND to ensure proper device operation. Refer to the TI application report,
Implications of Slow or Floating CMOS Inputs, literature number SCBA004.
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
3
SN74AUC2G86
DUAL 2-INPUT EXCLUSIVE-OR GATE
SCES479 – AUGUST 2003
electrical characteristics over recommended operating free-air temperature range (unless
otherwise noted)
PARAMETER
TEST CONDITIONS
VCC
0.8 V to 2.7 V
IOH = –100 µA
IOH = –0.7 mA
VOH
VOL
II
Ioff
A or B inputs
ICC
Ci
TYP†
MIN
MAX
0.8 V
0.55
IOH = –3 mA
IOH = –5 mA
1.1 V
0.8
1.4 V
1
IOH = –8 mA
IOH = –9 mA
1.65 V
1.2
2.3 V
1.8
IOL = 100 µA
IOL = 0.7 mA
0.8 V to 2.7 V
V
0.2
0.8 V
0.25
IOL = 3 mA
IOL = 5 mA
1.1 V
0.3
1.4 V
0.4
IOL = 8 mA
IOL = 9 mA
1.65 V
0.45
2.3 V
0.6
VI = VCC or GND
VI or VO = 2.7 V
VI = VCC or GND,
VI = VCC or GND
IO = 0
UNIT
VCC–0.1
V
0 to 2.7 V
±5
µA
0
±10
µA
10
µA
0.8 V to 2.7 V
2.5 V
2.5
pF
† All typical values are at TA = 25°C.
switching characteristics over recommended operating free-air temperature range, CL = 15 pF
(unless otherwise noted) (see Figure 1)
PARAMETER
tpd
VCC = 1.2 V
± 0.1 V
VCC = 1.5 V
± 0.1 V
VCC = 1.8 V
± 0.15 V
VCC = 2.5 V
± 0.2 V
FROM
(INPUT)
TO
(OUTPUT)
VCC = 0.8 V
TYP
MIN
MAX
MIN
MAX
MIN
TYP
MAX
MIN
MAX
A or B
Y
5.3
0.8
3.8
0.5
2.6
0.4
1
1.7
0.3
1.3
UNIT
ns
switching characteristics over recommended operating free-air temperature range, CL = 30 pF
(unless otherwise noted) (see Figure 1)
PARAMETER
tpd
FROM
(INPUT)
TO
(OUTPUT)
A or B
Y
VCC = 1.8 V
± 0.15 V
VCC = 2.5 V
± 0.2 V
MIN
TYP
MAX
MIN
MAX
0.8
1.5
2.6
0.7
2
UNIT
ns
operating characteristics, TA = 25°C
PARAMETER
Cpd
4
Power dissipation
capacitance
TEST
CONDITIONS
f = 10 MHz
VCC = 0.8 V
TYP
15
POST OFFICE BOX 655303
VCC = 1.2 V
TYP
VCC = 1.5 V
TYP
15
• DALLAS, TEXAS 75265
16
VCC = 1.8 V
TYP
19
VCC = 2.5 V
TYP
27
UNIT
pF
SN74AUC2G86
DUAL 2-INPUT EXCLUSIVE-OR GATE
SCES479 – AUGUST 2003
PARAMETER MEASUREMENT INFORMATION
2 × VCC
S1
RL
From Output
Under Test
Open
GND
CL
(see Note A)
RL
VCC
0.8 V
1.2 V ± 0.1 V
1.5 V ± 0.1 V
1.8 V ± 0.15 V
2.5 V ± 0.2 V
1.8 V ± 0.15 V
2.5 V ± 0.2 V
LOAD CIRCUIT
TEST
S1
tPLH/tPHL
tPLZ/tPZL
tPHZ/tPZH
Open
2 × VCC
GND
CL
RL
15 pF
15 pF
15 pF
15 pF
15 pF
30 pF
30 pF
2 kΩ
2 kΩ
2 kΩ
2 kΩ
2 kΩ
1 kΩ
500 Ω
V∆
0.1 V
0.1 V
0.1 V
0.15 V
0.15 V
0.15 V
0.15 V
VCC
Timing Input
VCC/2
0V
tw
tsu
VCC
VCC/2
Input
th
VCC
VCC/2
VCC/2
Data Input
VCC/2
0V
0V
VOLTAGE WAVEFORMS
PULSE DURATION
VOLTAGE WAVEFORMS
SETUP AND HOLD TIMES
VCC
VCC/2
Input
0V
tPHL
tPLH
VOH
VCC/2
Output
VCC/2
VOL
tPHL
Output
Waveform 1
S1 at 2 × VCC
(see Note B)
VOH
Output
VCC/2
VCC/2
VOL
VOLTAGE WAVEFORMS
PROPAGATION DELAY TIMES
INVERTING AND NONINVERTING OUTPUTS
VCC/2
0V
tPLZ
tPZL
VCC
VCC/2
Output
Waveform 2
S1 at GND
(see Note B)
VOL + V∆
VOL
tPHZ
tPZH
tPLH
VCC/2
VCC
Output
Control
VCC/2
VCC/2
VOH – V∆
VOH
≈0 V
VOLTAGE WAVEFORMS
ENABLE AND DISABLE TIMES
LOW- AND HIGH-LEVEL ENABLING
NOTES: A. CL includes probe and jig capacitance.
B. Waveform 1 is for an output with internal conditions such that the output is low except when disabled by the output control.
Waveform 2 is for an output with internal conditions such that the output is high except when disabled by the output control.
C. All input pulses are supplied by generators having the following characteristics: PRR ≤ 10 MHz, ZO = 50 Ω, slew rate ≥ 1 V/ns.
D. The outputs are measured one at a time with one transition per measurement.
E. tPLZ and tPHZ are the same as tdis.
F. tPZL and tPZH are the same as ten.
G. tPLH and tPHL are the same as tpd.
H. All parameters and waveforms are not applicable to all devices.
Figure 1. Load Circuit and Voltage Waveforms
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
5
MECHANICAL DATA
MPDS049B – MAY 1999 – REVISED OCTOBER 2002
DCT (R-PDSO-G8)
PLASTIC SMALL-OUTLINE PACKAGE
0,30
0,15
0,65
8
0,13 M
5
0,15 NOM
ÇÇÇÇÇ
ÇÇÇÇÇ
ÇÇÇÇÇ
ÇÇÇÇÇ
2,90
2,70
4,25
3,75
Gage Plane
PIN 1
INDEX AREA
1
0,25
4
0° – 8°
3,15
2,75
0,60
0,20
1,30 MAX
Seating Plane
0,10
0,10
0,00
NOTES: A.
B.
C.
D.
4188781/C 09/02
All linear dimensions are in millimeters.
This drawing is subject to change without notice.
Body dimensions do not include mold flash or protrusion
Falls within JEDEC MO-187 variation DA.
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
1
IMPORTANT NOTICE
Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, modifications,
enhancements, improvements, and other changes to its products and services at any time and to discontinue
any product or service without notice. Customers should obtain the latest relevant information before placing
orders and should verify that such information is current and complete. All products are sold subject to TI’s terms
and conditions of sale supplied at the time of order acknowledgment.
TI warrants performance of its hardware products to the specifications applicable at the time of sale in
accordance with TI’s standard warranty. Testing and other quality control techniques are used to the extent TI
deems necessary to support this warranty. Except where mandated by government requirements, testing of all
parameters of each product is not necessarily performed.
TI assumes no liability for applications assistance or customer product design. Customers are responsible for
their products and applications using TI components. To minimize the risks associated with customer products
and applications, customers should provide adequate design and operating safeguards.
TI does not warrant or represent that any license, either express or implied, is granted under any TI patent right,
copyright, mask work right, or other TI intellectual property right relating to any combination, machine, or process
in which TI products or services are used. Information published by TI regarding third-party products or services
does not constitute a license from TI to use such products or services or a warranty or endorsement thereof.
Use of such information may require a license from a third party under the patents or other intellectual property
of the third party, or a license from TI under the patents or other intellectual property of TI.
Reproduction of information in TI data books or data sheets is permissible only if reproduction is without
alteration and is accompanied by all associated warranties, conditions, limitations, and notices. Reproduction
of this information with alteration is an unfair and deceptive business practice. TI is not responsible or liable for
such altered documentation.
Resale of TI products or services with statements different from or beyond the parameters stated by TI for that
product or service voids all express and any implied warranties for the associated TI product or service and
is an unfair and deceptive business practice. TI is not responsible or liable for any such statements.
Following are URLs where you can obtain information on other Texas Instruments products and application
solutions:
Products
Amplifiers
Applications
amplifier.ti.com
Audio
www.ti.com/audio
Data Converters
dataconverter.ti.com
Automotive
www.ti.com/automotive
DSP
dsp.ti.com
Broadband
www.ti.com/broadband
Interface
interface.ti.com
Digital Control
www.ti.com/digitalcontrol
Logic
logic.ti.com
Military
www.ti.com/military
Power Mgmt
power.ti.com
Optical Networking
www.ti.com/opticalnetwork
Microcontrollers
microcontroller.ti.com
Security
www.ti.com/security
Telephony
www.ti.com/telephony
Video & Imaging
www.ti.com/video
Wireless
www.ti.com/wireless
Mailing Address:
Texas Instruments
Post Office Box 655303 Dallas, Texas 75265
Copyright  2003, Texas Instruments Incorporated