NEW Calibrated Xenon Light Source L7810 is a logo mark for an accreditation system based on Japanese Measurement Law. Our Planning & Engineering Division is accredited in accordance with ISO/IEC Guide 25: 1990 in the field of photometry calibration. (Our accreditation number is 0081.) [JCSS: Japan Calibration Service System (The Japanese Goverment accreditation scheme for calibration laboratories and a signatory of APLAC Mutual Recognition Arrangement)] ▲LEFT: LAMP HOUSING, RIGHT: POWER SUPPLY FEATURES ■High Stability ■High Power Stability is one of the important characteristics of calibrated light sources. Hamamatsu’s excellent cathode technology and optimized lamp housing realize high stability and good repeatability. A Xenon lamp emits high intense UV, visible and IR light so that a reliable measurement can be possible even in the range of 300 nm to 400 nm, where either a deuterium lamp or a tungsten lamp doesn’t deliver enough light. ●Light Intensity Drift (Typ.) TLSOB0065EA 100 SPECTRAL IRRADIANCE (µW·cm-2·nm-1) 110 ●Comparison of Spectral Irradiance (Reference data) : 50 cm away from light source RELATIVE INTENSITY (%) 100 90 80 70 60 50 40 30 20 10 0 10 20 30 40 50 60 70 OPERATING TIME (h) 80 90 100 110 TLSOB0063EA 10 CALIBRATED XENON LIGHT SOURCE 1 CONVENTIONAL HALOGEN LAMP 0.1 CONVENTIONAL DEUTERIUM LAMP 0.01 0.001 200 250 300 350 400 450 500 550 WAVELENGTH (nm) 600 650 700 750 800 SPECIFICATIONS Lamp Input Wattage Spectral Distribution Calibrated RangeA Type of Calibration Calibration Unit Stability Fluctuation (p-p) Drift Window Material (Lamp Housing) Warm-up Time Recommended Calibration PeriodB Guaranteed LifeC Input Voltage (switched manually) Power Consumption Cooling (Lamp Housing, Power Supply) Ambient Temperature Humidity Dimensions Lamp Housing (W × H × D) Power Supply CaseD Lamp Housing Weight Power Supply CaseD Xenon Lamp 150 W 185 nm to 2000 nm 250 nm to 800 nm Spectral Irradiance µW.cm-2.nm-1 1.0 % Max. ±0.5 %/h Max. Synthetic Silica 10 min 100 hours or 1 year whichever comes first 500 hours 100 Vac/115 Vac/200 Vac/230 Vac (±10 %), 50/60 Hz 500 VA Forces Air Cooling (cooling fan is included) 0 °C to 40 °C 30 % to 90 % 100 mm × 280 mm × 100 mm 144 mm × 176 mm × 280 mm 595 mm × 425 mm × 345 mm Approx. 3.5 kg Approx. 10 kg Approx. 7.8 kg NOTE: AThe calibrated value is the light power at 50 cm away from front surface of lamp housing. BThis is the recommended calibration period when high reliability is required. Please contact to our sales office for re-calibration fee. CThis is the guaranteed time the unit satisfies requirements as calibrated light source. DThis is an accessory coming with the unit. DIMENSIONAL OUTLINES (Unit: mm) LAMP HOUSING POWER SUPPLY [FRONT VIEW] [SIDE VIEW] COOLING FAN SIDE COVER MOUNTING SCREW 4-M3 HEX SOCKET HEAD BOLT SIDE COVER (REMOVE THIS COVER WHEN REPLACING LAMP) 144 280 M37 P=1 XENON LAMP POWER SUPPLY SN. TIME COUNTER OUTPUT WINDOW ( 28) 77 60 280 hours 0.0 M 1A/125V CURRENT SEL 8.0 8.5 176 7.5 LAMP ON 140 [Adc] POWER POWER INTER LOCK OUTPUT 100/115/200/230 50/60 HZ VOL. SEL 5 OVER HEAT CONNECTOR * 5 50 100 5 [FRONT VIEW] 100 [SIDE VIEW] [BOTTOM VIEW] [REAR VIEW] CONNECTOR * REFERENCE SURFACE OF CALIBRATION AC INPUT CONNECTOR 39 78 M4 39 4-M4 PLASTIC FEET ARE ATTACHED TO THE BOTTOM OF THE UNIT BUT CAN BE REMOVED TO USE THEIR HOLES FOR INSTALLATION OF THE LAMP HOUSING. * For cable to connect lamp housing with power supply, length: 2000 78 TLSOA0066EA TLSOA0067EA Subject to local technical requirements and regulations, availability of products included in this promotional material may vary. Please consult with our sales office. Information furnished by HAMAMATSU is believed to be reliable. However, no responsibility is assumed for possible inaccuracies or omissions. Specifications are subject to change without notice. No patent rights are granted to any of the circuits described herein. ©2000 Hamamatsu Photonics K.K HOMEPAGE URL http://www.hamamatsu.com HAMAMATSU PHOTONICS K.K., Electron Tube Center 314-5, Shimokanzo, Toyooka-village, Iwata-gun, Shizuoka-ken, 438-0193, Japan, Telephone: (81)539/62-5248, Fax: (81)539/62-2205 U.S.A.: Hamamatsu Corporation: 360 Foothill Road, P. O. Box 6910, Bridgewater. N.J. 08807-0910, U.S.A., Telephone: (1)908-231-0960, Fax: (1)908-231-1218 E-mail: [email protected] Germany: Hamamatsu Photonics Deutschland GmbH: Arzbergerstr. 10, D-82211 Herrsching am Ammersee, Germany, Telephone: (49)8152-375-0, Fax: (49)8152-2658 E-mail: [email protected] France: Hamamatsu Photonics France S.A.R.L.: 8, Rue du Saule Trapu, Parc du Moulin de Massy, 91882 Massy Cedex, France, Telephone: (33)1 69 53 71 00, Fax: (33)1 69 53 71 10 E-mail: [email protected] United Kingdom: Hamamatsu Photonics UK Limited: Lough Point, 2 Gladbeck Way, Windmill Hill, Enfield, Middlesex EN2 7JA, United Kingdom, Telephone: 44(20)8-367-3560, Fax: 44(20)8-367-6384 E-mail: [email protected] North Europe: Hamamatsu Photonics Norden AB: Smidesvägen 12, SE-171-41 SOLNA, Sweden, Telephone: (46)8-509-031-00, Fax: (46)8-509-031-01 E-mail: [email protected] Italy: Hamamatsu Photonics Italia: S.R.L.: Strada della Moia, 1/E, 20020 Arese, (Milano), Italy, Telephone: (39)02-935 81 733, Fax: (39)02-935 81 741 E-mail: [email protected] TLSO1039E01 JUN. 2000 SI Printed in Japan(1000)