AZ920 ULTRA-SENSITIVE SUBMINIATURE RELAY FEATURES • Extremely small footprint utilizing only 0.16 square inch of PCB area • Thin vertical profile only 0.2" wide • Slim SIP package • 1 Form A contact with up to 5 Amp switching capability • High sensitivity, 58 mW pickup • Dielectric strength 2500 Vrms contact to coil • Epoxy sealed • UL, CUR file E43203 • TÜV file R50018790 CONTACTS GENERAL DATA Arrangement SPST (1 Form A) Single button contact or bifurcated Ratings Resistive load: Rated Load UL, CUR TÜV Life Expectancy Mechanical Electrical Minimum operations 20 million operations 1 X 105 at 5 A, 30 VDC or 250 VAC Max. switched power: 150 W or 1250 VA Max. switched current: 5 A Max. switched voltage: 150* VDC or 250 VAC Operate Time (typical) 6 ms at nominal coil voltage Release Time (typical) 3 ms at nominal coil voltage (with no coil suppression) *Note: If switching voltage is greater than 30 VDC, special precautions must be taken. Please contact the factory. Dielectric Strength 1000 Vrms between open contacts (at sea level for 1 min.) 2500 Vrms contact to coil Insulation Resistance 1000 megohms min. at 20°C, 500 VDC, 50% RH Dropout Greater than 10% of nominal coil voltage 5 A at 30 VDC or 250 VAC Resistive, 100k cycles [1] 3 A at 30 VDC or 250 VAC General Use, 75k cycles[2] 3 A at 30 VDC or 250 VAC Resistive, 75k cycles [2] Ambient Temperature Operating Storage At nominal coil voltage -40°C (-40°F) to 85°C (185°F) -40°C (-40°F) to 105°C (221°F) [1] Single button contacts [2] Bifurcated contacts Vibration 0.062" (1.5 mm) DA at 10–55 Hz Shock 15 g Enclosure P.B.T. polyester Terminals Tinned copper alloy, P.C. Max. Solder Temp. 270°C (518°F) Max. Solder Time 5 seconds Max. Solvent Temp. 80°C (176°F) Max. Immersion Time 30 seconds Weight 3 grams Packing unit in pcs 100 per plastic tube / 1000 per carton box 5 A at 30 VDC or 250 VAC General Use, 100k cycles [1] Material Silver nickel (single button or bifurcated contacts), or silver tin oxide (single button contacts), gold plating available Resistance < 50 milliohms initially COIL Power At Pickup Voltage (typical) 58 mW (5-18 V coils) 88 mW (24 V coil) Max. Continuous Dissipation 1.3 W at 20°C (68°F) ambient Temperature Rise 12°C (22°F) 5-18 V coils 17°C (31°F) 24 V coil at nominal coil voltage Temperature Max. 130°C (266°F) Class B Max. 155°C (311°F) Class F ZETTLER NOTES 1. All values at 20°C (68°F). 2. Relay may pull in with less than “Must Operate” value. 3. Specifications subject to change without notice. electronics GmbH Junkersstrasse 3, D-82178 Puchheim, Germany Tel. +49 89 800 97 0 Fax +49 89 800 97 200 [email protected] www.ZETTLERelectronics.com 2004-06-02 AZ920 RELAY ORDERING DATA COIL SPECIFICATIONS Nominal Coil VDC 5 Must Operate VDC 3.5 Max. Continuous VDC 16.5 Coil Resistance Ohm ± 10% 208 6 4.2 19.9 300 9 6.3 29.8 675 12 8.4 39.8 1,200 AZ920–1A–12DE 18 12.6 59.6 2,700 AZ920–1A–18DE 24 16.8 65.0 3,200 AZ920–1A–24DE ORDER NUMBER* AZ920–1A–5DE AZ920–1A–6DE AZ920–1A–9DE * Substitute “-1AB” in place of “-1A” for bifurcated silver nickel contacts. Substitute “-1AH” in place of “-1A for silver tin oxide contacts. Add suffix “A” for gold plated contacts. Add suffix “K” for .3 inch terminal spacing. Add suffix “F” for Class F insulation. MECHANICAL DATA Standard "K" Version .799 Max [20.3] .209 Max [5.3] .209 Max [5.3] .049 [1.25] .028 [0.7] .02 [0.5] .1 [2.54] 0.4 [10.16] 0.2 [5.08] .138 [3.5] .138 [3.5] .504 Max [12.8] .504 Max [12.8] .799 Max [20.3] .035 [0.9] .012 [0.3] .02 [0.5] .1 [2.54] 0.3 [7.62] 0.3 [7.62] PCB BOARD LAYOUT .1 [2.54] .4 [10.16] .035 [0.9] .012 [0.3] WIRING DIAGRAM Standard 2x.039 [Ø1] .049 [1.25] .028 [0.7] "K" Version 2x.039 [Ø1] 2x.047 [Ø1.2] .2 [5.08] .1 [2.54] .3 [7.62] 2x.047 [Ø1.2] .3 [7.62] 1 2 3 4 Viewed Toward Terminals Dimensions in inches with metric equivalents in parentheses. Tolerance: ± .010" ZETTLER electronics GmbH Junkersstrasse 3, D-82178 Puchheim, Germany Tel. +49 89 800 97 0 Fax +49 89 800 97 200 [email protected] www.ZETTLERelectronics.com 2004-06-02